Corsair Overhauls Prebuilt, 3-Chamber Airflow Case, & Transparent PSUJune 5, 2025Last Updated: 2025-06-05We take a look at Corsair’s upcoming i600 pre-built PC, Air 5400 case, Frame 4000D prototype, and moreThe HighlightsCorsair’s i600 pre-built PC is a new revision on the company’s i500 and overhauls its GPU cooler and CPU radiatorThe Corsair Air 5400 is an airflow-targeted case that has air ducts on the top and bottom of its chassisCorsair has partnered with Singularity to develop the Frame 4000D prototype, which has an interesting power board that handles cable managementTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Corsair’s suite at Computex 2025 and liked some of the stuff the company had to show. Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangCorsair Air 5400Corsair will release its Air 5400, which is an airflow-targeted case. On the back side of the case is a giant hole, which couples with a front-mounted radiator that will allow the case to shove air straight out of it. This design allows it to focus air flow for the GPU entirely from its own set of fans at the bottom of the case. This is probably the most interesting case from Corsair we saw at Computex this year. It should be around $220, though that’s dependent on the everchanging tariff situation. Internally, the Air 5400 has a duct at the bottom where the case has 3x120mm fans (the entire case is actually set up to support all 120mm fans, which simplifies things). The duct is there to guide air into the GPU. Corsair claims that the case is getting about a 1-2 degree improvement with the duct in a like-for-like test. If you do end up with a front radiator, then a potential area that gets abandoned in terms of airflow might be around the VRM area and some of the board components like system memory.  There are mounts for fans up on top of the case along with an additional duct. Looking at the back of the case, there are 2 holes on the back, which is surprising for a 120mm fan. The spacing doesn’t look like it would fit a 120mm fan, but Corsair’s plan is to include a bracket that would adapt a 120mm fan here and would actually cut out into the glass area on the back, which would make you lose about 40% of the fan. This should help but raises some questions about whether it may cause acoustic issues when you partially blast air into a glass wall. Speaking of glass, the Air 5400’s glass is laminated. A couple companies are doing this now. Corsair says this helps the glass stay more put together to prevent shattering. Looking at the back side panel, there’s a big acrylic sheet coupled with an area where air can escape. Opening up the back panel, there’s a huge amount of cable-management depth. You can also see that the motherboard tray is punctured all of the way through. This causes concerns around structural rigidity, but Corsair is using a .8mm thick steel, which helps a little bit here. The company has also strengthened the case’s top panel compared to Corsair’s 4000D case, which received negative feedback in that area. The Air 5400 is set to be priced at $220 with 3x120mm fans included. i600 Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a direct donation or a Patreon contribution!)Corsair is updating its i500 pre-built PC, which we hated, with its upcoming i600, and the company has improved it a lot. The i500’s GPU cooling solution had basically no contact with any of the power components. The i600, on the other hand, has massive overhauls here. The case itself has only slightly changed, but the changes made accommodate larger radiators. The block for the video card, including the power components, is totally different in a way that looks promising. The stuff that jumped out to us right away about the i600 is the fin stacks for the VRM, which is connected to a shared copper nickel-plated base plate for the GPU and memory. Everything is connected to the same base plate, which is connected to the liquid cooler. This means all of the heat gets dumped into the liquid cooler. There’s pros and cons to this design. The pro is that all of the other components get cooled better. The downside is that the GPU itself is sharing the heat dissipation capacity with all of the other components in the cooler. This means you typically see some increase in the GPU temperature as a result. There’s ups and downs to this approach. It doesn’t necessarily mean one solution is better than the other as long as it’s all cooled. The i600 has copper bars, which contact the MOSFETs. Otherwise, it’s very similar to the i500. Corsair has also modified its CPU cooler radiator, where the company has moved its tanks off to the side. The tubes are also running in a different direction. Corsair is also moving to 25mm thick fans, where previously they had the slimmer 15mm fans. That extra 10mm will help with pressure and performance a lot. We plan on doing a review of the PC as soon as we buy one.Corsair Frame 4000DWe saw a prototype of Corsair’s Frame 4000D, where the company changed a few things. Corsair partnered with Singularity for its powerboard. It’s somewhat similar to Elmore’s BENCHLAB, with the exception of it not logging power. With the case, you basically run all of the power cables into the power board and then route them to their final locations. We count 10 fan headers here along with a bunch of RGB headers. There’s a lot of possibilities with this. Currently, it’s mostly being used as a cable-management tool, but you could, in theory, expand this to include more switches, like fan-control switches. We would really like to see current monitoring. It would make it more expensive but that could be a potentially useful direction to go in where you could monitor on the 12VHPWR, for instance, which would become a great marketing point for Corsair and would be very useful for end users. The front panel is also different as it has a die-cut edge now.  The power supply setup is also different here with Corsair doing an acrylic wall for the PSU instead of steel. The challenge here is that plastic is an incredibly good insulator. This could raise some ESD (electrostatic discharge) concerns and may cause the PSU to lose some of the shielding that steel provides. As a part of this design, Corsair has customized the caps and PCBs so that they get nice color matching. It looks pretty nice. 3D PrintingCorsair was telling us how for its upcoming 4000D and its Frame series cases, it was getting into 3D printable panels and pieces. They showed us how one Corsair employee 3D printed a shroud-like duct, which takes air in through the bottom and shoves it up into where the pump and reservoir are in the image above. These 3D print files are available on Corsair’s account on Printables.  Corsair 5000DWe didn’t care too much about it but Corsair also showed off its new 5000D that has a screen on it, which is a thing companies are doing now. They also had a 5000D case without the screen, which is a larger variant of the Frame 4000D case. Corsair says that it should be priced around $180, but that’s in flux with the tariffs situation.  Corsair Open Concept Visit our Patreon page to contribute a few dollars toward this website's operation (or consider a direct donation or buying something from our GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.Corsair’s open concept at Computex is using some of the same Frame components, where the company is trying to make the Frame series modular and represents an open frame. There’s also an option for fan mounts as well. The company showed a gigantic radiator tower at the show, which is pretty cool to see.

Email authentication protocols like SPF, DKIM, and DMARC play a critical role in protecting domains from spoofing and phishing. However, when SEGs are introduced into the email path, the interaction with these protocols becomes more complex. Security gateways(SEGs) are a core part of many organizations’ email infrastructure. They act as intermediaries between the public internet and internal mail systems, inspecting, filtering, and routing messages. This blog examines how security gateways handle SPF, DKIM, and DMARC, with real-world examples from popular gateways such as Proofpoint, Mimecast, and Avanan. We’ll also cover best practices for maintaining authentication integrity and avoiding misconfigurations that can compromise email authentication or lead to false DMARC failures. Security gateways often sit at the boundary between your organization and the internet, managing both inbound and outbound email traffic. Their role affects how email authentication protocols behave. An inbound SEG examines emails coming into your organization. It checks SPF, DKIM, and DMARC to determine if the message is authentic and safe before passing it to your internal mail servers. An outbound SEG handles emails sent from your domain. It may modify headers, rewrite envelope addresses, or even apply DKIM signing. All of these can impact SPF,  DKIM, or DMARC validation on the recipient’s side. Understanding how SEGs influence these flows is crucial to maintaining proper authentication and avoiding unexpected DMARC failures. Inbound Handling of SPF, DKIM, and DMARC by Common Security Gateways When an email comes into your organization, your security gateway is the first to inspect it. It checks whether the message is real, trustworthy, and properly authenticated. Let’s look at how different SEGs handle these checks. Avanan (by Check Point) SPF: Avanan verifies whether the sending server is authorized to send emails for the domain by checking the SPF record. DKIM: It verifies if the message was signed by the sending domain and if that signature is valid. DMARC: It uses the results of the SPF and DKIM check to evaluate DMARC. However, final enforcement usually depends on how DMARC is handled by Microsoft 365 or Gmail, as Avanan integrates directly with them. Avanan offers two methods of integration:1. API integration: Avanan connects via APIs, no change in MX, usually Monitor or Detect modes.2. Inline integration: Avanan is placed inline in the mail flow (MX records changed), actively blocking or remediating threats. Proofpoint Email Protection SPF: Proofpoint checks SPF to confirm the sender’s IP is authorized to send on behalf of the domain. You can set custom rules (e.g. treat “softfail” as “fail”). DKIM: It verifies DKIM signatures and shows clear pass/fail results in logs. DMARC: It fully evaluates DMARC by combining SPF and DKIM results with alignment checks. Administrators can configure how to handle messages that fail DMARC, such as rejecting, quarantining, or delivering them. Additionally, Proofpoint allows whitelisting specific senders you trust, even if their emails fail authentication checks. Integration Methods Inline Mode: In this traditional deployment, Proofpoint is positioned directly in the email flow by modifying MX records. Emails are routed through Proofpoint’s infrastructure, allowing it to inspect and filter messages before they reach the recipient’s inbox. This mode provides pre-delivery protection and is commonly used in on-premises or hybrid environments. API-Based (Integrated Cloud Email Security – ICES) Mode: Proofpoint offers API-based integration, particularly with cloud email platforms like Microsoft 365 and Google