• Blue Prince Doesn't Have A Satisfying Ending, But That's The Point

    Warning! We're about to go into deep endgame spoilers for Blue Prince, well beyond rolling the credits by reaching Room 46. Read on at your own risk.I had been playing Blue Prince for more than 100 hours before I felt like I truly understood what the game was really about.The revelation came in the form of a journal entry, secreted away in a safety deposit box, hidden within the sometimes tough-to-access vault of the strange and shifting Mount Holly Manor. Reaching the paper requires solving one of Blue Prince's toughest, most obtuse, and most rewarding puzzles, one you won't even realize exists until you've broken through riddle after riddle and uncovered mystery after mystery. It recontextualizes everything that has come before it, not only the winding and involved test of wits that is the manor itself, but the story that had to be similarly excavated along the way--one of political intrigue and family tragedy, the rising and falling of kingdoms, the stoking of revolution, and the sacrifice necessary to breathe life into ideals.Continue Reading at GameSpot
    #blue #prince #doesn039t #have #satisfying
    Blue Prince Doesn't Have A Satisfying Ending, But That's The Point
    Warning! We're about to go into deep endgame spoilers for Blue Prince, well beyond rolling the credits by reaching Room 46. Read on at your own risk.I had been playing Blue Prince for more than 100 hours before I felt like I truly understood what the game was really about.The revelation came in the form of a journal entry, secreted away in a safety deposit box, hidden within the sometimes tough-to-access vault of the strange and shifting Mount Holly Manor. Reaching the paper requires solving one of Blue Prince's toughest, most obtuse, and most rewarding puzzles, one you won't even realize exists until you've broken through riddle after riddle and uncovered mystery after mystery. It recontextualizes everything that has come before it, not only the winding and involved test of wits that is the manor itself, but the story that had to be similarly excavated along the way--one of political intrigue and family tragedy, the rising and falling of kingdoms, the stoking of revolution, and the sacrifice necessary to breathe life into ideals.Continue Reading at GameSpot #blue #prince #doesn039t #have #satisfying
    WWW.GAMESPOT.COM
    Blue Prince Doesn't Have A Satisfying Ending, But That's The Point
    Warning! We're about to go into deep endgame spoilers for Blue Prince, well beyond rolling the credits by reaching Room 46. Read on at your own risk.I had been playing Blue Prince for more than 100 hours before I felt like I truly understood what the game was really about.The revelation came in the form of a journal entry, secreted away in a safety deposit box, hidden within the sometimes tough-to-access vault of the strange and shifting Mount Holly Manor. Reaching the paper requires solving one of Blue Prince's toughest, most obtuse, and most rewarding puzzles, one you won't even realize exists until you've broken through riddle after riddle and uncovered mystery after mystery. It recontextualizes everything that has come before it, not only the winding and involved test of wits that is the manor itself, but the story that had to be similarly excavated along the way--one of political intrigue and family tragedy, the rising and falling of kingdoms, the stoking of revolution, and the sacrifice necessary to breathe life into ideals.Continue Reading at GameSpot
    0 Comentários 0 Compartilhamentos
  • So, I guess if you’re wandering around Arrakis in Dune Awakening, you might be wondering where to find aluminum. Yeah, that’s a thing. It’s not like there’s much else to do on this barren planet, right? You log in, look around, and think, “Great, now I need to hunt for aluminum.” It’s one of those resources that everyone talks about, but honestly, it feels like a hassle just to gather it.

    You’ll probably want to check out some of the caves or maybe dig around in the sandy dunes. Apparently, there are a few spots that are known for having aluminum deposits. But, like, do you really want to spend your time doing that? I mean, it could be fun for a minute, but it’s mostly just running around in the sun, trying not to get eaten by giant sandworms or whatever.

    Also, it’s not like there are guides everywhere, so you’ll have to rely on word of mouth or whatever you can find on the internet. But who has the energy for that? You can end up wandering aimlessly, and let’s be real, that’s not the most exciting way to spend your game time.

    You might hear some players say they found aluminum near the Spice fields, but how reliable is that information? It’s like a game of telephone. One person sees something shiny, tells everyone, and then it turns out to be a rock or something. Classic.

    And when you finally do find aluminum, what’s next? You just sit there wondering what to do with it. Maybe you can craft some gear or trade it, but honestly, by that time, you’re probably just ready to log off and take a nap. I mean, who needs the stress of resource gathering on a planet like Arrakis?

    So, if you’re still interested in hunting for aluminum on Arrakis, good luck, I guess. Just don’t expect it to be the highlight of your gaming experience. More like a chore you’re obligated to do, rather than something that’ll get your adrenaline pumping.

    #DuneAwakening #Arrakis #AluminumHunt #GamingLife #MMORPG
    So, I guess if you’re wandering around Arrakis in Dune Awakening, you might be wondering where to find aluminum. Yeah, that’s a thing. It’s not like there’s much else to do on this barren planet, right? You log in, look around, and think, “Great, now I need to hunt for aluminum.” It’s one of those resources that everyone talks about, but honestly, it feels like a hassle just to gather it. You’ll probably want to check out some of the caves or maybe dig around in the sandy dunes. Apparently, there are a few spots that are known for having aluminum deposits. But, like, do you really want to spend your time doing that? I mean, it could be fun for a minute, but it’s mostly just running around in the sun, trying not to get eaten by giant sandworms or whatever. Also, it’s not like there are guides everywhere, so you’ll have to rely on word of mouth or whatever you can find on the internet. But who has the energy for that? You can end up wandering aimlessly, and let’s be real, that’s not the most exciting way to spend your game time. You might hear some players say they found aluminum near the Spice fields, but how reliable is that information? It’s like a game of telephone. One person sees something shiny, tells everyone, and then it turns out to be a rock or something. Classic. And when you finally do find aluminum, what’s next? You just sit there wondering what to do with it. Maybe you can craft some gear or trade it, but honestly, by that time, you’re probably just ready to log off and take a nap. I mean, who needs the stress of resource gathering on a planet like Arrakis? So, if you’re still interested in hunting for aluminum on Arrakis, good luck, I guess. Just don’t expect it to be the highlight of your gaming experience. More like a chore you’re obligated to do, rather than something that’ll get your adrenaline pumping. #DuneAwakening #Arrakis #AluminumHunt #GamingLife #MMORPG
    Où trouver de l’aluminium sur Arrakis ? | Dune Awakening
    ActuGaming.net Où trouver de l’aluminium sur Arrakis ? | Dune Awakening Dune Awakening est un MMORPG axé sur la survie prenant place sur Arrakis, une planète […] L'article Où trouver de l’aluminium sur Arrakis ? | Dune Awakening es
    Like
    Love
    Wow
    Sad
    Angry
    592
    1 Comentários 0 Compartilhamentos
  • Aspora gets $50M from Sequioa to build remittance and banking solutions for Indian diaspora

    India has been one of the top recipients of remittances in the world for more than a decade. Inward remittances jumped from billion in 2010-11 to billion in 2023-24, according to data from the country’s central bank. The bank projects that figure will reach billion in 2029.
    This means there is an increasing market for digitalized banking experiences for non-resident Indians, ranging from remittances to investing in different assets back home.
    Asporais trying to build a verticalized financial experience for the Indian diaspora by keeping convenience at the center. While a lot of financial products are in its future roadmap, the company currently focuses largely on remittances.
    “While multiple financial products for non-resident Indians exist, they don’t know about them because there is no digital journey for them. They possibly use the same banking app as residents, which makes it harder for them to discover products catered towards them,” Garg said.
    In the last year, the company has grown the volume of remittances by 6x — from million to billion in yearly volume processed.
    With this growth, the company has attracted a lot of investor interest. It raised million in Series A funding last December — which was previously unreported — led by Sequoia with participation from Greylock, Y Combinator, Hummingbird Ventures, and Global Founders Capital. The round pegged the company’s valuation at million. In the four months following, the company tripled its transaction volume, prompting investors to put in more money.
    The company announced today it has raised million in Series B funding, co-led by Sequoia and Greylock, with Hummingbird, Quantum Light Ventures, and Y Combinator also contributing to the round. The startup said this round values the company at million. The startup has raised over million in funding to date.

    Techcrunch event

    + on your TechCrunch All Stage pass
    Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections.

    + on your TechCrunch All Stage pass
    Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections.

