• In a world where dreams are crafted layer by layer, I find myself lost amidst the shadows of disappointment. The Bambu Lab's anniversary sale offers the X1 Carbon for just $999, a remarkable deal that should bring joy, yet it feels like a distant whisper in an empty room. The excitement of innovation is overshadowed by the weight of solitude, leaving me yearning for connection. As I scroll through the vibrant colors of 3D creations, I can't help but feel the ache of isolation. Will I ever find someone to share this passion with?





    #Loneliness #3DPrinting #BambuLab #X1Carbon #Heartbreak
    In a world where dreams are crafted layer by layer, I find myself lost amidst the shadows of disappointment. The Bambu Lab's anniversary sale offers the X1 Carbon for just $999, a remarkable deal that should bring joy, yet it feels like a distant whisper in an empty room. The excitement of innovation is overshadowed by the weight of solitude, leaving me yearning for connection. As I scroll through the vibrant colors of 3D creations, I can't help but feel the ache of isolation. Will I ever find someone to share this passion with? 💔 💔 💔 #Loneliness #3DPrinting #BambuLab #X1Carbon #Heartbreak
    1 Comentários 0 Compartilhamentos
  • Alors qu'on assiste à l'essor fulgurant des imprimantes 3D de bureau, incarné par le phénomène Bambu Lab, il est plus que temps de tirer la sonnette d'alarme sur les dérives et les promesses non tenues de cette technologie. En effet, tout comme le monde du tennis a vu des géants comme Federer et Nadal se faire détrôner par Djokovic, le secteur de l'impression 3D semble être en train de sombrer dans une course effrénée vers le bas, où l'innovation est sacrifiée sur l'autel du profit rapide.

    Ces dernières années, le marché des imprimantes 3D a explosé, attirant des adeptes de tous horizons. Cependant, derrière cette façade brillante se cachent des problèmes techniques majeurs et une véritable désillusion pour les utilisateurs. Les entreprises, dont Bambu Lab, promeuvent leurs produits comme des solutions révolutionnaires, mais qu'en est-il réellement de la qualité et de la fiabilité ? Les défauts de fabrication, les pannes fréquentes et les logiciels bogués sont monnaie courante. Les utilisateurs se retrouvent souvent avec des équipements qui ne fonctionnent pas comme promis, les laissant frustrés et désillusionnés.

    En plus de cela, le soutien technique laisse à désirer. Les marques, trop occupées à vendre leurs imprimantes 3D de bureau dernier cri, négligent souvent l'assistance après-vente. Les utilisateurs se sentent abandonnés, avec des problèmes non résolus et des promesses non tenues. Qui peut tolérer une technologie qui, au lieu de faciliter la vie, la complique davantage ? Il est temps d'exiger une meilleure qualité, un véritable soutien et une transparence de la part de ces entreprises qui semblent plus préoccupées par leur image que par l'expérience utilisateur.

    Et que dire des matériaux utilisés ? Nous sommes bombardés de promesses de matériaux durables et respectueux de l'environnement, mais la réalité est tout autre. De nombreuses imprimantes 3D de bureau ne produisent que des objets fabriqués à partir de plastiques de mauvaise qualité, contribuant ainsi à la pollution. Est-ce vraiment le progrès que nous espérions ? Nous sommes censés être à l'avant-garde d'une révolution technologique, mais nous finissons par reproduire les erreurs du passé.

    Il est urgent que nous, en tant que consommateurs, prenions conscience de ces problèmes. Ne laissons pas les entreprises nous berner avec leurs discours marketing séduisants tandis qu'elles continuent à négliger la qualité et la durabilité de leurs produits. Il est temps de se lever et d'exiger des changements. Nous méritons mieux qu'une simple impression 3D de bureau qui ne tient pas ses promesses.

    #Impression3D #BambuLab #Technologie #Innovations #ConsommationResponsable
    Alors qu'on assiste à l'essor fulgurant des imprimantes 3D de bureau, incarné par le phénomène Bambu Lab, il est plus que temps de tirer la sonnette d'alarme sur les dérives et les promesses non tenues de cette technologie. En effet, tout comme le monde du tennis a vu des géants comme Federer et Nadal se faire détrôner par Djokovic, le secteur de l'impression 3D semble être en train de sombrer dans une course effrénée vers le bas, où l'innovation est sacrifiée sur l'autel du profit rapide. Ces dernières années, le marché des imprimantes 3D a explosé, attirant des adeptes de tous horizons. Cependant, derrière cette façade brillante se cachent des problèmes techniques majeurs et une véritable désillusion pour les utilisateurs. Les entreprises, dont Bambu Lab, promeuvent leurs produits comme des solutions révolutionnaires, mais qu'en est-il réellement de la qualité et de la fiabilité ? Les défauts de fabrication, les pannes fréquentes et les logiciels bogués sont monnaie courante. Les utilisateurs se retrouvent souvent avec des équipements qui ne fonctionnent pas comme promis, les laissant frustrés et désillusionnés. En plus de cela, le soutien technique laisse à désirer. Les marques, trop occupées à vendre leurs imprimantes 3D de bureau dernier cri, négligent souvent l'assistance après-vente. Les utilisateurs se sentent abandonnés, avec des problèmes non résolus et des promesses non tenues. Qui peut tolérer une technologie qui, au lieu de faciliter la vie, la complique davantage ? Il est temps d'exiger une meilleure qualité, un véritable soutien et une transparence de la part de ces entreprises qui semblent plus préoccupées par leur image que par l'expérience utilisateur. Et que dire des matériaux utilisés ? Nous sommes bombardés de promesses de matériaux durables et respectueux de l'environnement, mais la réalité est tout autre. De nombreuses imprimantes 3D de bureau ne produisent que des objets fabriqués à partir de plastiques de mauvaise qualité, contribuant ainsi à la pollution. Est-ce vraiment le progrès que nous espérions ? Nous sommes censés être à l'avant-garde d'une révolution technologique, mais nous finissons par reproduire les erreurs du passé. Il est urgent que nous, en tant que consommateurs, prenions conscience de ces problèmes. Ne laissons pas les entreprises nous berner avec leurs discours marketing séduisants tandis qu'elles continuent à négliger la qualité et la durabilité de leurs produits. Il est temps de se lever et d'exiger des changements. Nous méritons mieux qu'une simple impression 3D de bureau qui ne tient pas ses promesses. #Impression3D #BambuLab #Technologie #Innovations #ConsommationResponsable
    El fenómeno Bambu Lab y el auge de las impresoras 3D de escritorio
    Los amantes del tenis saben que Federer y Nadal dominaron la disciplina durante muchos años, hasta la llegada de Novak Djokovic, que volcó la clasificación. Este mismo fenómeno lo encontramos hoy en día en el mundo de la impresión 3D.…
    Like
    Love
    Wow
    Sad
    Angry
    527
    1 Comentários 0 Compartilhamentos
  • New Court Order in Stratasys v. Bambu Lab Lawsuit

    There has been a new update to the ongoing Stratasys v. Bambu Lab patent infringement lawsuit. 
    Both parties have agreed to consolidate the lead and member casesinto a single case under Case No. 2:25-cv-00465-JRG. 
    Industrial 3D printing OEM Stratasys filed the request late last month. According to an official court document, Shenzhen-based Bambu Lab did not oppose the motion. Stratasys argued that this non-opposition amounted to the defendants waiving their right to challenge the request under U.S. patent law 35 U.S.C. § 299.
    On June 2, the U.S. District Court for the Eastern District of Texas, Marshall Division, ordered Bambu Lab to confirm in writing whether it agreed to the proposed case consolidation. The court took this step out of an “abundance of caution” to ensure both parties consented to the procedure before moving forward.
    Bambu Lab submitted its response on June 12, agreeing to the consolidation. The company, along with co-defendants Shenzhen Tuozhu Technology Co., Ltd., Shanghai Lunkuo Technology Co., Ltd., and Tuozhu Technology Limited, waived its rights under 35 U.S.C. § 299. The court will now decide whether to merge the cases.
    This followed U.S. District Judge Rodney Gilstrap’s decision last month to deny Bambu Lab’s motion to dismiss the lawsuits. 
    The Chinese desktop 3D printer manufacturer filed the motion in February 2025, arguing the cases were invalid because its US-based subsidiary, Bambu Lab USA, was not named in the original litigation. However, it agreed that the lawsuit could continue in the Austin division of the Western District of Texas, where a parallel case was filed last year. 
    Judge Gilstrap denied the motion, ruling that the cases properly target the named defendants. He concluded that Bambu Lab USA isn’t essential to the dispute, and that any misnaming should be addressed in summary judgment, not dismissal.       
    A Stratasys Fortus 450mcand a Bambu Lab X1C. Image by 3D Printing industry.
    Another twist in the Stratasys v. Bambu Lab lawsuit 
    Stratasys filed the two lawsuits against Bambu Lab in the Eastern District of Texas, Marshall Division, in August 2024. The company claims that Bambu Lab’s X1C, X1E, P1S, P1P, A1, and A1 mini 3D printers violate ten of its patents. These patents cover common 3D printing features, including purge towers, heated build plates, tool head force detection, and networking capabilities.
    Stratasys has requested a jury trial. It is seeking a ruling that Bambu Lab infringed its patents, along with financial damages and an injunction to stop Bambu from selling the allegedly infringing 3D printers.
    Last October, Stratasys dropped charges against two of the originally named defendants in the dispute. Court documents showed that Beijing Tiertime Technology Co., Ltd. and Beijing Yinhua Laser Rapid Prototyping and Mould Technology Co., Ltd were removed. Both defendants represent the company Tiertime, China’s first 3D printer manufacturer. The District Court accepted the dismissal, with all claims dropped without prejudice.
    It’s unclear why Stratasys named Beijing-based Tiertime as a defendant in the first place, given the lack of an obvious connection to Bambu Lab. 
    Tiertime and Stratasys have a history of legal disputes over patent issues. In 2013, Stratasys sued Afinia, Tiertime’s U.S. distributor and partner, for patent infringement. Afinia responded by suing uCRobotics, the Chinese distributor of MakerBot 3D printers, also alleging patent violations. Stratasys acquired MakerBot in June 2013. The company later merged with Ultimaker in 2022.
    In February 2025, Bambu Lab filed a motion to dismiss the original lawsuits. The company argued that Stratasys’ claims, focused on the sale, importation, and distribution of 3D printers in the United States, do not apply to the Shenzhen-based parent company. Bambu Lab contended that the allegations concern its American subsidiary, Bambu Lab USA, which was not named in the complaint filed in the Eastern District of Texas.