Workspace. In this mode, Proofpoint connects to the email platform via APIs, enabling it to monitor and remediate threats post-delivery without altering the email flow. This approach allows for rapid deployment and seamless integration with existing cloud email services. Mimecast SPF: Mimecast performs SPF checks to verify whether the sending server is authorized by the domain’s SPF record. Administrators can configure actions for SPF failures, including block, quarantine, permit, or tag with a warning. This gives flexibility in balancing security with business needs. DKIM: It validates DKIM signatures by checking that the message was correctly signed by the sending domain and that the content hasn’t been tampered with. If the signature fails, Mimecast can take actions based on your configured policies. DMARC: It fully evaluates DMARC by combining the results of SPF and DKIM with domain alignment checks. You can choose to honor the sending domain’s DMARC policy (none, quarantine, reject) or apply custom rules, for example, quarantining or tagging messages that fail DMARC regardless of the published policy. This allows more granular control for businesses that want to override external domain policies based on specific contexts. Integration Methods Inline Deployment: Mimecast is typically deployed as a cloud-based secure email gateway. Organizations update their domain’s MX records to point to Mimecast, so all inbound (and optionally outbound) emails pass through it first. This allows Mimecast to inspect, filter, and process emails before delivery, providing robust protection. API Integrations: Mimecast also offers API-based services through its Mimecast API platform, primarily for management, archival, continuity, and threat intelligence purposes. However, API-only email protection is not Mimecast’s core model. Instead, the APIs are used to enhance the inline deployment, not replace it. Barracuda Email Security Gateway SPF: Barracuda checks the sender’s IP against the domain’s published SPF record. If the check fails, you can configure the system to block, quarantine, tag, or allow the message, depending on your policy preferences. DKIM: It validates whether the incoming message includes a valid DKIM signature. The outcome is logged and used to inform further policy decisions or DMARC evaluations. DMARC: It combines SPF and DKIM results, checks for domain alignment, and applies the DMARC policy defined by the sender. Administrators can also choose to override the DMARC policy, allowing messages to pass or be treated differently based on organizational needs (e.g., trusted senders or internal exceptions). Integration Methods Inline mode (more common and straightforward): Barracuda Email Security Gateway is commonly deployed inline by updating your domain’s MX records to point to Barracuda’s cloud or on-premises gateway. This ensures that all inbound emails pass through Barracuda first for filtering and SPF, DKIM, and DMARC validation before being delivered to your mail servers. Deployment Behind the Corporate Firewall: Alternatively, Barracuda can be deployed in transparent or bridge mode without modifying MX records. In this setup, the gateway is placed inline at the network level, such as behind a firewall, and intercepts mail traffic transparently. This method is typically used in complex on-premises environments where changing DNS records is not feasible. Cisco Secure Email (formerly IronPort) Cisco Secure Email acts as an inline gateway for inbound email, usually requiring your domain’s MX records to point to the Cisco Email Security Appliance or cloud service. SPF: Cisco Secure Email verifies whether the sending server is authorized in the sender domain’s SPF record. Administrators can set detailed policies on how to handle SPF failures. DKIM: It validates the DKIM signature on incoming emails and logs whether the signature is valid or has failed. DMARC: It evaluates DMARC by combining SPF and DKIM results along with domain alignment checks. Admins can configure specific actions, such as quarantine, reject, or tag, based on different failure scenarios or trusted sender exceptions. Integration methods On-premises Email Security Appliance (ESA): You deploy Cisco’s hardware or virtual appliance inline, updating MX records to route mail through it for filtering. Cisco Cloud Email Security: Cisco offers a cloud-based email security service where MX records are pointed to Cisco’s cloud infrastructure, which filters and processes inbound mail. Cisco Secure Email also offers advanced, rule-based filtering capabilities and integrates with Cisco’s broader threat protection ecosystem, enabling comprehensive inbound email security. Outbound Handling of SPF, DKIM, and DMARC by Common Security Gateways When your organization sends emails, security gateways can play an active role in processing and authenticating those messages. Depending on the configuration, a gateway might rewrite headers, re-sign messages, or route them through different IPs – all actions that can help or hurt the authentication process. Let’s look at how major SEGs handle outbound email flow. Avanan – Outbound Handling and Integration Methods Outbound Logic Avanan analyzes outbound emails primarily to detect data loss, malware, and policy violations. In API-based integration, emails are sent directly by the original mail server (e.g., Microsoft 365 or Google Workspace), so SPF and DKIM signatures remain intact. Avanan does not alter the message or reroute traffic, which helps maintain full DMARC alignment and domain reputation. Integration Methods 1. API Integration: Connects to Microsoft 365 or Google Workspace via API. No MX changes are needed. Emails are scanned after they are sent, with no modification to SPF, DKIM, or the delivery path.  How it works: Microsoft Graph API or Google Workspace APIs are used to monitor and intervene in outbound emails. Protection level: Despite no MX changes, it can offer inline-like protection, meaning it can block, quarantine, or encrypt emails before they are delivered externally. SPF/DKIM/DMARC impact: Preserves original headers and signatures since mail is sent directly from Microsoft/Google servers. 2. Inline Integration: Requires changing MX records to route email through Avanan. In this mode, Avanan can intercept and inspect outbound emails before delivery. Depending on the configuration, this may affect SPF or DKIM if not properly handled. How it works: Requires adding Avanan’s Protection level: Traditional inline security with full visibility and control, including encryption, DLP, policy enforcement, and advanced threat protection. SPF/DKIM/DMARC impact: SPF configuration is needed by adding Avanan’s include mechanism to the sending domain’s SPF record. The DKIM record of the original sending source is preserved. For configurations, you can refer to the steps in this blog. Proofpoint – Outbound Handling and Integration Methods Outbound Logic Proofpoint analyzes outbound emails to detect and prevent data loss (DLP), to identify advanced threats (malware, phishing, BEC) originating from compromised internal accounts, and to ensure compliance. Their API integration provides crucial visibility and powerful remediation capabilities, while their traditional gateway (MX record) deployment delivers true inline, pre-delivery blocking for outbound traffic. Integration methods 1. API Integration: No MX record changes are required for this deployment method. Integration is done with Microsoft 365 or Google Workspace. How it works: Through its API integration, Proofpoint gains deep visibility into outbound emails and provides layered security and response features, including: Detect and alert: Identifies sensitive content (Data Loss Prevention violations), malicious attachments, or suspicious links in outbound emails. Post-delivery remediation (TRAP): A key capability of the API model is Threat Response Auto-Pull (TRAP), which enables Proofpoint to automatically recall, quarantine, or delete emails after delivery. This is particularly useful for internally sent messages or those forwarded to other users. Enhanced visibility: Aggregates message metadata and logs into Proofpoint’s threat intelligence platform, giving security teams a centralized view of outbound risks and user behavior. Protection level: API-based integration provides strong post-delivery detection and response, as well as visibility into DLP incidents and suspicious behavior.  SPF/DKIM/DMARC impact: Proofpoint does not alter SPF, DKIM, or DMARC because emails are sent directly through Microsoft or Google servers. Since Proofpoint’s servers are not involved in the actual sending process, the original authentication headers remain intact. 2. Gateway Integration (MX Record/Smart Host): This method requires updating MX records or routing outbound mail through Proofpoint via a smart host. How it works: Proofpoint acts as an inline gateway, inspecting emails before delivery. Inbound mail is filtered via MX changes; outbound mail is relayed through Proofpoint’s servers. Threat and DLP filtering: Scans outbound messages for sensitive content, malware, and policy violations. Real-time enforcement: Blocks, encrypts, or quarantines emails before they’re delivered. Policy controls: Applies rules based on content, recipient, or behavior. Protection level: Provides strong, real-time protection for outbound traffic with pre-delivery enforcement, DLP, and encryption. SPF/DKIM/DMARC impact: Proofpoint becomes the sending server: SPF: You need to configure ProofPoint’s SPF. DKIM: Can sign messages; requires DKIM setup. DMARC: DMARC passes if SPF and DKIM are set up properly. Please refer to this article to configure SPF and DKIM for ProofPoint. Mimecast – Outbound Handling and Integration Methods Outbound Logic Mimecast inspects outbound emails to prevent data loss (DLP), detect internal threats such as malware and impersonation, and ensure regulatory compliance. It primarily functions as a Secure Email Gateway (SEG), meaning it sits directly in the outbound email flow. While Mimecast offers APIs, its core outbound protection is built around this inline gateway model. Integration Methods 1. Gateway Integration (MX Record change required) This is Mimecast’s primary method for outbound email protection. Organizations route their outbound traffic through Mimecast by configuring their email server (e.g., Microsoft 365, Google Workspace, etc.) to use Mimecast as a smart host. This enables Mimecast to inspect and enforce policies on all outgoing emails in real time. How it works: Updating outbound routing in your email system (smart host settings), or Using Mimecast SMTP relay to direct messages through their infrastructure. Mimecast then scans, filters, and applies policies before the email reaches the final recipient. Protection level: Advanced DLP: Identifies and prevents sensitive data leaks. Impersonation and Threat Protection: Blocks malware, phishing, and abuse from compromised internal accounts. Email Encryption and Secure Messaging: Applies encryption policies or routes messages via secure portals. Regulatory Compliance: Enforces outbound compliance rules based on content, recipient, or metadata. SPF/DKIM/DMARC impact: SPF: Your SPF record must include Mimecast’s SPF mechanism based on your region to avoid SPF failures. DKIM: A new DKIM record should be configured to make sure your emails are DKIM signed when routing through Mimecast. DMARC: With correct SPF and DKIM setup, Mimecast ensures DMARC alignment, maintaining your domain’s sending reputation. Please refer to the steps in this detailed article to set up SPF and DKIM for Mimecast. 