    Boston, MA
    |
    July 15

    REGISTER NOW

    After pivoting from being Pipe.com for India, the company started by offering remittance for NRIs in the U.K. in 2023 and has expanded its presence in other markets, including Europe and the United Arab Emirates. It charges a flat fee for money transfer and offers a competitive rate. Now it also allows customers to invest in mutual funds in India. The startup markets its exchange rates as “Google rate” as customers often search for currency conversion rates, even though they may not reflect live rates.
    The startup is also set to launch in the U.S., one of the biggest remittance corridors to India, next month. Plus, it plans to open up shop in Canada, Singapore, and Australia by the fourth quarter of this year.
    Garg, who grew up in the UAE, said that remittances are just the start, and the company wants to build out more financial tools for NRIs.
    “We want to use remittances as a wedge and build all the financial solutions that the diaspora needs, including banking, investing, insurance, lending in the home country, and products that help them take care of their parents,” he told TechCrunch.
    He added that a large chunk of money that NRIs send home is for wealth creation rather than family sustenance. The startup said that 80% of its users are sending money to their own accounts back home.
    In the next few months, the company is launching a few products to offer more services. This month, it plans to launch a bill payment platform to let users pay for services like rent and utilities. Next month, it plans to launch fixed deposit accounts for non-resident Indians that allow them to park money in foreign currency. By the end of the year, it plans to launch a full-stack banking account for NRIs that typically takes days for users to open. While these accounts can help the diaspora maintain their tax status in India, a lot of people use a family member’s account because of the cumbersome process, and Aspora wants to simplify this.
    Apart from banking, the company also plans to launch a product that would help NRIs take care of their parents back home by offering regular medical checkups, emergency care coverage, and concierge services for other assistance.
    Besides global competitors like Remittly and Wise, the company also has India-based rivals like Abound, which was spun off from Times Internet.
    Sequoia’s Luciana Lixandru is confident that Aspora’s execution speed and verticalized solution will give it an edge.
    “Speed of execution, for me, is one of the main indicators in the early days of the future success of a company,” she told TechCrunch over a call. “Aspora moves fast, but it is also very deliberate in building corridor by corridor, which is very important in financial services.”
    #aspora #gets #50m #sequioa #build
    Aspora gets $50M from Sequioa to build remittance and banking solutions for Indian diaspora
    India has been one of the top recipients of remittances in the world for more than a decade. Inward remittances jumped from billion in 2010-11 to billion in 2023-24, according to data from the country’s central bank. The bank projects that figure will reach billion in 2029. This means there is an increasing market for digitalized banking experiences for non-resident Indians, ranging from remittances to investing in different assets back home. Asporais trying to build a verticalized financial experience for the Indian diaspora by keeping convenience at the center. While a lot of financial products are in its future roadmap, the company currently focuses largely on remittances. “While multiple financial products for non-resident Indians exist, they don’t know about them because there is no digital journey for them. They possibly use the same banking app as residents, which makes it harder for them to discover products catered towards them,” Garg said. In the last year, the company has grown the volume of remittances by 6x — from million to billion in yearly volume processed. With this growth, the company has attracted a lot of investor interest. It raised million in Series A funding last December — which was previously unreported — led by Sequoia with participation from Greylock, Y Combinator, Hummingbird Ventures, and Global Founders Capital. The round pegged the company’s valuation at million. In the four months following, the company tripled its transaction volume, prompting investors to put in more money. The company announced today it has raised million in Series B funding, co-led by Sequoia and Greylock, with Hummingbird, Quantum Light Ventures, and Y Combinator also contributing to the round. The startup said this round values the company at million. The startup has raised over million in funding to date. Techcrunch event + on your TechCrunch All Stage pass Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections. + on your TechCrunch All Stage pass Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections. Boston, MA | July 15 REGISTER NOW After pivoting from being Pipe.com for India, the company started by offering remittance for NRIs in the U.K. in 2023 and has expanded its presence in other markets, including Europe and the United Arab Emirates. It charges a flat fee for money transfer and offers a competitive rate. Now it also allows customers to invest in mutual funds in India. The startup markets its exchange rates as “Google rate” as customers often search for currency conversion rates, even though they may not reflect live rates. The startup is also set to launch in the U.S., one of the biggest remittance corridors to India, next month. Plus, it plans to open up shop in Canada, Singapore, and Australia by the fourth quarter of this year. Garg, who grew up in the UAE, said that remittances are just the start, and the company wants to build out more financial tools for NRIs. “We want to use remittances as a wedge and build all the financial solutions that the diaspora needs, including banking, investing, insurance, lending in the home country, and products that help them take care of their parents,” he told TechCrunch. He added that a large chunk of money that NRIs send home is for wealth creation rather than family sustenance. The startup said that 80% of its users are sending money to their own accounts back home. In the next few months, the company is launching a few products to offer more services. This month, it plans to launch a bill payment platform to let users pay for services like rent and utilities. Next month, it plans to launch fixed deposit accounts for non-resident Indians that allow them to park money in foreign currency. By the end of the year, it plans to launch a full-stack banking account for NRIs that typically takes days for users to open. While these accounts can help the diaspora maintain their tax status in India, a lot of people use a family member’s account because of the cumbersome process, and Aspora wants to simplify this. Apart from banking, the company also plans to launch a product that would help NRIs take care of their parents back home by offering regular medical checkups, emergency care coverage, and concierge services for other assistance. Besides global competitors like Remittly and Wise, the company also has India-based rivals like Abound, which was spun off from Times Internet. Sequoia’s Luciana Lixandru is confident that Aspora’s execution speed and verticalized solution will give it an edge. “Speed of execution, for me, is one of the main indicators in the early days of the future success of a company,” she told TechCrunch over a call. “Aspora moves fast, but it is also very deliberate in building corridor by corridor, which is very important in financial services.” #aspora #gets #50m #sequioa #build
    TECHCRUNCH.COM
    Aspora gets $50M from Sequioa to build remittance and banking solutions for Indian diaspora
    India has been one of the top recipients of remittances in the world for more than a decade. Inward remittances jumped from $55.6 billion in 2010-11 to $118.7 billion in 2023-24, according to data from the country’s central bank. The bank projects that figure will reach $160 billion in 2029. This means there is an increasing market for digitalized banking experiences for non-resident Indians(NRIs), ranging from remittances to investing in different assets back home. Aspora (formerly Vance) is trying to build a verticalized financial experience for the Indian diaspora by keeping convenience at the center. While a lot of financial products are in its future roadmap, the company currently focuses largely on remittances. “While multiple financial products for non-resident Indians exist, they don’t know about them because there is no digital journey for them. They possibly use the same banking app as residents, which makes it harder for them to discover products catered towards them,” Garg said. In the last year, the company has grown the volume of remittances by 6x — from $400 million to $2 billion in yearly volume processed. With this growth, the company has attracted a lot of investor interest. It raised $35 million in Series A funding last December — which was previously unreported — led by Sequoia with participation from Greylock, Y Combinator, Hummingbird Ventures, and Global Founders Capital. The round pegged the company’s valuation at $150 million. In the four months following, the company tripled its transaction volume, prompting investors to put in more money. The company announced today it has raised $50 million in Series B funding, co-led by Sequoia and Greylock, with Hummingbird, Quantum Light Ventures, and Y Combinator also contributing to the round. The startup said this round values the company at $500 million. The startup has raised over $99 million in funding to date. Techcrunch event Save $200+ on your TechCrunch All Stage pass Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections. Save $200+ on your TechCrunch All Stage pass Build smarter. Scale faster. Connect deeper. Join visionaries from Precursor Ventures, NEA, Index Ventures, Underscore VC, and beyond for a day packed with strategies, workshops, and meaningful connections. Boston, MA | July 15 REGISTER NOW After pivoting from being Pipe.com for India, the company started by offering remittance for NRIs in the U.K. in 2023 and has expanded its presence in other markets, including Europe and the United Arab Emirates. It charges a flat fee for money transfer and offers a competitive rate. Now it also allows customers to invest in mutual funds in India. The startup markets its exchange rates as “Google rate” as customers often search for currency conversion rates, even though they may not reflect live rates. The startup is also set to launch in the U.S., one of the biggest remittance corridors to India, next month. Plus, it plans to open up shop in Canada, Singapore, and Australia by the fourth quarter of this year. Garg, who grew up in the UAE, said that remittances are just the start, and the company wants to build out more financial tools for NRIs. “We want to use remittances as a wedge and build all the financial solutions that the diaspora needs, including banking, investing, insurance, lending in the home country, and products that help them take care of their parents,” he told TechCrunch. He added that a large chunk of money that NRIs send home is for wealth creation rather than family sustenance. The startup said that 80% of its users are sending money to their own accounts back home. In the next few months, the company is launching a few products to offer more services. This month, it plans to launch a bill payment platform to let users pay for services like rent and utilities. Next month, it plans to launch fixed deposit accounts for non-resident Indians that allow them to park money in foreign currency. By the end of the year, it plans to launch a full-stack banking account for NRIs that typically takes days for users to open. While these accounts can help the diaspora maintain their tax status in India, a lot of people use a family member’s account because of the cumbersome process, and Aspora wants to simplify this. Apart from banking, the company also plans to launch a product that would help NRIs take care of their parents back home by offering regular medical checkups, emergency care coverage, and concierge services for other assistance. Besides global competitors like Remittly and Wise, the company also has India-based rivals like Abound, which was spun off from Times Internet. Sequoia’s Luciana Lixandru is confident that Aspora’s execution speed and verticalized solution will give it an edge. “Speed of execution, for me, is one of the main indicators in the early days of the future success of a company,” she told TechCrunch over a call. “Aspora moves fast, but it is also very deliberate in building corridor by corridor, which is very important in financial services.”
    Like
    Love
    Wow
    Sad
    Angry
    514
    2 Comentários 0 Compartilhamentos
  • UMass and MIT Test Cold Spray 3D Printing to Repair Aging Massachusetts Bridge