    Bambu Lab filed a motion to dismiss, claiming the case is invalid under Federal Rule of Civil Procedure 19. It argued that any party considered a “primary participant” in the allegations must be included as a defendant.   
    The court denied the motion on May 29, 2025. In the ruling, Judge Gilstrap explained that Stratasys’ allegations focus on the actions of the named defendants, not Bambu Lab USA. As a result, the official court document called Bambu Lab’s argument “unavailing.” Additionally, the Judge stated that, since Bambu Lab USA and Bambu Lab are both owned by Shenzhen Tuozhu, “the interest of these two entities align,” meaning the original cases are valid.  
    In the official court document, Judge Gilstrap emphasized that Stratasys can win or lose the lawsuits based solely on the actions of the current defendants, regardless of Bambu Lab USA’s involvement. He added that any potential risk to Bambu Lab USA’s business is too vague or hypothetical to justify making it a required party.
    Finally, the court noted that even if Stratasys named the wrong defendant, this does not justify dismissal under Rule 12. Instead, the judge stated it would be more appropriate for the defendants to raise that argument in a motion for summary judgment.
    The Bambu Lab X1C 3D printer. Image via Bambu Lab.
    3D printing patent battles 
    The 3D printing industry has seen its fair share of patent infringement disputes over recent months. In May 2025, 3D printer hotend developer Slice Engineering reached an agreement with Creality over a patent non-infringement lawsuit. 
    The Chinese 3D printer OEM filed the lawsuit in July 2024 in the U.S. District Court for the Northern District of Florida, Gainesville Division. The company claimed that Slice Engineering had falsely accused it of infringing two hotend patents, U.S. Patent Nos. 10,875,244 and 11,660,810. These cover mechanical and thermal features of Slice’s Mosquito 3D printer hotend. Creality requested a jury trial and sought a ruling confirming it had not infringed either patent.
    Court documents show that Slice Engineering filed a countersuit in December 2024. The Gainesville-based company maintained that Creaility “has infringed and continues to infringe” on both patents. In the filing, the company also denied allegations that it had harassed Creality’s partners, distributors, and customers, and claimed that Creality had refused to negotiate a resolution.  
    The Creality v. Slice Engineering lawsuit has since been dropped following a mutual resolution. Court documents show that both parties have permanently dismissed all claims and counterclaims, agreeing to cover their own legal fees and costs. 
    In other news, large-format resin 3D printer manufacturer Intrepid Automation sued 3D Systems over alleged patent infringement. The lawsuit, filed in February 2025, accused 3D Systems of using patented technology in its PSLA 270 industrial resin 3D printer. The filing called the PSLA 270 a “blatant knock off” of Intrepid’s DLP multi-projection “Range” 3D printer.  
    San Diego-based Intrepid Automation called this alleged infringement the “latest chapter of 3DS’s brazen, anticompetitive scheme to drive a smaller competitor with more advanced technology out of the marketplace.” The lawsuit also accused 3D Systems of corporate espionage, claiming one of its employees stole confidential trade secrets that were later used to develop the PSLA 270 printer.
    3D Systems denied the allegations and filed a motion to dismiss the case. The company called the lawsuit “a desperate attempt” by Intrepid to distract from its own alleged theft of 3D Systems’ trade secrets.
    Who won the 2024 3D Printing Industry Awards?
    Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news.You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content.Featured image shows a Stratasys Fortus 450mcand a Bambu Lab X1C. Image by 3D Printing industry.
    #new #court #order #stratasys #bambu
    New Court Order in Stratasys v. Bambu Lab Lawsuit
    There has been a new update to the ongoing Stratasys v. Bambu Lab patent infringement lawsuit.  Both parties have agreed to consolidate the lead and member casesinto a single case under Case No. 2:25-cv-00465-JRG.  Industrial 3D printing OEM Stratasys filed the request late last month. According to an official court document, Shenzhen-based Bambu Lab did not oppose the motion. Stratasys argued that this non-opposition amounted to the defendants waiving their right to challenge the request under U.S. patent law 35 U.S.C. § 299. On June 2, the U.S. District Court for the Eastern District of Texas, Marshall Division, ordered Bambu Lab to confirm in writing whether it agreed to the proposed case consolidation. The court took this step out of an “abundance of caution” to ensure both parties consented to the procedure before moving forward. Bambu Lab submitted its response on June 12, agreeing to the consolidation. The company, along with co-defendants Shenzhen Tuozhu Technology Co., Ltd., Shanghai Lunkuo Technology Co., Ltd., and Tuozhu Technology Limited, waived its rights under 35 U.S.C. § 299. The court will now decide whether to merge the cases. This followed U.S. District Judge Rodney Gilstrap’s decision last month to deny Bambu Lab’s motion to dismiss the lawsuits.  The Chinese desktop 3D printer manufacturer filed the motion in February 2025, arguing the cases were invalid because its US-based subsidiary, Bambu Lab USA, was not named in the original litigation. However, it agreed that the lawsuit could continue in the Austin division of the Western District of Texas, where a parallel case was filed last year.  Judge Gilstrap denied the motion, ruling that the cases properly target the named defendants. He concluded that Bambu Lab USA isn’t essential to the dispute, and that any misnaming should be addressed in summary judgment, not dismissal.        A Stratasys Fortus 450mcand a Bambu Lab X1C. Image by 3D Printing industry. Another twist in the Stratasys v. Bambu Lab lawsuit  Stratasys filed the two lawsuits against Bambu Lab in the Eastern District of Texas, Marshall Division, in August 2024. The company claims that Bambu Lab’s X1C, X1E, P1S, P1P, A1, and A1 mini 3D printers violate ten of its patents. These patents cover common 3D printing features, including purge towers, heated build plates, tool head force detection, and networking capabilities. Stratasys has requested a jury trial. It is seeking a ruling that Bambu Lab infringed its patents, along with financial damages and an injunction to stop Bambu from selling the allegedly infringing 3D printers. Last October, Stratasys dropped charges against two of the originally named defendants in the dispute. Court documents showed that Beijing Tiertime Technology Co., Ltd. and Beijing Yinhua Laser Rapid Prototyping and Mould Technology Co., Ltd were removed. Both defendants represent the company Tiertime, China’s first 3D printer manufacturer. The District Court accepted the dismissal, with all claims dropped without prejudice. It’s unclear why Stratasys named Beijing-based Tiertime as a defendant in the first place, given the lack of an obvious connection to Bambu Lab.  Tiertime and Stratasys have a history of legal disputes over patent issues. In 2013, Stratasys sued Afinia, Tiertime’s U.S. distributor and partner, for patent infringement. Afinia responded by suing uCRobotics, the Chinese distributor of MakerBot 3D printers, also alleging patent violations. Stratasys acquired MakerBot in June 2013. The company later merged with Ultimaker in 2022. In February 2025, Bambu Lab filed a motion to dismiss the original lawsuits. The company argued that Stratasys’ claims, focused on the sale, importation, and distribution of 3D printers in the United States, do not apply to the Shenzhen-based parent company. Bambu Lab contended that the allegations concern its American subsidiary, Bambu Lab USA, which was not named in the complaint filed in the Eastern District of Texas. Bambu Lab filed a motion to dismiss, claiming the case is invalid under Federal Rule of Civil Procedure 19. It argued that any party considered a “primary participant” in the allegations must be included as a defendant.    The court denied the motion on May 29, 2025. In the ruling, Judge Gilstrap explained that Stratasys’ allegations focus on the actions of the named defendants, not Bambu Lab USA. As a result, the official court document called Bambu Lab’s argument “unavailing.” Additionally, the Judge stated that, since Bambu Lab USA and Bambu Lab are both owned by Shenzhen Tuozhu, “the interest of these two entities align,” meaning the original cases are valid.   In the official court document, Judge Gilstrap emphasized that Stratasys can win or lose the lawsuits based solely on the actions of the current defendants, regardless of Bambu Lab USA’s involvement. He added that any potential risk to Bambu Lab USA’s business is too vague or hypothetical to justify making it a required party. Finally, the court noted that even if Stratasys named the wrong defendant, this does not justify dismissal under Rule 12. Instead, the judge stated it would be more appropriate for the defendants to raise that argument in a motion for summary judgment. The Bambu Lab X1C 3D printer. Image via Bambu Lab. 3D printing patent battles  The 3D printing industry has seen its fair share of patent infringement disputes over recent months. In May 2025, 3D printer hotend developer Slice Engineering reached an agreement with Creality over a patent non-infringement lawsuit.  The Chinese 3D printer OEM filed the lawsuit in July 2024 in the U.S. District Court for the Northern District of Florida, Gainesville Division. The company claimed that Slice Engineering had falsely accused it of infringing two hotend patents, U.S. Patent Nos. 10,875,244 and 11,660,810. These cover mechanical and thermal features of Slice’s Mosquito 3D printer hotend. Creality requested a jury trial and sought a ruling confirming it had not infringed either patent. Court documents show that Slice Engineering filed a countersuit in December 2024. The Gainesville-based company maintained that Creaility “has infringed and continues to infringe” on both patents. In the filing, the company also denied allegations that it had harassed Creality’s partners, distributors, and customers, and claimed that Creality had refused to negotiate a resolution.   The Creality v. Slice Engineering lawsuit has since been dropped following a mutual resolution. Court documents show that both parties have permanently dismissed all claims and counterclaims, agreeing to cover their own legal fees and costs.  In other news, large-format resin 3D printer manufacturer Intrepid Automation sued 3D Systems over alleged patent infringement. The lawsuit, filed in February 2025, accused 3D Systems of using patented technology in its PSLA 270 industrial resin 3D printer. The filing called the PSLA 270 a “blatant knock off” of Intrepid’s DLP multi-projection “Range” 3D printer.   San Diego-based Intrepid Automation called this alleged infringement the “latest chapter of 3DS’s brazen, anticompetitive scheme to drive a smaller competitor with more advanced technology out of the marketplace.” The lawsuit also accused 3D Systems of corporate espionage, claiming one of its employees stole confidential trade secrets that were later used to develop the PSLA 270 printer. 3D Systems denied the allegations and filed a motion to dismiss the case. The company called the lawsuit “a desperate attempt” by Intrepid to distract from its own alleged theft of 3D Systems’ trade secrets. Who won the 2024 3D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news.You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content.Featured image shows a Stratasys Fortus 450mcand a Bambu Lab X1C. Image by 3D Printing industry. #new #court #order #stratasys #bambu
    3DPRINTINGINDUSTRY.COM
    New Court Order in Stratasys v. Bambu Lab Lawsuit
