• 6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTO

    Cases News 6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTOJune 9, 2025Last Updated: 2025-06-09We cover Phanteks’ new G370A budget case, the XT M3, and the Evolv X2 MatrixThe HighlightsPhanteks’ new X2 Matrix case has 900 LEDs and is aiming to be around Phanteks’ G370A is a case that includes 3x120mm fansThe company has a new T30-140 fan that required 6 years of engineering to makeTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Phanteks’ suite at Computex 2025 and the company showed off several cases along with a fan that took the company roughly 6 years to make.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangPhanteks Matrix CasesWe’ve talked about Phanteks’ X2 case in the past but the company was showing off its new Matrix version, which has matrix LEDs. The X2 Matrix has 900 LEDs in a 10x90 layout. It’s supposed to be about to more expensive than the base X2, which means it should end up around   The interesting thing about the case is that the LEDs wrap around the chassis. In terms of communication, the LEDs connect to the motherboard via USB 2.0 and use SATA for power. This allows Phanteks to bypass a WinRing 0 type situation. Another Matrix case had 600 of them in a 10x60 LED configuration and is supposed to be about  Phanteks also has software that allows you to reconfigure what the LEDs display. When we got to the company’s suite, it had been programmed to say, “Gamers Nexus here,” which was cool to see. We also saw that the LEDs can also be used to highlight CPU temperature. Phanteks G370A Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!Phanteks also showed off its G370A case, which is a case that includes 3x120mm fans in the front coupled with a mesh front that offers 38% hole porosity. The company tells us that manufacturing typically offers around 25% porosity.  It has a glass side panel and the back side panel of the case is just steel and has no ventilation. Taking a look at the placement of the front fans, we asked Phanteks why they weren’t higher on the case so the bottom fan could get more exposure to the bottom power supply shroud area and the answer the company gave us was simply clearance for a 360mm radiator at the top. There’s not a lot of room for the air coming into the shroud. Some of it will go through the cable pass-through if it’s empty. The back of the case features a drive mount.XTM3The company also showed off a Micro ATX case called the XTM3. It comes with 3 fans and is For its front panel, it has a unique punch out for its fans. The top panel is part standard ventilation but it does have one side that provides less airflow, which covers where the PSU would exhaust out of. The side panel does have punch-outs for the PSU, however. We don’t test power supplies, though that may change in the future. Power supplies can take a lot of thermal abuse, however, so we’re not super concerned here.  The case should be shipping in the next month or so and is 39.5 liters, which includes the feet. We appreciate that as not a lot of companies will factor that in. There’s also a lot of cable management depth on the back and the case also supports BTF. In addition, there’s a panel that clamps down all of the power supply cables. T30 FanPhanteks’ T30 fan took the company 6 years to make and is a 140mm fan. The company is competing with Noctua in the high-end fan space, but is going for a grey theme instead of brown. Phanteks CTO Tenzin Rongen Interview Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.Finally, we interviewed Phanteks CTO Tenzin Rongen to discuss technical details behind the company’s long-developed fans. Make sure to check it out in our video.
    #years #make #fan #g370a #budget
    6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTO
    Cases News 6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTOJune 9, 2025Last Updated: 2025-06-09We cover Phanteks’ new G370A budget case, the XT M3, and the Evolv X2 MatrixThe HighlightsPhanteks’ new X2 Matrix case has 900 LEDs and is aiming to be around Phanteks’ G370A is a case that includes 3x120mm fansThe company has a new T30-140 fan that required 6 years of engineering to makeTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Phanteks’ suite at Computex 2025 and the company showed off several cases along with a fan that took the company roughly 6 years to make.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangPhanteks Matrix CasesWe’ve talked about Phanteks’ X2 case in the past but the company was showing off its new Matrix version, which has matrix LEDs. The X2 Matrix has 900 LEDs in a 10x90 layout. It’s supposed to be about to more expensive than the base X2, which means it should end up around   The interesting thing about the case is that the LEDs wrap around the chassis. In terms of communication, the LEDs connect to the motherboard via USB 2.0 and use SATA for power. This allows Phanteks to bypass a WinRing 0 type situation. Another Matrix case had 600 of them in a 10x60 LED configuration and is supposed to be about  Phanteks also has software that allows you to reconfigure what the LEDs display. When we got to the company’s suite, it had been programmed to say, “Gamers Nexus here,” which was cool to see. We also saw that the LEDs can also be used to highlight CPU temperature. Phanteks G370A Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!Phanteks also showed off its G370A case, which is a case that includes 3x120mm fans in the front coupled with a mesh front that offers 38% hole porosity. The company tells us that manufacturing typically offers around 25% porosity.  It has a glass side panel and the back side panel of the case is just steel and has no ventilation. Taking a look at the placement of the front fans, we asked Phanteks why they weren’t higher on the case so the bottom fan could get more exposure to the bottom power supply shroud area and the answer the company gave us was simply clearance for a 360mm radiator at the top. There’s not a lot of room for the air coming into the shroud. Some of it will go through the cable pass-through if it’s empty. The back of the case features a drive mount.XTM3The company also showed off a Micro ATX case called the XTM3. It comes with 3 fans and is For its front panel, it has a unique punch out for its fans. The top panel is part standard ventilation but it does have one side that provides less airflow, which covers where the PSU would exhaust out of. The side panel does have punch-outs for the PSU, however. We don’t test power supplies, though that may change in the future. Power supplies can take a lot of thermal abuse, however, so we’re not super concerned here.  The case should be shipping in the next month or so and is 39.5 liters, which includes the feet. We appreciate that as not a lot of companies will factor that in. There’s also a lot of cable management depth on the back and the case also supports BTF. In addition, there’s a panel that clamps down all of the power supply cables. T30 FanPhanteks’ T30 fan took the company 6 years to make and is a 140mm fan. The company is competing with Noctua in the high-end fan space, but is going for a grey theme instead of brown. Phanteks CTO Tenzin Rongen Interview Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.Finally, we interviewed Phanteks CTO Tenzin Rongen to discuss technical details behind the company’s long-developed fans. Make sure to check it out in our video. #years #make #fan #g370a #budget
    GAMERSNEXUS.NET
    6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTO
    Cases News 6 Years to Make a Fan, G370A Budget Case, & Phanteks Technical Fan Discussion, ft. CTOJune 9, 2025Last Updated: 2025-06-09We cover Phanteks’ new G370A budget case, the XT M3, and the Evolv X2 MatrixThe HighlightsPhanteks’ new X2 Matrix case has 900 LEDs and is aiming to be around $200Phanteks’ G370A is a $60 case that includes 3x120mm fansThe company has a new T30-140 fan that required 6 years of engineering to makeTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Phanteks’ suite at Computex 2025 and the company showed off several cases along with a fan that took the company roughly 6 years to make.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangPhanteks Matrix CasesWe’ve talked about Phanteks’ X2 case in the past but the company was showing off its new Matrix version, which has matrix LEDs. The X2 Matrix has 900 LEDs in a 10x90 layout. It’s supposed to be about $30 to $40 more expensive than the base X2, which means it should end up around $200.  The interesting thing about the case is that the LEDs wrap around the chassis. In terms of communication, the LEDs connect to the motherboard via USB 2.0 and use SATA for power. This allows Phanteks to bypass a WinRing 0 type situation. Another Matrix case had 600 of them in a 10x60 LED configuration and is supposed to be about $120. Phanteks also has software that allows you to reconfigure what the LEDs display. When we got to the company’s suite, it had been programmed to say, “Gamers Nexus here,” which was cool to see. We also saw that the LEDs can also be used to highlight CPU temperature. Phanteks G370A Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a direct donation or a Patreon contribution!)Phanteks also showed off its G370A case, which is a $60 case that includes 3x120mm fans in the front coupled with a mesh front that offers 38% hole porosity. The company tells us that manufacturing typically offers around 25% porosity.  It has a glass side panel and the back side panel of the case is just steel and has no ventilation. Taking a look at the placement of the front fans, we asked Phanteks why they weren’t higher on the case so the bottom fan could get more exposure to the bottom power supply shroud area and the answer the company gave us was simply clearance for a 360mm radiator at the top. There’s not a lot of room for the air coming into the shroud. Some of it will go through the cable pass-through if it’s empty. The back of the case features a drive mount.XTM3The company also showed off a Micro ATX case called the XTM3. It comes with 3 fans and is $70. For its front panel, it has a unique punch out for its fans. The top panel is part standard ventilation but it does have one side that provides less airflow, which covers where the PSU would exhaust out of. The side panel does have punch-outs for the PSU, however. We don’t test power supplies, though that may change in the future. Power supplies can take a lot of thermal abuse, however, so we’re not super concerned here.  The case should be shipping in the next month or so and is 39.5 liters, which includes the feet. We appreciate that as not a lot of companies will factor that in. There’s also a lot of cable management depth on the back and the case also supports BTF. In addition, there’s a panel that clamps down all of the power supply cables. T30 FanPhanteks’ T30 fan took the company 6 years to make and is a 140mm fan. The company is competing with Noctua in the high-end fan space, but is going for a grey theme instead of brown. Phanteks CTO Tenzin Rongen Interview Visit our Patreon page to contribute a few dollars toward this website's operation (or consider a direct donation or buying something from our GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.Finally, we interviewed Phanteks CTO Tenzin Rongen to discuss technical details behind the company’s long-developed fans. Make sure to check it out in our video.
    0 Σχόλια 0 Μοιράστηκε
  • One of the most versatile action cameras I've tested isn't from GoPro - and it's on sale

    DJI Osmo Action 4. Adrian Kingsley-Hughes/ZDNETMultiple DJI Osmo Action 4 packages are on sale . Both the Essential and Standard Combos have been discounted to while the Adventure Combo has dropped to DJI might not be the first name on people's lips when it comes to action cameras, but the company that's better known for its drones also has a really solid line of action cameras. And its latest device, the Osmo Action 4 camera, has some very impressive tricks up its sleeve.Also: One of the most versatile cameras I've used is not from Sony or Canon and it's on saleSo, what sets this action camera apart from the competition? Let's take a look.
    details
    View First off, this is not just an action camera -- it's a pro-grade action camera.From a hardware point of view, the Osmo Action 4 features a 1/1.3-inch image sensor that can record 4K at up to 120 frames per second. This sensor is combined with a wide-angle f/2.8 aperture lens that provides an ultra-wide field of view of up to 155°. And that's wide. Build quality and fit and finish are second to none. Adrian Kingsley-Hughes/ZDNETFor when the going gets rough, the Osmo Action 4 offers 360° HorizonSteady stabilization modes, including RockSteady 3.0/3.0+ for first-person video footage and HorizonBalancing/HorizonSteady modes for horizontal shots. That's pro-grade hardware right there.Also: This new AI video editor is an all-in-one production service for filmmakers - how to try itThe Osmo Action 4 also features a 10-bit D-Log M color mode. This mode allows the sensor to record over one billion colors and offers a wider dynamic range, giving you a video that is more vivid and that offers greater detail in the highlights and shadows. This mode, combined with an advanced color temperature sensor, means that the colors have a true-to-life feel regardless of whether you're shooting outdoors, indoors, or even underwater. The DJI Osmo Action 4 ready for action. Adrian Kingsley-Hughes/ZDNETI've added some video output from the Osmo Action 4 below. There are examples in both 1080p and 4K. To test the stabilization, I attached the camera to the truck and took it on some roads, some of which are pretty rough. The Osmo Action 4 had no problem with that terrain. I also popped the camera into the sea, just because. And again, no problem.I've also captured a few time-lapses with the camera -- not because I like clouds, but pointing a camera at a sky can be a good test of how it handles changing light. Also: I recommend this action camera to beginners and professional creators. Here's whyTimelapses with action cameras can suffer from unsightly exposure changes that cause the image to pulse, a condition known as exposure pumping. This issue can also cause the white balance to change noticeably in a video, but the Osmo Action 4 handled this test well.All the footage I've shot is what I've come to expect from a DJI camera, whether it's from an action camera or drone -- crisp, clear, vivid, and also nice and stable.The Osmo Action 4 is packed with various electronic image-stabilizationtech to ensure that your footage is smooth and on the horizon. It's worth noting the limitations of EIS -- it's not supported in slow-motion and timelapse modes, and the HorizonSteady and HorizonBalancing features are only available for video recorded at 1080por 2.7Kwith a frame rate of 60fps or below. On the durability front, I've no concerns. I've subjected the Osmo Action 4 to a hard few days of testing, and it's not let me down or complained once. It takes impacts like a champ, and being underwater or in dirt and sand is no problem at all. Also: I'm a full-time Canon photographer, but this Nikon camera made me wonder if I'm missing outYou might think that this heavy-duty testing would be hard on the camera's tiny batteries, but you'd be wrong. Remember I said the Osmo Action 4 offered hours of battery life? Well, I wasn't kidding.  The Osmo Action 4's ultra-long life batteries are incredible.  Adrian Kingsley-Hughes/ZDNETDJI says that a single battery can deliver up to 160 minutes of 1080p/24fps video recording. That's over two and a half hours of recording time. In the real world, I was blown away by how much a single battery can deliver. I shot video and timelapse, messed around with a load of camera settings, and then transferred that footage to my iPhone, and still had 16% battery left.No action camera has delivered so much for me on one battery. The two extra batteries and the multifunction case that come as part of the Adventure Combo are worth the extra Adrian Kingsley-Hughes/ZDNETAnd when you're ready to recharge, a 30W USB-C charger can take a battery from zero to 80% in 18 minutes. That's also impressive.What's more, the batteries are resistant to cold, offering up to 150 minutes of 1080p/24fps recording in temperatures as low as -20°C. This resistance also blows the competition away.Even taking into account all these strong points, the Osmo Action 4 offers even more.The camera has 2x digital zoom for better composition, Voice Prompts that let you know what the camera is doing without looking, and Voice Control that lets you operate the device without touching the screen or using the app. The Osmo Action 4 also digitally hides the selfie stick from a variety of different shots, and you can even connect the DJI Mic to the camera via the USB-C port for better audio capture.Also: Yes, an Android tablet finally made me reconsider my iPad Pro loyaltyAs for price, the Osmo Action 4 Standard Combo bundle comes in at while the Osmo Action 4 Adventure Combo, which comes with two extra Osmo Action Extreme batteries, an additional mini Osmo Action quick-release adapter mount, a battery case that acts as a power bank, and a 1.5-meter selfie stick, is I'm in love with the Osmo Action 4. It's hands down the best, most versatile, most powerful action camera on the market today, offering pro-grade features at a price that definitely isn't pro-grade.  Everything included in the Action Combo bundle. DJIDJI Osmo Action 4 tech specsDimensions: 70.5×44.2×32.8mmWeight: 145gWaterproof: 18m, up to 60m with the optional waterproof case Microphones: 3Sensor 1/1.3-inch CMOSLens: FOV 155°, aperture f/2.8, focus distance 0.4m to ∞Max Photo Resolution: 3648×2736Max Video Resolution: 4K: 3840×2880@24/25/30/48/50/60fps and 4K: 3840×2160@24/25/30/48/50/60/100/120fpsISO Range: 100-12800Front Screen: 1.4-inch, 323ppi, 320×320Rear Screen: 2.25-inch, 326ppi, 360×640Front/Rear Screen Brightness: 750±50 cd/m² Storage: microSDBattery: 1770mAh, lab tested to offer up to 160 minutes of runtimeOperating Temperature: -20° to 45° CThis article was originally published in August of 2023 and updated in March 2025.Featured reviews
    #one #most #versatile #action #cameras
    One of the most versatile action cameras I've tested isn't from GoPro - and it's on sale
    DJI Osmo Action 4. Adrian Kingsley-Hughes/ZDNETMultiple DJI Osmo Action 4 packages are on sale . Both the Essential and Standard Combos have been discounted to while the Adventure Combo has dropped to DJI might not be the first name on people's lips when it comes to action cameras, but the company that's better known for its drones also has a really solid line of action cameras. And its latest device, the Osmo Action 4 camera, has some very impressive tricks up its sleeve.Also: One of the most versatile cameras I've used is not from Sony or Canon and it's on saleSo, what sets this action camera apart from the competition? Let's take a look. details View First off, this is not just an action camera -- it's a pro-grade action camera.From a hardware point of view, the Osmo Action 4 features a 1/1.3-inch image sensor that can record 4K at up to 120 frames per second. This sensor is combined with a wide-angle f/2.8 aperture lens that provides an ultra-wide field of view of up to 155°. And that's wide. Build quality and fit and finish are second to none. Adrian Kingsley-Hughes/ZDNETFor when the going gets rough, the Osmo Action 4 offers 360° HorizonSteady stabilization modes, including RockSteady 3.0/3.0+ for first-person video footage and HorizonBalancing/HorizonSteady modes for horizontal shots. That's pro-grade hardware right there.Also: This new AI video editor is an all-in-one production service for filmmakers - how to try itThe Osmo Action 4 also features a 10-bit D-Log M color mode. This mode allows the sensor to record over one billion colors and offers a wider dynamic range, giving you a video that is more vivid and that offers greater detail in the highlights and shadows. This mode, combined with an advanced color temperature sensor, means that the colors have a true-to-life feel regardless of whether you're shooting outdoors, indoors, or even underwater. The DJI Osmo Action 4 ready for action. Adrian Kingsley-Hughes/ZDNETI've added some video output from the Osmo Action 4 below. There are examples in both 1080p and 4K. To test the stabilization, I attached the camera to the truck and took it on some roads, some of which are pretty rough. The Osmo Action 4 had no problem with that terrain. I also popped the camera into the sea, just because. And again, no problem.I've also captured a few time-lapses with the camera -- not because I like clouds, but pointing a camera at a sky can be a good test of how it handles changing light. Also: I recommend this action camera to beginners and professional creators. Here's whyTimelapses with action cameras can suffer from unsightly exposure changes that cause the image to pulse, a condition known as exposure pumping. This issue can also cause the white balance to change noticeably in a video, but the Osmo Action 4 handled this test well.All the footage I've shot is what I've come to expect from a DJI camera, whether it's from an action camera or drone -- crisp, clear, vivid, and also nice and stable.The Osmo Action 4 is packed with various electronic image-stabilizationtech to ensure that your footage is smooth and on the horizon. It's worth noting the limitations of EIS -- it's not supported in slow-motion and timelapse modes, and the HorizonSteady and HorizonBalancing features are only available for video recorded at 1080por 2.7Kwith a frame rate of 60fps or below. On the durability front, I've no concerns. I've subjected the Osmo Action 4 to a hard few days of testing, and it's not let me down or complained once. It takes impacts like a champ, and being underwater or in dirt and sand is no problem at all. Also: I'm a full-time Canon photographer, but this Nikon camera made me wonder if I'm missing outYou might think that this heavy-duty testing would be hard on the camera's tiny batteries, but you'd be wrong. Remember I said the Osmo Action 4 offered hours of battery life? Well, I wasn't kidding.  The Osmo Action 4's ultra-long life batteries are incredible.  Adrian Kingsley-Hughes/ZDNETDJI says that a single battery can deliver up to 160 minutes of 1080p/24fps video recording. That's over two and a half hours of recording time. In the real world, I was blown away by how much a single battery can deliver. I shot video and timelapse, messed around with a load of camera settings, and then transferred that footage to my iPhone, and still had 16% battery left.No action camera has delivered so much for me on one battery. The two extra batteries and the multifunction case that come as part of the Adventure Combo are worth the extra Adrian Kingsley-Hughes/ZDNETAnd when you're ready to recharge, a 30W USB-C charger can take a battery from zero to 80% in 18 minutes. That's also impressive.What's more, the batteries are resistant to cold, offering up to 150 minutes of 1080p/24fps recording in temperatures as low as -20°C. This resistance also blows the competition away.Even taking into account all these strong points, the Osmo Action 4 offers even more.The camera has 2x digital zoom for better composition, Voice Prompts that let you know what the camera is doing without looking, and Voice Control that lets you operate the device without touching the screen or using the app. The Osmo Action 4 also digitally hides the selfie stick from a variety of different shots, and you can even connect the DJI Mic to the camera via the USB-C port for better audio capture.Also: Yes, an Android tablet finally made me reconsider my iPad Pro loyaltyAs for price, the Osmo Action 4 Standard Combo bundle comes in at while the Osmo Action 4 Adventure Combo, which comes with two extra Osmo Action Extreme batteries, an additional mini Osmo Action quick-release adapter mount, a battery case that acts as a power bank, and a 1.5-meter selfie stick, is I'm in love with the Osmo Action 4. It's hands down the best, most versatile, most powerful action camera on the market today, offering pro-grade features at a price that definitely isn't pro-grade.  Everything included in the Action Combo bundle. DJIDJI Osmo Action 4 tech specsDimensions: 70.5×44.2×32.8mmWeight: 145gWaterproof: 18m, up to 60m with the optional waterproof case Microphones: 3Sensor 1/1.3-inch CMOSLens: FOV 155°, aperture f/2.8, focus distance 0.4m to ∞Max Photo Resolution: 3648×2736Max Video Resolution: 4K: 3840×2880@24/25/30/48/50/60fps and 4K: 3840×2160@24/25/30/48/50/60/100/120fpsISO Range: 100-12800Front Screen: 1.4-inch, 323ppi, 320×320Rear Screen: 2.25-inch, 326ppi, 360×640Front/Rear Screen Brightness: 750±50 cd/m² Storage: microSDBattery: 1770mAh, lab tested to offer up to 160 minutes of runtimeOperating Temperature: -20° to 45° CThis article was originally published in August of 2023 and updated in March 2025.Featured reviews #one #most #versatile #action #cameras
    WWW.ZDNET.COM
    One of the most versatile action cameras I've tested isn't from GoPro - and it's on sale
    DJI Osmo Action 4. Adrian Kingsley-Hughes/ZDNETMultiple DJI Osmo Action 4 packages are on sale at Amazon. Both the Essential and Standard Combos have been discounted to $249, while the Adventure Combo has dropped to $349.DJI might not be the first name on people's lips when it comes to action cameras, but the company that's better known for its drones also has a really solid line of action cameras. And its latest device, the Osmo Action 4 camera, has some very impressive tricks up its sleeve.Also: One of the most versatile cameras I've used is not from Sony or Canon and it's on saleSo, what sets this action camera apart from the competition? Let's take a look. details View at Amazon First off, this is not just an action camera -- it's a pro-grade action camera.From a hardware point of view, the Osmo Action 4 features a 1/1.3-inch image sensor that can record 4K at up to 120 frames per second (fps). This sensor is combined with a wide-angle f/2.8 aperture lens that provides an ultra-wide field of view of up to 155°. And that's wide. Build quality and fit and finish are second to none. Adrian Kingsley-Hughes/ZDNETFor when the going gets rough, the Osmo Action 4 offers 360° HorizonSteady stabilization modes, including RockSteady 3.0/3.0+ for first-person video footage and HorizonBalancing/HorizonSteady modes for horizontal shots. That's pro-grade hardware right there.Also: This new AI video editor is an all-in-one production service for filmmakers - how to try itThe Osmo Action 4 also features a 10-bit D-Log M color mode. This mode allows the sensor to record over one billion colors and offers a wider dynamic range, giving you a video that is more vivid and that offers greater detail in the highlights and shadows. This mode, combined with an advanced color temperature sensor, means that the colors have a true-to-life feel regardless of whether you're shooting outdoors, indoors, or even underwater. The DJI Osmo Action 4 ready for action. Adrian Kingsley-Hughes/ZDNETI've added some video output from the Osmo Action 4 below. There are examples in both 1080p and 4K. To test the stabilization, I attached the camera to the truck and took it on some roads, some of which are pretty rough. The Osmo Action 4 had no problem with that terrain. I also popped the camera into the sea, just because. And again, no problem.I've also captured a few time-lapses with the camera -- not because I like clouds (well, actually, I do like clouds), but pointing a camera at a sky can be a good test of how it handles changing light. Also: I recommend this action camera to beginners and professional creators. Here's whyTimelapses with action cameras can suffer from unsightly exposure changes that cause the image to pulse, a condition known as exposure pumping. This issue can also cause the white balance to change noticeably in a video, but the Osmo Action 4 handled this test well.All the footage I've shot is what I've come to expect from a DJI camera, whether it's from an action camera or drone -- crisp, clear, vivid, and also nice and stable.The Osmo Action 4 is packed with various electronic image-stabilization (EIS) tech to ensure that your footage is smooth and on the horizon. It's worth noting the limitations of EIS -- it's not supported in slow-motion and timelapse modes, and the HorizonSteady and HorizonBalancing features are only available for video recorded at 1080p (16:9) or 2.7K (16:9) with a frame rate of 60fps or below. On the durability front, I've no concerns. I've subjected the Osmo Action 4 to a hard few days of testing, and it's not let me down or complained once. It takes impacts like a champ, and being underwater or in dirt and sand is no problem at all. Also: I'm a full-time Canon photographer, but this Nikon camera made me wonder if I'm missing outYou might think that this heavy-duty testing would be hard on the camera's tiny batteries, but you'd be wrong. Remember I said the Osmo Action 4 offered hours of battery life? Well, I wasn't kidding.  The Osmo Action 4's ultra-long life batteries are incredible.  Adrian Kingsley-Hughes/ZDNETDJI says that a single battery can deliver up to 160 minutes of 1080p/24fps video recording (at room temperature, with RockSteady on, Wi-Fi off, and screen off). That's over two and a half hours of recording time. In the real world, I was blown away by how much a single battery can deliver. I shot video and timelapse, messed around with a load of camera settings, and then transferred that footage to my iPhone, and still had 16% battery left.No action camera has delivered so much for me on one battery. The two extra batteries and the multifunction case that come as part of the Adventure Combo are worth the extra $100. Adrian Kingsley-Hughes/ZDNETAnd when you're ready to recharge, a 30W USB-C charger can take a battery from zero to 80% in 18 minutes. That's also impressive.What's more, the batteries are resistant to cold, offering up to 150 minutes of 1080p/24fps recording in temperatures as low as -20°C (-4°F). This resistance also blows the competition away.Even taking into account all these strong points, the Osmo Action 4 offers even more.The camera has 2x digital zoom for better composition, Voice Prompts that let you know what the camera is doing without looking, and Voice Control that lets you operate the device without touching the screen or using the app. The Osmo Action 4 also digitally hides the selfie stick from a variety of different shots, and you can even connect the DJI Mic to the camera via the USB-C port for better audio capture.Also: Yes, an Android tablet finally made me reconsider my iPad Pro loyaltyAs for price, the Osmo Action 4 Standard Combo bundle comes in at $399, while the Osmo Action 4 Adventure Combo, which comes with two extra Osmo Action Extreme batteries, an additional mini Osmo Action quick-release adapter mount, a battery case that acts as a power bank, and a 1.5-meter selfie stick, is $499.I'm in love with the Osmo Action 4. It's hands down the best, most versatile, most powerful action camera on the market today, offering pro-grade features at a price that definitely isn't pro-grade.  Everything included in the Action Combo bundle. DJIDJI Osmo Action 4 tech specsDimensions: 70.5×44.2×32.8mmWeight: 145gWaterproof: 18m, up to 60m with the optional waterproof case Microphones: 3Sensor 1/1.3-inch CMOSLens: FOV 155°, aperture f/2.8, focus distance 0.4m to ∞Max Photo Resolution: 3648×2736Max Video Resolution: 4K (4:3): 3840×2880@24/25/30/48/50/60fps and 4K (16:9): 3840×2160@24/25/30/48/50/60/100/120fpsISO Range: 100-12800Front Screen: 1.4-inch, 323ppi, 320×320Rear Screen: 2.25-inch, 326ppi, 360×640Front/Rear Screen Brightness: 750±50 cd/m² Storage: microSD (up to 512GB)Battery: 1770mAh, lab tested to offer up to 160 minutes of runtime (tested at room temperature - 25°C/77°F - and 1080p/24fps, with RockSteady on, Wi-Fi off, and screen off)Operating Temperature: -20° to 45° C (-4° to 113° F)This article was originally published in August of 2023 and updated in March 2025.Featured reviews
    0 Σχόλια 0 Μοιράστηκε
  • Unironically the Best Case: Retro Silverstone FLP02 with Turbo Button