    Researchers from the US-based University of Massachusetts Amherst, in collaboration with the Massachusetts Institute of TechnologyDepartment of Mechanical Engineering, have applied cold spray to repair the deteriorating “Brown Bridge” in Great Barrington, built in 1949. The project marks the first known use of this method on bridge infrastructure and aims to evaluate its effectiveness as a faster, more cost-effective, and less disruptive alternative to conventional repair techniques.
    “Now that we’ve completed this proof-of-concept repair, we see a clear path to a solution that is much faster, less costly, easier, and less invasive,” said Simos Gerasimidis, associate professor of civil and environmental engineering at the University of Massachusetts Amherst. “To our knowledge, this is a first. Of course, there is some R&D that needs to be developed, but this is a huge milestone to that,” he added.
    The pilot project is also a collaboration with the Massachusetts Department of Transportation, the Massachusetts Technology Collaborative, the U.S. Department of Transportation, and the Federal Highway Administration. It was supported by the Massachusetts Manufacturing Innovation Initiative, which provided essential equipment for the demonstration.
    Members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis. Photo via UMass Amherst.
    Tackling America’s Bridge Crisis with Cold Spray Technology
    Nearly half of the bridges across the United States are in “fair” condition, while 6.8% are classified as “poor,” according to the 2025 Report Card for America’s Infrastructure. In Massachusetts, about 9% of the state’s 5,295 bridges are considered structurally deficient. The costs of restoring this infrastructure are projected to exceed billion—well beyond current funding levels. 
    The cold spray method consists of propelling metal powder particles at high velocity onto the beam’s surface. Successive applications build up additional layers, helping restore its thickness and structural integrity. This method has successfully been used to repair large structures such as submarines, airplanes, and ships, but this marks the first instance of its application to a bridge.
    One of cold spray’s key advantages is its ability to be deployed with minimal traffic disruption.  “Every time you do repairs on a bridge you have to block traffic, you have to make traffic controls for substantial amounts of time,” explained Gerasimidis. “This will allow us toon this actual bridge while cars are going.”
    To enhance precision, the research team integrated 3D LiDAR scanning technology into the process. Unlike visual inspections, which can be subjective and time-consuming, LiDAR creates high-resolution digital models that pinpoint areas of corrosion. This allows teams to develop targeted repair plans and deposit materials only where needed—reducing waste and potentially extending a bridge’s lifespan.
    Next steps: Testing Cold-Sprayed Repairs
    The bridge is scheduled for demolition in the coming years. When that happens, researchers will retrieve the repaired sections for further analysis. They plan to assess the durability, corrosion resistance, and mechanical performance of the cold-sprayed steel in real-world conditions, comparing it to results from laboratory tests.
    “This is a tremendous collaboration where cutting-edge technology is brought to address a critical need for infrastructure in the commonwealth and across the United States,” said John Hart, Class of 1922 Professor in the Department of Mechanical Engineering at MIT. “I think we’re just at the beginning of a digital transformation of bridge inspection, repair and maintenance, among many other important use cases.”
    3D Printing for Infrastructure Repairs
    Beyond cold spray techniques, other innovative 3D printing methods are emerging to address construction repair challenges. For example, researchers at University College Londonhave developed an asphalt 3D printer specifically designed to repair road cracks and potholes. “The material properties of 3D printed asphalt are tunable, and combined with the flexibility and efficiency of the printing platform, this technique offers a compelling new design approach to the maintenance of infrastructure,” the UCL team explained.
    Similarly, in 2018, Cintec, a Wales-based international structural engineering firm, contributed to restoring the historic Government building known as the Red House in the Republic of Trinidad and Tobago. This project, managed by Cintec’s North American branch, marked the first use of additive manufacturing within sacrificial structures. It also featured the installation of what are claimed to be the longest reinforcement anchors ever inserted into a structure—measuring an impressive 36.52 meters.
    Join our Additive Manufacturing Advantageevent on July 10th, where AM leaders from Aerospace, Space, and Defense come together to share mission-critical insights. Online and free to attend.Secure your spot now.
    Who won the2024 3D Printing Industry Awards?
    Subscribe to the 3D Printing Industry newsletterto keep up with the latest 3D printing news.
    You can also follow us onLinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content.
    Featured image shows members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis. Photo via UMass Amherst.
    #umass #mit #test #cold #spray
    UMass and MIT Test Cold Spray 3D Printing to Repair Aging Massachusetts Bridge
    Researchers from the US-based University of Massachusetts Amherst, in collaboration with the Massachusetts Institute of TechnologyDepartment of Mechanical Engineering, have applied cold spray to repair the deteriorating “Brown Bridge” in Great Barrington, built in 1949. The project marks the first known use of this method on bridge infrastructure and aims to evaluate its effectiveness as a faster, more cost-effective, and less disruptive alternative to conventional repair techniques. “Now that we’ve completed this proof-of-concept repair, we see a clear path to a solution that is much faster, less costly, easier, and less invasive,” said Simos Gerasimidis, associate professor of civil and environmental engineering at the University of Massachusetts Amherst. “To our knowledge, this is a first. Of course, there is some R&D that needs to be developed, but this is a huge milestone to that,” he added. The pilot project is also a collaboration with the Massachusetts Department of Transportation, the Massachusetts Technology Collaborative, the U.S. Department of Transportation, and the Federal Highway Administration. It was supported by the Massachusetts Manufacturing Innovation Initiative, which provided essential equipment for the demonstration. Members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis. Photo via UMass Amherst. Tackling America’s Bridge Crisis with Cold Spray Technology Nearly half of the bridges across the United States are in “fair” condition, while 6.8% are classified as “poor,” according to the 2025 Report Card for America’s Infrastructure. In Massachusetts, about 9% of the state’s 5,295 bridges are considered structurally deficient. The costs of restoring this infrastructure are projected to exceed billion—well beyond current funding levels.  The cold spray method consists of propelling metal powder particles at high velocity onto the beam’s surface. Successive applications build up additional layers, helping restore its thickness and structural integrity. This method has successfully been used to repair large structures such as submarines, airplanes, and ships, but this marks the first instance of its application to a bridge. One of cold spray’s key advantages is its ability to be deployed with minimal traffic disruption.  “Every time you do repairs on a bridge you have to block traffic, you have to make traffic controls for substantial amounts of time,” explained Gerasimidis. “This will allow us toon this actual bridge while cars are going.” To enhance precision, the research team integrated 3D LiDAR scanning technology into the process. Unlike visual inspections, which can be subjective and time-consuming, LiDAR creates high-resolution digital models that pinpoint areas of corrosion. This allows teams to develop targeted repair plans and deposit materials only where needed—reducing waste and potentially extending a bridge’s lifespan. Next steps: Testing Cold-Sprayed Repairs The bridge is scheduled for demolition in the coming years. When that happens, researchers will retrieve the repaired sections for further analysis. They plan to assess the durability, corrosion resistance, and mechanical performance of the cold-sprayed steel in real-world conditions, comparing it to results from laboratory tests. “This is a tremendous collaboration where cutting-edge technology is brought to address a critical need for infrastructure in the commonwealth and across the United States,” said John Hart, Class of 1922 Professor in the Department of Mechanical Engineering at MIT. “I think we’re just at the beginning of a digital transformation of bridge inspection, repair and maintenance, among many other important use cases.” 3D Printing for Infrastructure Repairs Beyond cold spray techniques, other innovative 3D printing methods are emerging to address construction repair challenges. For example, researchers at University College Londonhave developed an asphalt 3D printer specifically designed to repair road cracks and potholes. “The material properties of 3D printed asphalt are tunable, and combined with the flexibility and efficiency of the printing platform, this technique offers a compelling new design approach to the maintenance of infrastructure,” the UCL team explained. Similarly, in 2018, Cintec, a Wales-based international structural engineering firm, contributed to restoring the historic Government building known as the Red House in the Republic of Trinidad and Tobago. This project, managed by Cintec’s North American branch, marked the first use of additive manufacturing within sacrificial structures. It also featured the installation of what are claimed to be the longest reinforcement anchors ever inserted into a structure—measuring an impressive 36.52 meters. Join our Additive Manufacturing Advantageevent on July 10th, where AM leaders from Aerospace, Space, and Defense come together to share mission-critical insights. Online and free to attend.Secure your spot now. Who won the2024 3D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletterto keep up with the latest 3D printing news. You can also follow us onLinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content. Featured image shows members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis. Photo via UMass Amherst. #umass #mit #test #cold #spray
    3DPRINTINGINDUSTRY.COM
    UMass and MIT Test Cold Spray 3D Printing to Repair Aging Massachusetts Bridge
    Researchers from the US-based University of Massachusetts Amherst (UMass), in collaboration with the Massachusetts Institute of Technology (MIT) Department of Mechanical Engineering, have applied cold spray to repair the deteriorating “Brown Bridge” in Great Barrington, built in 1949. The project marks the first known use of this method on bridge infrastructure and aims to evaluate its effectiveness as a faster, more cost-effective, and less disruptive alternative to conventional repair techniques. “Now that we’ve completed this proof-of-concept repair, we see a clear path to a solution that is much faster, less costly, easier, and less invasive,” said Simos Gerasimidis, associate professor of civil and environmental engineering at the University of Massachusetts Amherst. “To our knowledge, this is a first. Of course, there is some R&D that needs to be developed, but this is a huge milestone to that,” he added. The pilot project is also a collaboration with the Massachusetts Department of Transportation (MassDOT), the Massachusetts Technology Collaborative (MassTech), the U.S. Department of Transportation, and the Federal Highway Administration. It was supported by the Massachusetts Manufacturing Innovation Initiative, which provided essential equipment for the demonstration. Members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis (left, standing). Photo via UMass Amherst. Tackling America’s Bridge Crisis with Cold Spray Technology Nearly half of the bridges across the United States are in “fair” condition, while 6.8% are classified as “poor,” according to the 2025 Report Card for America’s Infrastructure. In Massachusetts, about 9% of the state’s 5,295 bridges are considered structurally deficient. The costs of restoring this infrastructure are projected to exceed $190 billion—well beyond current funding levels.  The cold spray method consists of propelling metal powder particles at high velocity onto the beam’s surface. Successive applications build up additional layers, helping restore its thickness and structural integrity. This method has successfully been used to repair large structures such as submarines, airplanes, and ships, but this marks the first instance of its application to a bridge. One of cold spray’s key advantages is its ability to be deployed with minimal traffic disruption.  “Every time you do repairs on a bridge you have to block traffic, you have to make traffic controls for substantial amounts of time,” explained Gerasimidis. “This will allow us to [apply the technique] on this actual bridge while cars are going [across].” To enhance precision, the research team integrated 3D LiDAR scanning technology into the process. Unlike visual inspections, which can be subjective and time-consuming, LiDAR creates high-resolution digital models that pinpoint areas of corrosion. This allows teams to develop targeted repair plans and deposit materials only where needed—reducing waste and potentially extending a bridge’s lifespan. Next steps: Testing Cold-Sprayed Repairs The bridge is scheduled for demolition in the coming years. When that happens, researchers will retrieve the repaired sections for further analysis. They plan to assess the durability, corrosion resistance, and mechanical performance of the cold-sprayed steel in real-world conditions, comparing it to results from laboratory tests. “This is a tremendous collaboration where cutting-edge technology is brought to address a critical need for infrastructure in the commonwealth and across the United States,” said John Hart, Class of 1922 Professor in the Department of Mechanical Engineering at MIT. “I think we’re just at the beginning of a digital transformation of bridge inspection, repair and maintenance, among many other important use cases.” 3D Printing for Infrastructure Repairs Beyond cold spray techniques, other innovative 3D printing methods are emerging to address construction repair challenges. For example, researchers at University College London (UCL) have developed an asphalt 3D printer specifically designed to repair road cracks and potholes. “The material properties of 3D printed asphalt are tunable, and combined with the flexibility and efficiency of the printing platform, this technique offers a compelling new design approach to the maintenance of infrastructure,” the UCL team explained. Similarly, in 2018, Cintec, a Wales-based international structural engineering firm, contributed to restoring the historic Government building known as the Red House in the Republic of Trinidad and Tobago. This project, managed by Cintec’s North American branch, marked the first use of additive manufacturing within sacrificial structures. It also featured the installation of what are claimed to be the longest reinforcement anchors ever inserted into a structure—measuring an impressive 36.52 meters. Join our Additive Manufacturing Advantage (AMAA) event on July 10th, where AM leaders from Aerospace, Space, and Defense come together to share mission-critical insights. Online and free to attend.Secure your spot now. Who won the2024 3D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletterto keep up with the latest 3D printing news. You can also follow us onLinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content. Featured image shows members of the UMass Amherst and MIT Department of Mechanical Engineering research team, led by Simos Gerasimidis (left, standing). Photo via UMass Amherst.
    0 Comentários 0 Compartilhamentos
  • Decades ago, concrete overtook steel as the predominant structural material for towers worldwide—the Skyscraper Museum’s new exhibition examines why and how

    “Is that concrete all around, or is it in my head?” asked Ian Hunter in “All the Young Dudes,” the song David Bowie wrote for Mott the Hoople in 1972. Concrete is all around us, and we haven’t quite wrapped our heads around it. It’s one of the indispensable materials of modernity; as we try to decarbonize the built environment, it’s part of the problem, and innovations in its composition may become part of the solution. Understanding its history more clearly, the Skyscraper Museum’s new exhibition in Manhattan implies, just might help us employ it better.