2. API Integration (Complementary to Gateway) Mimecast’s APIs complement the main gateway by providing automation, reporting, and management tools rather than handling live outbound mail flow. They allow you to manage policies, export logs, search archived emails, and sync users. APIs enhance visibility and operational tasks but do not provide real-time filtering or blocking of outbound messages. Since APIs don’t process live mail, they have no direct effect on SPF, DKIM, or DMARC; those depend on your gateway (smart host) setup. Barracuda – Outbound Handling and Integration Methods Outbound Logic Barracuda analyzes outbound emails to prevent data loss (DLP), block malware, stop phishing/impersonation attempts from compromised internal accounts, and ensure compliance. Barracuda offers flexible deployment options, including both traditional gateway (MX record) and API-based integrations. While both contribute to outbound security, their roles are distinct. Integration Methods 1. Gateway Integration (MX Record / Smart Host) — Primary Inline Security How it works: All outbound emails pass through Barracuda’s security stack for real-time inspection, threat blocking, and policy enforcement before delivery. Protection level: Comprehensive DLP (blocking, encrypting, or quarantining sensitive content)  Outbound spam and virus filtering  Enforcement of compliance and content policies This approach offers a high level of control and immediate threat mitigation on outbound mail flow. SPF/DKIM/DMARC impact: SPF: Update SPF records to include Barracuda’s sending IPs or SPF include mechanism. DKIM: Currently, no explicit setup is needed; DKIM of the main sending source is preserved. Refer to this article for more comprehensive guidance on Barracuda SEG configuration. 2. API Integration (Complementary & Advanced Threat Focus) How it works: The API accesses cloud email environments to analyze historical and real-time data, learning normal communication patterns to detect anomalies in outbound emails. It also supports post-delivery remediation, enabling the removal of malicious emails from internal mailboxes after sending. Protection level: Advanced AI-driven detection and near real-time blocking of outbound threats, plus strong post-delivery cleanup capabilities. SPF/DKIM/DMARC impact: Since mail is sent directly by the original mail server (e.g., Microsoft 365), SPF and DKIM signatures remain intact, preserving DMARC alignment and domain reputation. Cisco Secure Email (formerly IronPort) – Outbound Handling and Integration Methods Outbound Logic Cisco Secure Email protects outbound email by preventing data loss (DLP), blocking spam and malware from internal accounts, stopping business email compromise (BEC) and impersonation attacks, and ensuring compliance. Cisco provides both traditional gateway appliances/cloud gateways and modern API-based solutions for layered outbound security. Integration Methods 1. Gateway Integration (MX Record / Smart Host) – Cisco Secure Email Gateway (ESA) How it works: Organizations update MX records to route mail through the Cisco Secure Email Gateway or configure their mail server (e.g., Microsoft 365, Exchange) to smart host outbound email via the gateway. All outbound mail is inspected and policies enforced before delivery. Protection level: Granular DLP (blocking, encrypting, quarantining sensitive content) Outbound spam and malware filtering to protect IP reputation Email encryption for sensitive outbound messages Comprehensive content and attachment policy enforcement SPF: Check this article for comprehensive guidance on Cisco SPF settings. DKIM: Refer to this article for detailed guidance on Cisco DKIM settings. 2. API Integration – Cisco Secure Email Threat Defense How it works: Integrates directly via API with Microsoft 365 (and potentially Google Workspace), continuously monitoring email metadata, content, and user behavior across inbound, outbound, and internal messages. Leverages Cisco’s threat intelligence and AI to detect anomalous outbound activity linked to BEC, account takeover, and phishing. Post-Delivery Remediation: Automates the removal or quarantine of malicious or policy-violating emails from mailboxes even after sending. Protection level: Advanced, AI-driven detection of sophisticated outbound threats with real-time monitoring and automated remediation. Complements gateway filtering by adding cloud-native visibility and swift post-send action. SPF/DKIM/DMARC impact: Since emails are sent directly by the original mail server, SPF and DKIM signatures remain intact, preserving DMARC alignment and domain reputation. If you have any questions or need assistance, feel free to reach out to EasyDMARC technical support.

Nailing cross-channel marketing for your app is crucial in today’s ecosystem. This isn’t just a speculation, it’s a hard fact: the average mobile marketer uses 5 or fewer media sources, but CPIs tend to be much higher for marketers using 6 or more media sources, according to a report by Singular and ironSource Aura.It’s time to start looking elsewhere for users. Something to consider is returning to old-school, tried-and-true strategies that have taken a backseat as the industry has advanced, such as web acquisition campaigns. There are two clicks in these campaigns - the first click directs users from an ad to a web landing page and the second click directs users from the web page to the app store. While the funnel to get to your app is longer, it’s actually an opportunity. Let’s dive into why and how you should be running web-to-app acquisition campaigns.3 benefits of web-to-app campaignsWeb acquisition campaigns became tried-and-true for a reason and many apps are beginning to take advantage of the strategy to reduce costs, get better visibility, and expand their reach.Reduce costsWhile the cost of app acquisition campaigns is increasing as the space becomes more saturated, web campaigns have been underutilized in recent years. This means many advertisers are finding that the cost of web campaigns are less than app store acquisitions. Much of these higher costs comes from high app store fees - Apple takes a 30% cut from large developers and a 15% cut from smaller developers. The web remains a relatively low-cost, accessible channel.Get better visibilityWith the ability to direct users to your owned mobile site before they click to download your app, you get better visibility into new users and where they came from - the app store is a black box where it’s nearly impossible to match the user who clicked an ad to the user who downloaded your app. On top of that, longer funnels give you more control and insight into each step users take to get to your app - allowing you to better optimize your campaigns. For example, you can try out different web landing pages to find the most effective way to increase users’ understanding of your app before they download it. This increases your likelihood of, first, motivating users to download your app, and second, encouraging them to stick around.Expand your reachInternet users worldwide spent 415.5 minutes a day online in 2021 according to Oberlo. App users spend at most 300 mins a day in apps according to TechCrunch. The internet is still more prevalent than apps because, let’s face it, the web predates the app store. Even more so, users have become especially savvy on the web, visiting the search bar to research a brand, fact check a friend, or dive deeper into a news headline. This means that by running web campaigns, you’re reaching a massive audience - nearly the entire world population.Andre Kempe, Founder and CEO of Admiral Media says, “marketers consider web acquisition important because they’re reaching a different type of audience that may convert to becoming an active app user, even though they were surfing on a news website… When you start advertising for the web, you reach an audience you haven’t reached before. This is definitely a growth opportunity." Listen to the full podcast.Web campaigns are a tried and true strategy, which is what makes them so effective in today’s ecosystem. Realizing that you should be considering this acquisition channel, let’s discuss how web onboarding can help you maximize success.Maximize success with web onboardingTypically, users complete onboarding directly on your app. Web onboarding, however, means letting users register, subscribe, and sometimes pay on the web, before heading to your app. This way, users are fully prepared to start using your app before even clicking download, ensuring they can engage at full capacity as soon as download is complete.When users onboard through the app, they may not immediately decide to engage but at least the app is still on their phones reminding them everyday of its value - they’re likely to open it again at some point in time. When a user onboards on the web and decides your app isn’t valuable, they’ll never end up actually downloading it - it’s gone and forgotten before it even started. That said, with web onboarding, the users who end up downloading your app will do so with high-intent to actively engage. Plus, you don’t have to pay for users that download without ever engaging. Whatever category your app is - fitness, food delivery, dating, reading, learning, etc. - you can use the web touchpoint to drive quality users to your app.Ensure the transition is seamlessFirst, ensure the web experience mimics the app experience enough that users don’t feel jipped when they actually start using your app. The transition from the web to the app should be seamless. If you’re offering users a taste of your app, the web touchpoint should look exactly like your app or, at least, include all of the same features. If the buttons to adjust settings are on the right side of the page during onboarding, they should be on the right side in the app as well. To ensure users stick around, you have to give them what they signed up for.Give users a sneak peakYou should also determine your main selling point and give users a sneak peak. For example, if you’re a reading app that allows users to adjust the settings of the page, you could give users premium access to the first chapter of a book allowing them to adjust font size or brightness. Readers will not want to leave the experience behind, encouraging them to set up their subscription and input their credit card information on the web before heading to the app to continue reading the book. The best part - when they open your app for the first time they’ll be able to jump right into the app experience.Learn more about how to improve your app’s onboarding experienceWeb-to-app campaigns should not be ignored in this competitive landscape - lower costs, more visibility, better optimization, and strong reach. Going even further to onboard users through the web, you’re improving the quality of the users entering your app for the first time.