    Cases News Unironically the Best Case: Retro Silverstone FLP02 with Turbo ButtonJune 6, 2025Last Updated: 2025-06-06Silverstone made the best case of Computex 2025 -- and it's actually shippingThe HighlightsThe FLP02 case is Silverstone's latest in its now growing lineup of retro-themed computer casesThe FLP02 will be sold for around if all things go as planned, or just under 200 EURIt includes modern features, like 360mm radiator support, but also mixes in old throwbacksTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Silverstone’s booth at Computex 2025 and walked away thinking we saw the best case of the show.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeEditing, CameraMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangSilverstone FLP02Our favorite case happens to be Silverstone’s retro-inspired, beige FLP02. Its old theme may look like an April Fool’s joke, but it’s definitely going into mass production. The case evokes the look of computers along the 286 through 486 era along with some of the early Pentium PCs. The case has a red power switch on the front along with a reset button, which actually follows the front lock. The turbo button, on the other hand, adjusts the fan speed. The number display indicates how fast the fans are going.The FLP02 case is based on existing tooling. Internally, the case is set up pretty normal in some ways. The power supply shroud is present and on the bottom, and it’s punctured on the top for airflow. Back in the olden days, the PSU would be in the top. The FLP02 also has 5.25 hard drive cage support.The switches on the front of the case, which represent floppy drives, are actually functional. Releasing the lock allows the slot cover to come out. Silverstone tells us the mechanism here that we saw at Computex is actually very difficult to manufacture so the company will probably create a stronger and more resilient mechanism with the company showing us a 3D printed mock-up of one.  Internally, the back of the case has a 120mm fan, but it can fit a 140mm one. The top of the FLP02 can fit a 360mm radiator. The case also has a vertical GPU mount option, though it’s only for a 2-slot wide mount, which restricts what kind of card you can put in it. The FLP02 also has a vertical GPU support, which is obviously a more modern feature.   For inspiration, Silverstone told us it Googled old computers and chose bits and pieces that it liked for the case’s design.  Older computer cases wouldn’t have had a lot of ventilation on the front, but the FLP02 has some ventilation on the front bottom. Its top panel is also ventilated and has a dust filter. The top of the case also has options for multiple radiator sizes.   The back side of the case has all of the modern cable management options so it ends up being a mix of design from both old and new. In terms of pricing, Silverstone says it will probably be but that’s based on the current tariff situation. In the European market, the company is looking at around or less than 200 Euros. The case is also hiding some more modern features, like the front-panel USB ports, under covers to keep the immersion that the case is old. We plan on reviewing the case when it comes out. Silverstone LD05 Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!Switching gears, Silverstone’s LD05 is a more modern fish-tank style ATX case that’s trying to hit a price point, which is, again, dependent on the tariff situation. The company plans on providing 3x120mm ARGB fans. In terms of fan-mount locations, there are 2 on the side and a fan on the back. And there’s also space on the top for either 120mm or 140mm fans. The build we saw had 3x120mm ones.The case has a heavily ventilated power supply shroud, which also has a hard-drive cage within it, which is also perforated. Speaking of perforations, the back side panel is also perforated. The backside has some cable management space. It’s pretty standard. The LD05 also has white cables that try to match the case itself. The color isn’t an exact match, however.  Silverstone Alta T1The Alta T1 is a case we saw at last year’s Computex and Silverstone tells us it will be over a grand. Silverstone Alta T2We saw a version of the T2 case last year. In terms of pricing, the T2 will be about It has an aluminum shell. When we pulled off its bottom side panel at Computex, it revealed 1 of 2 installed power supplies in the system we looked at. The other PSU is right behind it. The shroud area also has drive mounts in the middle and the front. The case itself has a ton of drive cage options. The T2 essentially acts like a home-server rendering farm of sorts. It’s got 11 slots for PCIe devices, making it one of the larger cases on the market for PCIe support.  The case’s rail system allows you to basically mount whatever you want wherever you want.The top front of the case has a canted angle, which has a plate that pulls off. There’s also another plate on the front bottom that pulls off and reveals the interior of the case. The T2 we saw also had 180mm fans installed in it. Silverstone Home Server Interview Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.We also interviewed Tony from Silverstone, where he walked us through some of the company’s home-server style cases. Make sure you check out that interview in our video.
    #unironically #best #case #retro #silverstone
    Unironically the Best Case: Retro Silverstone FLP02 with Turbo Button
    Cases News Unironically the Best Case: Retro Silverstone FLP02 with Turbo ButtonJune 6, 2025Last Updated: 2025-06-06Silverstone made the best case of Computex 2025 -- and it's actually shippingThe HighlightsThe FLP02 case is Silverstone's latest in its now growing lineup of retro-themed computer casesThe FLP02 will be sold for around if all things go as planned, or just under 200 EURIt includes modern features, like 360mm radiator support, but also mixes in old throwbacksTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Silverstone’s booth at Computex 2025 and walked away thinking we saw the best case of the show.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeEditing, CameraMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangSilverstone FLP02Our favorite case happens to be Silverstone’s retro-inspired, beige FLP02. Its old theme may look like an April Fool’s joke, but it’s definitely going into mass production. The case evokes the look of computers along the 286 through 486 era along with some of the early Pentium PCs. The case has a red power switch on the front along with a reset button, which actually follows the front lock. The turbo button, on the other hand, adjusts the fan speed. The number display indicates how fast the fans are going.The FLP02 case is based on existing tooling. Internally, the case is set up pretty normal in some ways. The power supply shroud is present and on the bottom, and it’s punctured on the top for airflow. Back in the olden days, the PSU would be in the top. The FLP02 also has 5.25 hard drive cage support.The switches on the front of the case, which represent floppy drives, are actually functional. Releasing the lock allows the slot cover to come out. Silverstone tells us the mechanism here that we saw at Computex is actually very difficult to manufacture so the company will probably create a stronger and more resilient mechanism with the company showing us a 3D printed mock-up of one.  Internally, the back of the case has a 120mm fan, but it can fit a 140mm one. The top of the FLP02 can fit a 360mm radiator. The case also has a vertical GPU mount option, though it’s only for a 2-slot wide mount, which restricts what kind of card you can put in it. The FLP02 also has a vertical GPU support, which is obviously a more modern feature.   For inspiration, Silverstone told us it Googled old computers and chose bits and pieces that it liked for the case’s design.  Older computer cases wouldn’t have had a lot of ventilation on the front, but the FLP02 has some ventilation on the front bottom. Its top panel is also ventilated and has a dust filter. The top of the case also has options for multiple radiator sizes.   The back side of the case has all of the modern cable management options so it ends up being a mix of design from both old and new. In terms of pricing, Silverstone says it will probably be but that’s based on the current tariff situation. In the European market, the company is looking at around or less than 200 Euros. The case is also hiding some more modern features, like the front-panel USB ports, under covers to keep the immersion that the case is old. We plan on reviewing the case when it comes out. Silverstone LD05 Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!Switching gears, Silverstone’s LD05 is a more modern fish-tank style ATX case that’s trying to hit a price point, which is, again, dependent on the tariff situation. The company plans on providing 3x120mm ARGB fans. In terms of fan-mount locations, there are 2 on the side and a fan on the back. And there’s also space on the top for either 120mm or 140mm fans. The build we saw had 3x120mm ones.The case has a heavily ventilated power supply shroud, which also has a hard-drive cage within it, which is also perforated. Speaking of perforations, the back side panel is also perforated. The backside has some cable management space. It’s pretty standard. The LD05 also has white cables that try to match the case itself. The color isn’t an exact match, however.  Silverstone Alta T1The Alta T1 is a case we saw at last year’s Computex and Silverstone tells us it will be over a grand. Silverstone Alta T2We saw a version of the T2 case last year. In terms of pricing, the T2 will be about It has an aluminum shell. When we pulled off its bottom side panel at Computex, it revealed 1 of 2 installed power supplies in the system we looked at. The other PSU is right behind it. The shroud area also has drive mounts in the middle and the front. The case itself has a ton of drive cage options. The T2 essentially acts like a home-server rendering farm of sorts. It’s got 11 slots for PCIe devices, making it one of the larger cases on the market for PCIe support.  The case’s rail system allows you to basically mount whatever you want wherever you want.The top front of the case has a canted angle, which has a plate that pulls off. There’s also another plate on the front bottom that pulls off and reveals the interior of the case. The T2 we saw also had 180mm fans installed in it. Silverstone Home Server Interview Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.We also interviewed Tony from Silverstone, where he walked us through some of the company’s home-server style cases. Make sure you check out that interview in our video. #unironically #best #case #retro #silverstone
    GAMERSNEXUS.NET
    Unironically the Best Case: Retro Silverstone FLP02 with Turbo Button
    Cases News Unironically the Best Case: Retro Silverstone FLP02 with Turbo ButtonJune 6, 2025Last Updated: 2025-06-06Silverstone made the best case of Computex 2025 -- and it's actually shippingThe HighlightsThe FLP02 case is Silverstone's latest in its now growing lineup of retro-themed computer casesThe FLP02 will be sold for around $220, if all things go as planned, or just under 200 EURIt includes modern features, like 360mm radiator support, but also mixes in old throwbacksTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Silverstone’s booth at Computex 2025 and walked away thinking we saw the best case of the show.Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeEditing, CameraMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangSilverstone FLP02Our favorite case happens to be Silverstone’s retro-inspired, beige FLP02. Its old theme may look like an April Fool’s joke, but it’s definitely going into mass production. The case evokes the look of computers along the 286 through 486 era along with some of the early Pentium PCs. The case has a red power switch on the front along with a reset button, which actually follows the front lock. The turbo button, on the other hand, adjusts the fan speed. The number display indicates how fast the fans are going.The FLP02 case is based on existing tooling. Internally, the case is set up pretty normal in some ways. The power supply shroud is present and on the bottom, and it’s punctured on the top for airflow. Back in the olden days, the PSU would be in the top. The FLP02 also has 5.25 hard drive cage support.The switches on the front of the case, which represent floppy drives, are actually functional. Releasing the lock allows the slot cover to come out. Silverstone tells us the mechanism here that we saw at Computex is actually very difficult to manufacture so the company will probably create a stronger and more resilient mechanism with the company showing us a 3D printed mock-up of one.  Internally, the back of the case has a 120mm fan, but it can fit a 140mm one. The top of the FLP02 can fit a 360mm radiator. The case also has a vertical GPU mount option, though it’s only for a 2-slot wide mount, which restricts what kind of card you can put in it. The FLP02 also has a vertical GPU support, which is obviously a more modern feature.   For inspiration, Silverstone told us it Googled old computers and chose bits and pieces that it liked for the case’s design.  Older computer cases wouldn’t have had a lot of ventilation on the front, but the FLP02 has some ventilation on the front bottom. Its top panel is also ventilated and has a dust filter. The top of the case also has options for multiple radiator sizes.   The back side of the case has all of the modern cable management options so it ends up being a mix of design from both old and new. In terms of pricing, Silverstone says it will probably be $220, but that’s based on the current tariff situation. In the European market, the company is looking at around or less than 200 Euros. The case is also hiding some more modern features, like the front-panel USB ports, under covers to keep the immersion that the case is old. We plan on reviewing the case when it comes out. Silverstone LD05 Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a direct donation or a Patreon contribution!)Switching gears, Silverstone’s LD05 is a more modern fish-tank style ATX case that’s trying to hit a $100 price point, which is, again, dependent on the tariff situation. The company plans on providing 3x120mm ARGB fans. In terms of fan-mount locations, there are 2 on the side and a fan on the back. And there’s also space on the top for either 120mm or 140mm fans. The build we saw had 3x120mm ones.The case has a heavily ventilated power supply shroud, which also has a hard-drive cage within it, which is also perforated. Speaking of perforations, the back side panel is also perforated. The backside has some cable management space. It’s pretty standard. The LD05 also has white cables that try to match the case itself. The color isn’t an exact match, however.  Silverstone Alta T1The Alta T1 is a case we saw at last year’s Computex and Silverstone tells us it will be over a grand. Silverstone Alta T2We saw a version of the T2 case last year. In terms of pricing, the T2 will be about $1,000. It has an aluminum shell. When we pulled off its bottom side panel at Computex, it revealed 1 of 2 installed power supplies in the system we looked at. The other PSU is right behind it. The shroud area also has drive mounts in the middle and the front. The case itself has a ton of drive cage options. The T2 essentially acts like a home-server rendering farm of sorts. It’s got 11 slots for PCIe devices, making it one of the larger cases on the market for PCIe support.  The case’s rail system allows you to basically mount whatever you want wherever you want.The top front of the case has a canted angle, which has a plate that pulls off. There’s also another plate on the front bottom that pulls off and reveals the interior of the case. The T2 we saw also had 180mm fans installed in it. Silverstone Home Server Interview Visit our Patreon page to contribute a few dollars toward this website's operation (or consider a direct donation or buying something from our GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.We also interviewed Tony from Silverstone, where he walked us through some of the company’s home-server style cases. Make sure you check out that interview in our video.
    Like
    Love
    Wow
    Sad
    Angry
    762
    4 Σχόλια 0 Μοιράστηκε
  • In conflict: Putting Russia’s datacentre market under the microscope

    When Russian troops invaded Ukraine on 24 February 2022, Russia’s datacentre sector was one of the fastest-growing segments of the country’s IT industry, with annual growth rates in the region of 10-12%.
    However, with the conflict resulting in the imposition of Western sanctions against Russia and an outflow of US-based tech companies from the country, including Apple and Microsoft, optimism about the sector’s potential for further growth soon disappeared.
    In early March 2025, it was reported that Google had disconnected from traffic exchange points and datacentres in Russia, leading to concerns about how this could negatively affect the speed of access to some Google services for Russian users.
    Initially, there was hope that domestic technology and datacentre providers might be able to plug the gaps left by the exodus of the US tech giants, but it seems they could not keep up with the hosting demands of Russia’s increasingly digital economy.
    Oleg Kim, director of the hardware systems department at Russian IT company Axoft, says the departure of foreign cloud providers and equipment manufacturers has led to a serious shortage of compute capacity in Russia.
    This is because the situation resulted in a sharp, initial increase in demand for domestic datacentres, but Russian providers simply did not have time to expand their capacities on the required scale, continues Kim.