    Concrete is “the second most used substance in the world, after water,” the museum’s founder/director/curator Carol Willis told AN during a recent visit. For plasticity, versatility, and compressive strength, reinforced concrete is hard to beat, though its performance is more problematic when assessed by the metric of embodied and operational carbon, a consideration the exhibition acknowledges up front. In tall construction, concrete has become nearly hegemonic, yet its central role, contend Willis and co-curator Thomas Leslie, formerly of Foster + Partners and now a professor at the University of Illinois, Urbana-Champaign, is underrecognized by the public and by mainstream architectural history. The current exhibition aims to change that perception.
    The Skyscraper Museum in Lower Manhattan features an exhibition, The Modern Concrete Skyscraper, which examines the history of material choices in building tall towers.The Modern Concrete Skyscraper examines the history of tall towers’ structural material choices, describing a transition from the early dominance of steel frames to the contemporary condition, in which most large buildings rely on concrete. This change did not happen instantly or for any single reason but through a combination of technical and economic factors, including innovations by various specialists, well-recognized and otherwise; the availability of high-quality limestone deposits near Chicago; and the differential development of materials industries in nations whose architecture grew prominent in recent decades. As supertalls reach ever higher—in the global race for official height rankings by the Council on Tall Buildings and Urban Habitatand national, corporate, or professional bragging rights—concrete’s dominance may not be permanent in that sector, given the challenge of pumping the material beyond a certain height.For the moment, however, concrete is ahead of its chief competitors, steel andtimber. Regardless of possible promotional inferences, Willis said, “we did not work with the industry in any way for this exhibition.”

    “The invention of steel and the grid of steel and the skeleton frame is only the first chapter of the history of the skyscraper,” Willis explained. “The second chapter, and the one that we’re in now, is concrete. Surprisingly, no one had ever told that story of the skyscraper today with a continuous narrative.” The exhibition traces the use of concrete back to the ancient Roman combination of aggregate and pozzolana—the chemical formula for which was “largely lost with the fall of the Roman Empire,” though some Byzantine and medieval structures approximated it. From there, the show explores comparable materials’ revival in 18th-century England, the patenting of Portland cement by Leeds builder Joseph Aspdin in 1824, the proof-of-concept concrete house by François Coignet in 1856, and the pivotal development of rebar in the mid-19th century, with overdue attention to Ernest Ransome’s 1903 Ingalls Building in Cincinnati, then the world’s tallest concrete building at 15 stories and arguably the first concrete skyscraper.
    The exhibition includes a timeline that depicts concrete’s origins in Rome to its contemporary use in skyscraper construction.Baker’s lectures, Willis reported, sometimes pose a deceptively simple question: “‘What is a skyscraper?’ In 1974, when the World Trade Center and Sears Tower are just finished, you would say it’s a very tall building that is built of steel, an office building in North America. But if you ask that same question today, the answer is: It’s a building that is mixed-use, constructed of concrete, andin Asia or the Middle East.” The exhibition organizes the history of concrete towers by eras of engineering innovation, devoting special attention to the 19th- and early-20th-century “patent era” of Claude Allen Porter Turnerand Henry Chandlee Turner, Ransome, and François Hennebique. In the postwar era, “concrete comes out onto the surfaceboth a structural material and aesthetic.” Brutalism, perhaps to some observers’ surprise, “does not figure very large in high-rise design,” Willis said, except for Paul Rudolph’s Tracey Towers in the Bronx. The exhibition, however, devotes considerable attention to the work of Pier Luigi Nervi, Bertrand Goldberg, and SOM’s Fazlur Khan, pioneer of the structural tube system in the 1960s and 1970s—followed by the postmodernist 1980s, when concrete could express either engineering values or ornamentation.
    The exhibition highlights a number of concrete towers, including Paul Rudolph’s Tracey Towers in the Bronx.“In the ’90s, there were material advances in engineering analysis and computerization that helped to predict performance, and so buildings can get taller and taller,” Willis said. The current era, if one looks to CTBUH rankings, is dominated by the supertalls seen in Dubai, Shanghai, and Kuala Lumpur, after the Petronas Towers“took the title of world’s tallest building from North America for the first time and traumatized everybody about that.” The previous record holder, Chicago’s SearsTower, comprised steel structural tubes on concrete caissons; with Petronas, headquarters of Malaysia’s national petroleum company of that name, a strong concrete industry was represented but a strong national steel industry was lacking, and as Willis frequently says, form follows finances. In any event, by the ’90s concrete was already becoming the standard material for supertalls, particularly on soft-soiled sites like Shanghai, where its water resistance and compressive strength are well suited to foundation construction. Its plasticity is also well suited to complex forms like the triangular Burj, Kuala Lumpur’s Merdeka 118, andthe even taller Jeddah Tower, designed to “confuse the wind,” shed vortices, and manage wind forces. Posing the same question Louis Kahn asked about the intentions of a brick, Willis said, with concrete “the answer is: anything you want.”