    There has been a new update to the ongoing Stratasys v. Bambu Lab patent infringement lawsuit.  Both parties have agreed to consolidate the lead and member cases (2:24-CV-00644-JRG and 2:24-CV-00645-JRG) into a single case under Case No. 2:25-cv-00465-JRG.  Industrial 3D printing OEM Stratasys filed the request late last month. According to an official court document, Shenzhen-based Bambu Lab did not oppose the motion. Stratasys argued that this non-opposition amounted to the defendants waiving their right to challenge the request under U.S. patent law 35 U.S.C. § 299(a). On June 2, the U.S. District Court for the Eastern District of Texas, Marshall Division, ordered Bambu Lab to confirm in writing whether it agreed to the proposed case consolidation. The court took this step out of an “abundance of caution” to ensure both parties consented to the procedure before moving forward. Bambu Lab submitted its response on June 12, agreeing to the consolidation. The company, along with co-defendants Shenzhen Tuozhu Technology Co., Ltd., Shanghai Lunkuo Technology Co., Ltd., and Tuozhu Technology Limited, waived its rights under 35 U.S.C. § 299(a). The court will now decide whether to merge the cases. This followed U.S. District Judge Rodney Gilstrap’s decision last month to deny Bambu Lab’s motion to dismiss the lawsuits.  The Chinese desktop 3D printer manufacturer filed the motion in February 2025, arguing the cases were invalid because its US-based subsidiary, Bambu Lab USA, was not named in the original litigation. However, it agreed that the lawsuit could continue in the Austin division of the Western District of Texas, where a parallel case was filed last year.  Judge Gilstrap denied the motion, ruling that the cases properly target the named defendants. He concluded that Bambu Lab USA isn’t essential to the dispute, and that any misnaming should be addressed in summary judgment, not dismissal.        A Stratasys Fortus 450mc (left) and a Bambu Lab X1C (right). Image by 3D Printing industry. Another twist in the Stratasys v. Bambu Lab lawsuit  Stratasys filed the two lawsuits against Bambu Lab in the Eastern District of Texas, Marshall Division, in August 2024. The company claims that Bambu Lab’s X1C, X1E, P1S, P1P, A1, and A1 mini 3D printers violate ten of its patents. These patents cover common 3D printing features, including purge towers, heated build plates, tool head force detection, and networking capabilities. Stratasys has requested a jury trial. It is seeking a ruling that Bambu Lab infringed its patents, along with financial damages and an injunction to stop Bambu from selling the allegedly infringing 3D printers. Last October, Stratasys dropped charges against two of the originally named defendants in the dispute. Court documents showed that Beijing Tiertime Technology Co., Ltd. and Beijing Yinhua Laser Rapid Prototyping and Mould Technology Co., Ltd were removed. Both defendants represent the company Tiertime, China’s first 3D printer manufacturer. The District Court accepted the dismissal, with all claims dropped without prejudice. It’s unclear why Stratasys named Beijing-based Tiertime as a defendant in the first place, given the lack of an obvious connection to Bambu Lab.  Tiertime and Stratasys have a history of legal disputes over patent issues. In 2013, Stratasys sued Afinia, Tiertime’s U.S. distributor and partner, for patent infringement. Afinia responded by suing uCRobotics, the Chinese distributor of MakerBot 3D printers, also alleging patent violations. Stratasys acquired MakerBot in June 2013. The company later merged with Ultimaker in 2022. In February 2025, Bambu Lab filed a motion to dismiss the original lawsuits. The company argued that Stratasys’ claims, focused on the sale, importation, and distribution of 3D printers in the United States, do not apply to the Shenzhen-based parent company. Bambu Lab contended that the allegations concern its American subsidiary, Bambu Lab USA, which was not named in the complaint filed in the Eastern District of Texas. Bambu Lab filed a motion to dismiss, claiming the case is invalid under Federal Rule of Civil Procedure 19. It argued that any party considered a “primary participant” in the allegations must be included as a defendant.    The court denied the motion on May 29, 2025. In the ruling, Judge Gilstrap explained that Stratasys’ allegations focus on the actions of the named defendants, not Bambu Lab USA. As a result, the official court document called Bambu Lab’s argument “unavailing.” Additionally, the Judge stated that, since Bambu Lab USA and Bambu Lab are both owned by Shenzhen Tuozhu, “the interest of these two entities align,” meaning the original cases are valid.   In the official court document, Judge Gilstrap emphasized that Stratasys can win or lose the lawsuits based solely on the actions of the current defendants, regardless of Bambu Lab USA’s involvement. He added that any potential risk to Bambu Lab USA’s business is too vague or hypothetical to justify making it a required party. Finally, the court noted that even if Stratasys named the wrong defendant, this does not justify dismissal under Rule 12(b)(7). Instead, the judge stated it would be more appropriate for the defendants to raise that argument in a motion for summary judgment. The Bambu Lab X1C 3D printer. Image via Bambu Lab. 3D printing patent battles  The 3D printing industry has seen its fair share of patent infringement disputes over recent months. In May 2025, 3D printer hotend developer Slice Engineering reached an agreement with Creality over a patent non-infringement lawsuit.  The Chinese 3D printer OEM filed the lawsuit in July 2024 in the U.S. District Court for the Northern District of Florida, Gainesville Division. The company claimed that Slice Engineering had falsely accused it of infringing two hotend patents, U.S. Patent Nos. 10,875,244 and 11,660,810. These cover mechanical and thermal features of Slice’s Mosquito 3D printer hotend. Creality requested a jury trial and sought a ruling confirming it had not infringed either patent. Court documents show that Slice Engineering filed a countersuit in December 2024. The Gainesville-based company maintained that Creaility “has infringed and continues to infringe” on both patents. In the filing, the company also denied allegations that it had harassed Creality’s partners, distributors, and customers, and claimed that Creality had refused to negotiate a resolution.   The Creality v. Slice Engineering lawsuit has since been dropped following a mutual resolution. Court documents show that both parties have permanently dismissed all claims and counterclaims, agreeing to cover their own legal fees and costs.  In other news, large-format resin 3D printer manufacturer Intrepid Automation sued 3D Systems over alleged patent infringement. The lawsuit, filed in February 2025, accused 3D Systems of using patented technology in its PSLA 270 industrial resin 3D printer. The filing called the PSLA 270 a “blatant knock off” of Intrepid’s DLP multi-projection “Range” 3D printer.   San Diego-based Intrepid Automation called this alleged infringement the “latest chapter of 3DS’s brazen, anticompetitive scheme to drive a smaller competitor with more advanced technology out of the marketplace.” The lawsuit also accused 3D Systems of corporate espionage, claiming one of its employees stole confidential trade secrets that were later used to develop the PSLA 270 printer. 3D Systems denied the allegations and filed a motion to dismiss the case. The company called the lawsuit “a desperate attempt” by Intrepid to distract from its own alleged theft of 3D Systems’ trade secrets. Who won the 2024 3D Printing Industry Awards? Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news.You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content.Featured image shows a Stratasys Fortus 450mc (left) and a Bambu Lab X1C (right). Image by 3D Printing industry.
    Like
    Love
    Wow
    Sad
    Angry
    522
    2 Comentários 0 Compartilhamentos
  • No Kings: protests in the eye of the storm

    As President Donald Trump kicked off a birthday military parade on the streets of Washington, DC, what’s estimated as roughly 2,000 events were held across the US and beyond — protesting Trump and Elon Musk’s evisceration of government services, an unprecedented crackdown by Immigration and Customs Enforcement, and countless other actions from the administration in its first five months. Held under the title “No Kings”, they’re the latest in several mass protests, following April’s Hands Off events and a wave of Tesla Takedown demonstrations in March.As The Verge’s Tina Nguyen went to downtown DC, we also sent reporters to No Kings demonstrations spanning the country, plus a “No Tyrants” event in the UK. How would they unfold after promises of “very heavy force” against protesters in the capital, after the deployment of thousands of military troops in a move a judge has bluntly called illegal, and after promises to “liberate” the city of Los Angeles from its “burdensome leadership” by local elected officials? What about the overnight killing of a Minnesota Democratic state representative and her husband, and the shooting of a Democratic state senator and his wife?The answer, at the events we attended, was fairly calmly — even against a backdrop of chaos.Downtown Los Angeles, CaliforniaAn inflatable baby Donald Trump, dressed in a diaper, hovered over throngs of people rallying outside of Los Angeles City Hall. Demonstrators outnumbered clumps of California National Guard members in fatigues posted up along sidewalks. “Go home to your families, we don’t need you in our streets,” one young person wearing a long braid down her back tells them while marching past. “Trump come catch these hands foo!” the back of her sign reads. I can’t see what the front says, but I can tell there’s an empty bag of Cheetos pasted to it.The big baby joins the march, floating through the streets of Downtown LA over demonstrators. A flatbed truck rolls ahead of it, the band — maybe LA’s own Ozomatli? — singing “We don’t like Trump” to the tune of “We Want The Funk.” Ducking inside Grand Central Market from the march, I talk to Puck and Twinkle Toes — two demonstrators in line for the public restrooms. Twinkle Toes tells me she’s part of an activist clown collective called Imp and Circumstance, wearing pink and white clown makeup and a striped pink and white bow wrapped around a loose hair bun atop her head. She’s here exercising her right to free speech, she says. Demonstrators in Los Angeles marched alongside an inflatable Donald Trump baby dressed in a diaper.“The more people that are out here, the more we know that this is not okay. That we don’t want an autocrat. We want democracy,” Puck tells me, adding that the Pride March in Hollywood last weekend was “nothing but love and sunshine” despite protests and burning driverless cars making headlines in downtown. “The news tries to make you think all of LA is rioting. It’s not.” Puck says.Back out on the streets, a young man quickly writes “Fuck ICE” on a black wall with white spray paint before a group of older demonstrators wearing floppy hats shushes him away — warning him that tagging will only attract more law enforcement.Further along, another older man with tufts of white hair sticking out under his Lakers cap walks stiffly and slowly along under the summer sun. A Mexican flag draped across his shoulders, he crosses Hope Street. A young man wearing a Nike cap makes his way over to ask if he wants water; the old man accepts a bottle and keeps walking without stopping. The march has looped around downtown, and is coming to an end back at City Hall. As I make my way to my bus stop, a line of police vehicles — sirens blasting — whizzes past me, back toward the crowd still gathering around City Hall.The Los Angeles Police Department issued a dispersal order for parts of downtown Los Angeles later in the afternoon, citing people “throwing rocks, bricks, bottles and other objects.” Law enforcement reportedly cleared crowds using gas, and the LAPD authorized the use of “less lethal” force.