    According to the estimates of Key Point, one of Russia’s largest datacentre networks, meeting Russia’s demand for datacentres will require facilities with a total capacity of 30,000 racks to be built each year over the next five years.
    On top of this, it has also become more costly to build datacentres in Russia.
    Estimates suggest that prior to 2022, the cost of a datacentre rack totalled 100,000 rubles, but now exceeds 150,000 rubles.
    And analysts at Forbes Russia expect these figures will continue to grow, due to rising logistics costs and the impact the war is having on the availability of skilled labour in the construction sector.
    The impact of these challenges is being keenly felt by users, with several of the country’s large banks experiencing serious problems when finding suitable locations for their datacentres.
    Sberbank is among the firms affected, with its chairperson, German Gref, speaking out previously about how the bank is in need of a datacentre with at least 200MW of capacity, but would ideally need 300-400MW to address its compute requirements.
    Stanislav Bliznyuk, chairperson of T-Bank, says trying to build even two 50MW datacentres to meet its needs is proving problematic. “Finding locations where such capacity and adequate tariffs are available is a difficult task,” he said.

    about datacentre developments

    North Lincolnshire Council has received a planning permission application for another large-scale datacentre development, in support of its bid to become an AI Growth Zone
    A proposal to build one of the biggest datacentres in Europe has been submitted to Hertsmere Borough Council, and already has the support of the technology secretary and local councillors.
    The UK government has unveiled its 50-point AI action plan, which commits to building sovereign artificial intelligence capabilities and accelerating AI datacentre developments – but questions remain about the viability of the plans.

    Despite this, T-Bank is establishing its own network of data processing centres – the first of which should open in early 2027, he confirmed in November 2024.
    Kirill Solyev, head of the engineering infrastructure department of the Softline Group of Companies, who specialise in IT, says many large Russian companies are resorting to building their own datacentres – because compute capacity is in such short supply.
    The situation is, however, complicated by the lack of suitable locations for datacentres in the largest cities of Russia – Moscow and St Petersburg. “For example, to build a datacentre with a capacity of 60MW, finding a suitable site can take up to three years,” says Solyev. “In Moscow, according to preliminary estimates, there are about 50MW of free capacity left, which is equivalent to 2-4 large commercial datacentres.
    “The capacity deficit only in the southern part of the Moscow region is predicted at 564MW by 2030, and up to 3.15GW by 2042.”
    As a result, datacentre operators and investors are now looking for suitable locations outside of Moscow and St Petersburg, and seeking to co-locate new datacentres in close proximity to renewable energy sources.
    And this will be important as demand for datacentre capacity in Russia is expected to increase, as it is in most of the rest of the world, due to the growing use of artificial intelligencetools and services.
    The energy-intensive nature of AI workloads will put further pressure on operators that are already struggling to meet the compute capacity demands of their customers.

    Speaking at the recent Ural Forum on cyber security in finance, Alexander Kraynov, director of AI technology development at Yandex, says solving the energy consumption issue of AI datacentres will not be easy.
    “The world is running out of electricity, including for AI, while the same situation is observed in Russia,” he said. “In order to ensure a stable energy supply of a newly built large datacentre, we will need up to one year.”
    According to a recent report of the Russian Vedomosti business paper, as of April 2024, Russian datacentres have used about 2.6GW, which is equivalent to about 1% of the installed capacity of the Unified Energy System of Russia.
    Accommodating AI workloads will also mean operators will need to purchase additional equipment, including expensive accelerators based on graphic processing units and higher-performing data storage systems.
    The implementation of these plans and the viability of these purchases is likely to be seriously complicated by the current sanctions regime against Russia.
    That said, Russia’s prime minister, Mikhail Mishustin, claims this part of the datacentre supply equation is being partially solved by an uptick in the domestic production of datacentre kit.
    According to the Mishustin, more than half of the server equipment and industrial storage and information processing systems needed for datacentres are already being produced in Russia – and these figures will continue to grow.

    The government also plans to provide additional financial support to the industry, as – to date – building datacentres in Russia has been prevented by relatively long payback periods, of up to 10 years in some cases, of such projects.
    One of the possible support measures on offer could include the subsidisation of at least part of the interest rates on loans to datacentre developers and operators.
    At the same time, though, the government’s actions in other areas have made it harder for operators to build new facilities.
    For example, in March 2025, the Russian government significantly tightened the existing norms for the establishment of new datacentres in the form of new rules for the design of data processing centres, which came into force after the approval by the Russian Ministry of Construction.
    According to Nikita Tsaplin, CEO of Russian hosting provider RUVDS, the rules led to additional bureaucracy in the sector.
    And, according to his predictions, that situation can extend the construction cycle of a datacentre from around five years to seven years.
    The government’s intervention here was to prevent the installation of servers in residential areas, such as garages, but it looks set to complicate an already complex situation – prompting questions about whether Russia’s datacentre market will ever reach its full potential.
    #conflict #putting #russias #datacentre #market
    In conflict: Putting Russia’s datacentre market under the microscope
    When Russian troops invaded Ukraine on 24 February 2022, Russia’s datacentre sector was one of the fastest-growing segments of the country’s IT industry, with annual growth rates in the region of 10-12%. However, with the conflict resulting in the imposition of Western sanctions against Russia and an outflow of US-based tech companies from the country, including Apple and Microsoft, optimism about the sector’s potential for further growth soon disappeared. In early March 2025, it was reported that Google had disconnected from traffic exchange points and datacentres in Russia, leading to concerns about how this could negatively affect the speed of access to some Google services for Russian users. Initially, there was hope that domestic technology and datacentre providers might be able to plug the gaps left by the exodus of the US tech giants, but it seems they could not keep up with the hosting demands of Russia’s increasingly digital economy. Oleg Kim, director of the hardware systems department at Russian IT company Axoft, says the departure of foreign cloud providers and equipment manufacturers has led to a serious shortage of compute capacity in Russia. This is because the situation resulted in a sharp, initial increase in demand for domestic datacentres, but Russian providers simply did not have time to expand their capacities on the required scale, continues Kim. According to the estimates of Key Point, one of Russia’s largest datacentre networks, meeting Russia’s demand for datacentres will require facilities with a total capacity of 30,000 racks to be built each year over the next five years. On top of this, it has also become more costly to build datacentres in Russia. Estimates suggest that prior to 2022, the cost of a datacentre rack totalled 100,000 rubles, but now exceeds 150,000 rubles. And analysts at Forbes Russia expect these figures will continue to grow, due to rising logistics costs and the impact the war is having on the availability of skilled labour in the construction sector. The impact of these challenges is being keenly felt by users, with several of the country’s large banks experiencing serious problems when finding suitable locations for their datacentres. Sberbank is among the firms affected, with its chairperson, German Gref, speaking out previously about how the bank is in need of a datacentre with at least 200MW of capacity, but would ideally need 300-400MW to address its compute requirements. Stanislav Bliznyuk, chairperson of T-Bank, says trying to build even two 50MW datacentres to meet its needs is proving problematic. “Finding locations where such capacity and adequate tariffs are available is a difficult task,” he said. about datacentre developments North Lincolnshire Council has received a planning permission application for another large-scale datacentre development, in support of its bid to become an AI Growth Zone A proposal to build one of the biggest datacentres in Europe has been submitted to Hertsmere Borough Council, and already has the support of the technology secretary and local councillors. The UK government has unveiled its 50-point AI action plan, which commits to building sovereign artificial intelligence capabilities and accelerating AI datacentre developments – but questions remain about the viability of the plans. Despite this, T-Bank is establishing its own network of data processing centres – the first of which should open in early 2027, he confirmed in November 2024. Kirill Solyev, head of the engineering infrastructure department of the Softline Group of Companies, who specialise in IT, says many large Russian companies are resorting to building their own datacentres – because compute capacity is in such short supply. The situation is, however, complicated by the lack of suitable locations for datacentres in the largest cities of Russia – Moscow and St Petersburg. “For example, to build a datacentre with a capacity of 60MW, finding a suitable site can take up to three years,” says Solyev. “In Moscow, according to preliminary estimates, there are about 50MW of free capacity left, which is equivalent to 2-4 large commercial datacentres. “The capacity deficit only in the southern part of the Moscow region is predicted at 564MW by 2030, and up to 3.15GW by 2042.” As a result, datacentre operators and investors are now looking for suitable locations outside of Moscow and St Petersburg, and seeking to co-locate new datacentres in close proximity to renewable energy sources. And this will be important as demand for datacentre capacity in Russia is expected to increase, as it is in most of the rest of the world, due to the growing use of artificial intelligencetools and services. The energy-intensive nature of AI workloads will put further pressure on operators that are already struggling to meet the compute capacity demands of their customers. Speaking at the recent Ural Forum on cyber security in finance, Alexander Kraynov, director of AI technology development at Yandex, says solving the energy consumption issue of AI datacentres will not be easy. “The world is running out of electricity, including for AI, while the same situation is observed in Russia,” he said. “In order to ensure a stable energy supply of a newly built large datacentre, we will need up to one year.” According to a recent report of the Russian Vedomosti business paper, as of April 2024, Russian datacentres have used about 2.6GW, which is equivalent to about 1% of the installed capacity of the Unified Energy System of Russia. Accommodating AI workloads will also mean operators will need to purchase additional equipment, including expensive accelerators based on graphic processing units and higher-performing data storage systems. The implementation of these plans and the viability of these purchases is likely to be seriously complicated by the current sanctions regime against Russia. That said, Russia’s prime minister, Mikhail Mishustin, claims this part of the datacentre supply equation is being partially solved by an uptick in the domestic production of datacentre kit. According to the Mishustin, more than half of the server equipment and industrial storage and information processing systems needed for datacentres are already being produced in Russia – and these figures will continue to grow. The government also plans to provide additional financial support to the industry, as – to date – building datacentres in Russia has been prevented by relatively long payback periods, of up to 10 years in some cases, of such projects. One of the possible support measures on offer could include the subsidisation of at least part of the interest rates on loans to datacentre developers and operators. At the same time, though, the government’s actions in other areas have made it harder for operators to build new facilities. For example, in March 2025, the Russian government significantly tightened the existing norms for the establishment of new datacentres in the form of new rules for the design of data processing centres, which came into force after the approval by the Russian Ministry of Construction. According to Nikita Tsaplin, CEO of Russian hosting provider RUVDS, the rules led to additional bureaucracy in the sector. And, according to his predictions, that situation can extend the construction cycle of a datacentre from around five years to seven years. The government’s intervention here was to prevent the installation of servers in residential areas, such as garages, but it looks set to complicate an already complex situation – prompting questions about whether Russia’s datacentre market will ever reach its full potential. #conflict #putting #russias #datacentre #market
    WWW.COMPUTERWEEKLY.COM
    In conflict: Putting Russia’s datacentre market under the microscope
    When Russian troops invaded Ukraine on 24 February 2022, Russia’s datacentre sector was one of the fastest-growing segments of the country’s IT industry, with annual growth rates in the region of 10-12%. However, with the conflict resulting in the imposition of Western sanctions against Russia and an outflow of US-based tech companies from the country, including Apple and Microsoft, optimism about the sector’s potential for further growth soon disappeared. In early March 2025, it was reported that Google had disconnected from traffic exchange points and datacentres in Russia, leading to concerns about how this could negatively affect the speed of access to some Google services for Russian users. Initially, there was hope that domestic technology and datacentre providers might be able to plug the gaps left by the exodus of the US tech giants, but it seems they could not keep up with the hosting demands of Russia’s increasingly digital economy. Oleg Kim, director of the hardware systems department at Russian IT company Axoft, says the departure of foreign cloud providers and equipment manufacturers has led to a serious shortage of compute capacity in Russia. This is because the situation resulted in a sharp, initial increase in demand for domestic datacentres, but Russian providers simply did not have time to expand their capacities on the required scale, continues Kim. According to the estimates of Key Point, one of Russia’s largest datacentre networks, meeting Russia’s demand for datacentres will require facilities with a total capacity of 30,000 racks to be built each year over the next five years. On top of this, it has also become more costly to build datacentres in Russia. Estimates suggest that prior to 2022, the cost of a datacentre rack totalled 100,000 rubles ($1,200), but now exceeds 150,000 rubles. And analysts at Forbes Russia expect these figures will continue to grow, due to rising logistics costs and the impact the war is having on the availability of skilled labour in the construction sector. The impact of these challenges is being keenly felt by users, with several of the country’s large banks experiencing serious problems when finding suitable locations for their datacentres. Sberbank is among the firms affected, with its chairperson, German Gref, speaking out previously about how the bank is in need of a datacentre with at least 200MW of capacity, but would ideally need 300-400MW to address its compute requirements. Stanislav Bliznyuk, chairperson of T-Bank, says trying to build even two 50MW datacentres to meet its needs is proving problematic. “Finding locations where such capacity and adequate tariffs are available is a difficult task,” he said. Read more about datacentre developments North Lincolnshire Council has received a planning permission application for another large-scale datacentre development, in support of its bid to become an AI Growth Zone A proposal to build one of the biggest datacentres in Europe has been submitted to Hertsmere Borough Council, and already has the support of the technology secretary and local councillors. The UK government has unveiled its 50-point AI action plan, which commits to building sovereign artificial intelligence capabilities and accelerating AI datacentre developments – but questions remain about the viability of the plans. Despite this, T-Bank is establishing its own network of data processing centres – the first of which should open in early 2027, he confirmed in November 2024. Kirill Solyev, head of the engineering infrastructure department of the Softline Group of Companies, who specialise in IT, says many large Russian companies are resorting to building their own datacentres – because compute capacity is in such short supply. The situation is, however, complicated by the lack of suitable locations for datacentres in the largest cities of Russia – Moscow and St Petersburg. “For example, to build a datacentre with a capacity of 60MW, finding a suitable site can take up to three years,” says Solyev. “In Moscow, according to preliminary estimates, there are about 50MW of free capacity left, which is equivalent to 2-4 large commercial datacentres. “The capacity deficit only in the southern part of the Moscow region is predicted at 564MW by 2030, and up to 3.15GW by 2042.” As a result, datacentre operators and investors are now looking for suitable locations outside of Moscow and St Petersburg, and seeking to co-locate new datacentres in close proximity to renewable energy sources. And this will be important as demand for datacentre capacity in Russia is expected to increase, as it is in most of the rest of the world, due to the growing use of artificial intelligence (AI) tools and services. The energy-intensive nature of AI workloads will put further pressure on operators that are already struggling to meet the compute capacity demands of their customers. Speaking at the recent Ural Forum on cyber security in finance, Alexander Kraynov, director of AI technology development at Yandex, says solving the energy consumption issue of AI datacentres will not be easy. “The world is running out of electricity, including for AI, while the same situation is observed in Russia,” he said. “In order to ensure a stable energy supply of a newly built large datacentre, we will need up to one year.” According to a recent report of the Russian Vedomosti business paper, as of April 2024, Russian datacentres have used about 2.6GW, which is equivalent to about 1% of the installed capacity of the Unified Energy System of Russia. Accommodating AI workloads will also mean operators will need to purchase additional equipment, including expensive accelerators based on graphic processing units and higher-performing data storage systems. The implementation of these plans and the viability of these purchases is likely to be seriously complicated by the current sanctions regime against Russia. That said, Russia’s prime minister, Mikhail Mishustin, claims this part of the datacentre supply equation is being partially solved by an uptick in the domestic production of datacentre kit. According to the Mishustin, more than half of the server equipment and industrial storage and information processing systems needed for datacentres are already being produced in Russia – and these figures will continue to grow. The government also plans to provide additional financial support to the industry, as – to date – building datacentres in Russia has been prevented by relatively long payback periods, of up to 10 years in some cases, of such projects. One of the possible support measures on offer could include the subsidisation of at least part of the interest rates on loans to datacentre developers and operators. At the same time, though, the government’s actions in other areas have made it harder for operators to build new facilities. For example, in March 2025, the Russian government significantly tightened the existing norms for the establishment of new datacentres in the form of new rules for the design of data processing centres, which came into force after the approval by the Russian Ministry of Construction. According to Nikita Tsaplin, CEO of Russian hosting provider RUVDS, the rules led to additional bureaucracy in the sector (due to the positioning of datacentres as typical construction objects). And, according to his predictions, that situation can extend the construction cycle of a datacentre from around five years to seven years. The government’s intervention here was to prevent the installation of servers in residential areas, such as garages, but it looks set to complicate an already complex situation – prompting questions about whether Russia’s datacentre market will ever reach its full potential.
    Like
    Love
    Wow
    Sad
    Angry
    631
    0 Σχόλια 0 Μοιράστηκε
  • Fractal Design Meshify 3

    Pros
    Excellent cooling performanceBrilliantly designed front fan bracketsBeautiful lighting effects in tested Ambience Pro RGB versionElaborate, web-accessible software controls for lighting, fans

    Cons
    Only minimal dust filtrationHigh price for our Ambience Pro test model

    Fractal Design Meshify 3 Specs

    120mm or 140mm Fan Positions
    6

    120mm to 200mm Fans Included
    3

    Dimensions20.1 by 9.1 by 17.2 inches

    Fan Controller Included?