    The exhibition is front-loaded with scholarly material, presenting eight succinct yet informative wall texts on the timeline of concrete construction. The explanatory material is accompanied by ample photographs as well as structural models on loan from SOM, Pelli Clarke & Partners, and other firms. Some materials are repurposed from the museum’s previous shows, particularly Supertall!and Sky High and the Logic of Luxury. The models allow close examination of the Burj Khalifa, Petronas Towers, Jin Mao Tower, Merdeka 118, and others, including two unbuilt Chicago projects that would have exceeded 2,000 feet: the Miglin-Beitler Skyneedleand 7 South Dearborn. The Burj, Willis noted, was all structure and no facade for a time: When its curtain-wall manufacturer, Schmidlin, went bankrupt in 2006, it “ended up going to 100 stories without having a stitch of glass on it,” temporarily becoming a “1:1 scale model of the structural system up to 100 stories.” Its prominence justifies its appearance here in two models, including one from RWDI’s wind-tunnel studies.
    Eero Saarinen’s only skyscraper, built for CBS in 1965 and also known as “Black Rock,” under construction in New York City.The exhibition opened in March, with plans to stay up at least through October, with accompanying lectures and panels to be announced on the museum’s website. Though the exhibition’s full textual and graphic content is available online, the physical models alone are worth a trip to the Battery Park City headquarters.
    Intriguing questions arise from the exhibition without easy answers, setting the table for lively discussion and debate. One is whether the patenting of innovations like Ransome bar and the Système Hennebique incentivized technological progress or hindered useful technology transfer. Willis speculated, “Did the fact that there were inventions and patents mean that competition was discouraged, that the competition was only in the realm of business, rather than advancing the material?” A critical question is whether research into the chemistry of concrete, including MIT’s 2023 report on the self-healing properties of Roman pozzolana and proliferating claims about “green concrete” using alternatives to Portland cement, can lead to new types of the material with improved durability and lower emissions footprints. This exhibition provides a firm foundation in concrete’s fascinating history, opening space for informed speculation about its future.
    Bill Millard is a regular contributor to AN.
    #decades #ago #concrete #overtook #steel
    Decades ago, concrete overtook steel as the predominant structural material for towers worldwide—the Skyscraper Museum’s new exhibition examines why and how
    “Is that concrete all around, or is it in my head?” asked Ian Hunter in “All the Young Dudes,” the song David Bowie wrote for Mott the Hoople in 1972. Concrete is all around us, and we haven’t quite wrapped our heads around it. It’s one of the indispensable materials of modernity; as we try to decarbonize the built environment, it’s part of the problem, and innovations in its composition may become part of the solution. Understanding its history more clearly, the Skyscraper Museum’s new exhibition in Manhattan implies, just might help us employ it better. Concrete is “the second most used substance in the world, after water,” the museum’s founder/director/curator Carol Willis told AN during a recent visit. For plasticity, versatility, and compressive strength, reinforced concrete is hard to beat, though its performance is more problematic when assessed by the metric of embodied and operational carbon, a consideration the exhibition acknowledges up front. In tall construction, concrete has become nearly hegemonic, yet its central role, contend Willis and co-curator Thomas Leslie, formerly of Foster + Partners and now a professor at the University of Illinois, Urbana-Champaign, is underrecognized by the public and by mainstream architectural history. The current exhibition aims to change that perception. The Skyscraper Museum in Lower Manhattan features an exhibition, The Modern Concrete Skyscraper, which examines the history of material choices in building tall towers.The Modern Concrete Skyscraper examines the history of tall towers’ structural material choices, describing a transition from the early dominance of steel frames to the contemporary condition, in which most large buildings rely on concrete. This change did not happen instantly or for any single reason but through a combination of technical and economic factors, including innovations by various specialists, well-recognized and otherwise; the availability of high-quality limestone deposits near Chicago; and the differential development of materials industries in nations whose architecture grew prominent in recent decades. As supertalls reach ever higher—in the global race for official height rankings by the Council on Tall Buildings and Urban Habitatand national, corporate, or professional bragging rights—concrete’s dominance may not be permanent in that sector, given the challenge of pumping the material beyond a certain height.For the moment, however, concrete is ahead of its chief competitors, steel andtimber. Regardless of possible promotional inferences, Willis said, “we did not work with the industry in any way for this exhibition.” “The invention of steel and the grid of steel and the skeleton frame is only the first chapter of the history of the skyscraper,” Willis explained. “The second chapter, and the one that we’re in now, is concrete. Surprisingly, no one had ever told that story of the skyscraper today with a continuous narrative.” The exhibition traces the use of concrete back to the ancient Roman combination of aggregate and pozzolana—the chemical formula for which was “largely lost with the fall of the Roman Empire,” though some Byzantine and medieval structures approximated it. From there, the show explores comparable materials’ revival in 18th-century England, the patenting of Portland cement by Leeds builder Joseph Aspdin in 1824, the proof-of-concept concrete house by François Coignet in 1856, and the pivotal development of rebar in the mid-19th century, with overdue attention to Ernest Ransome’s 1903 Ingalls Building in Cincinnati, then the world’s tallest concrete building at 15 stories and arguably the first concrete skyscraper. The exhibition includes a timeline that depicts concrete’s origins in Rome to its contemporary use in skyscraper construction.Baker’s lectures, Willis reported, sometimes pose a deceptively simple question: “‘What is a skyscraper?’ In 1974, when the World Trade Center and Sears Tower are just finished, you would say it’s a very tall building that is built of steel, an office building in North America. But if you ask that same question today, the answer is: It’s a building that is mixed-use, constructed of concrete, andin Asia or the Middle East.” The exhibition organizes the history of concrete towers by eras of engineering innovation, devoting special attention to the 19th- and early-20th-century “patent era” of Claude Allen Porter Turnerand Henry Chandlee Turner, Ransome, and François Hennebique. In the postwar era, “concrete comes out onto the surfaceboth a structural material and aesthetic.” Brutalism, perhaps to some observers’ surprise, “does not figure very large in high-rise design,” Willis said, except for Paul Rudolph’s Tracey Towers in the Bronx. The exhibition, however, devotes considerable attention to the work of Pier Luigi Nervi, Bertrand Goldberg, and SOM’s Fazlur Khan, pioneer of the structural tube system in the 1960s and 1970s—followed by the postmodernist 1980s, when concrete could express either engineering values or ornamentation. The exhibition highlights a number of concrete towers, including Paul Rudolph’s Tracey Towers in the Bronx.“In the ’90s, there were material advances in engineering analysis and computerization that helped to predict performance, and so buildings can get taller and taller,” Willis said. The current era, if one looks to CTBUH rankings, is dominated by the supertalls seen in Dubai, Shanghai, and Kuala Lumpur, after the Petronas Towers“took the title of world’s tallest building from North America for the first time and traumatized everybody about that.” The previous record holder, Chicago’s SearsTower, comprised steel structural tubes on concrete caissons; with Petronas, headquarters of Malaysia’s national petroleum company of that name, a strong concrete industry was represented but a strong national steel industry was lacking, and as Willis frequently says, form follows finances. In any event, by the ’90s concrete was already becoming the standard material for supertalls, particularly on soft-soiled sites like Shanghai, where its water resistance and compressive strength are well suited to foundation construction. Its plasticity is also well suited to complex forms like the triangular Burj, Kuala Lumpur’s Merdeka 118, andthe even taller Jeddah Tower, designed to “confuse the wind,” shed vortices, and manage wind forces. Posing the same question Louis Kahn asked about the intentions of a brick, Willis said, with concrete “the answer is: anything you want.” The exhibition is front-loaded with scholarly material, presenting eight succinct yet informative wall texts on the timeline of concrete construction. The explanatory material is accompanied by ample photographs as well as structural models on loan from SOM, Pelli Clarke & Partners, and other firms. Some materials are repurposed from the museum’s previous shows, particularly Supertall!and Sky High and the Logic of Luxury. The models allow close examination of the Burj Khalifa, Petronas Towers, Jin Mao Tower, Merdeka 118, and others, including two unbuilt Chicago projects that would have exceeded 2,000 feet: the Miglin-Beitler Skyneedleand 7 South Dearborn. The Burj, Willis noted, was all structure and no facade for a time: When its curtain-wall manufacturer, Schmidlin, went bankrupt in 2006, it “ended up going to 100 stories without having a stitch of glass on it,” temporarily becoming a “1:1 scale model of the structural system up to 100 stories.” Its prominence justifies its appearance here in two models, including one from RWDI’s wind-tunnel studies. Eero Saarinen’s only skyscraper, built for CBS in 1965 and also known as “Black Rock,” under construction in New York City.The exhibition opened in March, with plans to stay up at least through October, with accompanying lectures and panels to be announced on the museum’s website. Though the exhibition’s full textual and graphic content is available online, the physical models alone are worth a trip to the Battery Park City headquarters. Intriguing questions arise from the exhibition without easy answers, setting the table for lively discussion and debate. One is whether the patenting of innovations like Ransome bar and the Système Hennebique incentivized technological progress or hindered useful technology transfer. Willis speculated, “Did the fact that there were inventions and patents mean that competition was discouraged, that the competition was only in the realm of business, rather than advancing the material?” A critical question is whether research into the chemistry of concrete, including MIT’s 2023 report on the self-healing properties of Roman pozzolana and proliferating claims about “green concrete” using alternatives to Portland cement, can lead to new types of the material with improved durability and lower emissions footprints. This exhibition provides a firm foundation in concrete’s fascinating history, opening space for informed speculation about its future. Bill Millard is a regular contributor to AN. #decades #ago #concrete #overtook #steel
    WWW.ARCHPAPER.COM
    Decades ago, concrete overtook steel as the predominant structural material for towers worldwide—the Skyscraper Museum’s new exhibition examines why and how
    “Is that concrete all around, or is it in my head?” asked Ian Hunter in “All the Young Dudes,” the song David Bowie wrote for Mott the Hoople in 1972. Concrete is all around us, and we haven’t quite wrapped our heads around it. It’s one of the indispensable materials of modernity; as we try to decarbonize the built environment, it’s part of the problem, and innovations in its composition may become part of the solution. Understanding its history more clearly, the Skyscraper Museum’s new exhibition in Manhattan implies, just might help us employ it better. Concrete is “the second most used substance in the world, after water,” the museum’s founder/director/curator Carol Willis told AN during a recent visit. For plasticity, versatility, and compressive strength, reinforced concrete is hard to beat, though its performance is more problematic when assessed by the metric of embodied and operational carbon, a consideration the exhibition acknowledges up front. In tall construction, concrete has become nearly hegemonic, yet its central role, contend Willis and co-curator Thomas Leslie, formerly of Foster + Partners and now a professor at the University of Illinois, Urbana-Champaign, is underrecognized by the public and by mainstream architectural history. The current exhibition aims to change that perception. The Skyscraper Museum in Lower Manhattan features an exhibition, The Modern Concrete Skyscraper, which examines the history of material choices in building tall towers. (Courtesy the Skyscraper Museum) The Modern Concrete Skyscraper examines the history of tall towers’ structural material choices, describing a transition from the early dominance of steel frames to the contemporary condition, in which most large buildings rely on concrete. This change did not happen instantly or for any single reason but through a combination of technical and economic factors, including innovations by various specialists, well-recognized and otherwise; the availability of high-quality limestone deposits near Chicago; and the differential development of materials industries in nations whose architecture grew prominent in recent decades. As supertalls reach ever higher—in the global race for official height rankings by the Council on Tall Buildings and Urban Habitat (CTBUH) and national, corporate, or professional bragging rights—concrete’s dominance may not be permanent in that sector, given the challenge of pumping the material beyond a certain height. (The 2,717-foot Burj Khalifa, formerly Burj Dubai, uses concrete up to 1,987 and steel above that point; Willis quotes SOM’s William Baker describing it as “the tallest steel building with a concrete foundation of 156 stories.”) For the moment, however, concrete is ahead of its chief competitors, steel and (on a smaller scale) timber. Regardless of possible promotional inferences, Willis said, “we did not work with the industry in any way for this exhibition.” “The invention of steel and the grid of steel and the skeleton frame is only the first chapter of the history of the skyscraper,” Willis explained. “The second chapter, and the one that we’re in now, is concrete. Surprisingly, no one had ever told that story of the skyscraper today with a continuous narrative.” The exhibition traces the use of concrete back to the ancient Roman combination of aggregate and pozzolana—the chemical formula for which was “largely lost with the fall of the Roman Empire,” though some Byzantine and medieval structures approximated it. From there, the show explores comparable materials’ revival in 18th-century England, the patenting of Portland cement by Leeds builder Joseph Aspdin in 1824, the proof-of-concept concrete house by François Coignet in 1856, and the pivotal development of rebar in the mid-19th century, with overdue attention to Ernest Ransome’s 1903 Ingalls Building in Cincinnati, then the world’s tallest concrete building at 15 stories and arguably the first concrete skyscraper. The exhibition includes a timeline that depicts concrete’s origins in Rome to its contemporary use in skyscraper construction. (Courtesy the Skyscraper Museum) Baker’s lectures, Willis reported, sometimes pose a deceptively simple question: “‘What is a skyscraper?’ In 1974, when the World Trade Center and Sears Tower are just finished, you would say it’s a very tall building that is built of steel, an office building in North America. But if you ask that same question today, the answer is: It’s a building that is mixed-use, constructed of concrete, and [located] in Asia or the Middle East.” The exhibition organizes the history of concrete towers by eras of engineering innovation, devoting special attention to the 19th- and early-20th-century “patent era” of Claude Allen Porter Turner (pioneer in flat-slab flooring and mushroom columns) and Henry Chandlee Turner (founder of Turner Construction), Ransome (who patented twisted-iron rebar), and François Hennebique (known for the re-inforced concrete system exemplified by Liverpool’s Royal Liver Building, the world’s tallest concrete office building when completed in 1911). In the postwar era, “concrete comes out onto the surface [as] both a structural material and aesthetic.” Brutalism, perhaps to some observers’ surprise, “does not figure very large in high-rise design,” Willis said, except for Paul Rudolph’s Tracey Towers in the Bronx. The exhibition, however, devotes considerable attention to the work of Pier Luigi Nervi, Bertrand Goldberg (particularly Marina City), and SOM’s Fazlur Khan, pioneer of the structural tube system in the 1960s and 1970s—followed by the postmodernist 1980s, when concrete could express either engineering values or ornamentation. The exhibition highlights a number of concrete towers, including Paul Rudolph’s Tracey Towers in the Bronx. (Courtesy the Skyscraper Museum) “In the ’90s, there were material advances in engineering analysis and computerization that helped to predict performance, and so buildings can get taller and taller,” Willis said. The current era, if one looks to CTBUH rankings, is dominated by the supertalls seen in Dubai, Shanghai, and Kuala Lumpur, after the Petronas Towers (1998) “took the title of world’s tallest building from North America for the first time and traumatized everybody about that.” The previous record holder, Chicago’s Sears (now Willis) Tower, comprised steel structural tubes on concrete caissons; with Petronas, headquarters of Malaysia’s national petroleum company of that name, a strong concrete industry was represented but a strong national steel industry was lacking, and as Willis frequently says, form follows finances. In any event, by the ’90s concrete was already becoming the standard material for supertalls, particularly on soft-soiled sites like Shanghai, where its water resistance and compressive strength are well suited to foundation construction. Its plasticity is also well suited to complex forms like the triangular Burj, Kuala Lumpur’s Merdeka 118, and (if eventually completed) the even taller Jeddah Tower, designed to “confuse the wind,” shed vortices, and manage wind forces. Posing the same question Louis Kahn asked about the intentions of a brick, Willis said, with concrete “the answer is: anything you want.” The exhibition is front-loaded with scholarly material, presenting eight succinct yet informative wall texts on the timeline of concrete construction. The explanatory material is accompanied by ample photographs as well as structural models on loan from SOM, Pelli Clarke & Partners, and other firms. Some materials are repurposed from the museum’s previous shows, particularly Supertall! (2011–12) and Sky High and the Logic of Luxury (2013–14). The models allow close examination of the Burj Khalifa, Petronas Towers, Jin Mao Tower, Merdeka 118, and others, including two unbuilt Chicago projects that would have exceeded 2,000 feet: the Miglin-Beitler Skyneedle (Cesar Pelli/Thornton Tomasetti) and 7 South Dearborn (SOM). The Burj, Willis noted, was all structure and no facade for a time: When its curtain-wall manufacturer, Schmidlin, went bankrupt in 2006, it “ended up going to 100 stories without having a stitch of glass on it,” temporarily becoming a “1:1 scale model of the structural system up to 100 stories.” Its prominence justifies its appearance here in two models, including one from RWDI’s wind-tunnel studies. Eero Saarinen’s only skyscraper, built for CBS in 1965 and also known as “Black Rock,” under construction in New York City. (Courtesy Eero Saarinen Collection, Manuscripts, and Archives, Yale University Library) The exhibition opened in March, with plans to stay up at least through October (Willis prefers to keep the date flexible), with accompanying lectures and panels to be announced on the museum’s website (skyscraper.org). Though the exhibition’s full textual and graphic content is available online, the physical models alone are worth a trip to the Battery Park City headquarters. Intriguing questions arise from the exhibition without easy answers, setting the table for lively discussion and debate. One is whether the patenting of innovations like Ransome bar and the Système Hennebique incentivized technological progress or hindered useful technology transfer. Willis speculated, “Did the fact that there were inventions and patents mean that competition was discouraged, that the competition was only in the realm of business, rather than advancing the material?” A critical question is whether research into the chemistry of concrete, including MIT’s 2023 report on the self-healing properties of Roman pozzolana and proliferating claims about “green concrete” using alternatives to Portland cement, can lead to new types of the material with improved durability and lower emissions footprints. This exhibition provides a firm foundation in concrete’s fascinating history, opening space for informed speculation about its future. Bill Millard is a regular contributor to AN.
    Like
    Love
    Wow
    Sad
    Angry
    553
    0 Comentários 0 Compartilhamentos
  • New Multi-Axis Tool from Virginia Tech Boosts Fiber-Reinforced 3D Printing