— Justine CalmaPortland, OregonFour different “No Kings” protests in the greater Portland area on Saturday drew massive crowds of tens of thousands across the city. Various activists, government officials, and representatives for politicians spoke at the rallies, which also featured music and live performances.Protesters of all ages came with dogs, strollers, flags, banners, and hand-made signs. At the downtown waterfront, some tourist boats appeared to still be departing, but the bike rental standwas closed for the day with a hand-lettered explanation reading “No crowns, no thrones, no kings” and “Americans against oligarchy.” Women appearing to be organizers passed out free American flags; many attendees came with their own American flags modified to fly upside down. Most protesters brought signs expressing a wide range of sentiments on the theme of “No Kings.” Some signs were surprisingly verbosewe’d all still be British”) while others were more succinct. Others opted for simple images, such as a picture of a crown crossed out, or — less frequently — a guillotine. Image: Sarah JeongThe waterfront park area was filled with people from the shoreline to the curb of the nearest street, where protesters held up signs to passing cars that honked in approval. The honking of a passing fire truck sent the crowd into an uproarious cheer. Portland is about a thousand miles from the border with Mexico, but the flag of its distant neighbor nation has emerged as protest iconography in solidarity with Los Angeles. The rainbow pride flag was flown as often as the Mexican flag. Military veterans were scattered throughout the crowd, some identifying themselves as having seen action in conflicts spanning from Vietnam to Afghanistan. Emanuel, an Air Force veteran, told me that he had turned out in defense of the constitution and due process, saying, “Nobody has any rights if one person doesn’t have any rights.” Image: Sarah JeongAnger was directed at ICE and the mass deportations all throughout the day, in signage, in chants, and in rally speeches. The previous night, about 150 people protested at a local ICE facility — coincidentally located by the Tesla dealership — a mile south of downtown, near a highway exit. The ICE facility protests, which have been continuous for some days, have been steadily building up. A couple of “No Kings” signs were present on Friday.. Demonstrators stood on the curb urging passing cars to “Honk if you hate fascists,” successfully eliciting car horns every few seconds, including some from a pristine white Tesla. Federal law enforcement in camo and helmets, their faces obscured, maced and shot at protesters with pepper balls, targeting them through the gates and sniping at them from the rooftop of the building. A handful of protesters — many wearing gas masks and respirators — formed phalanx formations in the driveway, wielding umbrellas and handmade shields. On Saturday, a speaker at one of the “No Kings” rallies advertised the occupation of the ICE facility, saying, “We’re a sanctuary city.” The crowd — replete with American flags both upside down and right side up — cheered. — Sarah JeongNew Port Richey, FloridaNearly every intersection on Pasco County’s State Road 54 looks the same: a cross-section of strip malls, each anchored by a Walmart or Target or Publix, surrounded by a mix of restaurants, nail salons, and gas stations. It’s not an environment that is particularly conducive to protests, but hundreds of people turned out in humid, 90-plus degree weather anyway. The overall size of the crowd is hard to determine, but it’s larger than I — and other attendees — anticipated, given the local demographics.New Port Richey, FL. Image: Gaby Del ValleEveryone is on the sidewalk; an organizer with a megaphone tells people to use crosswalks if they’re going to attempt to brave the six-lane highway. Two days earlier, Governor Ron DeSantis said Floridians could legally run over protesters on the street if they feel “threatened.” New Port Richey, FL. Image: Gaby Del ValleSo far, most drivers seem friendly. There are lots of supportive honks. One woman rolls down her window and thanks the protesters. “I love you! I wish I could be with you, but I have to work today!” she yells as she drives away. Not everyone is amenable. A man in a MAGA hat marches through the crowd waving a “thin green line” flag and yelling “long live the king!” as people in the crowd call him a traitor. A pickup truck drives by blasting “Ice Ice Baby,” waving another pro-law enforcement flag. The protesters have flags, too: American flags large and small, some upside down; Mexican; Ukrainian; Palestinian; Canadian; different configurations of pride and trans flags. Their signs, like their flags, illustrate their diverse reasons for attending: opposition to Trump’s “big beautiful” funding bill, DOGE’s budget cuts, and ICE arrests; support for immigrants, government workers, and Palestinians. One woman wears an inflatable chicken suit. Her friend pulls an effigy of Trump — dressed to look both like an eighteenth-century monarch, a taco, and a chicken — alongside her.New Port Richey, FL. Image: Gaby Del ValleMost of the demonstrators are on the older side, but there are people of all ages in attendance. “I thought it was going to be maybe 20 people with a couple of signs,” Abby, 24, says, adding that she’s pleasantly surprised at both the turnout and the fact that most of the protesters are of retirement age. Abe, 20, tells me this is his first protest. Holding a sign that says “ICE = GESTAPO,” he tells me he came out to support a friend who is Mexican. Three teenagers walk by with signs expressing support for immigrants: “While Trump destroys America, we built it.” “Trump: 3 felonies. My parents: 0.” As I drive away, I notice nine counter-protesters off to the side, around the corner from the main event. They wave their own flags, but the demonstrators seemingly pay them no mind.— Gaby Del ValleHistoric Filipinotown, Los AngelesWearing a camo baseball cap — “Desert Storm Veteran” emblazoned on the front — Joe Arciaga greets a crowd of about 100 people in Los Angeles’ Historic Filipinotown around 9:00AM.“Good morning everyone, are you ready for some beautiful trouble?” Arciaga says into the megaphone, an American flag bandana wrapped around his wrist. The faces of Filipino labor leaders Philip Vera Cruz and Larry Itliong, who organized farm workers alongside Cesar Chavez, peer over his shoulders from a mural that lines the length of Unidad Park where Arciaga and a group called Lakas Collective helped organize this neighborhood No Kings rally. “I’m a Desert Storm veteran, and I’m a father of three and a grandfather of three, and I want to work for a future where democracy is upheld, due process, civil rights, the preservation of the rule of law — That’s all I want. I’m not a billionaire, I’m just a regular Joe, right?”, he tells The Verge.Joe Arciaga speaks to people at a rally in Historic Filipinotown, Los Angeles. Image: Justine Calma“I am mad as hell,” he says, when I ask him about the Army 250th anniversary parade Donald Trump has organized in Washington, DC coinciding with the president’s birthday. “The guy does not deserve to be honored, he’s a draft dodger, right?” Arciaga says. He’s “livid” that the President and DOGE have fired veterans working for federal agencies and slashed VA staff.Arciaga organizes the crowd into two lines that file out of the park to stand along Beverly Blvd., one of the main drags through LA. Arciaga has deputized a handful of attendees with security or medical experience with whistles to serve as “marshals” tasked with flagging and de-escalating any potentially risky situation that might arise. Johneric Concordia, one of the co-founders of the popular The Park’s Finest barbecue joint in the neighborhood, is MCing out on Beverly Blvd. He and Arciaga direct people onto the sidewalks and off the asphalt as honking cars zip by. In between chants of “No hate! No fear! Immigrants are welcome here!” and rap songs from LA artist Bambu that Concordia plays from a speaker, Concordia hypes up the organizers. “Who’s cool? Joe’s cool?” He spits into the microphone connected to his speaker. “Who’s streets? Our streets!” the crowd cheers. An hour later, a man sitting at a red light in a black Prius rolls down his window. “Go home!” he yells from the intersection. “Take your Mexican flag and go home!”The crowd mostly ignores him. One attendee on the corner holds up his “No Kings” sign to the Prius without turning his head to look at him. A few minutes later, a jogger in a blue t-shirt raises his fist as he passes the crowd. “Fuck yeah guys,” he says to cheers.By 10AM, the neighborhood event is coming to a close. Demonstrators start to trickle away, some fanning out to other rallies planned across LA today. Concordia is heading out too, microphone and speaker still in hand, “If you’re headed to downtown, watch out for suspicious crew cuts!” — Justine CalmaSan Francisco, California1/10Most of the crowd trickled out after 2pm, which was the scheduled end time of the protest, but hundreds stayed in the area. Image: Vjeran PavicLondon, UKLondon’s protest was a little different than most: it was almost entirely bereft of “No Kings” signs, thanks to the fact that about two miles away much larger crowds were gathered to celebrate the official birthday of one King Charles III. “We don’t have anything against King Charles,” Alyssa, a member of organizers Indivisible London, told me. And so, “out of respect for our host country as immigrants,” they instead set up shop in front of the US embassy with a tweaked message: “No kings, no crowns” became “no tyrants, no clowns.” London, UK. Image: Dominic PrestonOf the hundreds gathered, not everyone got the memo, with a few painted signs decrying kings and crowns regardless, and one brave Brit brandishing a bit of cardboard with a simple message: “Our king is better than yours!”London, UK. Image: Dominic PrestonStill, most of the crowd were on board, with red noses, clown suits, and Pennywise masks dotted throughout, plus costumes ranging from tacos to Roman emperors. “I think tyrants is the better word, and that’s why I dressed up as Caesar, because he was the original,” says Anna, a Long Island native who’s lived in London for three years. “Nobody likes a tyrant. Nobody. And they don’t do well, historically, but they destroy a lot.”For 90 minutes or so the crowd — predominantly American, judging by the accents around me — leaned into the circus theme. Speakers shared the stage with performers, from a comic singalong of anti-Trump protest songs to a protracted pantomime in which a woman in a banana costume exhorted the crowd to pelt a Donald Trump impersonator with fresh peels. London, UK. Image: Dominic PrestonDuring a break in festivities, Alyssa told the crowd, “The most threatening sound to an oligarch is laughter.”