AGI will be embedded into humanoid robots, which makes white-collar and blue-collar jobs a target ... More for walking/talking automation.getty In today’s column, I examine the highly worrisome qualms expressed that the advent of artificial general intelligence (AGI) is likely to usurp white-collar jobs. The stated concern is that since AGI will be on par with human intellect, any job that relies principally on intellectual pursuits such as typical white-collar work will be taken over via the use of AGI. Employers will realize that rather than dealing with human white-collar workers, they can more readily get the job done via AGI. This, in turn, has led to a rising call that people should aim toward blue-collar jobs, doing so because (presumably) those forms of employment will not be undercut via AGI. Sorry to say, that misses the bigger picture, namely that AGI when combined with humanoid robots is coming not only for white-collar jobs but also blue-collar jobs too. It is a proverbial double-whammy when it comes to the attainment of AGI. Let’s talk about it. This analysis of an innovative AI breakthrough is part of my ongoing Forbes column coverage on the latest in AI, including identifying and explaining various impactful AI complexities (see the link here). Heading Toward AGI And ASI First, some fundamentals are required to set the stage for this weighty discussion. There is a great deal of research going on to further advance AI. The general goal is to either reach artificial general intelligence (AGI) or maybe even the outstretched possibility of achieving artificial superintelligence (ASI). AGI is AI that is considered on par with human intellect and can seemingly match our intelligence. ASI is AI that has gone beyond human intellect and would be superior in many if not all feasible ways. The idea is that ASI would be able to run circles around humans by outthinking us at every turn. For more details on the nature of conventional AI versus AGI and ASI, see my analysis at the link here. We have not yet attained AGI. In fact, it is unknown as to whether we will reach AGI, or that maybe AGI will be achievable in decades or perhaps centuries from now. The AGI attainment dates that are floating around are wildly varying and wildly unsubstantiated by any credible evidence or ironclad logic. ASI is even more beyond the pale when it comes to where we are currently with conventional AI. AGI Problem Only Half Seen Before launching into the primary matter at hand in this discussion, let’s contemplate a famous quote attributed to Charles Kettering, a legendary inventor, who said, “A problem well-stated is a problem half-solved.” I bring this up because those loud clamors right now about the assumption that AGI will replace white-collar workers are only seeing half of the problem. The problem as they see it is that since AGI is intellectually on par with humans, and since white-collar workers mainly use intellect in their work endeavors, AGI is going to be used in place of humans for white-collar work. I will in a moment explain why that’s only half of the problem and there is a demonstrative need to more carefully and fully articulate the nature of the problem. Will AGI Axiomatically Take White-Collar Jobs On a related facet, the belief that AGI will axiomatically replace white-collar labor makes a number of other related key assumptions. I shall briefly explore those and then come back to why the problem itself is only half-baked. The cost of using AGI for doing white-collar work will need to be presumably a better ROI choice over human workers. If not, then an employer would be wiser to stick with humans rather than employing AGI. There seems to often be an unstated belief that AGI is necessarily going to be a less costly route than employing humans. We don’t know yet what the cost of using AGI will be. It could be highly expensive. Indeed, some are worried that the world will divide into the AGI haves and AGI have-nots, partially due to the exorbitant cost that AGI might involve. If AGI is free to use, well, that would seem to be the nail in the coffin related to using human workers for the same capacity. Another angle is that AGI is relatively inexpensive in comparison to human labor. In that case, the use of AGI is likely to win over human labor usage. But if the cost of AGI is nearer to the cost of human labor (all in), or more so, then employers would rationally need to weigh the use of one versus the other. Note that when referring to the cost of human labor, there is more to that calculation than simply the dollar-hour labor rate per se. There are lots of other less apparent costs, such as the cost to manage human labor, the cost of dealing with HR-related issues, and many other factors that come into the weighty matter. Thus, an AGI versus human labor ROI will be more complex than it might seem at an initial glance. In addition, keep in mind that AGI would seemingly be readily switched on and off, and have other capacities that human labor would not equally tend to allow. The Other Half Is Coming Too Assume that by and large the advent of AGI will decimate the need for white-collar human labor. The refrain right now is that people should begin tilting toward blue-collar jobs as an alternative to white-collar jobs. This is a logical form of thinking in the sense that AGI as an intellectual mechanism would be unable to compete in jobs that involve hands-on work. A plumber needs to come to your house and do hands-on work to fix your plumbing. This is a physicality that entails arriving at your physical home, physically bringing and using tools, and physically repairing your faulty home plumbing. A truck driver likewise needs to sit in the cab of a truck and drive the vehicle. These are physically based tasks. There is no getting around the fact that these are hands-on activities. Aha, yes, those are physical tasks, but that doesn’t necessarily mean that only human hands can perform them. The gradual emergence of humanoid robots will provide an alternative to human hands. A humanoid robot is a type of robot that is built to resemble a human in form and function. You’ve undoubtedly seen those types of robots in the many online video recordings showing them walking, jumping, grasping at objects, and so on. A tremendous amount of active research and development is taking place to devise humanoid robots. They look comical right now. You watch those videos and laugh when the robot trips over a mere stick lying on the ground, something that a human would seldom trip over. You scoff when a robot tries to grasp a coffee cup and inadvertently spills most of the coffee. It all seems humorous and a silly pursuit. Keep in mind that we are all observing the development process while it is still taking place. At some point, those guffaws of the humanoid robots will lessen. Humanoid robots will be as smooth and graceful as humans. This will continue to be honed. Eventually, humanoid robots will be less prone to physical errors that humans make. In a sense, the physicality of a humanoid robot will be on par with humans, if not better, due to its mechanical properties. Do not discount the coming era of quite physically capable humanoid robots. AGI And Humanoid Robots Pair Up You might remember that in The Wonderful Wizard of Oz, the fictional character known as The Strawman lacked a brain. Without seeming to anthropomorphize humanoid robots, the current situation is that those robots typically use a form of AI that is below the sophistication level of modern generative AI. That’s fine for now due to the need to first ensure that the physical movements of the robots get refined. I have discussed that a said-to-be realm of Physical AI is going to be a huge breakthrough with incredible ramifications, see my analysis at the link here. The idea underlying Physical AI is that the AI of today is being uplifted by doing data training on the physical world. This also tends to include the use of World Models, consisting of broad constructions about how the physical world works, such as that we are bound to operate under conditions of gravity, and other physical laws of nature, see the link here. The bottom line here is that there will be a close pairing of robust AI with humanoid robots. Imagine what a humanoid robot can accomplish if it is paired with AGI. I’ll break the suspense and point out that AGI paired with humanoid robots means that those robots readily enter the blue-collar worker realm. Suppose your plumbing needs fixing. No worries, a humanoid robot that encompasses AGI will be sent to your home. The AGI is astute enough to carry on conversations with you, and the AGI also fully operates the robot to undertake the plumbing tasks. How did the AGI-paired humanoid robot get to your home? Easy-peasy, it drove a car or truck to get there. I’ve previously predicted that all the work on devising autonomous vehicles and self-driving cars will get shaken up once we have suitable humanoid robots devised. There won’t be a need for a vehicle to contain self-driving capabilities. A humanoid robot will simply sit in the driver’s seat and drive the vehicle. This is a much more open-ended solution than having to craft components that go into and onto a vehicle to enable self-driving. See my coverage at the link here. Timing Is Notable One of the reasons