    Researchers from the Department of Mechanical Engineering at Virginia Tech have introduced a continuous fiber reinforcementdeposition tool designed for multi-axis 3D printing, significantly enhancing mechanical performance in composite structures. Led by Kieran D. Beaumont, Joseph R. Kubalak, and Christopher B. Williams, and published in Springer Nature Link, the study demonstrates an 820% improvement in maximum load capacity compared to conventional planar short carbon fiber3D printing methods. This tool integrates three key functions: reliable fiber cutting and re-feeding, in situ fiber volume fraction control, and a slender collision volume to support complex multi-axis toolpaths.
    The newly developed deposition tool addresses critical challenges in CFR additive manufacturing. It is capable of cutting and re-feeding continuous fibers during travel movements, a function required to create complex geometries without material tearing or print failure. In situ control of fiber volume fraction is also achieved by adjusting the polymer extrusion rate. A slender geometry minimizes collisions between the tool and the printed part during multi-axis movements.
    The researchers designed the tool to co-extrude a thermoplastic polymer matrix with a continuous carbon fibertowpreg. This approach allowed reliable fiber re-feeding after each cut and enabled printing with variable fiber content within a single part. The tool’s slender collision volume supports increased range of motion for the robotic arm used in the experiments, allowing alignment of fibers with three-dimensional load paths in complex structures.
    The six Degree-of-Freedom Robotic Arm printing a multi-axis geometry from a CFR polymer composite. Photo via Springer Nature Link.
    Mechanical Testing Confirms Load-Bearing Improvements
    Mechanical tests evaluated the impact of continuous fiber reinforcement on polylactic acidparts. In tensile tests, samples reinforced with continuous carbon fibers achieved a tensile strength of 190.76 MPa and a tensile modulus of 9.98 GPa in the fiber direction. These values compare to 60.31 MPa and 3.01 GPa for neat PLA, and 56.92 MPa and 4.30 GPa for parts containing short carbon fibers. Additional tests assessed intra-layer and inter-layer performance, revealing that the continuous fiber–reinforced material had reduced mechanical properties in these orientations. Compared to neat PLA, intra-layer tensile strength and modulus dropped by 66% and 63%, respectively, and inter-layer strength and modulus decreased by 86% and 60%.
    Researchers printed curved tensile bar geometries using three methods to evaluate performance in parts with three-dimensional load paths: planar short carbon fiber–reinforced PLA, multi-axis short fiber–reinforced samples, and multi-axis continuous fiber–reinforced composites. The multi-axis short fiber–reinforced parts showed a 41.6% increase in maximum load compared to their planar counterparts. Meanwhile, multi-axis continuous fiber–reinforced parts absorbed loads 8.2 times higher than the planar short fiber–reinforced specimens. Scanning electron microscopyimages of fracture surfaces revealed fiber pull-out and limited fiber-matrix bonding, particularly in samples with continuous fibers.
    Schematic illustration of common continuous fiber reinforcement–material extrusionmodalities: in situ impregnation, towpreg extrusion, and co-extrusion with towpreg. Photo via Springer Nature Link.
    To verify the tool’s fiber cutting and re-feeding capability, the researchers printed a 100 × 150 × 3 mm rectangular plaque that required 426 cutting and re-feeding operations across six layers. The deposition tool achieved a 100% success rate, demonstrating reliable cutting and re-feeding without fiber clogging. This reliability is critical for manufacturing complex structures that require frequent travel movements between deposition paths.
    In situ fiber volume fraction control was validated through printing a rectangular prism sample with varying polymer feed rates, road widths, and layer heights. The fiber volume fractions achieved in different sections of the part were 6.51%, 8.00%, and 9.86%, as measured by cross-sectional microscopy and image analysis. Although lower than some literature reports, the researchers attributed this to the specific combination of tool geometry, polymer-fiber interaction time, and print speed.
    The tool uses Anisoprint’s CCF towpreg, a pre-impregnated continuous carbon fiber product with a fiber volume fraction of 57% and a diameter of 0.35 mm. 3DXTECH’s black PLA and SCF-PLA filaments were selected to ensure consistent matrix properties and avoid the influence of pigment variations on mechanical testing. The experiments were conducted using an ABB IRB 4600–40/2.55 robotic arm equipped with a tool changer for switching between the CFR-MEX deposition tool and a standard MEX tool with an elongated nozzle for planar prints.
    Deposition Tool CAD and Assembly. Photo via Springer Nature Link.
    Context Within Existing Research and Future Directions
    Continuous fiber reinforcement in additive manufacturing has previously demonstrated significant improvements in part performance, with some studies reporting tensile strengths of up to 650 MPa for PLA composites reinforced with continuous carbon fibers. However, traditional three-axis printing methods restrict fiber orientation to planar directions, limiting these gains to within the XY-plane. Multi-axis 3D printing approaches have demonstrated improved load-bearing capacity in short-fiber reinforced parts. For example, multi-axis printed samples have shown failure loads several times higher than planar-printed counterparts in pressure cap and curved geometry applications.
    Virginia Tech’s tool integrates multiple functionalities that previous tools in literature could not achieve simultaneously. It combines a polymer feeder based on a dual drive extruder, a fiber cutter and re-feeder assembly, and a co-extrusion hotend with adjustable interaction time for fiber-polymer bonding. A needle-like geometry and external pneumatic cooling pipes reduce the risk of collision with the printed part during multi-axis reorientation. Measured collision volume angles were 56.2° for the full tool and 41.6° for the hotend assembly.
    Load-extension performance graphs for curved tensile bars. Photo via Springer Nature Link.
    Despite these advances, the researchers identified challenges related to weak bonding between the fiber and the polymer matrix. SEM images showed limited impregnation of the polymer into the fiber towpreg, with the fiber-matrix interface remaining a key area for future work. The study highlights that optimizing fiber tow sizing and improving the fiber-polymer interaction time during printing could enhance inter-layer and intra-layer performance. The results also suggest that advanced toolpath planning algorithms could further leverage the tool’s ability to align fiber deposition along three-dimensional load paths, improving mechanical performance in functional parts.
    The publication in Springer Nature Link documents the full design, validation experiments, and mechanical characterization of the CFR-MEX tool. The work adds to a growing body of research on multi-axis additive manufacturing, particularly in combining continuous fiber reinforcement with complex geometries.
    Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes.
    Ready to discover who won the 20243D Printing Industry Awards?
    Subscribe to the 3D Printing Industry newsletter to stay updated with the latest news and insights.
    Featured photo shows the six Degree-of-Freedom Robotic Arm printing a multi-axis geometry. Photo via Springer Nature Link.