— Dominic PrestonProspect Park, Brooklyn, New YorkThe No Kings protest at Brooklyn’s Grand Army Plaza was a calmer affair. Instead of gathering under the picturesque memorial arch, protesters were largely sequestered to a corner right outside Prospect Park, with some streets blocked off by police. The weekly farmers market was in full swing, meaning people cradling bundles of rhubarb were swerving in and out of protest signs that read things like, “Hating Donald Trump is Brat” and “Is it time to get out the pitch forks?” Like during the Hands Off protest in April, New York got rain on Saturday.Prospect Park, Brooklyn. Image: Mia SatoThe area where protesters were gathered made it difficult to count the crowd, but there were hundreds — perhaps a few thousand — people that streamed in and out. At one point, some protesters began marching down the street alongside Prospect Park, while others stayed at Grand Army Plaza to chant, cheer, and hold signs up at oncoming vehicles. With its proximity to the public library, the park, and densely populated neighborhoods, the massive intersection is a high-foot traffic area. Cars blared their horns as they passed, American flags waving in the chilly afternoon breeze.Jane, a Brooklyn resident who stood on the curb opposite the protesters, said she isn’t typically someone who comes out to actions like this: before the No Kings event, she had only ever been to one protest, the Women’s March.Prospect Park, Brooklyn. Image: Mia Sato“I’m deeply concerned about our country,” Jane said, pausing as a long stream of trucks and cars honked continuously in support of the protesters in the background. “I think Trump is behaving as an authoritarian. We’ve seen in Russia, in Hungary, in Hong Kong, that the slide from freedom to not freedom is very fast and very quick if people do not make their voices heard,” Jane said. “I’m concerned that that’s what’s happening in the United States.” Jane also cited cuts to Medicaid and funding for academic research as well as tariffs as being “unacceptable.”Prospect Park, Brooklyn. Image: Mia SatoThe event was peaceful — there were lots of kids present — and people were in good spirits despite the rain. Protest signs ran the gamut from general anti-Trump slogansto New York City-specific causes like “Andrew Cuomo can’t read”. One sign read, “Fix your hearts or die,” an iconic line from the late director, David Lynch’s, Twin Peaks: The Return. And of course, amid nationwide immigration raids that have been escalated by the involvement of the federal government, ICE was top of mind: one sign simply read, “Melt ICE,” and another protester held a large “NO ICE IN NYC” sign. Though it was smaller and more contained than other events, the protest didn’t lack conviction: attendees of all ages stood in the cold rain, chanting and blowing into vuvuzela, banging the lids of pots and pans. At one point a man stood on the median on the street, leading the group in chants of “No justice, no peace.” Cars laid on the horn as they drove by.— Mia SatoAkron, OhioIt’s been raining pretty hard the last few days in Akron, OH, so much that I didn’t think there’d be a large turnout for our chapter of the No Kings protest. But I was emphatically proven wrong as the crowds I saw dwarfed the Tesla Takedown protests last month. Officially, the protest was to take place in front of the John F. Seiberling Federal Building on Main Street in Downtown Akron. But the concentration of people spilled over from that small space down Main Street and up Market Street. All told, though there were no official counts, I estimate somewhere between 500 to 900 people in this blue enclave in Northeast Ohio.The mood was exuberant, buoyed by supporters who honked their horns as they passed. The chorus of horns was nonstop, and when a sanitation truck honked as it went by, cheers got louder. The chants the crowds were singing took on a local flare. Ohio is the home of the Ohio State Buckeyes and anywhere you go, shout “O-H” and you’ll invariably get an “I-O” response. The crowds used that convention to make their own chant, “OH-IO, Donald Trump has got to go.”There was no police presence here and the crowd was very good at policing itself. Ostensibly out of concern for the incidents where people have rammed their cars into protestor crowds, the people here have taken up crossing guard duties, aiding folks who wish to cross Main or Market Streets. Toward the end of my time at the protest, I saw an older gentleman wearing Kent State gear and holding a sign that read, “Remember another time the National Guard was called in?” His sign featured a drawing of the famous photo from the event in which four Kent State students during a protest of the Vietnam War were killed by National Guard troops. I caught up with him to ask him some questions and he told me his name was Chuck Ayers, a professional cartoonist, and was present at the shooting. Akron, OH. Image: Ash Parrish“When I saw the National Guard in front of the federal building in LA,” he told me, “It was just another flashback.”He did not tell me this at the time, but Ayers is a nationally recognized cartoonist, noted for co-creating the comic strip Crankshaft. He’s lived in Ohio his entire life and of course, drew that sign himself. As he was telling me about how seeing news of the National Guard being deployed in LA, I could see him strain to hold back his emotions. He said it still hurts to see this 55 years later, but that he was heartened to see so many people standing here in community and solidarity. He also said that given his pain and trauma he almost didn’t come. When I asked why he showed up when it so obviously causes him pain he said simply, “Because I have to.”— Ash ParrishOneonta, New YorkOn a northward drive to Oneonta — population roughly 15,000, the largest city in New York’s mainly rural Otsego County — one of the most prominent landmarks is a sprawling barn splashed in huge, painted block letters with TRUMP 2024.It’s Trump country, but not uniformly Trumpy country, as evidenced by what I estimated as a hundreds-strong crowd gathered in a field just below Main Street that came together with a friendly county-fair atmosphere. Kids sat on their parents’ shoulders; American flags fluttered next to signs with slogans like SHADE NEVER MADE ANYONE LESS GAY, and attendees grumbled persistently about the event’s feeble sound system, set up on the bed of a pickup truck. It was the kind of conspicuously patriotic, far-from-urban protest that the Trump administration has all but insisted doesn’t exist.Image: Adi RobertsonBeyond a general condemnation of Trump, protest signs repped the same issues being denounced across the country. The wars in Gaza and Ukraine made an appearance, as did Elon Musk and Tesla. A couple of people called out funding cuts for organizations like NPR, one neatly lettered sign reminded us that WEATHER FORECASTING SAVES LIVES, another warned “Keep your nasty little hands off Social Security,” and a lot — unsurprisingly, given the past week’s events — attacked mass deportations and ICE. An attendee who identified himself as Bill, standing behind a placard that blocked most of him from sight, laid out his anger at the administration’s gutting of the Environmental Protection Agency. “I think if it was not for protests, there would be no change,” he told me.The event itself, supported by a coalition including the local chapter of Indivisible, highlighted topics like reproductive justice and LGBTQ rights alongside issues for groups often stereotyped as Republican blocs — there was a speech about Department of Veterans Affairs cuts and a representative from the local Office for the Aging. Rules for a march around the modest downtown were laid out: no blocking pedestrians or vehicles, and for the sake of families doing weekend shopping, watch the language. “Fuck!” one person yelled indistinctly from the audience. “No, no,” the event’s emcee chided gently. The philosophy, as she put it, was one of persuasion. “We want to build the resistance, not make people angry at us.”Image: Adi RobertsonBut even in a place that will almost certainly never see a National Guard deployment or the ire of a Truth Social post, the Trump administration’s brutal deportation program had just hit close to home. Only hours before the protest commenced, ICE agents were recorded handcuffing a man and removing him in an unmarked black car — detaining what was reportedly a legal resident seeking asylum from Venezuela. The mayor of Oneonta, Mark Drnek, relayed the news to the crowd. “ICE! We see you!” boomed Drnek from the truckbed. “We recognize you for what you are, and we understand, and we reject your vile purpose.”The crowd cheered furiously. The stars and stripes waved.- Adi RobertsonSee More: Policy
    #kings #protests #eye #storm
    No Kings: protests in the eye of the storm
    As President Donald Trump kicked off a birthday military parade on the streets of Washington, DC, what’s estimated as roughly 2,000 events were held across the US and beyond — protesting Trump and Elon Musk’s evisceration of government services, an unprecedented crackdown by Immigration and Customs Enforcement, and countless other actions from the administration in its first five months. Held under the title “No Kings”, they’re the latest in several mass protests, following April’s Hands Off events and a wave of Tesla Takedown demonstrations in March.As The Verge’s Tina Nguyen went to downtown DC, we also sent reporters to No Kings demonstrations spanning the country, plus a “No Tyrants” event in the UK. How would they unfold after promises of “very heavy force” against protesters in the capital, after the deployment of thousands of military troops in a move a judge has bluntly called illegal, and after promises to “liberate” the city of Los Angeles from its “burdensome leadership” by local elected officials? What about the overnight killing of a Minnesota Democratic state representative and her husband, and the shooting of a Democratic state senator and his wife?The answer, at the events we attended, was fairly calmly — even against a backdrop of chaos.Downtown Los Angeles, CaliforniaAn inflatable baby Donald Trump, dressed in a diaper, hovered over throngs of people rallying outside of Los Angeles City Hall. Demonstrators outnumbered clumps of California National Guard members in fatigues posted up along sidewalks. “Go home to your families, we don’t need you in our streets,” one young person wearing a long braid down her back tells them while marching past. “Trump come catch these hands foo!” the back of her sign reads. I can’t see what the front says, but I can tell there’s an empty bag of Cheetos pasted to it.The big baby joins the march, floating through the streets of Downtown LA over demonstrators. A flatbed truck rolls ahead of it, the band — maybe LA’s own Ozomatli? — singing “We don’t like Trump” to the tune of “We Want The Funk.” Ducking inside Grand Central Market from the march, I talk to Puck and Twinkle Toes — two demonstrators in line for the public restrooms. Twinkle Toes tells me she’s part of an activist clown collective called Imp and Circumstance, wearing pink and white clown makeup and a striped pink and white bow wrapped around a loose hair bun atop her head. She’s here exercising her right to free speech, she says. Demonstrators in Los Angeles marched alongside an inflatable Donald Trump baby dressed in a diaper.“The more people that are out here, the more we know that this is not okay. That we don’t want an autocrat. We want democracy,” Puck tells me, adding that the Pride March in Hollywood last weekend was “nothing but love and sunshine” despite protests and burning driverless cars making headlines in downtown. “The news tries to make you think all of LA is rioting. It’s not.” Puck says.Back out on the streets, a young man quickly writes “Fuck ICE” on a black wall with white spray paint before a group of older demonstrators wearing floppy hats shushes him away — warning him that tagging will only attract more law enforcement.Further along, another older man with tufts of white hair sticking out under his Lakers cap walks stiffly and slowly along under the summer sun. A Mexican flag draped across his shoulders, he crosses Hope Street. A young man wearing a Nike cap makes his way over to ask if he wants water; the old man accepts a bottle and keeps walking without stopping. The march has looped around downtown, and is coming to an end back at City Hall. As I make my way to my bus stop, a line of police vehicles — sirens blasting — whizzes past me, back toward the crowd still gathering around City Hall.The Los Angeles Police Department issued a dispersal order for parts of downtown Los Angeles later in the afternoon, citing people “throwing rocks, bricks, bottles and other objects.” Law enforcement reportedly cleared crowds using gas, and the LAPD authorized the use of “less lethal” force.