that many do not give much thought to the pairing of AGI with humanoid robots is that today’s humanoid robots seem extraordinarily rudimentary and incapable of performing physical dexterity tasks on par with human capabilities. Meanwhile, there is brazen talk that AGI is just around the corner. AGI is said to be within our grasp. Let’s give the timing considerations a bit of scrutiny. There are three primary timing angles: Option 1: AGI first, then humanoid robots. AGI is attained before humanoid robots are sufficiently devised. Option 2: Humanoid robots first, then AGI. Humanoid robots are physically fluently adept before AGI is attained. Option 3: AGI and humanoid robots arrive about at the same time. AGI is attained and at the same time, it turns out that humanoid robots are fluently adept too, mainly by coincidence and not due to any cross-mixing. A skeptic would insist that there is a fourth possibility, consisting of the possibility that we never achieve AGI and/or we fail to achieve sufficiently physically capable humanoid robots. I am going to reject that possibility. Perhaps I am overly optimistic, but it seems to me that we will eventually attain AGI, and we will eventually attain physically capable humanoid robots. I shall next respectively consider each of the three genuinely reasonable possibilities. Option 1: AGI First, Then Humanoid Robots What if we manage to attain AGI before we manage to achieve physically fluent humanoid robots? That’s just fine. We would indubitably put AGI to work as a partner with humans in figuring out how we can push along the budding humanoid robot development process. It seems nearly obvious that with AGI’s capable assistance, we would overcome any bottlenecks and soon enough arrive at top-notch physically adept humanoid robots. At that juncture, we would then toss AGI into the humanoid robots and have ourselves quite an amazing combination. Option 2: Humanoid Robots First, Then AGI Suppose that we devise very physically adept humanoid robots but have not yet arrived at AGI. Are we in a pickle? Nope. We could use conventional advanced AI inside those humanoid robots. The combination would certainly be good enough for a wide variety of tasks. The odds are that we would need to be cautious about where such robots are utilized. Nonetheless, we would have essentially walking, talking, and productive humanoid robots. If AGI never happens, oh well, we end up with pretty good humanoid robots. On the other hand, once we arrive at AGI, those humanoid robots will be stellar. It’s just a matter of time. Option 3: AGI And Humanoid Robots At The Same Time Let’s consider the potential of AGI and humanoid robots perchance being attained around the same time. Assume that this timing isn’t due to an outright cross-mixing with each other. They just so happen to advance on a similar timeline. I tend to believe that’s the most likely of the three scenarios. Here’s why. First, despite all the hubris about AGI being within earshot, perhaps in the next year or two, which is a popular pronouncement by many AI luminaries, I tend to side with recent surveys of AI developers that put the date around the year 2040 (see my coverage at the link here). Some AI luminaires sneakily play with the definition of AGI in hopes of making their predictions come true sooner, akin to moving the goalposts to easily score points. For my coverage on Sam Altman’s efforts of moving the cheese regarding AGI attainment, see the link here. Second, if you are willing to entertain the year 2040 as a potential date for achieving AGI, that’s about 15 years from now. In my estimation, the advancements being made in humanoid robots will readily progress such that by 2040 they will be very physically adept. Probably be sooner, but let’s go with the year 2040 for ease of contemplation. In my view, we will likely have humanoid robots doing well enough that they will be put into use prior to arriving at AGI. The pinnacle of robust humanoid robots and the attainment of AGI will roughly coincide with each other. Two peas in a pod.Impact Of Enormous Consequences In an upcoming column posting, I will examine the enormous consequences of having AGI paired with fully physically capable humanoid robots. As noted above, this will have a humongous impact on white-collar work and blue-collar work. There will be gargantuan economic impacts, societal impacts, cultural impacts, and so on. Some final thoughts for now. A single whammy is already being hotly debated. The debates currently tend to be preoccupied with the loss of white-collar jobs due to the attainment of AGI. A saving grace seems to be that at least blue-collar jobs are going to be around and thriving, even once AGI is attained. The world doesn’t seem overly gloomy if you can cling to the upbeat posture that blue-collar tasks remain intact. The double whammy is a lot more to take in. But the double whammy is the truth. The truth needs to be faced. If you are having doubts as a human about the future, just remember the famous words of Vince Lombardi: “Winners never quit, and quitters never win.” Humankind can handle the double whammy. Stay tuned for my upcoming coverage of what this entails.

House in Palm Springs | © Sydney Turturro via Unsplash Moving from an apartment to a house is a major life milestone. It usually means more space, more responsibility, and more freedom. But unless you plan it right, it can also come with more stress.  Whether upgrading to accommodate a growing family or simply looking for more room to breathe, here are five essential steps to help you move from an apartment to a house confidently and easily. 1. Start with a Clear Plan and Timeline One of the most common mistakes people make when moving from an apartment to a house is underestimating how long it takes. It’s not just about packing up your belongings; it’s about handling logistics, paperwork, and scheduling around daily life.  As soon as you know your moving date, create a moving checklist.  Outline what needs to be done weekly: notifying your landlord, scheduling the elevator if you’re in a high-rise, collecting packing materials, and booking your moving company. Planning ahead helps you avoid last-minute stress and unexpected costs. If possible, give yourself at least 6–8 weeks. That gives you enough time to declutter, coordinate with service providers, and ensure you’re fully prepared for move-in day. The earlier you start, the smoother everything flows. Hiring professional movers early in the process can also secure your preferred date and provide access to helpful services, such as packing, storage, or specialized transportation. With everything scheduled well in advance, you’ll have the peace of mind needed to focus on your new adventure. 2. Downsize Before You Upsize It may sound counterintuitive, but moving to a bigger space doesn’t mean you should bring everything with you.  Over time, we accumulate furniture, clothes, gadgets, and kitchen tools that serve little purpose. And in a small apartment, many of these items might have been crammed into closets or storage bins and forgotten altogether.  Now’s the perfect time to declutter and lighten the load before the move. Start by walking through your apartment and taking stock of everything. Ask yourself what truly adds value to your life and what’s just taking up space. If you haven’t used something in over a year, it’s probably safe to let it go. You can donate, sell, or recycle items as needed. A good rule of thumb is to be ruthless. A cleaner move means a cleaner start in your new home. By purging the excess, you’ll reduce moving costs and arrive at your new house with a fresh mindset. There’s no sense in transporting items you no longer want or need. Instead, you’ll be able to unpack more quickly and enjoy your new space without clutter. 3. Prepare for a Different Kind of Space Living in a house is very different from apartment life. The layout, square footage, and storage options all change, which means your furniture and lifestyle habits may also need to adapt. That cozy loveseat that fits perfectly in your apartment living room might look dwarfed in a larger house.  Before moving, visit the house if possible and take room measurements.  Consider creating a rough floor plan to determine where each piece of furniture will fit. This not only helps your local movers place items on move-in day, but it also ensures you don’t waste time and energy relocating things that won’t work in the new space. Apps and online tools can help you visualize your layout ahead of time. Beyond furniture, also think about what your new home may need.  Will you have a backyard that needs maintenance? A garage that requires storage shelving? An extra guest room or home office that needs furnishing?  While you don’t have to buy everything at once, it’s smart to budget for future purchases so you can comfortably and intentionally grow into your home. 4. Handle Utilities, Address Changes, and Logistics © Peter Thomas via Unsplash © Mitch via Unsplash Unlike apartments, where utilities may be partially covered or managed by the landlord, houses typically require you to set up and manage everything yourself.  