    Anyer Tenorio Lara
    Anyer Tenorio Lara is an emerging tech journalist passionate about uncovering the latest advances in technology and innovation. With a sharp eye for detail and a talent for storytelling, Anyer has quickly made a name for himself in the tech community. Anyer's articles aim to make complex subjects accessible and engaging for a broad audience. In addition to his writing, Anyer enjoys participating in industry events and discussions, eager to learn and share knowledge in the dynamic world of technology.
    #new #multiaxis #tool #virginia #tech
    New Multi-Axis Tool from Virginia Tech Boosts Fiber-Reinforced 3D Printing
    Researchers from the Department of Mechanical Engineering at Virginia Tech have introduced a continuous fiber reinforcementdeposition tool designed for multi-axis 3D printing, significantly enhancing mechanical performance in composite structures. Led by Kieran D. Beaumont, Joseph R. Kubalak, and Christopher B. Williams, and published in Springer Nature Link, the study demonstrates an 820% improvement in maximum load capacity compared to conventional planar short carbon fiber3D printing methods. This tool integrates three key functions: reliable fiber cutting and re-feeding, in situ fiber volume fraction control, and a slender collision volume to support complex multi-axis toolpaths. The newly developed deposition tool addresses critical challenges in CFR additive manufacturing. It is capable of cutting and re-feeding continuous fibers during travel movements, a function required to create complex geometries without material tearing or print failure. In situ control of fiber volume fraction is also achieved by adjusting the polymer extrusion rate. A slender geometry minimizes collisions between the tool and the printed part during multi-axis movements. The researchers designed the tool to co-extrude a thermoplastic polymer matrix with a continuous carbon fibertowpreg. This approach allowed reliable fiber re-feeding after each cut and enabled printing with variable fiber content within a single part. The tool’s slender collision volume supports increased range of motion for the robotic arm used in the experiments, allowing alignment of fibers with three-dimensional load paths in complex structures. The six Degree-of-Freedom Robotic Arm printing a multi-axis geometry from a CFR polymer composite. Photo via Springer Nature Link. Mechanical Testing Confirms Load-Bearing Improvements Mechanical tests evaluated the impact of continuous fiber reinforcement on polylactic acidparts. In tensile tests, samples reinforced with continuous carbon fibers achieved a tensile strength of 190.76 MPa and a tensile modulus of 9.98 GPa in the fiber direction. These values compare to 60.31 MPa and 3.01 GPa for neat PLA, and 56.92 MPa and 4.30 GPa for parts containing short carbon fibers. Additional tests assessed intra-layer and inter-layer performance, revealing that the continuous fiber–reinforced material had reduced mechanical properties in these orientations. Compared to neat PLA, intra-layer tensile strength and modulus dropped by 66% and 63%, respectively, and inter-layer strength and modulus decreased by 86% and 60%. Researchers printed curved tensile bar geometries using three methods to evaluate performance in parts with three-dimensional load paths: planar short carbon fiber–reinforced PLA, multi-axis short fiber–reinforced samples, and multi-axis continuous fiber–reinforced composites. The multi-axis short fiber–reinforced parts showed a 41.6% increase in maximum load compared to their planar counterparts. Meanwhile, multi-axis continuous fiber–reinforced parts absorbed loads 8.2 times higher than the planar short fiber–reinforced specimens. Scanning electron microscopyimages of fracture surfaces revealed fiber pull-out and limited fiber-matrix bonding, particularly in samples with continuous fibers. Schematic illustration of common continuous fiber reinforcement–material extrusionmodalities: in situ impregnation, towpreg extrusion, and co-extrusion with towpreg. Photo via Springer Nature Link. To verify the tool’s fiber cutting and re-feeding capability, the researchers printed a 100 × 150 × 3 mm rectangular plaque that required 426 cutting and re-feeding operations across six layers. The deposition tool achieved a 100% success rate, demonstrating reliable cutting and re-feeding without fiber clogging. This reliability is critical for manufacturing complex structures that require frequent travel movements between deposition paths. In situ fiber volume fraction control was validated through printing a rectangular prism sample with varying polymer feed rates, road widths, and layer heights. The fiber volume fractions achieved in different sections of the part were 6.51%, 8.00%, and 9.86%, as measured by cross-sectional microscopy and image analysis. Although lower than some literature reports, the researchers attributed this to the specific combination of tool geometry, polymer-fiber interaction time, and print speed. The tool uses Anisoprint’s CCF towpreg, a pre-impregnated continuous carbon fiber product with a fiber volume fraction of 57% and a diameter of 0.35 mm. 3DXTECH’s black PLA and SCF-PLA filaments were selected to ensure consistent matrix properties and avoid the influence of pigment variations on mechanical testing. The experiments were conducted using an ABB IRB 4600–40/2.55 robotic arm equipped with a tool changer for switching between the CFR-MEX deposition tool and a standard MEX tool with an elongated nozzle for planar prints. Deposition Tool CAD and Assembly. Photo via Springer Nature Link. Context Within Existing Research and Future Directions Continuous fiber reinforcement in additive manufacturing has previously demonstrated significant improvements in part performance, with some studies reporting tensile strengths of up to 650 MPa for PLA composites reinforced with continuous carbon fibers. However, traditional three-axis printing methods restrict fiber orientation to planar directions, limiting these gains to within the XY-plane. Multi-axis 3D printing approaches have demonstrated improved load-bearing capacity in short-fiber reinforced parts. For example, multi-axis printed samples have shown failure loads several times higher than planar-printed counterparts in pressure cap and curved geometry applications. Virginia Tech’s tool integrates multiple functionalities that previous tools in literature could not achieve simultaneously. It combines a polymer feeder based on a dual drive extruder, a fiber cutter and re-feeder assembly, and a co-extrusion hotend with adjustable interaction time for fiber-polymer bonding. A needle-like geometry and external pneumatic cooling pipes reduce the risk of collision with the printed part during multi-axis reorientation. Measured collision volume angles were 56.2° for the full tool and 41.6° for the hotend assembly. Load-extension performance graphs for curved tensile bars. Photo via Springer Nature Link. Despite these advances, the researchers identified challenges related to weak bonding between the fiber and the polymer matrix. SEM images showed limited impregnation of the polymer into the fiber towpreg, with the fiber-matrix interface remaining a key area for future work. The study highlights that optimizing fiber tow sizing and improving the fiber-polymer interaction time during printing could enhance inter-layer and intra-layer performance. The results also suggest that advanced toolpath planning algorithms could further leverage the tool’s ability to align fiber deposition along three-dimensional load paths, improving mechanical performance in functional parts. The publication in Springer Nature Link documents the full design, validation experiments, and mechanical characterization of the CFR-MEX tool. The work adds to a growing body of research on multi-axis additive manufacturing, particularly in combining continuous fiber reinforcement with complex geometries. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. Ready to discover who won the 20243D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletter to stay updated with the latest news and insights. Featured photo shows the six Degree-of-Freedom Robotic Arm printing a multi-axis geometry. Photo via Springer Nature Link. Anyer Tenorio Lara Anyer Tenorio Lara is an emerging tech journalist passionate about uncovering the latest advances in technology and innovation. With a sharp eye for detail and a talent for storytelling, Anyer has quickly made a name for himself in the tech community. Anyer's articles aim to make complex subjects accessible and engaging for a broad audience. In addition to his writing, Anyer enjoys participating in industry events and discussions, eager to learn and share knowledge in the dynamic world of technology. #new #multiaxis #tool #virginia #tech
    3DPRINTINGINDUSTRY.COM
    New Multi-Axis Tool from Virginia Tech Boosts Fiber-Reinforced 3D Printing
    Researchers from the Department of Mechanical Engineering at Virginia Tech have introduced a continuous fiber reinforcement (CFR) deposition tool designed for multi-axis 3D printing, significantly enhancing mechanical performance in composite structures. Led by Kieran D. Beaumont, Joseph R. Kubalak, and Christopher B. Williams, and published in Springer Nature Link, the study demonstrates an 820% improvement in maximum load capacity compared to conventional planar short carbon fiber (SCF) 3D printing methods. This tool integrates three key functions: reliable fiber cutting and re-feeding, in situ fiber volume fraction control, and a slender collision volume to support complex multi-axis toolpaths. The newly developed deposition tool addresses critical challenges in CFR additive manufacturing. It is capable of cutting and re-feeding continuous fibers during travel movements, a function required to create complex geometries without material tearing or print failure. In situ control of fiber volume fraction is also achieved by adjusting the polymer extrusion rate. A slender geometry minimizes collisions between the tool and the printed part during multi-axis movements. The researchers designed the tool to co-extrude a thermoplastic polymer matrix with a continuous carbon fiber (CCF) towpreg. This approach allowed reliable fiber re-feeding after each cut and enabled printing with variable fiber content within a single part. The tool’s slender collision volume supports increased range of motion for the robotic arm used in the experiments, allowing alignment of fibers with three-dimensional load paths in complex structures. The six Degree-of-Freedom Robotic Arm printing a multi-axis geometry from a CFR polymer composite. Photo via Springer Nature Link. Mechanical Testing Confirms Load-Bearing Improvements Mechanical tests evaluated the impact of continuous fiber reinforcement on polylactic acid (PLA) parts. In tensile tests, samples reinforced with continuous carbon fibers achieved a tensile strength of 190.76 MPa and a tensile modulus of 9.98 GPa in the fiber direction. These values compare to 60.31 MPa and 3.01 GPa for neat PLA, and 56.92 MPa and 4.30 GPa for parts containing short carbon fibers. Additional tests assessed intra-layer and inter-layer performance, revealing that the continuous fiber–reinforced material had reduced mechanical properties in these orientations. Compared to neat PLA, intra-layer tensile strength and modulus dropped by 66% and 63%, respectively, and inter-layer strength and modulus decreased by 86% and 60%. Researchers printed curved tensile bar geometries using three methods to evaluate performance in parts with three-dimensional load paths: planar short carbon fiber–reinforced PLA, multi-axis short fiber–reinforced samples, and multi-axis continuous fiber–reinforced composites. The multi-axis short fiber–reinforced parts showed a 41.6% increase in maximum load compared to their planar counterparts. Meanwhile, multi-axis continuous fiber–reinforced parts absorbed loads 8.2 times higher than the planar short fiber–reinforced specimens. Scanning electron microscopy (SEM) images of fracture surfaces revealed fiber pull-out and limited fiber-matrix bonding, particularly in samples with continuous fibers. Schematic illustration of common continuous fiber reinforcement–material extrusion (CFR-MEX) modalities: in situ impregnation, towpreg extrusion, and co-extrusion with towpreg. Photo via Springer Nature Link. To verify the tool’s fiber cutting and re-feeding capability, the researchers printed a 100 × 150 × 3 mm rectangular plaque that required 426 cutting and re-feeding operations across six layers. The deposition tool achieved a 100% success rate, demonstrating reliable cutting and re-feeding without fiber clogging. This reliability is critical for manufacturing complex structures that require frequent travel movements between deposition paths. In situ fiber volume fraction control was validated through printing a rectangular prism sample with varying polymer feed rates, road widths, and layer heights. The fiber volume fractions achieved in different sections of the part were 6.51%, 8.00%, and 9.86%, as measured by cross-sectional microscopy and image analysis. Although lower than some literature reports, the researchers attributed this to the specific combination of tool geometry, polymer-fiber interaction time, and print speed. The tool uses Anisoprint’s CCF towpreg, a pre-impregnated continuous carbon fiber product with a fiber volume fraction of 57% and a diameter of 0.35 mm. 3DXTECH’s black PLA and SCF-PLA filaments were selected to ensure consistent matrix properties and avoid the influence of pigment variations on mechanical testing. The experiments were conducted using an ABB IRB 4600–40/2.55 robotic arm equipped with a tool changer for switching between the CFR-MEX deposition tool and a standard MEX tool with an elongated nozzle for planar prints. Deposition Tool CAD and Assembly. Photo via Springer Nature Link. Context Within Existing Research and Future Directions Continuous fiber reinforcement in additive manufacturing has previously demonstrated significant improvements in part performance, with some studies reporting tensile strengths of up to 650 MPa for PLA composites reinforced with continuous carbon fibers. However, traditional three-axis printing methods restrict fiber orientation to planar directions, limiting these gains to within the XY-plane. Multi-axis 3D printing approaches have demonstrated improved load-bearing capacity in short-fiber reinforced parts. For example, multi-axis printed samples have shown failure loads several times higher than planar-printed counterparts in pressure cap and curved geometry applications. Virginia Tech’s tool integrates multiple functionalities that previous tools in literature could not achieve simultaneously. It combines a polymer feeder based on a dual drive extruder, a fiber cutter and re-feeder assembly, and a co-extrusion hotend with adjustable interaction time for fiber-polymer bonding. A needle-like geometry and external pneumatic cooling pipes reduce the risk of collision with the printed part during multi-axis reorientation. Measured collision volume angles were 56.2° for the full tool and 41.6° for the hotend assembly. Load-extension performance graphs for curved tensile bars. Photo via Springer Nature Link. Despite these advances, the researchers identified challenges related to weak bonding between the fiber and the polymer matrix. SEM images showed limited impregnation of the polymer into the fiber towpreg, with the fiber-matrix interface remaining a key area for future work. The study highlights that optimizing fiber tow sizing and improving the fiber-polymer interaction time during printing could enhance inter-layer and intra-layer performance. The results also suggest that advanced toolpath planning algorithms could further leverage the tool’s ability to align fiber deposition along three-dimensional load paths, improving mechanical performance in functional parts. The publication in Springer Nature Link documents the full design, validation experiments, and mechanical characterization of the CFR-MEX tool. The work adds to a growing body of research on multi-axis additive manufacturing, particularly in combining continuous fiber reinforcement with complex geometries. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. Ready to discover who won the 20243D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletter to stay updated with the latest news and insights. Featured photo shows the six Degree-of-Freedom Robotic Arm printing a multi-axis geometry. Photo via Springer Nature Link. Anyer Tenorio Lara Anyer Tenorio Lara is an emerging tech journalist passionate about uncovering the latest advances in technology and innovation. With a sharp eye for detail and a talent for storytelling, Anyer has quickly made a name for himself in the tech community. Anyer's articles aim to make complex subjects accessible and engaging for a broad audience. In addition to his writing, Anyer enjoys participating in industry events and discussions, eager to learn and share knowledge in the dynamic world of technology.
    Like
    Love
    Wow
    Sad
    Angry
    323
    0 Comentários 0 Compartilhamentos
  • Long, dark 'streaks' spotted on Mars aren't what scientists thought