    Front Panel Ports
    HD Audio

    Front Panel Ports
    USB 3.2 Gen 1 Type-AFront Panel Ports
    USB 3.2 Gen 2 Type-C

    Included Fan Lighting Color
    Addressable RGB

    Internal 2.5-Inch Bays
    6

    Internal 3.5-Inch Bays
    2

    Internal Chassis Lighting Color
    None

    Maximum CPU Cooler Height
    173

    Maximum GPU Length
    349

    Motherboard Form Factors Supported
    ATX

    Motherboard Form Factors Supported
    MicroATX

    Motherboard Form Factors Supported
    Mini-ITX

    PCI Expansion Slot Positions
    7

    Power Supply Form Factor Supported
    ATX

    Power Supply Maximum Length
    180

    Power Supply Mounting Location
    Bottom

    Side Window?
    YesWeight
    20.2

    All Specs

    Fractal Design boosts its latest Meshify PC case with a trio of 140mm ARGB fans behind its now-iconic “crumpled mesh” front face. Starting at a mid-market for its base model, the Meshify 3 also comes in upgraded versions with nifty extras that creep up the price. These include items like ARGB fan trim, ARGB side panel lighting, an ARGB strip surrounding the face panel, and even an ARGB controller that connects to the web. Taken together, all that can bump the price as high as the MSRP for the deluxe, spectacular Ambience Pro RGB version of the case we tested. Whatever the feature mix you opt for, the case’s robust cooling performance shines. At the high end of the range, though, factor in the case’s biggest shortfall—its lack of inlet-air dust filtration—given what competitors deliver in -plus cases. Our current ATX tower favorite, the NZXT H7 Flow, isn't much better equipped with filters and isn't as striking as the Ambience Pro case in all its lit glory, but it costs much less.Design: A Crumpled ClassicPC-case feature trends have changed a bit in the eight years that Fractal Design has been putting its signature crumpled-mesh faces on classic mid-tower cases.This latest version adds an air deflector at the front of the power supply shroud to force a bit more airflow past your hot graphics card. This Ambience Pro RGB variant’s feature set, as noted, has a USB-based ARGB controller, as well as lighting around the front face, along the bottom of the left side panel’s window, and on the three fans. Buyers willing to forgo most of the lit-up bling can get the basic “RGB” version with just the fan lighting for and those willing to give up even that helping of ARGB can get the base “TG” version for Our sample was in white; all three models are also available in black, and buyers who yearn for further simplification will find an additional “Solid” variant sold exclusively in black, with a painted steel panel on the left side in place of the window.Fractal Design has merged the headphone and microphone jacks of previous versions into a single four-pole connector on the Meshify 3. This connector functions as a normal headphone jack when one is plugged in; the extra pole serves the monaural microphone of a combined headset plug. Fractal also ditched the reset button of previous cases, but kept the twin USB 3 Type-A and a single Type-C port. And, this time around, the lighted power-on indicator ring that surrounds the power button is ARGB.Though the mesh that covers the face and top panel could potentially filter out some inbound dust, the only part of the Meshify 3 that’s explicitly designed as a dust trap is under the power supply’s air inlet. Sliding out from the case’s side, it’s partially disguised as a portion of the rear case foot.The Meshify 3’s back panel features a pattern of vent slots spaced to allow a fan to be screwed directly into the slots. Also back here are surface-mounted PCI Express expansion-card slots with replaceable covers, a plastic screw-tab cover with a built-in push tab at the bottom to ease its removal, and a removable power supply bracket that’s secured with two large knurled screws. Power supply insertion is through the case’s rear panel; the design lacks the space to slide in the power supply from the side.Both side panels are secured at the top with snaps, and Fractal Design added a pair of tabs to make that task a little easier. Those tabs also have screw holes, enabling you to further secure your side panels against accidental removal.A nylon pull tab at the center of the top panel’s back edge serves a similar function. To release that panel and lift it off, you must first slide it back a quarter inch or so.The front ARGB fans have 140mm frames, but there’s too little space behind them to mount a 420mm-format radiator vertically. That’s because radiator end caps tend to extend the total size by around 40mm.On the other hand, those really motivated to place a radiator behind the front panel’s fans will find that a 360mm-format unit will work, but only by removing the 140mm fans and flipping the fan-mount brackets over.Fractal Design’s brilliance shines through with these very basic sheet-metal brackets that flip to support either 120mm or 140mm fans without hindering airflow.The top panel is fully removable to ease radiator installation and removal, but it does not benefit from the front panel’s design wizardry. While its straight-edged brackets will cover a portion of the fan’s blades when fans are mounted directly on them, its 330mm-plus of length is sufficient to support every 280mm-format radiator we can think of.Also, notice the removable cable shroud running up and down the case near the front. It is adjustable to fit motherboards up to 10.9 inches deep. That is less than the 13-inch max depth of Extended ATX, but it’s still sufficient to fit the slightly oversized enthusiast-class motherboard models that sometimes still get called EATX.The lower front fan’s air deflector is removable and sits far enough above the case’s floor to be used in conjunction with a pair of 2.5-inch drive bays hidden beneath it.We removed the cable shroud for a clearer shot of this area. Keen observers might note the mounting slot for its lower edge at the top of the photo.Two drive trays, three push-in cable clips, and the ARGB controller are all found behind the motherboard tray. The card bracket’s removable covers and the removable power supply bracket are shown in the image below detached and in front of the case, and the photo also shows the gap beneath the removable front fan duct into which some builders may want to install a pair of 2.5-inch drives.Recommended by Our EditorsMore drive storage is visible here on the back of the motherboard tray. Configured from the factory to hold two 3.5-inch drives, these brackets on the back of the motherboard tray can be repositioned to hold four 2.5-inch drives instead.Held in place by a hook-and-loop Velcro-style strap, the included ARGB controller has USB and PWM input on the top, proprietary combination connectors on the side, and an old-fashioned SATA power connector on its bottom to power it up.Note that Fractal designed special outer shells on the proprietary ARGB/PWM combo connectors. This design is to prevent them from being mistakenly connected to anything USB Type-C, from which they appear to borrow their form. As with several others, this photo again shows the 10mm gap between the bottom panel’s 2.5-inch drive mounts and the underside of the front fan’s air guide.As for the controller box itself, here’s a shot of the connectors that we couldn’t see in the ARGB controller’s previous photos, including the SATA power inlet.Of the two output cables we did see, one is for the case's chain of fans, and the other is for this version of the case’s “Ambience Pro” lighting. Four telescoping contact pins allow the front panel’s portion to separate easily from the rest of that latter cable without an awkward tether.Building With the Fractal Design Meshify 3: Perfect Parts PacksFractal's accessory kits are hard to top in terms of neatness and clear labeling. Start with the screws: The Meshify 3 includes 24 M3 mounting screws, nine #6-32 screws to attach the motherboard to case standoffs, four #6-32 screws with hex/Phillips combo heads for power supply installation, and eight #6-32 shoulder screws for mounting 3.5-inch drives on damping grommets.You also get eight damping grommets, four cable ties, and an extra motherboard standoff.Our case being the Ambience Pro RGB version, it also includes a breakout cable that goes from the case’s proprietary ARGB/PWM connector to a standard ARGB strip and a standard PWM fan, along with an extension cable for the proprietary connector.Connecting the case to our motherboard are a power-button lead, an HD Audio header cable for the headset combo jack, a 19-pin USB 3.x for the Type-A ports, and a Gen 2x2 Type-E internal cable for the single Type-C external port. The case’s RGB controller also connects to one our motherboard’s USB 2.0 breakout headers and one of its PWM fan headers.The white version of the Meshify 3 includes chrome hardware, but since our standard Asus ATX test motherboard is black, I flexed my design chops and used black screws to attach it. I can also divulge that I initially forgot to reinstall the cable shroud, which required me later in the build to remove the graphics card, install the shroud, and reinstall the card. Oops!The RGB controller uses a web interface to select its various lighting and fan modes, rather than forcing users to install software, and it stores those settings on the controller rather than leaving components in the OS. You can dictate a "startup" lighting effect separately from the regular run of lighting that the case cycles through. Using it allowed us to switch from the case’s soft blue default to something a little more, shall we say, festive.The light controller’s “Sunset” mode looked like a softer variation of our CPU cooler’s Rainbow mode in this test. Nice.Testing the Fractal Design Meshify 3: Cool It, ManToday’s build leverages the ATX hardware from our most recent case evaluation platform, including its full-sized Cooler Master GX III Gold 850W power supply and mid-size Corsair iCue H100i RGB Pro XT CPU cooler.Apparently, that little scoop that pushes air upward from the lower of the three front fans does have some positive effect on overall case temperature. Our CPU, motherboard, and GPU numbers all show slightly lower temperatures than its five most closely-matched recently reviewed rivals.And just in case you thought that Fractal Design might have gotten its high score by overspeeding its fans a bit…it didn’t. Fan noise is tied for second place in this test group, behind the Super Flower Zillion Direct.The biggest nit we can pick is that some of the Meshify 3’s airflow enhancement might be due to its lack of flow-restricting dust filters.
    #fractal #design #meshify
    Fractal Design Meshify 3
    Pros Excellent cooling performanceBrilliantly designed front fan bracketsBeautiful lighting effects in tested Ambience Pro RGB versionElaborate, web-accessible software controls for lighting, fans Cons Only minimal dust filtrationHigh price for our Ambience Pro test model Fractal Design Meshify 3 Specs 120mm or 140mm Fan Positions 6 120mm to 200mm Fans Included 3 Dimensions20.1 by 9.1 by 17.2 inches Fan Controller Included? Front Panel Ports HD Audio Front Panel Ports USB 3.2 Gen 1 Type-AFront Panel Ports USB 3.2 Gen 2 Type-C Included Fan Lighting Color Addressable RGB Internal 2.5-Inch Bays 6 Internal 3.5-Inch Bays 2 Internal Chassis Lighting Color None Maximum CPU Cooler Height 173 Maximum GPU Length 349 Motherboard Form Factors Supported ATX Motherboard Form Factors Supported MicroATX Motherboard Form Factors Supported Mini-ITX PCI Expansion Slot Positions 7 Power Supply Form Factor Supported ATX Power Supply Maximum Length 180 Power Supply Mounting Location Bottom Side Window? YesWeight 20.2 All Specs Fractal Design boosts its latest Meshify PC case with a trio of 140mm ARGB fans behind its now-iconic “crumpled mesh” front face. Starting at a mid-market for its base model, the Meshify 3 also comes in upgraded versions with nifty extras that creep up the price. These include items like ARGB fan trim, ARGB side panel lighting, an ARGB strip surrounding the face panel, and even an ARGB controller that connects to the web. Taken together, all that can bump the price as high as the MSRP for the deluxe, spectacular Ambience Pro RGB version of the case we tested. Whatever the feature mix you opt for, the case’s robust cooling performance shines. At the high end of the range, though, factor in the case’s biggest shortfall—its lack of inlet-air dust filtration—given what competitors deliver in -plus cases. Our current ATX tower favorite, the NZXT H7 Flow, isn't much better equipped with filters and isn't as striking as the Ambience Pro case in all its lit glory, but it costs much less.Design: A Crumpled ClassicPC-case feature trends have changed a bit in the eight years that Fractal Design has been putting its signature crumpled-mesh faces on classic mid-tower cases.This latest version adds an air deflector at the front of the power supply shroud to force a bit more airflow past your hot graphics card. This Ambience Pro RGB variant’s feature set, as noted, has a USB-based ARGB controller, as well as lighting around the front face, along the bottom of the left side panel’s window, and on the three fans. Buyers willing to forgo most of the lit-up bling can get the basic “RGB” version with just the fan lighting for and those willing to give up even that helping of ARGB can get the base “TG” version for Our sample was in white; all three models are also available in black, and buyers who yearn for further simplification will find an additional “Solid” variant sold exclusively in black, with a painted steel panel on the left side in place of the window.Fractal Design has merged the headphone and microphone jacks of previous versions into a single four-pole connector on the Meshify 3. This connector functions as a normal headphone jack when one is plugged in; the extra pole serves the monaural microphone of a combined headset plug. Fractal also ditched the reset button of previous cases, but kept the twin USB 3 Type-A and a single Type-C port. And, this time around, the lighted power-on indicator ring that surrounds the power button is ARGB.Though the mesh that covers the face and top panel could potentially filter out some inbound dust, the only part of the Meshify 3 that’s explicitly designed as a dust trap is under the power supply’s air inlet. Sliding out from the case’s side, it’s partially disguised as a portion of the rear case foot.The Meshify 3’s back panel features a pattern of vent slots spaced to allow a fan to be screwed directly into the slots. Also back here are surface-mounted PCI Express expansion-card slots with replaceable covers, a plastic screw-tab cover with a built-in push tab at the bottom to ease its removal, and a removable power supply bracket that’s secured with two large knurled screws. Power supply insertion is through the case’s rear panel; the design lacks the space to slide in the power supply from the side.Both side panels are secured at the top with snaps, and Fractal Design added a pair of tabs to make that task a little easier. Those tabs also have screw holes, enabling you to further secure your side panels against accidental removal.A nylon pull tab at the center of the top panel’s back edge serves a similar function. To release that panel and lift it off, you must first slide it back a quarter inch or so.The front ARGB fans have 140mm frames, but there’s too little space behind them to mount a 420mm-format radiator vertically. That’s because radiator end caps tend to extend the total size by around 40mm.On the other hand, those really motivated to place a radiator behind the front panel’s fans will find that a 360mm-format unit will work, but only by removing the 140mm fans and flipping the fan-mount brackets over.Fractal Design’s brilliance shines through with these very basic sheet-metal brackets that flip to support either 120mm or 140mm fans without hindering airflow.The top panel is fully removable to ease radiator installation and removal, but it does not benefit from the front panel’s design wizardry. While its straight-edged brackets will cover a portion of the fan’s blades when fans are mounted directly on them, its 330mm-plus of length is sufficient to support every 280mm-format radiator we can think of.Also, notice the removable cable shroud running up and down the case near the front. It is adjustable to fit motherboards up to 10.9 inches deep. That is less than the 13-inch max depth of Extended ATX, but it’s still sufficient to fit the slightly oversized enthusiast-class motherboard models that sometimes still get called EATX.The lower front fan’s air deflector is removable and sits far enough above the case’s floor to be used in conjunction with a pair of 2.5-inch drive bays hidden beneath it.We removed the cable shroud for a clearer shot of this area. Keen