This includes electricity, water, gas, internet, trash collection, and sometimes even lawn care services. Don’t wait until the last minute; contact providers at least a week before your move to schedule installation or transfers. At the same time, update your address with your bank, subscription services, and relevant government agencies. This helps ensure you continue to receive important mail and prevents service disruptions. If you’re moving within the same city, this can be fairly straightforward. If you’re moving to a different region or province, however, make sure you check for local utility providers and regional services. Elevator bookings and parking permits are other key details to address, especially when moving out of an apartment in a busy area.  Confirm all building rules and moving hours in advance, and inform your movers so they can plan accordingly. Clear communication on these details makes the moving day smoother for everyone involved. 5. Rely on a Trusted Moving Partner Perhaps the most important step in this process is choosing the right moving company.  Apartment-to-house moves require experience, careful coordination, and physical effort, especially when dealing with tight stairwells, narrow hallways, or long distances from the apartment to the truck.  A professional moving team can handle the logistics efficiently while protecting your belongings from damage. Instead of doing it all yourself, you can count on us to carry the load literally. We bring the right equipment, vehicles, and muscle, so you don’t have to worry about heavy lifting or unexpected delays. More importantly, we offer peace of mind during an exciting and overwhelming time. A good moving experience sets the tone for your new chapter. Let us help make that transition smooth, stress-free, and even enjoyable. Final Word Moving from an apartment to a house is more than just a physical shift; it’s a lifestyle change. With the right planning, thoughtful decisions, and support from experienced movers, you can make the process simple and even fun. Whether it’s your first home or your dream upgrade, we’re here to guide you every step of the way. Frequently Asked Questions  1. How far in advance should I book a moving company when moving from an apartment to a house? We recommend booking your moving company at least 4–6 weeks in advance, especially during peak moving seasons (spring and summer). This gives you the best chance to secure your preferred date and time while also allowing time for proper planning, packing, and coordination with building management if needed. 2. What’s the best way to downsize before moving into a house? Even though you’re moving to a larger space, it’s wise to declutter before your move. Sort items by category, keep, donate, sell, or discard, and be honest about what you actually use. Unused furniture, duplicate kitchenware, and old clothes often don’t need to make the move. A lighter load means a faster, more affordable, and more organized transition. 3. Will all my apartment furniture fit properly in a house?  Some furniture from a compact apartment may not always feel too small or awkward in a larger home. We recommend measuring key pieces and comparing them with the dimensions of the new space before moving. Our team can help you decide what’s worth moving and even assist with layout planning to ensure everything fits where it should. 4. What should I do about utilities when moving into a house?  Unlike apartment living, homeowners are responsible for setting up all their utilities individually. Be sure to contact providers for electricity, water, internet, gas, and waste collection at least a week before your move. Scheduling ahead ensures your new home is move-in ready, and you won’t experience any service interruptions. 5. Do I need professional movers for a short move from an apartment to a house? Even if you’re moving just a few blocks, a professional moving team makes the process faster, safer, and far less stressful. We handle the heavy lifting, stairs, tight corners, and transportation logistics, so you don’t have to. Our experience ensures that your belongings arrive safely, regardless of the distance. GuidesTips by ArchEyes Team Leave a comment

June 5, 20253 min readNew Hires Will Still Leave the NWS Dangerously Understaffed, Meteorologists SayNearly 600 employees left the National Weather Service or were fired in recent months. Meteorologists say 125 expected new hires will still leave the agency dangerously understaffedBy Chelsea Harvey & E&E News A tornado struck communities in Somerset and London, Ky., on May 16, 2025, leaving 19 dead and more injured. Michael Swensen/Getty ImagesCLIMATEWIRE | New hiring efforts at the National Weather Service won’t be enough to overcome staffing shortages and potential risks to human lives this summer, meteorologists warned Wednesday at a panel hosted by Democratic Washington Sen. Maria Cantwell.NOAA will hire around 125 new employees at the NWS, the agency said in an announcement first reported Monday by CNN. But nearly 600 employees have departed the NWS over the last few months, after the Trump administration fired probationary federal employees and offered buyouts and early retirements.That means the new hires will account for less than 25 percent of the total losses.On supporting science journalismIf you're enjoying this article, consider supporting our award-winning journalism by subscribing. By purchasing a subscription you are helping to ensure the future of impactful stories about the discoveries and ideas shaping our world today.“A quarter of the staff are not going to do the job when, let’s just say, both hurricane and fire risks are increasing,” Cantwell said during Wednesday’s panel. “[The Trump administration’s] approach in response to this has been a flimsy Band-Aid over a very massive cut.”Cantwell added that the National Hurricane Center is not fully staffed, as NOAA officials suggested last month when announcing their predictions for the upcoming Atlantic hurricane season outlook. The NHC has at least five vacancies, she said, representing meteorologists and technicians who help build forecasts for tropical cyclones in both the Atlantic and Pacific oceans.Meanwhile, NOAA is predicting above-average activity in the Atlantic this hurricane season. Updated fire maps also suggest that nearly all of Cantwell’s home state of Washington, along with Oregon and large swaths of California, will experience an above-average risk of wildfires by August.Kim Doster, NOAA’s director of communications, did not immediately respond to a request for comment on NOAA’s staffing shortages or the NHC’s vacancies.Three meteorologists speaking on the panel echoed Cantwell’s concerns, suggesting that staffing shortages at weather offices across the country risk forecasting errors and breakdowns in communication between meteorologists and emergency managers.At least eight local weather offices across the country are currently so short-staffed that they can no longer cover their overnight shifts, said Brian LaMarre, a former meteorologist-in-charge at the NWS office in Tampa Bay, Florida. Some of these offices may have to rely on “mutual aid,” or borrowed staff, from other NWS locations to cover their shifts during extreme weather events.But Cantwell and other panelists expressed concern that staff-sharing across the NWS could erode the accuracy of forecasts and warnings for local communities.Cantwell pointed to the meteorologists that specialize in fire weather forecasts. NOAA typically deploys those experts to provide forecasts and recommendations to firefighters on the ground when wildfires strike.“If you think you're gonna substitute somebody that’s gonna be somewhere else — I don’t know where, some other part of the state or some other state — and you think you're gonna give them accurate weather information? It just doesn't work that way,” she said.Washington state-based broadcast meteorologist Jeff Renner echoed her concerns.“The meteorologists that respond to [wildfires] have very specific training and very specific experience that can’t be easily duplicated, particularly from those outside the area,” he said.Meanwhile, LaMarre’s former position in Tampa is vacant, and around 30 other offices across the country are also operating without a permanent meteorologist-in-charge.“That person is the main point of contact when it comes to briefing elected officials, emergency management directors, state governors, city mayors, parish officials,” LaMarre said. “They are the individual that’s gonna be implementing any new change that is needed for hurricane season, blizzards, wildfires, inland flooding.”The NWS suffered from staffing shortages prior to the Trump administration. But LaMarre said he never saw such widespread vacancies, including offices unable to operate overnight, in his 30 years at the agency.He emphasized that NWS meteorologists will do whatever it takes to ensure accurate forecasts when extreme weather strikes. But too many gaps at local offices mean that some services will inevitably suffer, LaMarre added.“Whenever you look at an office that is short-staffed, that means a piece of that larger puzzle is taken away,” he said. “That means some outreach might not be able to occur. Some trainings might not be able to occur. Some briefings to officials might not be able to occur.”Reprinted from E&E News with permission from POLITICO, LLC. Copyright 2025. E&E News provides essential news for energy and environment professionals.