    Martian "slope streaks" spotted by NASA's Mars Reconnaissance Orbiter in 2017. Scientists previously thought these large, discolored features may be signs of running water.Mysterious dark streaks flowing across Mars's surface may not be the result of running water after all, a new artificial intelligenceanalysis suggests.The streaks, first observed running along Mars's cliffsides and crater walls by NASA's Viking mission in 1976, were long thought by scientists to have formed as a result of the flow of ancient water across the now mostly desiccated planet's surface.But an AI algorithm trained on slope streak observations has revealed a different origin for the streaks — likely being formed from wind and dust, not water. The findings, published May 19 in the journal Nature Communications, could have important implications for where humans choose to explore Mars, and the places they search for evidence of possible ancient life.

    "That's the advantage of this big data approach," study co-author Adomas Valantinas, a planetary scientist at Brown University, said in a statement. "It helps us to rule out some hypotheses from orbit before we send spacecraft to explore."The sinewy lines are darker than the surrounding Martian ground and extend for hundreds of meters downhill. The shorter-lived of these features are called recurring slope lineae, and regularly spring up during Mars's warmer spells.This led some planetary scientists to suggest that seasonal temperature fluctuations could be causing ice or frozen aquifers to melt, or humid air to condense, sending streams of salty water trickling down the planet's craters. If this were true, it would make these regions of particular interest to future Mars missions.To investigate this, the scientists behind the study trained a machine learning algorithm on confirmed streak sightings before making it scan through 86,000 satellite images to create a map of 500,000 streak features.RELATED STORIES"Once we had this global map, we could compare it to databases and catalogs of other things like temperature, wind speed, hydration, rock slide activity and other factors." Bickel said. "Then we could look for correlations over hundreds of thousands of cases to better understand the conditions under which these features form."Using the map, the scientists found the streaks were most likely to form in places where wind speed and dust deposition was high, suggesting that they came from layers of fine dust sliding off steep slopes.Other studies have pointed to tantalizing evidence of water and even life on Mars. If the study findings hold up, they could serve as a guide to sift between the Red Planet's useful leads and its red herrings.

    Sign up for the Live Science daily newsletter nowGet the world’s most fascinating discoveries delivered straight to your inbox.
    #long #dark #039streaks039 #spotted #mars
    Long, dark 'streaks' spotted on Mars aren't what scientists thought
    Martian "slope streaks" spotted by NASA's Mars Reconnaissance Orbiter in 2017. Scientists previously thought these large, discolored features may be signs of running water.Mysterious dark streaks flowing across Mars's surface may not be the result of running water after all, a new artificial intelligenceanalysis suggests.The streaks, first observed running along Mars's cliffsides and crater walls by NASA's Viking mission in 1976, were long thought by scientists to have formed as a result of the flow of ancient water across the now mostly desiccated planet's surface.But an AI algorithm trained on slope streak observations has revealed a different origin for the streaks — likely being formed from wind and dust, not water. The findings, published May 19 in the journal Nature Communications, could have important implications for where humans choose to explore Mars, and the places they search for evidence of possible ancient life. "That's the advantage of this big data approach," study co-author Adomas Valantinas, a planetary scientist at Brown University, said in a statement. "It helps us to rule out some hypotheses from orbit before we send spacecraft to explore."The sinewy lines are darker than the surrounding Martian ground and extend for hundreds of meters downhill. The shorter-lived of these features are called recurring slope lineae, and regularly spring up during Mars's warmer spells.This led some planetary scientists to suggest that seasonal temperature fluctuations could be causing ice or frozen aquifers to melt, or humid air to condense, sending streams of salty water trickling down the planet's craters. If this were true, it would make these regions of particular interest to future Mars missions.To investigate this, the scientists behind the study trained a machine learning algorithm on confirmed streak sightings before making it scan through 86,000 satellite images to create a map of 500,000 streak features.RELATED STORIES"Once we had this global map, we could compare it to databases and catalogs of other things like temperature, wind speed, hydration, rock slide activity and other factors." Bickel said. "Then we could look for correlations over hundreds of thousands of cases to better understand the conditions under which these features form."Using the map, the scientists found the streaks were most likely to form in places where wind speed and dust deposition was high, suggesting that they came from layers of fine dust sliding off steep slopes.Other studies have pointed to tantalizing evidence of water and even life on Mars. If the study findings hold up, they could serve as a guide to sift between the Red Planet's useful leads and its red herrings. Sign up for the Live Science daily newsletter nowGet the world’s most fascinating discoveries delivered straight to your inbox. #long #dark #039streaks039 #spotted #mars
    WWW.LIVESCIENCE.COM
    Long, dark 'streaks' spotted on Mars aren't what scientists thought
    Martian "slope streaks" spotted by NASA's Mars Reconnaissance Orbiter in 2017. Scientists previously thought these large, discolored features may be signs of running water. (Image credit: NASA/JPL-Caltech/University of Arizona) Mysterious dark streaks flowing across Mars's surface may not be the result of running water after all, a new artificial intelligence (AI) analysis suggests.The streaks, first observed running along Mars's cliffsides and crater walls by NASA's Viking mission in 1976, were long thought by scientists to have formed as a result of the flow of ancient water across the now mostly desiccated planet's surface.But an AI algorithm trained on slope streak observations has revealed a different origin for the streaks — likely being formed from wind and dust, not water. The findings, published May 19 in the journal Nature Communications, could have important implications for where humans choose to explore Mars, and the places they search for evidence of possible ancient life. "That's the advantage of this big data approach," study co-author Adomas Valantinas, a planetary scientist at Brown University, said in a statement. "It helps us to rule out some hypotheses from orbit before we send spacecraft to explore."The sinewy lines are darker than the surrounding Martian ground and extend for hundreds of meters downhill. The shorter-lived of these features are called recurring slope lineae (RSL), and regularly spring up during Mars's warmer spells.This led some planetary scientists to suggest that seasonal temperature fluctuations could be causing ice or frozen aquifers to melt, or humid air to condense, sending streams of salty water trickling down the planet's craters. If this were true, it would make these regions of particular interest to future Mars missions.To investigate this, the scientists behind the study trained a machine learning algorithm on confirmed streak sightings before making it scan through 86,000 satellite images to create a map of 500,000 streak features.RELATED STORIES"Once we had this global map, we could compare it to databases and catalogs of other things like temperature, wind speed, hydration, rock slide activity and other factors." Bickel said. "Then we could look for correlations over hundreds of thousands of cases to better understand the conditions under which these features form."Using the map, the scientists found the streaks were most likely to form in places where wind speed and dust deposition was high, suggesting that they came from layers of fine dust sliding off steep slopes.Other studies have pointed to tantalizing evidence of water and even life on Mars. If the study findings hold up, they could serve as a guide to sift between the Red Planet's useful leads and its red herrings. Sign up for the Live Science daily newsletter nowGet the world’s most fascinating discoveries delivered straight to your inbox.
    Like
    Wow
    Love
    Sad
    Angry
    349
    0 Comentários 0 Compartilhamentos