observers might note the mounting slot for its lower edge at the top of the photo.Two drive trays, three push-in cable clips, and the ARGB controller are all found behind the motherboard tray. The card bracket’s removable covers and the removable power supply bracket are shown in the image below detached and in front of the case, and the photo also shows the gap beneath the removable front fan duct into which some builders may want to install a pair of 2.5-inch drives.Recommended by Our EditorsMore drive storage is visible here on the back of the motherboard tray. Configured from the factory to hold two 3.5-inch drives, these brackets on the back of the motherboard tray can be repositioned to hold four 2.5-inch drives instead.Held in place by a hook-and-loop Velcro-style strap, the included ARGB controller has USB and PWM input on the top, proprietary combination connectors on the side, and an old-fashioned SATA power connector on its bottom to power it up.Note that Fractal designed special outer shells on the proprietary ARGB/PWM combo connectors. This design is to prevent them from being mistakenly connected to anything USB Type-C, from which they appear to borrow their form. As with several others, this photo again shows the 10mm gap between the bottom panel’s 2.5-inch drive mounts and the underside of the front fan’s air guide.As for the controller box itself, here’s a shot of the connectors that we couldn’t see in the ARGB controller’s previous photos, including the SATA power inlet.Of the two output cables we did see, one is for the case's chain of fans, and the other is for this version of the case’s “Ambience Pro” lighting. Four telescoping contact pins allow the front panel’s portion to separate easily from the rest of that latter cable without an awkward tether.Building With the Fractal Design Meshify 3: Perfect Parts PacksFractal's accessory kits are hard to top in terms of neatness and clear labeling. Start with the screws: The Meshify 3 includes 24 M3 mounting screws, nine #6-32 screws to attach the motherboard to case standoffs, four #6-32 screws with hex/Phillips combo heads for power supply installation, and eight #6-32 shoulder screws for mounting 3.5-inch drives on damping grommets.You also get eight damping grommets, four cable ties, and an extra motherboard standoff.Our case being the Ambience Pro RGB version, it also includes a breakout cable that goes from the case’s proprietary ARGB/PWM connector to a standard ARGB strip and a standard PWM fan, along with an extension cable for the proprietary connector.Connecting the case to our motherboard are a power-button lead, an HD Audio header cable for the headset combo jack, a 19-pin USB 3.x for the Type-A ports, and a Gen 2x2 Type-E internal cable for the single Type-C external port. The case’s RGB controller also connects to one our motherboard’s USB 2.0 breakout headers and one of its PWM fan headers.The white version of the Meshify 3 includes chrome hardware, but since our standard Asus ATX test motherboard is black, I flexed my design chops and used black screws to attach it. I can also divulge that I initially forgot to reinstall the cable shroud, which required me later in the build to remove the graphics card, install the shroud, and reinstall the card. Oops!The RGB controller uses a web interface to select its various lighting and fan modes, rather than forcing users to install software, and it stores those settings on the controller rather than leaving components in the OS. You can dictate a "startup" lighting effect separately from the regular run of lighting that the case cycles through. Using it allowed us to switch from the case’s soft blue default to something a little more, shall we say, festive.The light controller’s “Sunset” mode looked like a softer variation of our CPU cooler’s Rainbow mode in this test. Nice.Testing the Fractal Design Meshify 3: Cool It, ManToday’s build leverages the ATX hardware from our most recent case evaluation platform, including its full-sized Cooler Master GX III Gold 850W power supply and mid-size Corsair iCue H100i RGB Pro XT CPU cooler.Apparently, that little scoop that pushes air upward from the lower of the three front fans does have some positive effect on overall case temperature. Our CPU, motherboard, and GPU numbers all show slightly lower temperatures than its five most closely-matched recently reviewed rivals.And just in case you thought that Fractal Design might have gotten its high score by overspeeding its fans a bit…it didn’t. Fan noise is tied for second place in this test group, behind the Super Flower Zillion Direct.The biggest nit we can pick is that some of the Meshify 3’s airflow enhancement might be due to its lack of flow-restricting dust filters. #fractal #design #meshify
    ME.PCMAG.COM
    Fractal Design Meshify 3
    Pros Excellent cooling performanceBrilliantly designed front fan bracketsBeautiful lighting effects in tested Ambience Pro RGB versionElaborate, web-accessible software controls for lighting, fans Cons Only minimal dust filtrationHigh price for our Ambience Pro test model Fractal Design Meshify 3 Specs 120mm or 140mm Fan Positions 6 120mm to 200mm Fans Included 3 Dimensions (HWD) 20.1 by 9.1 by 17.2 inches Fan Controller Included? Front Panel Ports HD Audio Front Panel Ports USB 3.2 Gen 1 Type-A (2) Front Panel Ports USB 3.2 Gen 2 Type-C Included Fan Lighting Color Addressable RGB Internal 2.5-Inch Bays 6 Internal 3.5-Inch Bays 2 Internal Chassis Lighting Color None Maximum CPU Cooler Height 173 Maximum GPU Length 349 Motherboard Form Factors Supported ATX Motherboard Form Factors Supported MicroATX Motherboard Form Factors Supported Mini-ITX PCI Expansion Slot Positions 7 Power Supply Form Factor Supported ATX Power Supply Maximum Length 180 Power Supply Mounting Location Bottom Side Window(s)? Yes (Tempered Glass) Weight 20.2 All Specs Fractal Design boosts its latest Meshify PC case with a trio of 140mm ARGB fans behind its now-iconic “crumpled mesh” front face. Starting at a mid-market $139.99 for its base model, the Meshify 3 also comes in upgraded versions with nifty extras that creep up the price. These include items like ARGB fan trim, ARGB side panel lighting, an ARGB strip surrounding the face panel, and even an ARGB controller that connects to the web. Taken together, all that can bump the price as high as the $219.99 MSRP for the deluxe, spectacular Ambience Pro RGB version of the case we tested. Whatever the feature mix you opt for, the case’s robust cooling performance shines. At the high end of the range, though, factor in the case’s biggest shortfall—its lack of inlet-air dust filtration—given what competitors deliver in $200-plus cases. Our current ATX tower favorite, the NZXT H7 Flow, isn't much better equipped with filters and isn't as striking as the Ambience Pro case in all its lit glory, but it costs much less.Design: A Crumpled ClassicPC-case feature trends have changed a bit in the eight years that Fractal Design has been putting its signature crumpled-mesh faces on classic mid-tower cases. (The aesthetic crumpling is easier to see in photos of the shinier black finish, such as the Meshify 2 we reviewed in 2021.) This latest version adds an air deflector at the front of the power supply shroud to force a bit more airflow past your hot graphics card. This Ambience Pro RGB variant’s feature set, as noted, has a USB-based ARGB controller, as well as lighting around the front face, along the bottom of the left side panel’s window, and on the three fans. Buyers willing to forgo most of the lit-up bling can get the basic “RGB” version with just the fan lighting for $159.99, and those willing to give up even that helping of ARGB can get the base “TG” version for $139.99. Our sample was in white; all three models are also available in black, and buyers who yearn for further simplification will find an additional “Solid” variant sold exclusively in black, with a painted steel panel on the left side in place of the window.Fractal Design has merged the headphone and microphone jacks of previous versions into a single four-pole connector on the Meshify 3. This connector functions as a normal headphone jack when one is plugged in; the extra pole serves the monaural microphone of a combined headset plug. Fractal also ditched the reset button of previous cases, but kept the twin USB 3 Type-A and a single Type-C port. And, this time around, the lighted power-on indicator ring that surrounds the power button is ARGB.(Credit: Thomas Soderstrom)Though the mesh that covers the face and top panel could potentially filter out some inbound dust, the only part of the Meshify 3 that’s explicitly designed as a dust trap is under the power supply’s air inlet. Sliding out from the case’s side, it’s partially disguised as a portion of the rear case foot.(Credit: Thomas Soderstrom)The Meshify 3’s back panel features a pattern of vent slots spaced to allow a fan to be screwed directly into the slots. Also back here are surface-mounted PCI Express expansion-card slots with replaceable covers, a plastic screw-tab cover with a built-in push tab at the bottom to ease its removal, and a removable power supply bracket that’s secured with two large knurled screws. Power supply insertion is through the case’s rear panel; the design lacks the space to slide in the power supply from the side.(Credit: Thomas Soderstrom)Both side panels are secured at the top with snaps, and Fractal Design added a pair of tabs to make that task a little easier. Those tabs also have screw holes, enabling you to further secure your side panels against accidental removal.A nylon pull tab at the center of the top panel’s back edge serves a similar function. To release that panel and lift it off, you must first slide it back a quarter inch or so.(Credit: Thomas Soderstrom)The front ARGB fans have 140mm frames, but there’s too little space behind them to mount a 420mm-format radiator vertically. That’s because radiator end caps tend to extend the total size by around 40mm (give or take 6mm).(Credit: Thomas Soderstrom)On the other hand, those really motivated to place a radiator behind the front panel’s fans will find that a 360mm-format unit will work, but only by removing the 140mm fans and flipping the fan-mount brackets over. (They are visible in the image below.) Fractal Design’s brilliance shines through with these very basic sheet-metal brackets that flip to support either 120mm or 140mm fans without hindering airflow.(Credit: Thomas Soderstrom)The top panel is fully removable to ease radiator installation and removal, but it does not benefit from the front panel’s design wizardry. While its straight-edged brackets will cover a portion of the fan’s blades when fans are mounted directly on them, its 330mm-plus of length is sufficient to support every 280mm-format radiator we can think of.Also, notice the removable cable shroud running up and down the case near the front. It is adjustable to fit motherboards up to 10.9 inches deep. That is less than the 13-inch max depth of Extended ATX, but it’s still sufficient to fit the slightly oversized enthusiast-class motherboard models that sometimes still get called EATX.(Credit: Thomas Soderstrom)The lower front fan’s air deflector is removable and sits far enough above the case’s floor to be used in conjunction with a pair of 2.5-inch drive bays hidden beneath it. (We don’t even want to think about how we’d manage the cables in that configuration, however.)We removed the cable shroud for a clearer shot of this area. Keen observers might note the mounting slot for its lower edge at the top of the photo.(Credit: Thomas Soderstrom)Two drive trays, three push-in cable clips, and the ARGB controller are all found behind the motherboard tray. The card bracket’s removable covers and the removable power supply bracket are shown in the image below detached and in front of the case, and the photo also shows the gap beneath the removable front fan duct into which some builders may want to install a pair of 2.5-inch drives.Recommended by Our Editors(Credit: Thomas Soderstrom)More drive storage is visible here on the back of the motherboard tray. Configured from the factory to hold two 3.5-inch drives, these brackets on the back of the motherboard tray can be repositioned to hold four 2.5-inch drives instead.(Credit: Thomas Soderstrom)Held in place by a hook-and-loop Velcro-style strap, the included ARGB controller has USB and PWM input on the top, proprietary combination connectors on the side, and an old-fashioned SATA power connector on its bottom to power it up.(Credit: Thomas Soderstrom)Note that Fractal designed special outer shells on the proprietary ARGB/PWM combo connectors. This design is to prevent them from being mistakenly connected to anything USB Type-C, from which they appear to borrow their form. As with several others, this photo again shows the 10mm gap between the bottom panel’s 2.5-inch drive mounts and the underside of the front fan’s air guide.(Credit: Thomas Soderstrom)As for the controller box itself, here’s a shot of the connectors that we couldn’t see in the ARGB controller’s previous photos, including the SATA power inlet.(Credit: Thomas Soderstrom)Of the two output cables we did see, one is for the case's chain of fans, and the other is for this version of the case’s “Ambience Pro” lighting. Four telescoping contact pins allow the front panel’s portion to separate easily from the rest of that latter cable without an awkward tether.(Credit: Thomas Soderstrom)Building With the Fractal Design Meshify 3: Perfect Parts PacksFractal's accessory kits are hard to top in terms of neatness and clear labeling. Start with the screws: The Meshify 3 includes 24 M3 mounting screws, nine #6-32 screws to attach the motherboard to case standoffs, four #6-32 screws with hex/Phillips combo heads for power supply installation, and eight #6-32 shoulder screws for mounting 3.5-inch drives on damping grommets. (Credit: Thomas Soderstrom)You also get eight damping grommets, four cable ties, and an extra motherboard standoff. (But no extra screw for it! Such is life.) Our case being the Ambience Pro RGB version, it also includes a breakout cable that goes from the case’s proprietary ARGB/PWM connector to a standard ARGB strip and a standard PWM fan, along with an extension cable for the proprietary connector.Connecting the case to our motherboard are a power-button lead, an HD Audio header cable for the headset combo jack, a 19-pin USB 3.x for the Type-A ports, and a Gen 2x2 Type-E internal cable for the single Type-C external port. The case’s RGB controller also connects to one our motherboard’s USB 2.0 breakout headers and one of its PWM fan headers.(Credit: Thomas Soderstrom)The white version of the Meshify 3 includes chrome hardware, but since our standard Asus ATX test motherboard is black, I flexed my design chops and used black screws to attach it. I can also divulge that I initially forgot to reinstall the cable shroud, which required me later in the build to remove the graphics card, install the shroud, and reinstall the card. Oops!(Credit: Thomas Soderstrom)The RGB controller uses a web interface to select its various lighting and fan modes, rather than forcing users to install software, and it stores those settings on the controller rather than leaving components in the OS. You can dictate a "startup" lighting effect separately from the regular run of lighting that the case cycles through. Using it allowed us to switch from the case’s soft blue default to something a little more, shall we say, festive.(Credit: Thomas Soderstrom)(Credit: Thomas Soderstrom)(Credit: Thomas Soderstrom)(Credit: Thomas Soderstrom)The light controller’s “Sunset” mode looked like a softer variation of our CPU cooler’s Rainbow mode in this test. Nice.(Credit: Thomas Soderstrom)Testing the Fractal Design Meshify 3: Cool It, ManToday’s build leverages the ATX hardware from our most recent case evaluation platform, including its full-sized Cooler Master GX III Gold 850W power supply and mid-size Corsair iCue H100i RGB Pro XT CPU cooler.Apparently, that little scoop that pushes air upward from the lower of the three front fans does have some positive effect on overall case temperature. Our CPU, motherboard (voltage-regulator), and GPU numbers all show slightly lower temperatures than its five most closely-matched recently reviewed rivals. (These include the Corsair Frame 4000D, the SilverStone Fara 514X, and the MSI Velox 300R.)And just in case you thought that Fractal Design might have gotten its high score by overspeeding its fans a bit…it didn’t. Fan noise is tied for second place in this test group, behind the Super Flower Zillion Direct.The biggest nit we can pick is that some of the Meshify 3’s airflow enhancement might be due to its lack of flow-restricting dust filters.
    0 Σχόλια 0 Μοιράστηκε
  • MSI MPG Velox 300R Airflow PZ