— Justine CalmaPortland, OregonFour different “No Kings” protests in the greater Portland area on Saturday drew massive crowds of tens of thousands across the city. Various activists, government officials, and representatives for politicians spoke at the rallies, which also featured music and live performances.Protesters of all ages came with dogs, strollers, flags, banners, and hand-made signs. At the downtown waterfront, some tourist boats appeared to still be departing, but the bike rental standwas closed for the day with a hand-lettered explanation reading “No crowns, no thrones, no kings” and “Americans against oligarchy.” Women appearing to be organizers passed out free American flags; many attendees came with their own American flags modified to fly upside down. Most protesters brought signs expressing a wide range of sentiments on the theme of “No Kings.” Some signs were surprisingly verbosewe’d all still be British”) while others were more succinct. Others opted for simple images, such as a picture of a crown crossed out, or — less frequently — a guillotine. Image: Sarah JeongThe waterfront park area was filled with people from the shoreline to the curb of the nearest street, where protesters held up signs to passing cars that honked in approval. The honking of a passing fire truck sent the crowd into an uproarious cheer. Portland is about a thousand miles from the border with Mexico, but the flag of its distant neighbor nation has emerged as protest iconography in solidarity with Los Angeles. The rainbow pride flag was flown as often as the Mexican flag. Military veterans were scattered throughout the crowd, some identifying themselves as having seen action in conflicts spanning from Vietnam to Afghanistan. Emanuel, an Air Force veteran, told me that he had turned out in defense of the constitution and due process, saying, “Nobody has any rights if one person doesn’t have any rights.” Image: Sarah JeongAnger was directed at ICE and the mass deportations all throughout the day, in signage, in chants, and in rally speeches. The previous night, about 150 people protested at a local ICE facility — coincidentally located by the Tesla dealership — a mile south of downtown, near a highway exit. The ICE facility protests, which have been continuous for some days, have been steadily building up. A couple of “No Kings” signs were present on Friday.. Demonstrators stood on the curb urging passing cars to “Honk if you hate fascists,” successfully eliciting car horns every few seconds, including some from a pristine white Tesla. Federal law enforcement in camo and helmets, their faces obscured, maced and shot at protesters with pepper balls, targeting them through the gates and sniping at them from the rooftop of the building. A handful of protesters — many wearing gas masks and respirators — formed phalanx formations in the driveway, wielding umbrellas and handmade shields. On Saturday, a speaker at one of the “No Kings” rallies advertised the occupation of the ICE facility, saying, “We’re a sanctuary city.” The crowd — replete with American flags both upside down and right side up — cheered. — Sarah JeongNew Port Richey, FloridaNearly every intersection on Pasco County’s State Road 54 looks the same: a cross-section of strip malls, each anchored by a Walmart or Target or Publix, surrounded by a mix of restaurants, nail salons, and gas stations. It’s not an environment that is particularly conducive to protests, but hundreds of people turned out in humid, 90-plus degree weather anyway. The overall size of the crowd is hard to determine, but it’s larger than I — and other attendees — anticipated, given the local demographics.New Port Richey, FL. Image: Gaby Del ValleEveryone is on the sidewalk; an organizer with a megaphone tells people to use crosswalks if they’re going to attempt to brave the six-lane highway. Two days earlier, Governor Ron DeSantis said Floridians could legally run over protesters on the street if they feel “threatened.” New Port Richey, FL. Image: Gaby Del ValleSo far, most drivers seem friendly. There are lots of supportive honks. One woman rolls down her window and thanks the protesters. “I love you! I wish I could be with you, but I have to work today!” she yells as she drives away. Not everyone is amenable. A man in a MAGA hat marches through the crowd waving a “thin green line” flag and yelling “long live the king!” as people in the crowd call him a traitor. A pickup truck drives by blasting “Ice Ice Baby,” waving another pro-law enforcement flag. The protesters have flags, too: American flags large and small, some upside down; Mexican; Ukrainian; Palestinian; Canadian; different configurations of pride and trans flags. Their signs, like their flags, illustrate their diverse reasons for attending: opposition to Trump’s “big beautiful” funding bill, DOGE’s budget cuts, and ICE arrests; support for immigrants, government workers, and Palestinians. One woman wears an inflatable chicken suit. Her friend pulls an effigy of Trump — dressed to look both like an eighteenth-century monarch, a taco, and a chicken — alongside her.New Port Richey, FL. Image: Gaby Del ValleMost of the demonstrators are on the older side, but there are people of all ages in attendance. “I thought it was going to be maybe 20 people with a couple of signs,” Abby, 24, says, adding that she’s pleasantly surprised at both the turnout and the fact that most of the protesters are of retirement age. Abe, 20, tells me this is his first protest. Holding a sign that says “ICE = GESTAPO,” he tells me he came out to support a friend who is Mexican. Three teenagers walk by with signs expressing support for immigrants: “While Trump destroys America, we built it.” “Trump: 3 felonies. My parents: 0.” As I drive away, I notice nine counter-protesters off to the side, around the corner from the main event. They wave their own flags, but the demonstrators seemingly pay them no mind.— Gaby Del ValleHistoric Filipinotown, Los AngelesWearing a camo baseball cap — “Desert Storm Veteran” emblazoned on the front — Joe Arciaga greets a crowd of about 100 people in Los Angeles’ Historic Filipinotown around 9:00AM.“Good morning everyone, are you ready for some beautiful trouble?” Arciaga says into the megaphone, an American flag bandana wrapped around his wrist. The faces of Filipino labor leaders Philip Vera Cruz and Larry Itliong, who organized farm workers alongside Cesar Chavez, peer over his shoulders from a mural that lines the length of Unidad Park where Arciaga and a group called Lakas Collective helped organize this neighborhood No Kings rally. “I’m a Desert Storm veteran, and I’m a father of three and a grandfather of three, and I want to work for a future where democracy is upheld, due process, civil rights, the preservation of the rule of law — That’s all I want. I’m not a billionaire, I’m just a regular Joe, right?”, he tells The Verge.Joe Arciaga speaks to people at a rally in Historic Filipinotown, Los Angeles. Image: Justine Calma“I am mad as hell,” he says, when I ask him about the Army 250th anniversary parade Donald Trump has organized in Washington, DC coinciding with the president’s birthday. “The guy does not deserve to be honored, he’s a draft dodger, right?” Arciaga says. He’s “livid” that the President and DOGE have fired veterans working for federal agencies and slashed VA staff.Arciaga organizes the crowd into two lines that file out of the park to stand along Beverly Blvd., one of the main drags through LA. Arciaga has deputized a handful of attendees with security or medical experience with whistles to serve as “marshals” tasked with flagging and de-escalating any potentially risky situation that might arise. Johneric Concordia, one of the co-founders of the popular The Park’s Finest barbecue joint in the neighborhood, is MCing out on Beverly Blvd. He and Arciaga direct people onto the sidewalks and off the asphalt as honking cars zip by. In between chants of “No hate! No fear! Immigrants are welcome here!” and rap songs from LA artist Bambu that Concordia plays from a speaker, Concordia hypes up the organizers. “Who’s cool? Joe’s cool?” He spits into the microphone connected to his speaker. “Who’s streets? Our streets!” the crowd cheers. An hour later, a man sitting at a red light in a black Prius rolls down his window. “Go home!” he yells from the intersection. “Take your Mexican flag and go home!”The crowd mostly ignores him. One attendee on the corner holds up his “No Kings” sign to the Prius without turning his head to look at him. A few minutes later, a jogger in a blue t-shirt raises his fist as he passes the crowd. “Fuck yeah guys,” he says to cheers.By 10AM, the neighborhood event is coming to a close. Demonstrators start to trickle away, some fanning out to other rallies planned across LA today. Concordia is heading out too, microphone and speaker still in hand, “If you’re headed to downtown, watch out for suspicious crew cuts!” — Justine CalmaSan Francisco, California1/10Most of the crowd trickled out after 2pm, which was the scheduled end time of the protest, but hundreds stayed in the area. Image: Vjeran PavicLondon, UKLondon’s protest was a little different than most: it was almost entirely bereft of “No Kings” signs, thanks to the fact that about two miles away much larger crowds were gathered to celebrate the official birthday of one King Charles III. “We don’t have anything against King Charles,” Alyssa, a member of organizers Indivisible London, told me. And so, “out of respect for our host country as immigrants,” they instead set up shop in front of the US embassy with a tweaked message: “No kings, no crowns” became “no tyrants, no clowns.” London, UK. Image: Dominic PrestonOf the hundreds gathered, not everyone got the memo, with a few painted signs decrying kings and crowns regardless, and one brave Brit brandishing a bit of cardboard with a simple message: “Our king is better than yours!”London, UK. Image: Dominic PrestonStill, most of the crowd were on board, with red noses, clown suits, and Pennywise masks dotted throughout, plus costumes ranging from tacos to Roman emperors. “I think tyrants is the better word, and that’s why I dressed up as Caesar, because he was the original,” says Anna, a Long Island native who’s lived in London for three years. “Nobody likes a tyrant. Nobody. And they don’t do well, historically, but they destroy a lot.”For 90 minutes or so the crowd — predominantly American, judging by the accents around me — leaned into the circus theme. Speakers shared the stage with performers, from a comic singalong of anti-Trump protest songs to a protracted pantomime in which a woman in a banana costume exhorted the crowd to pelt a Donald Trump impersonator with fresh peels. London, UK. Image: Dominic PrestonDuring a break in festivities, Alyssa told the crowd, “The most threatening sound to an oligarch is laughter.”