ThrottleStop features a variety of options which can be used to bypass CPU throttling and a monitoring panel that shows you the current state of each thread on your CPU.Some laptops are using clock modulation and multiplier reductions to lower the performance and power consumption of your computer. This is done deliberately to either allow your computer to run cooler or to allow your laptop to operate with a power adapter that is not sufficient to fully power your laptop and recharge its battery at the same time.When using ThrottleStop, it is strongly recommended to monitor power consumption at the wall with a Kill-a-Watt meter or similar device and make sure that you don't exceed the power capabilities of your power adapter. Use of ThrottleStop to bypass these throttling schemes is at your own risk and can result in permanent damage to your power adapter or computer or both which may not be covered by your warranty.What's New9.7:Added per profile adjustment of the turbo power limits, Speed Shift Min Max and PROCHOT offset values.Added core and cache V/F tuning to the FIVR window for unlocked 10th Gen and newer HX and K series CPUs.Fixed the Notification Area icons for improved Windows 11 compatibility.Fixed the power plan selector and increased the number of selections from 8 to 12.BD PROCHOT is now automatically locked when it is disabled.Changed the DDR memory speed monitoring method.Added an option so the Safe Start feature can be toggled on or off.9.5:Alder Lake desktop and mobile support added.Improved performance when using Windows Defender Real-time Protection.Replaced the Disable and Lock Turbo Power Limits box with the MMIO Lock box.Added the ability to sync the MSR and MMIO power limits.Improved SpeedStep and Speed Shift compatibility with Windows.Updated FIVR and TPL window themes and added support for bigger logos up to 240x138 recommended.Combined Turbo Limits and Turbo Groups into the FIVR window.Added feature for K series CPUs to increase voltage at 800 MHz for improved stability when undervolting.Reduced the chance of a BSOD loop if voltage is set too low.Added automatic enabling of the PowerCut feature when resuming from sleep.Disabled Run Program After Profile Change feature for improved security.Retired Core 2 Duo automatic Dual IDA mode.9.4.6 Beta:replaced the Disable and Lock Turbo Power Limits box with the MMIO Lock box.updated FIVR and TPL window themes and added support for bigger logos up to 240x138 recommended.combined Turbo Limits and Turbo Groups into the FIVR window.added feature to increase CPU voltage at 800 MHz for improved stability when undervolting.improved SpeedStep and Speed Shift compatibility with Windows.reduced the chance of a BSOD loop if voltage is set too low.added automatic enabling of the PowerCut feature when resuming from sleep.retired Core 2 Duo automatic Dual IDA mode.9.4.3 Beta:Alder Lake desktop and mobile support added.9.4.2 Beta:Added ability to sync MSR and MMIO power limits.Disabled Log Folder dialog.Disabled Run Program After Profile Change feature.9.4 Stable:Fixed the FIVR - Disable and Lock MMIO feature for 11th Gen CPUs.Added separate reporting of the MSR and MMIO power limits.Added feature to disable all C states higher than C1.Added access to the Ring Down Bin setting.Enabled Limit Reasons for Skylake X.Updated driver for improved security.Fixed power plan list for languages other than English.Changed system monitoring timers being used.