    Pros
    Supports multiple big radiatorsExcellent dust filtrationSpace for open-loop cooling components

    Cons
    Not fully EATX-compliantMidpack thermal performance in our tests

    MSI MPG Velox 300R Airflow PZ Specs

    120mm or 140mm Fan Positions
    10

    120mm to 200mm Fans Included
    3

    Dimensions20.6 by 9.3 by 19.5 inches

    Fan Controller Included?

    Front Panel Ports
    HD Audio

    Front Panel Ports
    USB 3.2 Gen 1 Type-AFront Panel Ports
    USB 3.2 Gen 2 Type-C

    Included Fan Lighting Color
    Addressable RGB

    Internal 2.5-Inch Bays
    5

    Internal 3.5-Inch Bays
    2

    Internal Chassis Lighting Color
    None

    Maximum CPU Cooler Height
    165

    Maximum GPU Length
    400

    Motherboard Form Factors Supported
    ATX

    Motherboard Form Factors Supported
    MicroATX

    Motherboard Form Factors Supported
    Mini-ITX

    PCI Expansion Slot Positions
    7

    Power Supply Form Factor Supported
    ATX

    Power Supply Maximum Length
    260

    Power Supply Mounting Location
    Bottom

    Side Window?
    YesWeight
    23.5

    All Specs

    MSI has built a formidable reputation over the past four decades, beginning with motherboards and working its way through servers and graphics cards before finally becoming a premier laptop manufacturer. Its name is synonymous with shopping for PC components, but its PC cases usually come to mind only when we think of its prebuilt desktop machines. Built from sturdy materials and loaded with popular features, its MPG Velox 300R Airflow PZ is designed to leave a more lasting impression. Supporting MSI’s reverse-connector Project Zero motherboards and smartly designed for accommodating a substantive build that’s air- or liquid-cooled, the Velox is a worthy rival to Asus’ TUF Gaming cable-hiding case. PC builders weighing a Project Zero build to minimize visible cabling should shortlist this chassis, though the selection of reverse-connector-compatible PC cases is growing fast.Design: Packing in the Features for Project ZeroWith a sturdy steel structure making up most of its 23.5 pounds of heft, the MPG Velox 300R Airflow PZ is as weighty as its name is long.Its numerous strengths include dust filters that cover every air inlet, giant 160mm ARGB intake fans connected to a factory-installed controller/hub, and even a logo-emblazoned low-restriction faceplate that will probably help make any dust that collects on the filter behind it slightly less noticeable as the PC waits for its next cleaning. A light tint on the 4mm-thick tempered glass side panel makes the black 120mm exhaust fan harder to spot against the case’s black interior. Mounted on four snaps and three guide pins, the faceplate easily pulls away to access the front panel’s plastic-framed nylon-sheet dust filter. Secured with three magnets on each side, the filter pulls easily away from the fans for cleaning.Though “front-panel” ports and buttons often end up on the top panel of modern cases, the Velox 300R’s placement is somewhat unusual in that it’s a bit farther away from the actual front of the case than on most cases. Lined up along its right edge are a power button with a power-indicator LED window, an LED mode button, a headsetcombo jack, two USB 3.2 Type-A ports, and a Gen 2x2 Type-C port. Unfortunately, there’s no reset button or drive-activity light.The rear panel features the only Velox 300R vents that aren’t covered in dust filters, though that’s okay; these should probably be viewed as exhaust vents that flow filtered air from those big front-panel fans. We also see the ATX standard’s seven expansion slots, a 120mm exhaust fan screwed onto slots that allow a little vertical adjustment, a power supply mount with two sets of holes to allow inverted mounting, and two vertical vent sections running up the forward and rear portions of the right side panel.The expansion-slot panel is inset, which simplifies graphics card installation. A long dust filter that covers most of the bottom panel slides out the back of the case from beneath the power supply bay.The top panel and two long side panel vents are each covered internally with a perforated metal filter sheet, each of which uses magnetic tape around its periphery to stick to the steel panel.The Velox 300R’s top panel is designed to hold a 360mm-format radiator up to 420mm long.The Velox 300R’s top panel also includes a second set of mounting slots to enable three 140mm fans to be placed there instead.From this angle, we can also see that the power supply cover has two 120mm fan mounts, that an adjustable card brace is attached slightly forward of the power supply cover, and that a removable multi-purpose bracket is factory-mounted to the 120mm fan location at the front of the case’s bottom panel. The bracket is drilled to hold a single 3.5-inch or 2.5-inch drive, as well as a variety of open-loop liquid-cooling pump/reservoir combos.Like the multifunction bracket that sits in front of it, the outer three-quarters of the power supply cover is removable. That fact eased the installation and removal of modular cables on our power supply.The Velox 300R’s motherboard tray includes several extra pass-through holes designed to fit the connector locations of MSI’s Project Zero motherboards, but they are not excluded, in any way we can see, from otherwise supporting its largest competitor’s rear-facing-connector design, Asus BTF. A side mount that can hold up to three 120mm fans and/or 360mm-format radiators up to 440mm long is offset an inch behind the motherboard tray, so that a fan up to 38mm thick could fit behind an EATX motherboard if we add the length of the standoffs to that thickness. We wouldn’t call the Velox an EATX case, because it has no mechanical support to hold 13-inch-long boards, but some slightly bigger-than-ATX boards will fit without requiring such supports.Behind the Velox 300R’s motherboard tray are its ARGB controller/fan hub and two drive trays.The controller’s hub supports four PWM fans and four ARGB devices.Removing the plastic plugs above and below the front-face 160mm factory ARGB fans allows us to see that the fan rails running up and down the face are also removable. Had we also removed the factory-fitted 160mm fans themselves, we could have used the extra mounting holes you can see to move the brackets inward to 140mm or 120mm fan spacing. The 480mm of spacebehind that mount exceeds the length of any 420mm-format radiator we’ve seen, so you could put a really big radiator up front if you so desire. That said, you'll probably want to keep these oversized fans if you are air cooling; they have a nifty design, with an offset circle of blades inside a larger circleThe drive trays include one dual-2.5-inch tray without 3.5-inch provisions and one with 3.5-inch provisions. Installing a 3.5-inch drive fitted with vibration-damping grommets precludes the use of any 2.5-inch drives in the second tray.Recommended by Our EditorsBuilding With the MSI Velox 300RLet's dig into the accessory kit. The Velox 300R includes an installation guide and a case sticker, four combo-head power supply screws, a Phillips-to-hex-adapter socket for installing standoffs, two spare standoffs, and lots of additional screws. These include 21 standard M3 screws, eight M3 and four #6-32 shoulder screws, and 12 extra-long #6-32 screws. You also get a bag of six replacement snaps for the ball-snap side-panel attachments, and two hook-and-loop and six zip-style cable ties.Case cables include a 19-pin USB 3.2 Gen 1 for the Type-A ports, a Type-E Gen 2x2 for the Type-C port, and an F_PANEL combo cable with breakout pins for a reset button that the case itself lacks. The ARGB controller/fan hub accepts PWM and ARGB control signals from the motherboard and is powered by a SATA-style power cable from your PSU.Our standard ATX motherboard fit the Velox 300R perfectly, and its card brace slid up to meet the edge of our test graphics card’s fan bracket nicely.The ARGB controller defaults to obeying the motherboard’s signal whenever its ARGB input is connected to the motherboard, but those who won’t be using motherboard control can also scroll through the controller’s inbuilt patterns via its mode button or even disable lighting entirely simply by holding the button for a few seconds.Here’s how the Velox looked all fleshed out with our standard test parts...MSI also sent along one of its motherboards, based on the Z790 chipset, so we could show this PZcase built with its cable concealment fully deployed. This photo shows how all the cable headers that would have been pointing outward on a traditional motherboard point backward on this model.We’ll have to push some of those ARGB fan controller/hub cables aside to reach the ARGB and ATX12V headers of the Z790 Project Zero motherboard.We’ll also have to stuff away a little more cable length since most of our cables are no longer required to reach around to the front of the board.Though the displaced power and data cabling cleaned up the show side of our build nicely, we still have our graphics card’s supplemental power cableand our AIO CPU cooler’s tubes to contend with. Still, mighty clean and almost "Zero."And though the Z790 Project Zero motherboard has far less lighting than the board from our standardized kit, some would argue that it still looks better thanks to the reduced cable clutter.Testing the MSI Velox 300R: Twice-Benchmarked, Once With Project ZeroHere’s a list of the internal components from both of the above-photographed builds, along with the settings we used for our tests.The Velox 300R’s thermal performance is exactly mid-pack when using our standard test kit, and swapping in the rear-connector motherboard only resulted in a faster-warming voltage regulator. Its temperature control falls behind its most direct competitor, the Asus TUF Gaming GT302 ARGB, in both configurations.The reason the Velox 300R’s cooling performance fell behind the Lian Li Lancool 207 and GT302 ARGB appears fairly obvious when observing our noise charts: It’s quieter than both those cases.Both companies were aware that they could get better thermal results simply by spinning their fans a little harder, but MSI appears to have favored a quieter approach. Be aware that simply enabling the automatic fan profiles for your motherboard could potentially put all three of these cases into a tie with regard to both temperature and noise.
    #msi #mpg #velox #300r #airflow
    MSI MPG Velox 300R Airflow PZ
    Pros Supports multiple big radiatorsExcellent dust filtrationSpace for open-loop cooling components Cons Not fully EATX-compliantMidpack thermal performance in our tests MSI MPG Velox 300R Airflow PZ Specs 120mm or 140mm Fan Positions 10 120mm to 200mm Fans Included 3 Dimensions20.6 by 9.3 by 19.5 inches Fan Controller Included? Front Panel Ports HD Audio Front Panel Ports USB 3.2 Gen 1 Type-AFront Panel Ports USB 3.2 Gen 2 Type-C Included Fan Lighting Color Addressable RGB Internal 2.5-Inch Bays 5 Internal 3.5-Inch Bays 2 Internal Chassis Lighting Color None Maximum CPU Cooler Height 165 Maximum GPU Length 400 Motherboard Form Factors Supported ATX Motherboard Form Factors Supported MicroATX Motherboard Form Factors Supported Mini-ITX PCI Expansion Slot Positions 7 Power Supply Form Factor Supported ATX Power Supply Maximum Length 260 Power Supply Mounting Location Bottom Side Window? YesWeight 23.5 All Specs MSI has built a formidable reputation over the past four decades, beginning with motherboards and working its way through servers and graphics cards before finally becoming a premier laptop manufacturer. Its name is synonymous with shopping for PC components, but its PC cases usually come to mind only when we think of its prebuilt desktop machines. Built from sturdy materials and loaded with popular features, its MPG Velox 300R Airflow PZ is designed to leave a more lasting impression. Supporting MSI’s reverse-connector Project Zero motherboards and smartly designed for accommodating a substantive build that’s air- or liquid-cooled, the Velox is a worthy rival to Asus’ TUF Gaming cable-hiding case. PC builders weighing a Project Zero build to minimize visible cabling should shortlist this chassis, though the selection of reverse-connector-compatible PC cases is growing fast.Design: Packing in the Features for Project ZeroWith a sturdy steel structure making up most of its 23.5 pounds of heft, the MPG Velox 300R Airflow PZ is as weighty as its name is long.Its numerous strengths include dust filters that cover every air inlet, giant 160mm ARGB intake fans connected to a factory-installed controller/hub, and even a logo-emblazoned low-restriction faceplate that will probably help make any dust that collects on the filter behind it slightly less noticeable as the PC waits for its next cleaning. A light tint on the 4mm-thick tempered glass side panel makes the black 120mm exhaust fan harder to spot against the case’s black interior. Mounted on four snaps and three guide pins, the faceplate easily pulls away to access the front panel’s plastic-framed nylon-sheet dust filter. Secured with three magnets on each side, the filter pulls easily away from the fans for cleaning.Though “front-panel” ports and buttons often end up on the top panel of modern cases, the Velox 300R’s placement is somewhat unusual in that it’s a bit farther away from the actual front of the case than on most cases. Lined up along its right edge are a power button with a power-indicator LED window, an LED mode button, a headsetcombo jack, two USB 3.2 Type-A ports, and a Gen 2x2 Type-C port. Unfortunately, there’s no reset button or drive-activity light.The rear panel features the only Velox 300R vents that aren’t covered in dust filters, though that’s okay; these should probably be viewed as exhaust vents that flow filtered air from those big front-panel fans. We also see the ATX standard’s seven expansion slots, a 120mm exhaust fan screwed onto slots that allow a little vertical adjustment, a power supply mount with two sets of holes to allow inverted mounting, and two vertical vent sections running up the forward and rear portions of the right side panel.The expansion-slot panel is inset, which simplifies graphics card installation. A long dust filter that covers most of the bottom panel slides out the back of the case from beneath the power supply bay.The top panel and two long side panel vents are each covered internally with a perforated metal filter sheet, each of which uses magnetic tape around its periphery to stick to the steel panel.The Velox 300R’s top panel is designed to hold a 360mm-format radiator up to 420mm long.The Velox 300R’s top panel also includes a second set of mounting slots to enable three 140mm fans to be placed there instead.From this angle, we can also see that the power supply cover has two 120mm fan mounts, that an adjustable card brace is attached slightly forward of the power supply cover, and that a removable multi-purpose bracket is factory-mounted to the 120mm fan location at the front of the case’s bottom panel. The bracket is drilled to hold a single 3.5-inch or 2.5-inch drive, as well as a variety of open-loop liquid-cooling pump/reservoir combos.Like the multifunction bracket that sits in front of it, the outer three-quarters of the power supply cover is removable. That fact eased the installation and removal of modular cables on our power supply.The Velox 300R’s motherboard tray includes several extra pass-through holes designed to fit the connector locations of MSI’s Project Zero motherboards, but they are not excluded, in any way we can see, from otherwise supporting its largest competitor’s rear-facing-connector design, Asus BTF. A side mount that can hold up to three 120mm fans and/or 360mm-format radiators up to 440mm long is offset an inch behind the motherboard tray, so that a fan up to 38mm thick could fit behind an EATX motherboard if we add the length of the standoffs to that thickness. We wouldn’t call the Velox an EATX case, because it has no mechanical support to hold 13-inch-long boards, but some slightly bigger-than-ATX boards will fit without requiring such supports.Behind the Velox 300R’s motherboard tray are its ARGB controller/fan hub and two drive trays.The controller’s hub supports four PWM fans and four ARGB devices.Removing the plastic plugs above and below the front-face 160mm factory ARGB fans allows us to see that the fan rails running up and down the face are also removable. Had we also removed the factory-fitted 160mm fans themselves, we could have used the extra mounting holes you can see to move the brackets inward to 140mm or 120mm fan spacing. The 480mm of spacebehind that mount exceeds the length of any 420mm-format radiator we’ve seen, so you could put a really big radiator up front if you so desire. That said, you'll probably want to keep these oversized fans if you are air cooling; they have a nifty design, with an offset circle of blades inside a larger circleThe drive trays include one dual-2.5-inch tray without 3.5-inch provisions and one with 3.5-inch provisions. Installing a 3.5-inch drive fitted with vibration-damping grommets precludes the use of any 2.5-inch drives in the second tray.Recommended by Our EditorsBuilding With the MSI Velox 300RLet's dig into the accessory kit. The Velox 300R includes an installation guide and a case sticker, four combo-head power supply screws, a Phillips-to-hex-adapter socket for installing standoffs, two spare standoffs, and lots of additional screws. These include 21 standard M3 screws, eight M3 and four #6-32 shoulder screws, and 12 extra-long #6-32 screws. You also get a bag of six replacement snaps for the ball-snap side-panel attachments, and two hook-and-loop and six zip-style cable ties.Case cables include a 19-pin USB 3.2 Gen 1 for the Type-A ports, a Type-E Gen 2x2 for the Type-C port, and an F_PANEL combo cable with breakout pins for a reset button that the case itself lacks. The ARGB controller/fan hub accepts PWM and ARGB control signals from the motherboard and is powered by a SATA-style power cable from your PSU.Our standard ATX motherboard fit the Velox 300R perfectly, and its card brace slid up to meet the edge of our test graphics card’s fan bracket nicely.The ARGB controller defaults to obeying the motherboard’s signal whenever its ARGB input is connected to the motherboard, but those who won’t be using motherboard control can also scroll through the controller’s inbuilt patterns via its mode button or even disable lighting entirely simply by holding the button for a few seconds.Here’s how the Velox looked all fleshed out with our standard test parts...MSI also sent along one of its motherboards, based on the Z790 chipset, so we could show this PZcase built with its cable concealment fully deployed. This photo shows how all the cable headers that would have been pointing outward on a traditional motherboard point backward on this model.We’ll have to push some of those ARGB fan controller/hub cables aside to reach the ARGB and ATX12V headers of the Z790 Project Zero motherboard.We’ll also have to stuff away a little more cable length since most of our cables are no longer required to reach around to the front of the board.Though the displaced power and data cabling cleaned up the show side of our build nicely, we still have our graphics card’s supplemental power cableand our AIO CPU cooler’s tubes to contend with. Still, mighty clean and almost "Zero."And though the Z790 Project Zero motherboard has far less lighting than the board from our standardized kit, some would argue that it still looks better thanks to the reduced cable clutter.Testing the MSI Velox 300R: Twice-Benchmarked, Once With Project ZeroHere’s a list of the internal components from both of the above-photographed builds, along with the settings we used for our tests.The Velox 300R’s thermal performance is exactly mid-pack when using our standard test kit, and swapping in the rear-connector motherboard only resulted in a faster-warming voltage regulator. Its temperature control falls behind its most direct competitor, the Asus TUF Gaming GT302 ARGB, in both configurations.The reason the Velox 300R’s cooling performance fell behind the Lian Li Lancool 207 and GT302 ARGB appears fairly obvious when observing our noise charts: It’s quieter than both those cases.Both companies were aware that they could get better thermal results simply by spinning their fans a little harder, but MSI appears to have favored a quieter approach. Be aware that simply enabling the automatic fan profiles for your motherboard could potentially put all three of these cases into a tie with regard to both temperature and noise. #msi #mpg #velox #300r #airflow
    ME.PCMAG.COM
    MSI MPG Velox 300R Airflow PZ
    Pros Supports multiple big radiatorsExcellent dust filtrationSpace for open-loop cooling components Cons Not fully EATX-compliantMidpack thermal performance in our tests MSI MPG Velox 300R Airflow PZ Specs 120mm or 140mm Fan Positions 10 120mm to 200mm Fans Included 3 Dimensions (HWD) 20.6 by 9.3 by 19.5 inches Fan Controller Included? Front Panel Ports HD Audio Front Panel Ports USB 3.2 Gen 1 Type-A (2) Front Panel Ports USB 3.2 Gen 2 Type-C Included Fan Lighting Color Addressable RGB Internal 2.5-Inch Bays 5 Internal 3.5-Inch Bays 2 Internal Chassis Lighting Color None Maximum CPU Cooler Height 165 Maximum GPU Length 400 Motherboard Form Factors Supported ATX Motherboard Form Factors Supported MicroATX Motherboard Form Factors Supported Mini-ITX PCI Expansion Slot Positions 7 Power Supply Form Factor Supported ATX Power Supply Maximum Length 260 Power Supply Mounting Location Bottom Side Window(s)? Yes (Tempered Glass) Weight 23.5 All Specs MSI has built a formidable reputation over the past four decades, beginning with motherboards and working its way through servers and graphics cards before finally becoming a premier laptop manufacturer. Its name is synonymous with shopping for PC components, but its PC cases usually come to mind only when we think of its prebuilt desktop machines. Built from sturdy materials and loaded with popular features, its $149.99 MPG Velox 300R Airflow PZ is designed to leave a more lasting impression. Supporting MSI’s reverse-connector Project Zero motherboards and smartly designed for accommodating a substantive build that’s air- or liquid-cooled, the Velox is a worthy rival to Asus’ TUF Gaming cable-hiding case. PC builders weighing a Project Zero build to minimize visible cabling should shortlist this chassis, though the selection of reverse-connector-compatible PC cases is growing fast.Design: Packing in the Features for Project ZeroWith a sturdy steel structure making up most of its 23.5 pounds of heft, the MPG Velox 300R Airflow PZ is as weighty as its name is long. (We’ll call it“Velox 300R” from here on out.) Its numerous strengths include dust filters that cover every air inlet, giant 160mm ARGB intake fans connected to a factory-installed controller/hub, and even a logo-emblazoned low-restriction faceplate that will probably help make any dust that collects on the filter behind it slightly less noticeable as the PC waits for its next cleaning. A light tint on the 4mm-thick tempered glass side panel makes the black 120mm exhaust fan harder to spot against the case’s black interior. Mounted on four snaps and three guide pins, the faceplate easily pulls away to access the front panel’s plastic-framed nylon-sheet dust filter. Secured with three magnets on each side, the filter pulls easily away from the fans for cleaning.(Credit: Thomas Soderstrom)Though “front-panel” ports and buttons often end up on the top panel of modern cases, the Velox 300R’s placement is somewhat unusual in that it’s a bit farther away from the actual front of the case than on most cases. Lined up along its right edge are a power button with a power-indicator LED window, an LED mode button, a headset (headphone/microphone) combo jack, two USB 3.2 Type-A ports, and a Gen 2x2 Type-C port. Unfortunately, there’s no reset button or drive-activity light.(Credit: Thomas Soderstrom)The rear panel features the only Velox 300R vents that aren’t covered in dust filters, though that’s okay; these should probably be viewed as exhaust vents that flow filtered air from those big front-panel fans. We also see the ATX standard’s seven expansion slots, a 120mm exhaust fan screwed onto slots that allow a little vertical adjustment, a power supply mount with two sets of holes to allow inverted mounting, and two vertical vent sections running up the forward and rear portions of the right side panel.The expansion-slot panel is inset, which simplifies graphics card installation. (In short: There's no interference between the card bracket and the clearance area above the screws, as there sometimes is with cheaper cases with non-inset panels.) (Credit: Thomas Soderstrom)A long dust filter that covers most of the bottom panel slides out the back of the case from beneath the power supply bay.(Credit: Thomas Soderstrom)The top panel and two long side panel vents are each covered internally with a perforated metal filter sheet, each of which uses magnetic tape around its periphery to stick to the steel panel.(Credit: Thomas Soderstrom)The Velox 300R’s top panel is designed to hold a 360mm-format radiator up to 420mm long. (The radiator will have around 57mm of clearance above the motherboard’s top edge.) The Velox 300R’s top panel also includes a second set of mounting slots to enable three 140mm fans to be placed there instead.From this angle, we can also see that the power supply cover has two 120mm fan mounts, that an adjustable card brace is attached slightly forward of the power supply cover, and that a removable multi-purpose bracket is factory-mounted to the 120mm fan location at the front of the case’s bottom panel. The bracket is drilled to hold a single 3.5-inch or 2.5-inch drive, as well as a variety of open-loop liquid-cooling pump/reservoir combos.(Credit: Thomas Soderstrom)Like the multifunction bracket that sits in front of it, the outer three-quarters of the power supply cover is removable. That fact eased the installation and removal of modular cables on our power supply.(Credit: Thomas Soderstrom)The Velox 300R’s motherboard tray includes several extra pass-through holes designed to fit the connector locations of MSI’s Project Zero motherboards, but they are not excluded, in any way we can see, from otherwise supporting its largest competitor’s rear-facing-connector design, Asus BTF. A side mount that can hold up to three 120mm fans and/or 360mm-format radiators up to 440mm long is offset an inch behind the motherboard tray, so that a fan up to 38mm thick could fit behind an EATX motherboard if we add the length of the standoffs to that thickness. We wouldn’t call the Velox an EATX case, because it has no mechanical support to hold 13-inch-long boards, but some slightly bigger-than-ATX boards will fit without requiring such supports.(Credit: Thomas Soderstrom)Behind the Velox 300R’s motherboard tray are its ARGB controller/fan hub and two drive trays. (Note that we also pulled the face panel off for our open case photos.) The controller’s hub supports four PWM fans and four ARGB devices.(Credit: Thomas Soderstrom)Removing the plastic plugs above and below the front-face 160mm factory ARGB fans allows us to see that the fan rails running up and down the face are also removable. Had we also removed the factory-fitted 160mm fans themselves, we could have used the extra mounting holes you can see to move the brackets inward to 140mm or 120mm fan spacing. The 480mm of space (height) behind that mount exceeds the length of any 420mm-format radiator we’ve seen, so you could put a really big radiator up front if you so desire. That said, you'll probably want to keep these oversized fans if you are air cooling; they have a nifty design, with an offset circle of blades inside a larger circle(Credit: Thomas Soderstrom)The drive trays include one dual-2.5-inch tray without 3.5-inch provisions and one with 3.5-inch provisions. Installing a 3.5-inch drive fitted with vibration-damping grommets precludes the use of any 2.5-inch drives in the second tray.Recommended by Our Editors(Credit: Thomas Soderstrom)Building With the MSI Velox 300RLet's dig into the accessory kit. The Velox 300R includes an installation guide and a case sticker, four combo-head power supply screws, a Phillips-to-hex-adapter socket for installing standoffs, two spare standoffs, and lots of additional screws. These include 21 standard M3 screws, eight M3 and four #6-32 shoulder screws (for installing drives onto the grommet-filled drive tray), and 12 extra-long #6-32 screws (for installing 120mm fans to the top of the power supply cover). You also get a bag of six replacement snaps for the ball-snap side-panel attachments, and two hook-and-loop and six zip-style cable ties.(Credit: Thomas Soderstrom)Case cables include a 19-pin USB 3.2 Gen 1 for the Type-A ports, a Type-E Gen 2x2 for the Type-C port, and an F_PANEL combo cable with breakout pins for a reset button that the case itself lacks. The ARGB controller/fan hub accepts PWM and ARGB control signals from the motherboard and is powered by a SATA-style power cable from your PSU.(Credit: Thomas Soderstrom)Our standard ATX motherboard fit the Velox 300R perfectly, and its card brace slid up to meet the edge of our test graphics card’s fan bracket nicely.(Credit: Thomas Soderstrom)The ARGB controller defaults to obeying the motherboard’s signal whenever its ARGB input is connected to the motherboard, but those who won’t be using motherboard control can also scroll through the controller’s inbuilt patterns via its mode button or even disable lighting entirely simply by holding the button for a few seconds.Here’s how the Velox looked all fleshed out with our standard test parts...(Credit: Thomas Soderstrom)MSI also sent along one of its motherboards, based on the Z790 chipset, so we could show this PZ (Project Zero) case built with its cable concealment fully deployed. This photo shows how all the cable headers that would have been pointing outward on a traditional motherboard point backward on this model.(Credit: Thomas Soderstrom)We’ll have to push some of those ARGB fan controller/hub cables aside to reach the ARGB and ATX12V headers of the Z790 Project Zero motherboard.(Credit: Thomas Soderstrom)We’ll also have to stuff away a little more cable length since most of our cables are no longer required to reach around to the front of the board.(Credit: Thomas Soderstrom)Though the displaced power and data cabling cleaned up the show side of our build nicely, we still have our graphics card’s supplemental power cable (12VHPWR) and our AIO CPU cooler’s tubes to contend with. Still, mighty clean and almost "Zero."(Credit: Thomas Soderstrom)And though the Z790 Project Zero motherboard has far less lighting than the board from our standardized kit, some would argue that it still looks better thanks to the reduced cable clutter.(Credit: Thomas Soderstrom)Testing the MSI Velox 300R: Twice-Benchmarked, Once With Project ZeroHere’s a list of the internal components from both of the above-photographed builds, along with the settings we used for our tests.The Velox 300R’s thermal performance is exactly mid-pack when using our standard test kit, and swapping in the rear-connector motherboard only resulted in a faster-warming voltage regulator (likely due to the lower mass of its heat sink). Its temperature control falls behind its most direct competitor, the Asus TUF Gaming GT302 ARGB, in both configurations.The reason the Velox 300R’s cooling performance fell behind the Lian Li Lancool 207 and GT302 ARGB appears fairly obvious when observing our noise charts: It’s quieter than both those cases.Both companies were aware that they could get better thermal results simply by spinning their fans a little harder, but MSI appears to have favored a quieter approach. Be aware that simply enabling the automatic fan profiles for your motherboard could potentially put all three of these cases into a tie with regard to both temperature and noise.
    0 Σχόλια 0 Μοιράστηκε
  • Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and $45 Case, ft. CEO

    Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and Case, ft. CEOMay 29, 2025Last Updated: 2025-05-29During Computex 2025, Lian Li showed off several new cases that include the Lancool 4, Lancool 217 Infinity, Lian Li O11 Mini V2, and moreThe HighlightsLian Li's Lancool 4 case has gigantic holes cut into the glass for intake fans, coupling airflow with glassThe company’s Shifting Block PSU has a rotating plug that is geared for back-connect motherboardsThe company’s Vector 100 cases are very cheap, starting at without fansTable of ContentsAutoTOC Buy a GN 4-Pack of PC-themed 3D Coasters! These high-quality, durable, flexible coasters ship in a pack of 4, each with a fully custom design made by GN's team. You'll get a motherboard-themed coaster with debug display & reset buttons, a SATA SSD with to-scale connectors, RAM sticks, and a GN logo. These fund our web work! Buy here.IntroWe visited Lian Li during Computex, where the company showed off several of its upcoming products. We think the most interesting one is the Lancool 4, which has fans built into its glass front panel. It’s supposed to be a case that will come with 6 fans.Editor's note: This was originally published on May 19, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangLancool 4The big thing about the Lancool 4 is that it embeds its fans into the front glass panel. This kind of takes us back to about 20 years ago, but instead of glass, the fans were integrated into acrylic and people would take a hole saw and would mount their own fans into it. One of the challenges with this design pertains to potentially reducing the yields with glass breaking being a concern. This wasn’t something that case companies did before, but Lian Li CEO Jameson Chen tells us the glass manufacturing process has improved dramatically lately. The CEO says that the failure rate used to be abysmal but has gotten down to about 5% to accommodate for the curve of the glass. Drilling holes into the glass brings the failure rate down at least another 5%. To mitigate failure rates, Lian Li found that there needs to be at least a 3cm gap between the holes. Chen revealed that the glass is 4mm thick, which is to bolster its quality.  In between the fans are plastic pieces which are used to hide the cables. The fans also use Pogo pins, which are integrated into the bottom of the front panel. When we asked Chen what happens if one of the fans dies, the CEO stated that Lian Li would provide a 5-year warranty. He elaborated that the fans are a new design and that they are 10% fiberglass PBT. Chen also revealed that the fans use fluid dynamic bearings. Considering Lian Li is still prototyping the case, the company is still thinking about whether to put RGB LEDs on the fan blades or to put the RGB LEDs around the fan’s frames. The Lancool 4 has an aluminum top and the rest of the chassis is made of steel, which is 1mm thick.The back glass panel releases via a button. Chen says this was done so that people could open up the glass panel without opening up the bottom side panel. Looking at the design of the rest of the case, it has a lot of similar panels as seen in the Lancool series. It’s got 4 doors and the 2 on the bottom sides are ventilated mesh and there are fan-mount options on the side. While we were there, Chen told us that Lian Li is considering shortening the case from the front to the back a little bit. This would bring the fans in closer to the components. This will benefit an air cooler and GPU. In our experience, performance in shorter cases, in a like-for-like scenario, is better. Chen also thinks the aesthetics of the case would improve as well with a tighter design. The downside is that the case would no longer support 420mm radiators and would support 360mm radiators max. The back panel of the Lancool 4 uses glass, which would normally expose the cable management but the case will come with a cable cover. There would be 2 screws to remove it. A downside here is that there’s less cable-management space to work with.The Lancool 4’s PSU mount is towards the back and bottom of the case. The bottom front has a cut out, which provides some space to route cables. Shifting Block PSU Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.The company also showed off a new interesting power supply, which has a rotating plug. This creates a shifting layout for the cable connections and allows users to re-orient the PSU. Chen tells us it's designed for top and bottom chamber cases and it’s also geared for back-connect motherboards.  Looking at the PSU, it has its 24-pin connectors off on one side. It also has an optional fan and USB 2.0 hub.Lian Li O11 Mini V2Moving on to the Lian Li O11 Mini V2, it has mesh on one of the side panels that’s popped-out about 3mm, which is to accommodate for ATX PSUs that protrude past the frame of the case. The company designed it this way because it had a very specific width it wanted to tackle to avoid the case looking too chunky. Currently, the volume of the case is 45 liters, which includes the feet, but does not include the protruding mesh side panel. The case we saw used bottom intake fans, which are slanted at 25 degrees and the only place for air access is underneath the back panel side. This is coupled with a tiny dust filter on the bottom, which slides out through the back. In terms of other fan mounts, the case has 2 on the side, 1 on the back, and 3 fans can fit in the top. The Lian Li O11 Mini V2 is targeting without fans and with five 120mm fans. Dan Case B4Moving on to Lian Li’s Dan Case B4, we’ve reviewed Dan cases before. The unit we saw at Computex isn’t done yet. We’re told it’s about 60% completed. The case can rotate and has feet and an extension that allows the case to support up to a 360mm radiator. The downside is that about 30% of one of the radiator’s fans would be obstructed by a metal wall. It’s possible that they may perforate this wall to help with cooling. Lian Li is planning to put some mesh or covering on the front panel of the case. The unit we saw was fully exposed and open. What’s interesting about this layout is that the GPU fans are right up against the case’s front intake fans, which is going to be about as cool as you can get for the video card. Most GPUs these days have vertically-oriented fins where the air is going to come out the sides. In this case, air should come out through the punctured side panel but may re-circulate into the back radiator, especially if its fans are intake. If the fans are oriented to be exhaust, that might work better in this case. Lian Li is planning to provide 2x120mm fans along with the case. The case can also be rotated to look like the image above. 217 Infinity CaseLian Li also showed off its 217 Infinity case, which is the 217 case with an updated front and leans on some of the changes that the Lancool 4 has made to get its fans into its front glass panel. The tooling is mostly the same. The things in the back of the case are all basically identical. The changes pertain to the front panel, which have some giant holes in them to accommodate 170mm fans that are 30mm deep. The glass panel has the infinity mirror styling. The only other major change pertains to the IO. Some people complained that the original 217 had its IO on the bottom side, so now the company has moved it to the top with an option to have it on the bottom side. The case comes with 2x170mm front fans and a rear fan. The black version of the case is targeting with a white version targeting  Lian Li Vector SeriesAnother Lian Li case we looked at had some “functional gimmicks.” On the back side, it has a cut-out area that looks like a handle, but definitely isn’t. Instead, there’s a very fine mesh filter that’s an area that’s meant to help with intake. This should also help with GPU cooling. The case is targeted at the system integrator market, but will still be sold at retail. Lian Li is targeting for it without any fans, but includes an 8.8-inch IPS screen that carries a 1720x4080 resolution. Pricing may change in the US based on tariffs. Vector 100 and Vector 100 MiniThe main reason we’re bringing these 2 cases up is price. The Vector 100 is targetingand the Vector 100 Mini, which is geared for MicroATX, is targeting. Lian Li Wireless FansLian Li also showed off its new wireless fans, which comes with a battery pack. There’s currently no price on it, but it’s designed to allow its users to “flex,” as Chen put it. It comes with a built-in receiver. The fans and RGB LEDs use up to 12 volts. In terms of battery life, the CEO says that 3 fans with their LEDs on will last for about 20 minutes. Hydroshift 2 Liquid Cooler Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!The Hydroshift 2 Liquid Cooler has a click actuation ring around the cooler, which can be used as a software-less switch for the display and all of that is pre-written to the device. This means that toggling it doesn’t require software, though you could use software. Compared to Lian Li’s previous Hydroshift 1, the radiator size has been reduced to offer more compatibility but Lian Li says it’s tried to improve flow within the cooler. The company also pushed the micro fins closer to the heat source.
    #lian #lancool #has #fans #glass
    Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and $45 Case, ft. CEO
    Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and Case, ft. CEOMay 29, 2025Last Updated: 2025-05-29During Computex 2025, Lian Li showed off several new cases that include the Lancool 4, Lancool 217 Infinity, Lian Li O11 Mini V2, and moreThe HighlightsLian Li's Lancool 4 case has gigantic holes cut into the glass for intake fans, coupling airflow with glassThe company’s Shifting Block PSU has a rotating plug that is geared for back-connect motherboardsThe company’s Vector 100 cases are very cheap, starting at without fansTable of ContentsAutoTOC Buy a GN 4-Pack of PC-themed 3D Coasters! These high-quality, durable, flexible coasters ship in a pack of 4, each with a fully custom design made by GN's team. You'll get a motherboard-themed coaster with debug display & reset buttons, a SATA SSD with to-scale connectors, RAM sticks, and a GN logo. These fund our web work! Buy here.IntroWe visited Lian Li during Computex, where the company showed off several of its upcoming products. We think the most interesting one is the Lancool 4, which has fans built into its glass front panel. It’s supposed to be a case that will come with 6 fans.Editor's note: This was originally published on May 19, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangLancool 4The big thing about the Lancool 4 is that it embeds its fans into the front glass panel. This kind of takes us back to about 20 years ago, but instead of glass, the fans were integrated into acrylic and people would take a hole saw and would mount their own fans into it. One of the challenges with this design pertains to potentially reducing the yields with glass breaking being a concern. This wasn’t something that case companies did before, but Lian Li CEO Jameson Chen tells us the glass manufacturing process has improved dramatically lately. The CEO says that the failure rate used to be abysmal but has gotten down to about 5% to accommodate for the curve of the glass. Drilling holes into the glass brings the failure rate down at least another 5%. To mitigate failure rates, Lian Li found that there needs to be at least a 3cm gap between the holes. Chen revealed that the glass is 4mm thick, which is to bolster its quality.  In between the fans are plastic pieces which are used to hide the cables. The fans also use Pogo pins, which are integrated into the bottom of the front panel. When we asked Chen what happens if one of the fans dies, the CEO stated that Lian Li would provide a 5-year warranty. He elaborated that the fans are a new design and that they are 10% fiberglass PBT. Chen also revealed that the fans use fluid dynamic bearings. Considering Lian Li is still prototyping the case, the company is still thinking about whether to put RGB LEDs on the fan blades or to put the RGB LEDs around the fan’s frames. The Lancool 4 has an aluminum top and the rest of the chassis is made of steel, which is 1mm thick.The back glass panel releases via a button. Chen says this was done so that people could open up the glass panel without opening up the bottom side panel. Looking at the design of the rest of the case, it has a lot of similar panels as seen in the Lancool series. It’s got 4 doors and the 2 on the bottom sides are ventilated mesh and there are fan-mount options on the side. While we were there, Chen told us that Lian Li is considering shortening the case from the front to the back a little bit. This would bring the fans in closer to the components. This will benefit an air cooler and GPU. In our experience, performance in shorter cases, in a like-for-like scenario, is better. Chen also thinks the aesthetics of the case would improve as well with a tighter design. The downside is that the case would no longer support 420mm radiators and would support 360mm radiators max. The back panel of the Lancool 4 uses glass, which would normally expose the cable management but the case will come with a cable cover. There would be 2 screws to remove it. A downside here is that there’s less cable-management space to work with.The Lancool 4’s PSU mount is towards the back and bottom of the case. The bottom front has a cut out, which provides some space to route cables. Shifting Block PSU Visit our Patreon page to contribute a few dollars toward this website's operationAdditionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.The company also showed off a new interesting power supply, which has a rotating plug. This creates a shifting layout for the cable connections and allows users to re-orient the PSU. Chen tells us it's designed for top and bottom chamber cases and it’s also geared for back-connect motherboards.  Looking at the PSU, it has its 24-pin connectors off on one side. It also has an optional fan and USB 2.0 hub.Lian Li O11 Mini V2Moving on to the Lian Li O11 Mini V2, it has mesh on one of the side panels that’s popped-out about 3mm, which is to accommodate for ATX PSUs that protrude past the frame of the case. The company designed it this way because it had a very specific width it wanted to tackle to avoid the case looking too chunky. Currently, the volume of the case is 45 liters, which includes the feet, but does not include the protruding mesh side panel. The case we saw used bottom intake fans, which are slanted at 25 degrees and the only place for air access is underneath the back panel side. This is coupled with a tiny dust filter on the bottom, which slides out through the back. In terms of other fan mounts, the case has 2 on the side, 1 on the back, and 3 fans can fit in the top. The Lian Li O11 Mini V2 is targeting without fans and with five 120mm fans. Dan Case B4Moving on to Lian Li’s Dan Case B4, we’ve reviewed Dan cases before. The unit we saw at Computex isn’t done yet. We’re told it’s about 60% completed. The case can rotate and has feet and an extension that allows the case to support up to a 360mm radiator. The downside is that about 30% of one of the radiator’s fans would be obstructed by a metal wall. It’s possible that they may perforate this wall to help with cooling. Lian Li is planning to put some mesh or covering on the front panel of the case. The unit we saw was fully exposed and open. What’s interesting about this layout is that the GPU fans are right up against the case’s front intake fans, which is going to be about as cool as you can get for the video card. Most GPUs these days have vertically-oriented fins where the air is going to come out the sides. In this case, air should come out through the punctured side panel but may re-circulate into the back radiator, especially if its fans are intake. If the fans are oriented to be exhaust, that might work better in this case. Lian Li is planning to provide 2x120mm fans along with the case. The case can also be rotated to look like the image above. 217 Infinity CaseLian Li also showed off its 217 Infinity case, which is the 217 case with an updated front and leans on some of the changes that the Lancool 4 has made to get its fans into its front glass panel. The tooling is mostly the same. The things in the back of the case are all basically identical. The changes pertain to the front panel, which have some giant holes in them to accommodate 170mm fans that are 30mm deep. The glass panel has the infinity mirror styling. The only other major change pertains to the IO. Some people complained that the original 217 had its IO on the bottom side, so now the company has moved it to the top with an option to have it on the bottom side. The case comes with 2x170mm front fans and a rear fan. The black version of the case is targeting with a white version targeting  Lian Li Vector SeriesAnother Lian Li case we looked at had some “functional gimmicks.” On the back side, it has a cut-out area that looks like a handle, but definitely isn’t. Instead, there’s a very fine mesh filter that’s an area that’s meant to help with intake. This should also help with GPU cooling. The case is targeted at the system integrator market, but will still be sold at retail. Lian Li is targeting for it without any fans, but includes an 8.8-inch IPS screen that carries a 1720x4080 resolution. Pricing may change in the US based on tariffs. Vector 100 and Vector 100 MiniThe main reason we’re bringing these 2 cases up is price. The Vector 100 is targetingand the Vector 100 Mini, which is geared for MicroATX, is targeting. Lian Li Wireless FansLian Li also showed off its new wireless fans, which comes with a battery pack. There’s currently no price on it, but it’s designed to allow its users to “flex,” as Chen put it. It comes with a built-in receiver. The fans and RGB LEDs use up to 12 volts. In terms of battery life, the CEO says that 3 fans with their LEDs on will last for about 20 minutes. Hydroshift 2 Liquid Cooler Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work!The Hydroshift 2 Liquid Cooler has a click actuation ring around the cooler, which can be used as a software-less switch for the display and all of that is pre-written to the device. This means that toggling it doesn’t require software, though you could use software. Compared to Lian Li’s previous Hydroshift 1, the radiator size has been reduced to offer more compatibility but Lian Li says it’s tried to improve flow within the cooler. The company also pushed the micro fins closer to the heat source. #lian #lancool #has #fans #glass
    GAMERSNEXUS.NET
    Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and $45 Case, ft. CEO
    Lian Li Lancool 4 Has Fans in Glass, 217 Infinity, DAN B4, and $45 Case, ft. CEOMay 29, 2025Last Updated: 2025-05-29During Computex 2025, Lian Li showed off several new cases that include the Lancool 4, Lancool 217 Infinity, Lian Li O11 Mini V2, and moreThe HighlightsLian Li's Lancool 4 case has gigantic holes cut into the glass for intake fans, coupling airflow with glassThe company’s Shifting Block PSU has a rotating plug that is geared for back-connect motherboardsThe company’s Vector 100 cases are very cheap, starting at $45 without fansTable of ContentsAutoTOC Buy a GN 4-Pack of PC-themed 3D Coasters! These high-quality, durable, flexible coasters ship in a pack of 4, each with a fully custom design made by GN's team. You'll get a motherboard-themed coaster with debug display & reset buttons, a SATA SSD with to-scale connectors, RAM sticks, and a GN logo. These fund our web work! Buy here.IntroWe visited Lian Li during Computex, where the company showed off several of its upcoming products. We think the most interesting one is the Lancool 4, which has fans built into its glass front panel. It’s supposed to be a $130 case that will come with 6 fans.Editor's note: This was originally published on May 19, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangLancool 4The big thing about the Lancool 4 is that it embeds its fans into the front glass panel. This kind of takes us back to about 20 years ago, but instead of glass, the fans were integrated into acrylic and people would take a hole saw and would mount their own fans into it. One of the challenges with this design pertains to potentially reducing the yields with glass breaking being a concern. This wasn’t something that case companies did before, but Lian Li CEO Jameson Chen tells us the glass manufacturing process has improved dramatically lately. The CEO says that the failure rate used to be abysmal but has gotten down to about 5% to accommodate for the curve of the glass. Drilling holes into the glass brings the failure rate down at least another 5%. To mitigate failure rates, Lian Li found that there needs to be at least a 3cm gap between the holes. Chen revealed that the glass is 4mm thick, which is to bolster its quality.  In between the fans are plastic pieces which are used to hide the cables. The fans also use Pogo pins, which are integrated into the bottom of the front panel. When we asked Chen what happens if one of the fans dies, the CEO stated that Lian Li would provide a 5-year warranty. He elaborated that the fans are a new design and that they are 10% fiberglass PBT. Chen also revealed that the fans use fluid dynamic bearings (FDB). Considering Lian Li is still prototyping the case, the company is still thinking about whether to put RGB LEDs on the fan blades or to put the RGB LEDs around the fan’s frames. The Lancool 4 has an aluminum top and the rest of the chassis is made of steel, which is 1mm thick.The back glass panel releases via a button. Chen says this was done so that people could open up the glass panel without opening up the bottom side panel. Looking at the design of the rest of the case, it has a lot of similar panels as seen in the Lancool series. It’s got 4 doors and the 2 on the bottom sides are ventilated mesh and there are fan-mount options on the side. While we were there, Chen told us that Lian Li is considering shortening the case from the front to the back a little bit. This would bring the fans in closer to the components. This will benefit an air cooler and GPU. In our experience, performance in shorter cases, in a like-for-like scenario, is better. Chen also thinks the aesthetics of the case would improve as well with a tighter design. The downside is that the case would no longer support 420mm radiators and would support 360mm radiators max. The back panel of the Lancool 4 uses glass, which would normally expose the cable management but the case will come with a cable cover. There would be 2 screws to remove it. A downside here is that there’s less cable-management space to work with.The Lancool 4’s PSU mount is towards the back and bottom of the case. The bottom front has a cut out, which provides some space to route cables. Shifting Block PSU Visit our Patreon page to contribute a few dollars toward this website's operation (or consider a direct donation or buying something from our GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.The company also showed off a new interesting power supply, which has a rotating plug. This creates a shifting layout for the cable connections and allows users to re-orient the PSU. Chen tells us it's designed for top and bottom chamber cases and it’s also geared for back-connect motherboards.  Looking at the PSU, it has its 24-pin connectors off on one side. It also has an optional fan and USB 2.0 hub.Lian Li O11 Mini V2Moving on to the Lian Li O11 Mini V2, it has mesh on one of the side panels that’s popped-out about 3mm, which is to accommodate for ATX PSUs that protrude past the frame of the case. The company designed it this way because it had a very specific width it wanted to tackle to avoid the case looking too chunky. Currently, the volume of the case is 45 liters, which includes the feet, but does not include the protruding mesh side panel. The case we saw used bottom intake fans, which are slanted at 25 degrees and the only place for air access is underneath the back panel side. This is coupled with a tiny dust filter on the bottom, which slides out through the back. In terms of other fan mounts, the case has 2 on the side, 1 on the back, and 3 fans can fit in the top. The Lian Li O11 Mini V2 is targeting $89 without fans and $99 with five 120mm fans (2 on the side and 3 on the bottom). Dan Case B4Moving on to Lian Li’s Dan Case B4, we’ve reviewed Dan cases before. The unit we saw at Computex isn’t done yet. We’re told it’s about 60% completed. The case can rotate and has feet and an extension that allows the case to support up to a 360mm radiator. The downside is that about 30% of one of the radiator’s fans would be obstructed by a metal wall. It’s possible that they may perforate this wall to help with cooling. Lian Li is planning to put some mesh or covering on the front panel of the case. The unit we saw was fully exposed and open. What’s interesting about this layout is that the GPU fans are right up against the case’s front intake fans, which is going to be about as cool as you can get for the video card. Most GPUs these days have vertically-oriented fins where the air is going to come out the sides. In this case, air should come out through the punctured side panel but may re-circulate into the back radiator, especially if its fans are intake. If the fans are oriented to be exhaust, that might work better in this case. Lian Li is planning to provide 2x120mm fans along with the case. The case can also be rotated to look like the image above. 217 Infinity CaseLian Li also showed off its 217 Infinity case, which is the 217 case with an updated front and leans on some of the changes that the Lancool 4 has made to get its fans into its front glass panel. The tooling is mostly the same. The things in the back of the case are all basically identical. The changes pertain to the front panel, which have some giant holes in them to accommodate 170mm fans that are 30mm deep. The glass panel has the infinity mirror styling. The only other major change pertains to the IO. Some people complained that the original 217 had its IO on the bottom side, so now the company has moved it to the top with an option to have it on the bottom side. The case comes with 2x170mm front fans and a rear fan. The black version of the case is targeting $120 with a white version targeting $125. Lian Li Vector SeriesAnother Lian Li case we looked at had some “functional gimmicks.” On the back side, it has a cut-out area that looks like a handle, but definitely isn’t. Instead, there’s a very fine mesh filter that’s an area that’s meant to help with intake. This should also help with GPU cooling. The case is targeted at the system integrator market, but will still be sold at retail. Lian Li is targeting $110 for it without any fans, but includes an 8.8-inch IPS screen that carries a 1720x4080 resolution. Pricing may change in the US based on tariffs. Vector 100 and Vector 100 MiniThe main reason we’re bringing these 2 cases up is price. The Vector 100 is targeting $60 (without fans) and the Vector 100 Mini, which is geared for MicroATX, is targeting $45 (without fans). Lian Li Wireless FansLian Li also showed off its new wireless fans, which comes with a battery pack. There’s currently no price on it, but it’s designed to allow its users to “flex,” as Chen put it. It comes with a built-in receiver. The fans and RGB LEDs use up to 12 volts. In terms of battery life, the CEO says that 3 fans with their LEDs on will last for about 20 minutes. Hydroshift 2 Liquid Cooler Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a direct donation or a Patreon contribution!)The Hydroshift 2 Liquid Cooler has a click actuation ring around the cooler, which can be used as a software-less switch for the display and all of that is pre-written to the device. This means that toggling it doesn’t require software, though you could use software. Compared to Lian Li’s previous Hydroshift 1, the radiator size has been reduced to offer more compatibility but Lian Li says it’s tried to improve flow within the cooler. The company also pushed the micro fins closer to the heat source.
    0 Σχόλια 0 Μοιράστηκε
  • Save $600 Off the Alienware Area-51 GeForce RTX 5090 Prebuilt Gaming PC for Memorial Day