— Dominic PrestonProspect Park, Brooklyn, New YorkThe No Kings protest at Brooklyn’s Grand Army Plaza was a calmer affair. Instead of gathering under the picturesque memorial arch, protesters were largely sequestered to a corner right outside Prospect Park, with some streets blocked off by police. The weekly farmers market was in full swing, meaning people cradling bundles of rhubarb were swerving in and out of protest signs that read things like, “Hating Donald Trump is Brat” and “Is it time to get out the pitch forks?” Like during the Hands Off protest in April, New York got rain on Saturday.Prospect Park, Brooklyn. Image: Mia SatoThe area where protesters were gathered made it difficult to count the crowd, but there were hundreds — perhaps a few thousand — people that streamed in and out. At one point, some protesters began marching down the street alongside Prospect Park, while others stayed at Grand Army Plaza to chant, cheer, and hold signs up at oncoming vehicles. With its proximity to the public library, the park, and densely populated neighborhoods, the massive intersection is a high-foot traffic area. Cars blared their horns as they passed, American flags waving in the chilly afternoon breeze.Jane, a Brooklyn resident who stood on the curb opposite the protesters, said she isn’t typically someone who comes out to actions like this: before the No Kings event, she had only ever been to one protest, the Women’s March.Prospect Park, Brooklyn. Image: Mia Sato“I’m deeply concerned about our country,” Jane said, pausing as a long stream of trucks and cars honked continuously in support of the protesters in the background. “I think Trump is behaving as an authoritarian. We’ve seen in Russia, in Hungary, in Hong Kong, that the slide from freedom to not freedom is very fast and very quick if people do not make their voices heard,” Jane said. “I’m concerned that that’s what’s happening in the United States.” Jane also cited cuts to Medicaid and funding for academic research as well as tariffs as being “unacceptable.”Prospect Park, Brooklyn. Image: Mia SatoThe event was peaceful — there were lots of kids present — and people were in good spirits despite the rain. Protest signs ran the gamut from general anti-Trump slogansto New York City-specific causes like “Andrew Cuomo can’t read”. One sign read, “Fix your hearts or die,” an iconic line from the late director, David Lynch’s, Twin Peaks: The Return. And of course, amid nationwide immigration raids that have been escalated by the involvement of the federal government, ICE was top of mind: one sign simply read, “Melt ICE,” and another protester held a large “NO ICE IN NYC” sign. Though it was smaller and more contained than other events, the protest didn’t lack conviction: attendees of all ages stood in the cold rain, chanting and blowing into vuvuzela, banging the lids of pots and pans. At one point a man stood on the median on the street, leading the group in chants of “No justice, no peace.” Cars laid on the horn as they drove by.— Mia SatoAkron, OhioIt’s been raining pretty hard the last few days in Akron, OH, so much that I didn’t think there’d be a large turnout for our chapter of the No Kings protest. But I was emphatically proven wrong as the crowds I saw dwarfed the Tesla Takedown protests last month. Officially, the protest was to take place in front of the John F. Seiberling Federal Building on Main Street in Downtown Akron. But the concentration of people spilled over from that small space down Main Street and up Market Street. All told, though there were no official counts, I estimate somewhere between 500 to 900 people in this blue enclave in Northeast Ohio.The mood was exuberant, buoyed by supporters who honked their horns as they passed. The chorus of horns was nonstop, and when a sanitation truck honked as it went by, cheers got louder. The chants the crowds were singing took on a local flare. Ohio is the home of the Ohio State Buckeyes and anywhere you go, shout “O-H” and you’ll invariably get an “I-O” response. The crowds used that convention to make their own chant, “OH-IO, Donald Trump has got to go.”There was no police presence here and the crowd was very good at policing itself. Ostensibly out of concern for the incidents where people have rammed their cars into protestor crowds, the people here have taken up crossing guard duties, aiding folks who wish to cross Main or Market Streets. Toward the end of my time at the protest, I saw an older gentleman wearing Kent State gear and holding a sign that read, “Remember another time the National Guard was called in?” His sign featured a drawing of the famous photo from the event in which four Kent State students during a protest of the Vietnam War were killed by National Guard troops. I caught up with him to ask him some questions and he told me his name was Chuck Ayers, a professional cartoonist, and was present at the shooting. Akron, OH. Image: Ash Parrish“When I saw the National Guard in front of the federal building in LA,” he told me, “It was just another flashback.”He did not tell me this at the time, but Ayers is a nationally recognized cartoonist, noted for co-creating the comic strip Crankshaft. He’s lived in Ohio his entire life and of course, drew that sign himself. As he was telling me about how seeing news of the National Guard being deployed in LA, I could see him strain to hold back his emotions. He said it still hurts to see this 55 years later, but that he was heartened to see so many people standing here in community and solidarity. He also said that given his pain and trauma he almost didn’t come. When I asked why he showed up when it so obviously causes him pain he said simply, “Because I have to.”— Ash ParrishOneonta, New YorkOn a northward drive to Oneonta — population roughly 15,000, the largest city in New York’s mainly rural Otsego County — one of the most prominent landmarks is a sprawling barn splashed in huge, painted block letters with TRUMP 2024.It’s Trump country, but not uniformly Trumpy country, as evidenced by what I estimated as a hundreds-strong crowd gathered in a field just below Main Street that came together with a friendly county-fair atmosphere. Kids sat on their parents’ shoulders; American flags fluttered next to signs with slogans like SHADE NEVER MADE ANYONE LESS GAY, and attendees grumbled persistently about the event’s feeble sound system, set up on the bed of a pickup truck. It was the kind of conspicuously patriotic, far-from-urban protest that the Trump administration has all but insisted doesn’t exist.Image: Adi RobertsonBeyond a general condemnation of Trump, protest signs repped the same issues being denounced across the country. The wars in Gaza and Ukraine made an appearance, as did Elon Musk and Tesla. A couple of people called out funding cuts for organizations like NPR, one neatly lettered sign reminded us that WEATHER FORECASTING SAVES LIVES, another warned “Keep your nasty little hands off Social Security,” and a lot — unsurprisingly, given the past week’s events — attacked mass deportations and ICE. An attendee who identified himself as Bill, standing behind a placard that blocked most of him from sight, laid out his anger at the administration’s gutting of the Environmental Protection Agency. “I think if it was not for protests, there would be no change,” he told me.The event itself, supported by a coalition including the local chapter of Indivisible, highlighted topics like reproductive justice and LGBTQ rights alongside issues for groups often stereotyped as Republican blocs — there was a speech about Department of Veterans Affairs cuts and a representative from the local Office for the Aging. Rules for a march around the modest downtown were laid out: no blocking pedestrians or vehicles, and for the sake of families doing weekend shopping, watch the language. “Fuck!” one person yelled indistinctly from the audience. “No, no,” the event’s emcee chided gently. The philosophy, as she put it, was one of persuasion. “We want to build the resistance, not make people angry at us.”Image: Adi RobertsonBut even in a place that will almost certainly never see a National Guard deployment or the ire of a Truth Social post, the Trump administration’s brutal deportation program had just hit close to home. Only hours before the protest commenced, ICE agents were recorded handcuffing a man and removing him in an unmarked black car — detaining what was reportedly a legal resident seeking asylum from Venezuela. The mayor of Oneonta, Mark Drnek, relayed the news to the crowd. “ICE! We see you!” boomed Drnek from the truckbed. “We recognize you for what you are, and we understand, and we reject your vile purpose.”The crowd cheered furiously. The stars and stripes waved.- Adi RobertsonSee More: Policy #kings #protests #eye #storm
    WWW.THEVERGE.COM
    No Kings: protests in the eye of the storm
    As President Donald Trump kicked off a birthday military parade on the streets of Washington, DC, what’s estimated as roughly 2,000 events were held across the US and beyond — protesting Trump and Elon Musk’s evisceration of government services, an unprecedented crackdown by Immigration and Customs Enforcement (ICE), and countless other actions from the administration in its first five months. Held under the title “No Kings” (with, as you’ll see, one conspicuous exception), they’re the latest in several mass protests, following April’s Hands Off events and a wave of Tesla Takedown demonstrations in March.As The Verge’s Tina Nguyen went to downtown DC, we also sent reporters to No Kings demonstrations spanning the country, plus a “No Tyrants” event in the UK. How would they unfold after promises of “very heavy force” against protesters in the capital, after the deployment of thousands of military troops in a move a judge has bluntly called illegal, and after promises to “liberate” the city of Los Angeles from its “burdensome leadership” by local elected officials? What about the overnight killing of a Minnesota Democratic state representative and her husband, and the shooting of a Democratic state senator and his wife?The answer, at the events we attended, was fairly calmly — even against a backdrop of chaos.Downtown Los Angeles, CaliforniaAn inflatable baby Donald Trump, dressed in a diaper, hovered over throngs of people rallying outside of Los Angeles City Hall. Demonstrators outnumbered clumps of California National Guard members in fatigues posted up along sidewalks. “Go home to your families, we don’t need you in our streets,” one young person wearing a long braid down her back tells them while marching past. “Trump come catch these hands foo!” the back of her sign reads. I can’t see what the front says, but I can tell there’s an empty bag of Cheetos pasted to it.The big baby joins the march, floating through the streets of Downtown LA over demonstrators. A flatbed truck rolls ahead of it, the band — maybe LA’s own Ozomatli? — singing “We don’t like Trump” to the tune of “We Want The Funk.” Ducking inside Grand Central Market from the march, I talk to Puck and Twinkle Toes — two demonstrators in line for the public restrooms. Twinkle Toes tells me she’s part of an activist clown collective called Imp and Circumstance, wearing pink and white clown makeup and a striped pink and white bow wrapped around a loose hair bun atop her head. She’s here exercising her right to free speech, she says. Demonstrators in Los Angeles marched alongside an inflatable Donald Trump baby dressed in a diaper.“The more people that are out here, the more we know that this is not okay. That we don’t want an autocrat. We want democracy,” Puck tells me, adding that the Pride March in Hollywood last weekend was “nothing but love and sunshine” despite protests and burning driverless cars making headlines in downtown. “The news tries to make you think all of LA is rioting. It’s not.” Puck says.Back out on the streets, a young man quickly writes “Fuck ICE” on a black wall with white spray paint before a group of older demonstrators wearing floppy hats shushes him away — warning him that tagging will only attract more law enforcement.Further along, another older man with tufts of white hair sticking out under his Lakers cap walks stiffly and slowly along under the summer sun. A Mexican flag draped across his shoulders, he crosses Hope Street. A young man wearing a Nike cap makes his way over to ask if he wants water; the old man accepts a bottle and keeps walking without stopping. The march has looped around downtown, and is coming to an end back at City Hall. As I make my way to my bus stop, a line of police vehicles — sirens blasting — whizzes past me, back toward the crowd still gathering around City Hall.The Los Angeles Police Department issued a dispersal order for parts of downtown Los Angeles later in the afternoon, citing people “throwing rocks, bricks, bottles and other objects.” Law enforcement reportedly cleared crowds using gas, and the LAPD authorized the use of “less lethal” force.