A Peloton perched in the living room. A set of weights on the bedroom floor. Some wellness products have a way of making their presence known. But even the smaller things—think daily supplements, mushroom tinctures, herbal teas—can slowly start to sprawl out everywhere. With the rise and awareness of holistic health habits, wellness routines that rival your skincare shelf, and obsessions like ProteinTok—a whole corner of the internet dedicated to everything protein—you might find that wellness has taken over your kitchen. Suddenly, your blender is battling for space with the hydration powders, collagen tubs, and stacks of snack bars. If you don’t have a place to properly store it all, your kitchen can start to be more overwhelming than calming. But with thoughtful design, proper planning, and smart storage solutions, you can integrate it all into your home in a way that feels serene and seamless. We asked designers and wellness experts how they manage their ever-expanding collection of products and design their kitchens with well-being in mind.Consider An Appliance GarageTessa NeustadtGreen cabinet doors conceal the appliances in this kitchen by Interior Archaeology.“For things that need to be in reach and on the counter, we put everything in an appliance garage,” shares Lynn Kloythanomsup of Landed Interiors and Homes. By that she means is a built-in cabinet or nook—typically integrated into the cabinetry—that features a door that lifts, rolls, or swings open and shut to conceal bulky appliances. Designer Hollie Velten of Spaces by Hollie Velten is also a fan of this feature and notices more clients requesting it. “A custom appliance garage allows things like tea supplies to be accessible for entertaining but hidden for everyday use.”It’s not just designers who advocate for this intentional placement—wellness experts themselves are just as mindful of it. “Our juicer must be on the countertop to make juicing as effortless as possible but other appliances are fine tucked away,” says health coach and nutritionist Daphne Javtich of Doing Well. Kerrilynn Pamer of Cap Beauty echoes this: “I keep my juicer on the counter, I have a Nama, and it’s pretty discreet even though it's large. Everything else, I keep behind doors.”Think Beyond The Main KitchenStacy Zarin GoldbergThis auxiliary kitchen by Kate Abt Design makes a perfect spot for wellness essentials.One luxury feature on the rise? Auxiliary kitchens, also known as dirty kitchens. “When designing for clients, we almost always have the ‘family’ or ‘show’ kitchen and then a second kitchen where the real cooking happens,” says Eric Egan of Eric Egan Interior Design. “This is much like in a restaurant show kitchen, where you see them finishing the meals, but you don't see the prep work or the clean up, all of which happens in the background.” Designer Sarah Barnard of Sarah Barnard Design has also seen an increase in the request of auxiliary kitchens and loves them because they “provide concealed storage for juicers, blenders, dehydrators, and food processors.” While two kitchens might not be realistic for everyone, if you have access to a nice-sized pantry or closet nearby, that’s an ideal spot to corral it all, as well. Rethink Unused SpacesKEVIN MIYAZAKIRemove the booze, bring in the blender, and this liquor cabinet, in a library designed by Kate Marker, could be a wellness station.Speaking of ideal spots for wellness, consider transforming underutilized spaces like liquor cabinets or part of a mudroom into a wellness hub. “We don't find that too many of our clients have a liquor cabinet or use a bar anymore,” shares Kloythanomsup. “So that area can be repurposed as a wellness area.” While you're repurposing it, consider where you can plug in all those wellness appliances. “Clients are also asking us to design technology-stations, so they have multiple areas to hide their technology and free their view of cords and distractions,” Velten says. Get In The ZoneEmma Farrer//Getty ImagesA dedicated tea zone.If you are going to dedicate counter space to your wellness routine, whether it’s a juicing zone, smoothie station, a hydration corner—keep things arranged in groups or zones. “I keep the bulk of my supplements and remedies in a large, shallow pullout drawer in the kitchen,” Javitch shares. “I find this is the easiest way to organize and find products quickly. And you don't have to remove some to get to others.”“I love setting up thoughtful, dedicated zones, like a wellness drawer with teas, vitamins, and tinctures all in one place, or a water station with a glass water pitcher, reusable bottles, and electrolytes,” shares Blakey. Keeping similar items together allows products to stay top of mind and prevents them from getting lost in the shuffle. Contain YourselfCourtesy Holly BlakeyA pantry organized by Holly Blakey of Breathing Room Home.While baskets are a no-brainer for kitchen organization, designers and experts say that’s for good reason, advising homeowners not to overlook them—and to keep the materials as natural as possible. “Wooden bins are another favorite way to add warmth and style while keeping items grouped,” Blakey says. Velten seconds the idea of rush baskets or wooden bins, “We try to push living finishes as much as we can because with proper care, material that came from the earth just vibrates differently.” No matter how many products you use or how dialed-in your routine may be, “wellness becomes part of the daily flow when your space helps you follow through on your intentions,” says Blakey. For that reason, says Javitch, “I always keep a few small baskets in our cabinets with products I often grab for like the kids' sunblock stick or their multivitamin gummies.”Show Off Your Stash Thomas LeonczikHollie Velten designed this kitchen to keep essentials on view. The alternative to hiding things away? Showing them off! “We worked with a client who described her kitchen goals as ‘California health kitchen,’” shares Velten. “We actually removed the upper cabinets to create an easy-to-access corner of shelving to hold glass jars and sustainable practices for her teas, herbs, spices, tinctures, and other food prep essentials.” After all, some items deserve to be seen—not only from an aesthetic perspective but also to prompt daily use and consistency. “I’ll usually keep my essential daily products on a pretty wood tray on the kitchen counter,” Javtich shares.If you are going to keep things out in the open, Bay Area-based organizer of Breathing Room Home Holly Blakey, says clarity is key. “I swear by glass containers for food storage, not just for sustainability, but because they help you know what you have and when you can clearly see your items, you’re more likely to use them before they expire.”Plus, this keep-it-all-out method a way to incorporate your personal preferences and add a little personality into your kitchen. “Sometimes well-kept essentials really only bring more joy and utility when out in the open,” Velten adds. Follow House Beautiful on Instagram and TikTok.

html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd" https://www.cgchannel.com/wp-content/uploads/2025/06/250605_3dsMax20261_AttributeTransfer.mp4 Autodesk has released 3ds Max 2026.1, the latest version of its 3D modelling and animation software for architectural visualization, motion graphics and VFX.The release adds a new Attribute Transfer modifier, for transferring UVs or vertex data between 3D objects, and updates the Push and XForm modifiers. 3D modeling: new Attribute Transfer modifier The new feature in 3ds Max 2026.1 is the Attribute Transfer modifier, shown in the video above.It transfers attributes – vertex positions, normals and colors, plus up to two sets of UVs – from one model to another. According to Autodesk, it provides a “new, non-destructive modifier workflow” for tasks that were typically done through scripting. https://www.cgchannel.com/wp-content/uploads/2025/06/250605_3dsMax20261_PushModifier.mp4 3D modeling and animation: new controls for the Push modifier There are also updates to a couple of the existing modifiers, including the Push modifier, used to inflate or deflate 3D meshes.It gets a number of new options, including the option to use other objects in a scene to limit the result of the push operation. When the result collides with a control object, it stops moving in that direction in real time. A new Relax Iterations setting smooths the mesh in a similar way to the Relax modifier, helping to prevent issues with self-intersection. It is also now possible to limit push operations to specific axes. https://www.cgchannel.com/wp-content/uploads/2025/06/250605_3dsMax20261_XForm.mp4 Layout and animation: new options for the XForm modifier The XForm modifier, used to apply transformations non-destructively to objects, gets a choice of four transformation modes.As well as the previous default behavior, users can now transform objects in local space, world space, or relative to another object in the scene. There is also a self-explanatory new Preserve Normals checkbox. USD for 3ds Max: convert USD geometry to native 3ds Max objects 3ds Max’s Universal Scene Description plugin has been updated, with USD for 3ds Max 0.11 adding a new Promote to 3ds Max Object option. It promotes USD geometry to a 3ds Max object, making it possible to work on it using native 3ds Max tools. In addition, the USD Exporter now supports the OpenPBR material, which has been 3ds Max’s default material since 3ds Max 2026. There are also a number of workflow improvements, and new Python functions for manipulating USD layers. Arnold for 3ds Max: performance improvements 3ds Max’s integration plugin for Autodesk’s Arnold renderer has also been updated, with MAXtoA 5.8.2 supporting the changes in Arnold 7.4.2.They’re primarily performance improvements, especially to scene initialization times when rendering on machines with high numbers of CPU cores. Price and system requirements 3ds Max 2026.1 is compatible with Windows 10+. It is rental-only. Subscriptions cost $255/month, up a further $10/month since 3ds Max 2026, or $2,010/year, up $65/year.In many countries, artists earning under $100,000/year and working on projects valued at under $100,000/year qualify for Indie subscriptions, which now cost $330/year. Read a full list of new features in 3ds Max 2026.1 in the online documentation Have your say on this story by following CG Channel on Facebook, Instagram and X (formerly Twitter). As well as being able to comment on stories, followers of our social media accounts can see videos we don’t post on the site itself, including making-ofs for the latest VFX movies, animations, games cinematics and motion graphics projects.