    If you're seeking the absolute best of the best in PC gaming performance, look no further. As part of its Memorial Day Sale, Dell has dropped the price of its flagship Alienware Area-51 prebuilt gaming PC, equipped with the Nvidia GeForce RTX 5090 graphics card, for the lowest price I've seen. This particular model normally retails for but a new instant discount drops it to with free shipping. The RTX 5090 is undisputedly the most powerful graphics card on the market and is pretty much impossible to find for under by itself.Memorial Day Deal: Alienware Area-51 RTX 5090 Gaming PCNew ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PCThis Alienware Area-51 gaming PC configuration drops to after a off instant discount. Specs include an Intel Core Ultra 9 285K processor, 32GB of DDR5-6400MHz RAM, and 2TB SSD storage. The Core Ultra 9 285K is Intel's latest flagship CPU and offers stellar workstation and gaming performance. It's not quite the performance uplift we wanted from the i9-14900K, but it's still the best all-around CPU that Intel has on offer. The processor is cooled by a massive 360mm all-in-one liquid cooler, and the system is powered by a 1,500W Platinum power supply.New for 2025: The Alienware Area-51 ChassisDell unveiled the new Alienware Area-51 gaming PC at CES 2025. The chassis looks similar to the 2024 R16 system with aesthetic and cooling redesigns and updated components. The I/O panel is positioned at the top of the case instead of the front, and the tempered glass window now spans the entire side panel instead of just a smaller cutout. As a result, the side panel vents are gone, and instead air intakes are located at the bottom as well as the front of the case. Alienware is now pushing a positive airflow design, which means a less dusty interior. The internal components have been refreshed with a new motherboard, faster RAM, and more powerful power supply to accommodate the new generation of CPUs and GPUs.The RTX 5090 Is the Most Powerful Graphics Card EverThe Nvidia GeForce RTX 5090 has emerged as the most powerful consumer GPU on the market. Although Nvidia has prioritized software updates, AI features, and DLSS 4 technology to improve gameplay performance, the 5090 still boasts an impressive 25%-30% uplift over the RTX 4090 in terms of pure hardware-based raster performance. The 5090 also has moreand fasterVRAM compared to the 4090. This GPU is extremely difficult to find at retail price and is currently selling for -on eBay.Nvidia GeForce RTX 5090 FE Review by Jackie Thomas"The Nvidia GeForce RTX 5090 has officially taken the performance crown from the RTX 4090, but with less force than previous generations. When it comes to traditional non-AI gaming performance, the RTX 5090 provides one of the smallest generational uplifts in recent memory. However, in games that support it, DLSS 4 really does deliver huge performance gains – you just have to make your peace with the fact that 75% of the frames are generated with AI."More Alienware Prebuilt Gaming PC DealsAlienware Aurora R16 Intel Core Ultra 7 265F RTX 5080 Gaming PCat AlienwareAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCNew ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PCAlienware Aurora R16 Intel Core Ultra 7 265F RTX 5070 Gaming PCat AlienwareAlienware Aurora R16 Intel Core Ultra 9 285KF RTX 5070 Gaming PCNew for 2025Alienware Area-51 Intel Core Ultra 7 265 RTX 5080 Gaming PCAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCWhy Should You Trust IGN's Deals Team?IGN's deals team has a combined 30+ years of experience finding the best discounts in gaming, tech, and just about every other category. We don't try to trick our readers into buying things they don't need at prices that aren't worth buying something at. Our ultimate goal is to surface the best possible deals from brands we trust and our editorial team has personal experience with. You can check out our deals standards here for more information on our process, or keep up with the latest deals we find on IGN's Deals account on Twitter.Eric Song is the IGN commerce manager in charge of finding the best gaming and tech deals every day. When Eric isn't hunting for deals for other people at work, he's hunting for deals for himself during his free time.
    #save #off #alienware #area51 #geforce
    Save $600 Off the Alienware Area-51 GeForce RTX 5090 Prebuilt Gaming PC for Memorial Day
    If you're seeking the absolute best of the best in PC gaming performance, look no further. As part of its Memorial Day Sale, Dell has dropped the price of its flagship Alienware Area-51 prebuilt gaming PC, equipped with the Nvidia GeForce RTX 5090 graphics card, for the lowest price I've seen. This particular model normally retails for but a new instant discount drops it to with free shipping. The RTX 5090 is undisputedly the most powerful graphics card on the market and is pretty much impossible to find for under by itself.Memorial Day Deal: Alienware Area-51 RTX 5090 Gaming PCNew ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PCThis Alienware Area-51 gaming PC configuration drops to after a off instant discount. Specs include an Intel Core Ultra 9 285K processor, 32GB of DDR5-6400MHz RAM, and 2TB SSD storage. The Core Ultra 9 285K is Intel's latest flagship CPU and offers stellar workstation and gaming performance. It's not quite the performance uplift we wanted from the i9-14900K, but it's still the best all-around CPU that Intel has on offer. The processor is cooled by a massive 360mm all-in-one liquid cooler, and the system is powered by a 1,500W Platinum power supply.New for 2025: The Alienware Area-51 ChassisDell unveiled the new Alienware Area-51 gaming PC at CES 2025. The chassis looks similar to the 2024 R16 system with aesthetic and cooling redesigns and updated components. The I/O panel is positioned at the top of the case instead of the front, and the tempered glass window now spans the entire side panel instead of just a smaller cutout. As a result, the side panel vents are gone, and instead air intakes are located at the bottom as well as the front of the case. Alienware is now pushing a positive airflow design, which means a less dusty interior. The internal components have been refreshed with a new motherboard, faster RAM, and more powerful power supply to accommodate the new generation of CPUs and GPUs.The RTX 5090 Is the Most Powerful Graphics Card EverThe Nvidia GeForce RTX 5090 has emerged as the most powerful consumer GPU on the market. Although Nvidia has prioritized software updates, AI features, and DLSS 4 technology to improve gameplay performance, the 5090 still boasts an impressive 25%-30% uplift over the RTX 4090 in terms of pure hardware-based raster performance. The 5090 also has moreand fasterVRAM compared to the 4090. This GPU is extremely difficult to find at retail price and is currently selling for -on eBay.Nvidia GeForce RTX 5090 FE Review by Jackie Thomas"The Nvidia GeForce RTX 5090 has officially taken the performance crown from the RTX 4090, but with less force than previous generations. When it comes to traditional non-AI gaming performance, the RTX 5090 provides one of the smallest generational uplifts in recent memory. However, in games that support it, DLSS 4 really does deliver huge performance gains – you just have to make your peace with the fact that 75% of the frames are generated with AI."More Alienware Prebuilt Gaming PC DealsAlienware Aurora R16 Intel Core Ultra 7 265F RTX 5080 Gaming PCat AlienwareAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCNew ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PCAlienware Aurora R16 Intel Core Ultra 7 265F RTX 5070 Gaming PCat AlienwareAlienware Aurora R16 Intel Core Ultra 9 285KF RTX 5070 Gaming PCNew for 2025Alienware Area-51 Intel Core Ultra 7 265 RTX 5080 Gaming PCAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PCWhy Should You Trust IGN's Deals Team?IGN's deals team has a combined 30+ years of experience finding the best discounts in gaming, tech, and just about every other category. We don't try to trick our readers into buying things they don't need at prices that aren't worth buying something at. Our ultimate goal is to surface the best possible deals from brands we trust and our editorial team has personal experience with. You can check out our deals standards here for more information on our process, or keep up with the latest deals we find on IGN's Deals account on Twitter.Eric Song is the IGN commerce manager in charge of finding the best gaming and tech deals every day. When Eric isn't hunting for deals for other people at work, he's hunting for deals for himself during his free time. #save #off #alienware #area51 #geforce
    WWW.IGN.COM
    Save $600 Off the Alienware Area-51 GeForce RTX 5090 Prebuilt Gaming PC for Memorial Day
    If you're seeking the absolute best of the best in PC gaming performance, look no further. As part of its Memorial Day Sale, Dell has dropped the price of its flagship Alienware Area-51 prebuilt gaming PC, equipped with the Nvidia GeForce RTX 5090 graphics card, for the lowest price I've seen. This particular model normally retails for $5,499.99, but a new $600 instant discount drops it to $4,899.99 with free shipping. The RTX 5090 is undisputedly the most powerful graphics card on the market and is pretty much impossible to find for under $3,000 by itself.Memorial Day Deal: Alienware Area-51 RTX 5090 Gaming PCNew ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PC (32GB/2TB)This Alienware Area-51 gaming PC configuration drops to $4,899.99 after a $600 off instant discount. Specs include an Intel Core Ultra 9 285K processor, 32GB of DDR5-6400MHz RAM, and 2TB SSD storage. The Core Ultra 9 285K is Intel's latest flagship CPU and offers stellar workstation and gaming performance. It's not quite the performance uplift we wanted from the i9-14900K, but it's still the best all-around CPU that Intel has on offer. The processor is cooled by a massive 360mm all-in-one liquid cooler, and the system is powered by a 1,500W Platinum power supply.New for 2025: The Alienware Area-51 ChassisDell unveiled the new Alienware Area-51 gaming PC at CES 2025. The chassis looks similar to the 2024 R16 system with aesthetic and cooling redesigns and updated components. The I/O panel is positioned at the top of the case instead of the front, and the tempered glass window now spans the entire side panel instead of just a smaller cutout. As a result, the side panel vents are gone, and instead air intakes are located at the bottom as well as the front of the case. Alienware is now pushing a positive airflow design (more intake than exhaust airflow), which means a less dusty interior. The internal components have been refreshed with a new motherboard, faster RAM, and more powerful power supply to accommodate the new generation of CPUs and GPUs.The RTX 5090 Is the Most Powerful Graphics Card EverThe Nvidia GeForce RTX 5090 has emerged as the most powerful consumer GPU on the market. Although Nvidia has prioritized software updates, AI features, and DLSS 4 technology to improve gameplay performance, the 5090 still boasts an impressive 25%-30% uplift over the RTX 4090 in terms of pure hardware-based raster performance. The 5090 also has more (32GB vs. 24GB) and faster (GDDR7 vs. GDDR6) VRAM compared to the 4090. This GPU is extremely difficult to find at retail price and is currently selling for $3,500-$4,000 on eBay.Nvidia GeForce RTX 5090 FE Review by Jackie Thomas"The Nvidia GeForce RTX 5090 has officially taken the performance crown from the RTX 4090, but with less force than previous generations. When it comes to traditional non-AI gaming performance, the RTX 5090 provides one of the smallest generational uplifts in recent memory. However, in games that support it, DLSS 4 really does deliver huge performance gains – you just have to make your peace with the fact that 75% of the frames are generated with AI."More Alienware Prebuilt Gaming PC DealsAlienware Aurora R16 Intel Core Ultra 7 265F RTX 5080 Gaming PC (16GB/1TB)$2,349.99 at AlienwareAlienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PC (32GB/2TB)New ReleaseAlienware Area-51 Intel Core Ultra 9 285K RTX 5090 Gaming PC (32GB/2TB)Alienware Aurora R16 Intel Core Ultra 7 265F RTX 5070 Gaming PC$1,849.99 at AlienwareAlienware Aurora R16 Intel Core Ultra 9 285KF RTX 5070 Gaming PC (32GB/2TB)New for 2025Alienware Area-51 Intel Core Ultra 7 265 RTX 5080 Gaming PC (32GB/1TB)Alienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PC (64GB/2TB)Alienware Aurora R16 Intel Core Ultra 9 285K RTX 5080 Gaming PC (64GB/4TB)Why Should You Trust IGN's Deals Team?IGN's deals team has a combined 30+ years of experience finding the best discounts in gaming, tech, and just about every other category. We don't try to trick our readers into buying things they don't need at prices that aren't worth buying something at. Our ultimate goal is to surface the best possible deals from brands we trust and our editorial team has personal experience with. You can check out our deals standards here for more information on our process, or keep up with the latest deals we find on IGN's Deals account on Twitter.Eric Song is the IGN commerce manager in charge of finding the best gaming and tech deals every day. When Eric isn't hunting for deals for other people at work, he's hunting for deals for himself during his free time.
    0 Σχόλια 0 Μοιράστηκε
  • Colorful RTX 5080 DOOM Edition, Neptune Liquid-Cooled RTX 5090 & DDR5 Memory, Monster 3200W PSU With 8x 16-Pin Connectors & BTF Connector GPU Pictured

    Colorful has gone all out, showcasing impressive themed RTX 5090/5080 GPUs, monstrous PSUs up to 3200W & the latest BTF designs at Computex.
    Colorful Unveils plethora of Products at Computex, Including Doom-Themed RTX 5080 GPU, 3200W PSU, Liquid-Cooled DDR5 Memory & BTF Designs
    DOOM: The Dark Ages is taking the spotlight on many booths, as that is one game that GPU makers are using as the theme of some of their new limited-edition models.
    Colorful is also making one of those in a brand-new design, which uses an acrylic shroud with a foggy finish that is colored green and houses the Slayer logo in the middle fin. This is a high-end 3-slot design with triple-fan cooling and is going to come in RTX 5080 GPU flavors.

    2 of 9

    Even the heatsink underneath the shroud is colored green, and on the back, you get a full-coverage backplate with a circular cut-out for higher airflow and the Dark Ages cover photo engraved on the entirety of the backplate. The card uses a single 16-pin connector and will be a limited edition model with a premium price point.

    2 of 9

    Colorful is also expanding into the BTF ecosystem with new products that include GPUs, motherboards, and PSUs. An iGame Ultra RTX 5070 Ti GPU was showcased, which uses modular BTF connectors, one with the standard BTF to 16-pin and the other with a BTF to BTF connector. Both connectors are rated at up to 600W and easily swap into place. The 16-pin connector is also angled, making it easier to avoid any unwanted bends in the cable.

    2 of 9

    The BTF PSU also replaces the 24-pin ATX connection and uses a specialized BTF connector that can be connected to a compatible BTF motherboard, such as the one from the iGame Ultra series. It is still an early design for the DIY market, but Colorful is shipping such systems pre-built within the Asian marketplace.
    One of these systems is the iGame Neptune design, which makes use of a full-on aluminum build and houses some impressive components. One of these is the GeForce RTX 5090 Neptune, which is an AIO-cooled design with a 360mm radiator and uses some sleek silver-aluminum and blue hints on the shroud. The system will also feature Neptune-branded DDR5 memory, which runs at really fast speeds and also comes with liquid-cooling, delivering better thermal capabilities than air-cooled designs.

    2 of 9

    For power delivery, Colorful's sister brand has developed a powerful 3200W solution, which is rated at 80 Plus Titanium and makes use of the latest ATX 3.1 / PCIe 5.1 standards.

    2 of 9

    This comes with eight 16-pinpower connectors and is built using the latest components as displayed below:

    And lastly, Colorful is also rolling out two brand-new Mini PCs, including one that will feature AMD's Ryzen AI MAX "Strix Halo" APUs and a smaller "Colorful SMART" solution that makes use of the Ryzen 200 and Ryzen AI 300 APUs.

    2 of 9

    That's all from Colorful, and it goes off to show how big the company really is and how many product lineups they are involved in. You can expect more details, such as pricing, in the coming months, so stay tuned.

    Deal of the Day
    #colorful #rtx #doom #edition #neptune
    Colorful RTX 5080 DOOM Edition, Neptune Liquid-Cooled RTX 5090 & DDR5 Memory, Monster 3200W PSU With 8x 16-Pin Connectors & BTF Connector GPU Pictured
    Colorful has gone all out, showcasing impressive themed RTX 5090/5080 GPUs, monstrous PSUs up to 3200W & the latest BTF designs at Computex. Colorful Unveils plethora of Products at Computex, Including Doom-Themed RTX 5080 GPU, 3200W PSU, Liquid-Cooled DDR5 Memory & BTF Designs DOOM: The Dark Ages is taking the spotlight on many booths, as that is one game that GPU makers are using as the theme of some of their new limited-edition models. Colorful is also making one of those in a brand-new design, which uses an acrylic shroud with a foggy finish that is colored green and houses the Slayer logo in the middle fin. This is a high-end 3-slot design with triple-fan cooling and is going to come in RTX 5080 GPU flavors. 2 of 9 Even the heatsink underneath the shroud is colored green, and on the back, you get a full-coverage backplate with a circular cut-out for higher airflow and the Dark Ages cover photo engraved on the entirety of the backplate. The card uses a single 16-pin connector and will be a limited edition model with a premium price point. 2 of 9 Colorful is also expanding into the BTF ecosystem with new products that include GPUs, motherboards, and PSUs. An iGame Ultra RTX 5070 Ti GPU was showcased, which uses modular BTF connectors, one with the standard BTF to 16-pin and the other with a BTF to BTF connector. Both connectors are rated at up to 600W and easily swap into place. The 16-pin connector is also angled, making it easier to avoid any unwanted bends in the cable. 2 of 9 The BTF PSU also replaces the 24-pin ATX connection and uses a specialized BTF connector that can be connected to a compatible BTF motherboard, such as the one from the iGame Ultra series. It is still an early design for the DIY market, but Colorful is shipping such systems pre-built within the Asian marketplace. One of these systems is the iGame Neptune design, which makes use of a full-on aluminum build and houses some impressive components. One of these is the GeForce RTX 5090 Neptune, which is an AIO-cooled design with a 360mm radiator and uses some sleek silver-aluminum and blue hints on the shroud. The system will also feature Neptune-branded DDR5 memory, which runs at really fast speeds and also comes with liquid-cooling, delivering better thermal capabilities than air-cooled designs. 2 of 9 For power delivery, Colorful's sister brand has developed a powerful 3200W solution, which is rated at 80 Plus Titanium and makes use of the latest ATX 3.1 / PCIe 5.1 standards. 2 of 9 This comes with eight 16-pinpower connectors and is built using the latest components as displayed below: And lastly, Colorful is also rolling out two brand-new Mini PCs, including one that will feature AMD's Ryzen AI MAX "Strix Halo" APUs and a smaller "Colorful SMART" solution that makes use of the Ryzen 200 and Ryzen AI 300 APUs. 2 of 9 That's all from Colorful, and it goes off to show how big the company really is and how many product lineups they are involved in. You can expect more details, such as pricing, in the coming months, so stay tuned. Deal of the Day #colorful #rtx #doom #edition #neptune
    WCCFTECH.COM
    Colorful RTX 5080 DOOM Edition, Neptune Liquid-Cooled RTX 5090 & DDR5 Memory, Monster 3200W PSU With 8x 16-Pin Connectors & BTF Connector GPU Pictured
    Colorful has gone all out, showcasing impressive themed RTX 5090/5080 GPUs, monstrous PSUs up to 3200W & the latest BTF designs at Computex. Colorful Unveils plethora of Products at Computex, Including Doom-Themed RTX 5080 GPU, 3200W PSU, Liquid-Cooled DDR5 Memory & BTF Designs DOOM: The Dark Ages is taking the spotlight on many booths, as that is one game that GPU makers are using as the theme of some of their new limited-edition models. Colorful is also making one of those in a brand-new design, which uses an acrylic shroud with a foggy finish that is colored green and houses the Slayer logo in the middle fin. This is a high-end 3-slot design with triple-fan cooling and is going to come in RTX 5080 GPU flavors. 2 of 9 Even the heatsink underneath the shroud is colored green, and on the back, you get a full-coverage backplate with a circular cut-out for higher airflow and the Dark Ages cover photo engraved on the entirety of the backplate. The card uses a single 16-pin connector and will be a limited edition model with a premium price point. 2 of 9 Colorful is also expanding into the BTF ecosystem with new products that include GPUs, motherboards, and PSUs. An iGame Ultra RTX 5070 Ti GPU was showcased, which uses modular BTF connectors, one with the standard BTF to 16-pin and the other with a BTF to BTF connector. Both connectors are rated at up to 600W and easily swap into place. The 16-pin connector is also angled, making it easier to avoid any unwanted bends in the cable. 2 of 9 The BTF PSU also replaces the 24-pin ATX connection and uses a specialized BTF connector that can be connected to a compatible BTF motherboard, such as the one from the iGame Ultra series. It is still an early design for the DIY market, but Colorful is shipping such systems pre-built within the Asian marketplace. One of these systems is the iGame Neptune design, which makes use of a full-on aluminum build and houses some impressive components. One of these is the GeForce RTX 5090 Neptune, which is an AIO-cooled design with a 360mm radiator and uses some sleek silver-aluminum and blue hints on the shroud. The system will also feature Neptune-branded DDR5 memory, which runs at really fast speeds and also comes with liquid-cooling, delivering better thermal capabilities than air-cooled designs. 2 of 9 For power delivery, Colorful's sister brand has developed a powerful 3200W solution, which is rated at 80 Plus Titanium and makes use of the latest ATX 3.1 / PCIe 5.1 standards. 2 of 9 This comes with eight 16-pin (12V-2x6) power connectors and is built using the latest components as displayed below: And lastly, Colorful is also rolling out two brand-new Mini PCs, including one that will feature AMD's Ryzen AI MAX "Strix Halo" APUs and a smaller "Colorful SMART" solution that makes use of the Ryzen 200 and Ryzen AI 300 APUs. 2 of 9 That's all from Colorful, and it goes off to show how big the company really is and how many product lineups they are involved in. You can expect more details, such as pricing, in the coming months, so stay tuned. Deal of the Day
    0 Σχόλια 0 Μοιράστηκε