As a Canadian who has spent the last two and a half years working as an intern architect in Helsinki, these questions have been on my mind. In my current role, I have had the opportunity to participate in numerous architectural competitions arranged by Finnish municipalities and public institutions. It has been my observation that the Finnish system of open, anonymous architectural competitions consistently produces elegant and highly functional public buildings at reasonable cost and at great benefit to the lives of the everyday people for whom the projects are intended to serve. Could Canada benefit from the adoption of a similar model? ‘Public project’ has never been a clearly defined term and may bring to mind the image of a bustling library for some while conjuring the image of a municipal power substation for others. In the context of this discussion, I will use the term to refer to projects that are explicitly in-service of the broader public such as community centres, museums, and other cultural venues. Finland’s architectural competition system Frequented by nearly 2 million visitors per year, the Oodi Central Library in Helsinki, Finland, has become a thriving cultural hub and an internationally recognized symbol of Finnish design innovation. Designed by ALA Architects, the project was procured through a 2-stage, open, international architectural competition. Photo by Ninara (flickr, CC BY 2.0) In Finland, most notable public projects begin with an architectural competition. Some are limited to invited participants only, but the majority of these competitions are open to international submissions. Importantly, the authors of any given proposal remain anonymous with regards to the jury. This ensures that all proposals are evaluated purely on quality without bias towards established firms over lesser known competitors. The project budget is known in advance to the competition entrants and cost feasibility is an important factor weighed by the jury. However, the cost for the design services to be procured from the winning entry is fixed ahead of time, preventing companies from lowballing offers in the hopes of securing an interesting commission despite the inevitable compromises in quality that come with under-resourced design work. The result: inspired, functional public spaces are the norm, not the exception. Contrasted against the sea of forgettable public architecture to be found in cities large and small across Canada, the Finnish model paints a utopic picture. Several award-winning projects in my current place of employment in Helsinki have been the result of successes in open architectural competitions. The origin of the firm itself stemmed from a winning competition entry for a church in a small village submitted by the firm’s founder while he was still completing his architectural studies.  At that time, many architecture firms in Finland were founded in this manner with the publicity of a competition win serving as a career launching off point for young architects. While less common today, many students and recent graduates still participate in these design competitions. On the occasion that a young practitioner wins a competition, they are required to assemble a team with the necessary expertise and qualifications to satisfy the requirements of the jury. I believe there is a direct link between the high architectural quality outcomes of these competitions and the fact that they are conducted anonymously. The opening of these competitions to submissions from companies outside of Finland further enhances the diversity of entries and fosters international interest in the goings-on of Finland’s architectural scene. Nonetheless, it is worth acknowledging that exemplary projects have also resulted from invited and privately organized competitions. Ultimately, the mindset of the client, the selection of an appropriate jury, and the existence of sufficient incentives for architects to invest significant time in their proposals play a more critical role in shaping the quality of the final outcome. Tikkurila Church and Housing in Vantaa, Finland, hosts a diverse range of functions including a café, community event spaces and student housing. Designed by OOPEAA in collaboration with a local builder, the project was realized as the result of a competition organized by local Finnish and Swedish parishes. Photo by Marc Goodwin Finland’s competition system, administered by the Finnish Association of Architects (SAFA), is not limited to major public projects such as museums, libraries and city halls. A significant number of idea competitions are organized seeking compelling visions for urban masterplans. The quality of this system has received international recognition. To quote a research paper from a Swedish university on the structure, criteria and judgement process of Finnish architectural competitions, “The Finnish (competition) experience can provide a rich information source for scholars and students studying the structure and process of competition system and architectural judgement, as well as those concerned with commissioning and financing of competitions due to innovative solutions found in the realms of urban revitalization, poverty elimination, environmental pollution, cultural and socio-spatial renewals, and democratization of design and planning process.” This has not gone entirely under the radar in Canada. According to the website of the Royal Architectural Institute of Canada (RAIC), “Competitions are common in countries such as Finland, Ireland, the United Kingdom, Australia, and New Zealand. These competitions have resulted in a high quality of design as well as creating public interest in the role of architecture in national and community life.” Canada’s architectural competition system In Canada, the RAIC sets general competition guidelines while provincial and territorial architect associations are typically responsible for the oversight of any endorsed architectural competition. Although the idea of implementing European architectural competition models has been gaining traction in recent years, competitions remain relatively rare even for significant public projects. While Canada is yet to fully embrace competition systems as a powerful tool for ensuring higher quality public spaces, success stories from various corners of the country have opened up constructive conversations. In Edmonton, unconventional, competitive procurement efforts spearheaded by city architect Carol Belanger have produced some remarkable public buildings. This has not gone unnoticed in other parts of the country where consistent banality is the norm for public projects. Jasper Place Branch Library designed by HCMA and Dub Architects is one of several striking projects in Edmonton built under reimagined commissioning processes which broaden the pool of design practices eligible to participate and give greater weight to design quality as an evaluation criterion. Photo by Hubert Kang The wider applicability of competition systems as a positive mechanism for securing better public architecture has also started to receive broader discussion. In my hometown of Ottawa, this system has been used to procure several powerful monuments and, more recently, to select a design for the redevelopment of a key city block across from Parliament Hill. The volume and quality of entries, including from internationally renowned architectural practices, attests to the strengths of the open competition format. Render of the winning entry for the Block 2 Redevelopment in Ottawa. This 2-stage competition was overseen directly by the RAIC. Design and render by Zeidler Architecture Inc. in cooperation with David Chipperfield Architects. Despite these successes, there is significant room for improvement. A key barrier to wider adoption of competition practices according to the RAIC is “…that potential sponsors are not familiar with competitions or may consider the competition process to be complicated, expensive, and time consuming.” This is understandable for private actors, but an unsatisfactory answer in the case of public, tax-payer funded projects. Finland’s success has come through the normalization of competitions for public project procurement. We should endeavour to do the same. Maintaining design contribution anonymity prior to jury decision has thus far been the exception, not the norm in Canada. This reduces the credibility of the jury without improving the result. Additionally, the financing of such competitions has been piece-meal and inconsistent. For example, several world-class schools have been realized in Quebec as the result of competitions funded by a provincial investment.  With the depletion of that fund, it is no longer clear if any further schools will be commissioned in Quebec under a similar model. While high quality documentation has been produced, there is a risk that developed expertise will be lost if the team of professionals responsible for overseeing the process is not retained. École du Zénith in Shefford, Quebec, designed by Pelletier de Fontenay + Leclerc Architectes is one of six elegant and functional schools commission by the province through an anonymous competition process. Photo by James Brittain A path forward Now more than ever, it is essential that our public projects instill in us a sense of pride and reflect our uniquely Canadian values. This will continue to be a rare occurrence until more ambitious measures are taken to ensure the consistent realization of beautiful, innovative and functional public spaces that connect us with one another. In service of this objective, Canada should incentivize architectural competitions by normalizing their use for major public projects such as national museums, libraries and cultural centres. A dedicated Competitions Fund could be established to support provinces, territories and cities who demonstrate initiative in the pursuit of more ambitious, inspiring and equitable public projects. A National Competitions Expert could be appointed to ensure retention and dissemination of expertise. Maintaining the anonymity of competition entrants should be established as the norm. At a moment when talk of removing inter-provincial trade barriers has re-entered public discourse, why not consider striking down red tape that prevents out-of-province firms from participating in architectural competitions? Alas, one can dream. Competitions are no silver bullet. However, recent trials within our borders should give us confidence that architectural competitions are a relatively low-risk, high-reward proposition. To this end, Finland’s open, anonymous competition system offers a compelling case study from which we would be well served to take inspiration. Isaac Edmonds is a Canadian working for OOPEAA – Office for Peripheral Architecture in Helsinki, Finland. My observations of the Finnish competition system’s ability to consistently produce functional, beautiful buildings inform my interest in procurement methods that elevate the quality of our shared public realm. The post Op-Ed: Could Canada benefit from adopting Finland’s architectural competition system? appeared first on Canadian Architect.

Macworld If you’re an Apple user we already know you like the finer things in life, and we’d put money on the fact your iPhone is controlling half the gadgets in your home. Why? Well, why not. It just works, and this seamless integration with smart home kit frees up your time and removes many of the frustrations of everyday life. But there is one smart gadget you might not have considered yet, and this robot can take care of the most gruelling chore of all: cleaning out the pool. Investing in a robot pool cleaner is a smart choice. Imagine being able to enjoy the luxury of a swimming pool, but with none of the hard work pool maintenance typically requires. The Dreame Z1 Pro is a great pick, unlocking plenty of extra free time to actually enjoy your pool. Imagine this: you’ve spent a very loooong week at the office, but now it’s Saturday, the weather has warmed up, and you can’t think of anything better than spending the weekend lounging in the pool you worked so hard to pay for. You grab a towel, get into your swimsuit, oil up… and then start picking out leaves that have fallen into the water. Oh, and here are some bugs, let’s get rid of those. And we’ll tackle that nice slimey film on top of the water. Did you scrub the pool walls and floors lately? Suddenly this luxurious dip you had been longing for feels like hassle. Let Dreame take the hard work out of pool maintenance It doesn’t have to be this way. Dreame can help, and the Z1 Pro ensures you enjoy hands-off pool maintenance anytime you need it. It deploys all of its 8,000GPH suction power to clean your pool top to bottom, picking up anything that’s fallen in the water and scrubbing the waterline. Much like a robot vacuum will tackle cleaning your floors, this one will stick to the bottom or sides of the pool and meticulously clean the surface, too. The robot’s sensors will quickly map out the pool while AI smarts divide it into areas so it can better tackle cleaning. The Z1 Pro even knows how to avoid obstacles such as drain covers, lights, and so on. This wireless robot pool cleaner can run for about 180 minutes on a single charge, cleaning up to 2,160 square feet in the process. That’s quite a lot of pool to cover! While it can normally do its own thing and clean wherever it deems necessary, you can also assume full control right from your iPhone or the bundled remote. Hands-free pool cleaning If you’re running an emergency clean just before guests arrive and you don’t want them to see the robot, use the remote to call it back to you. This LiFi-connected remote is suitable for fresh- and saltwater pools and can communicate with the robot even while it’s underwater, allowing you to assign tasks or steer the cleaner. Once the cleaning job is done, the robot will park itself at the edge of the pool so you can pick it up and set it up to recharge. Easy! To set up the robot and get cleaning reports, also install the Dreamehome app on your iPhone. You’ll see everything from the map to the multiple cleaning modes available, as well as the cleaning logs. What are you waiting for? Dreame’s Z1 Pro costs $1,499 at Dreame’s online shop, but right now it’s discounted to $1,099–and you can save a further 15% with the code PROMO15. We think you might just find the time saved on pool maintenance is worth more to you than the discount, however. Take a further 15% off Dreame Z1 Pro Use Promo Code PROMO15