— Justine CalmaPortland, OregonFour different “No Kings” protests in the greater Portland area on Saturday drew massive crowds of tens of thousands across the city. Various activists, government officials, and representatives for politicians spoke at the rallies, which also featured music and live performances. (One advertised free drag shows.) Protesters of all ages came with dogs, strollers, flags, banners, and hand-made signs. At the downtown waterfront, some tourist boats appeared to still be departing, but the bike rental stand (which also sells ice cream) was closed for the day with a hand-lettered explanation reading “No crowns, no thrones, no kings” and “Americans against oligarchy.” Women appearing to be organizers passed out free American flags; many attendees came with their own American flags modified to fly upside down. Most protesters brought signs expressing a wide range of sentiments on the theme of “No Kings.” Some signs were surprisingly verbose (“If the founders wanted a unitary executive (a king) we’d all still be British”) while others were more succinct (“Sic semper tyrannis”). Others opted for simple images, such as a picture of a crown crossed out, or — less frequently — a guillotine. Image: Sarah JeongThe waterfront park area was filled with people from the shoreline to the curb of the nearest street, where protesters held up signs to passing cars that honked in approval. The honking of a passing fire truck sent the crowd into an uproarious cheer. Portland is about a thousand miles from the border with Mexico, but the flag of its distant neighbor nation has emerged as protest iconography in solidarity with Los Angeles. The rainbow pride flag was flown as often as the Mexican flag. Military veterans were scattered throughout the crowd, some identifying themselves as having seen action in conflicts spanning from Vietnam to Afghanistan. Emanuel, an Air Force veteran, told me that he had turned out in defense of the constitution and due process, saying, “Nobody has any rights if one person doesn’t have any rights.” Image: Sarah JeongAnger was directed at ICE and the mass deportations all throughout the day, in signage, in chants, and in rally speeches. The previous night, about 150 people protested at a local ICE facility — coincidentally located by the Tesla dealership — a mile south of downtown, near a highway exit. The ICE facility protests, which have been continuous for some days, have been steadily building up. A couple of “No Kings” signs were present on Friday. (The following day, a handful of “Chinga la migra” signs would show up at the “No Kings” protests). Demonstrators stood on the curb urging passing cars to “Honk if you hate fascists,” successfully eliciting car horns every few seconds, including some from a pristine white Tesla. Federal law enforcement in camo and helmets, their faces obscured, maced and shot at protesters with pepper balls, targeting them through the gates and sniping at them from the rooftop of the building. A handful of protesters — many wearing gas masks and respirators — formed phalanx formations in the driveway, wielding umbrellas and handmade shields. On Saturday, a speaker at one of the “No Kings” rallies advertised the occupation of the ICE facility, saying, “We’re a sanctuary city.” The crowd — replete with American flags both upside down and right side up — cheered. — Sarah JeongNew Port Richey, FloridaNearly every intersection on Pasco County’s State Road 54 looks the same: a cross-section of strip malls, each anchored by a Walmart or Target or Publix, surrounded by a mix of restaurants, nail salons, and gas stations. It’s not an environment that is particularly conducive to protests, but hundreds of people turned out in humid, 90-plus degree weather anyway. The overall size of the crowd is hard to determine, but it’s larger than I — and other attendees — anticipated, given the local demographics. (Trump won 61 percent of the vote in Pasco County in 2024.) New Port Richey, FL. Image: Gaby Del ValleEveryone is on the sidewalk; an organizer with a megaphone tells people to use crosswalks if they’re going to attempt to brave the six-lane highway. Two days earlier, Governor Ron DeSantis said Floridians could legally run over protesters on the street if they feel “threatened.” New Port Richey, FL. Image: Gaby Del ValleSo far, most drivers seem friendly. There are lots of supportive honks. One woman rolls down her window and thanks the protesters. “I love you! I wish I could be with you, but I have to work today!” she yells as she drives away. Not everyone is amenable. A man in a MAGA hat marches through the crowd waving a “thin green line” flag and yelling “long live the king!” as people in the crowd call him a traitor. A pickup truck drives by blasting “Ice Ice Baby,” waving another pro-law enforcement flag. The protesters have flags, too: American flags large and small, some upside down; Mexican; Ukrainian; Palestinian; Canadian; different configurations of pride and trans flags. Their signs, like their flags, illustrate their diverse reasons for attending: opposition to Trump’s “big beautiful” funding bill, DOGE’s budget cuts, and ICE arrests; support for immigrants, government workers, and Palestinians. One woman wears an inflatable chicken suit. Her friend pulls an effigy of Trump — dressed to look both like an eighteenth-century monarch, a taco, and a chicken — alongside her.New Port Richey, FL. Image: Gaby Del ValleMost of the demonstrators are on the older side, but there are people of all ages in attendance. “I thought it was going to be maybe 20 people with a couple of signs,” Abby, 24, says, adding that she’s pleasantly surprised at both the turnout and the fact that most of the protesters are of retirement age. Abe, 20, tells me this is his first protest. Holding a sign that says “ICE = GESTAPO,” he tells me he came out to support a friend who is Mexican. Three teenagers walk by with signs expressing support for immigrants: “While Trump destroys America, we built it.” “Trump: 3 felonies. My parents: 0.” As I drive away, I notice nine counter-protesters off to the side, around the corner from the main event. They wave their own flags, but the demonstrators seemingly pay them no mind.— Gaby Del ValleHistoric Filipinotown, Los AngelesWearing a camo baseball cap — “Desert Storm Veteran” emblazoned on the front — Joe Arciaga greets a crowd of about 100 people in Los Angeles’ Historic Filipinotown around 9:00AM.“Good morning everyone, are you ready for some beautiful trouble?” Arciaga says into the megaphone, an American flag bandana wrapped around his wrist. The faces of Filipino labor leaders Philip Vera Cruz and Larry Itliong, who organized farm workers alongside Cesar Chavez, peer over his shoulders from a mural that lines the length of Unidad Park where Arciaga and a group called Lakas Collective helped organize this neighborhood No Kings rally. “I’m a Desert Storm veteran, and I’m a father of three and a grandfather of three, and I want to work for a future where democracy is upheld, due process, civil rights, the preservation of the rule of law — That’s all I want. I’m not a billionaire, I’m just a regular Joe, right?”, he tells The Verge.Joe Arciaga speaks to people at a rally in Historic Filipinotown, Los Angeles. Image: Justine Calma“I am mad as hell,” he says, when I ask him about the Army 250th anniversary parade Donald Trump has organized in Washington, DC coinciding with the president’s birthday. “The guy does not deserve to be honored, he’s a draft dodger, right?” Arciaga says. He’s “livid” that the President and DOGE have fired veterans working for federal agencies and slashed VA staff.Arciaga organizes the crowd into two lines that file out of the park to stand along Beverly Blvd., one of the main drags through LA. Arciaga has deputized a handful of attendees with security or medical experience with whistles to serve as “marshals” tasked with flagging and de-escalating any potentially risky situation that might arise. Johneric Concordia, one of the co-founders of the popular The Park’s Finest barbecue joint in the neighborhood, is MCing out on Beverly Blvd. He and Arciaga direct people onto the sidewalks and off the asphalt as honking cars zip by. In between chants of “No hate! No fear! Immigrants are welcome here!” and rap songs from LA artist Bambu that Concordia plays from a speaker, Concordia hypes up the organizers. “Who’s cool? Joe’s cool?” He spits into the microphone connected to his speaker. “Who’s streets? Our streets!” the crowd cheers. An hour later, a man sitting at a red light in a black Prius rolls down his window. “Go home!” he yells from the intersection. “Take your Mexican flag and go home!”The crowd mostly ignores him. One attendee on the corner holds up his “No Kings” sign to the Prius without turning his head to look at him. A few minutes later, a jogger in a blue t-shirt raises his fist as he passes the crowd. “Fuck yeah guys,” he says to cheers.By 10AM, the neighborhood event is coming to a close. Demonstrators start to trickle away, some fanning out to other rallies planned across LA today. Concordia is heading out too, microphone and speaker still in hand, “If you’re headed to downtown, watch out for suspicious crew cuts!” — Justine CalmaSan Francisco, California1/10Most of the crowd trickled out after 2pm, which was the scheduled end time of the protest, but hundreds stayed in the area. Image: Vjeran PavicLondon, UKLondon’s protest was a little different than most: it was almost entirely bereft of “No Kings” signs, thanks to the fact that about two miles away much larger crowds were gathered to celebrate the official birthday of one King Charles III. “We don’t have anything against King Charles,” Alyssa, a member of organizers Indivisible London, told me. And so, “out of respect for our host country as immigrants,” they instead set up shop in front of the US embassy with a tweaked message: “No kings, no crowns” became “no tyrants, no clowns.” London, UK. Image: Dominic PrestonOf the hundreds gathered, not everyone got the memo, with a few painted signs decrying kings and crowns regardless, and one brave Brit brandishing a bit of cardboard with a simple message: “Our king is better than yours!”London, UK. Image: Dominic PrestonStill, most of the crowd were on board, with red noses, clown suits, and Pennywise masks dotted throughout, plus costumes ranging from tacos to Roman emperors. “I think tyrants is the better word, and that’s why I dressed up as Caesar, because he was the original,” says Anna, a Long Island native who’s lived in London for three years. “Nobody likes a tyrant. Nobody. And they don’t do well, historically, but they destroy a lot.”For 90 minutes or so the crowd — predominantly American, judging by the accents around me — leaned into the circus theme. Speakers shared the stage with performers, from a comic singalong of anti-Trump protest songs to a protracted pantomime in which a woman in a banana costume exhorted the crowd to pelt a Donald Trump impersonator with fresh peels. London, UK. Image: Dominic PrestonDuring a break in festivities, Alyssa told the crowd, “The most threatening sound to an oligarch is laughter.”— Dominic PrestonProspect Park, Brooklyn, New YorkThe No Kings protest at Brooklyn’s Grand Army Plaza was a calmer affair. Instead of gathering under the picturesque memorial arch, protesters were largely sequestered to a corner right outside Prospect Park, with some streets blocked off by police. The weekly farmers market was in full swing, meaning people cradling bundles of rhubarb were swerving in and out of protest signs that read things like, “Hating Donald Trump is Brat” and “Is it time to get out the pitch forks?” Like during the Hands Off protest in April, New York got rain on Saturday.Prospect Park, Brooklyn. Image: Mia SatoThe area where protesters were gathered made it difficult to count the crowd, but there were hundreds — perhaps a few thousand — people that streamed in and out. At one point, some protesters began marching down the street alongside Prospect Park, while others stayed at Grand Army Plaza to chant, cheer, and hold signs up at oncoming vehicles. With its proximity to the public library, the park, and densely populated neighborhoods, the massive intersection is a high-foot traffic area. Cars blared their horns as they passed, American flags waving in the chilly afternoon breeze.Jane, a Brooklyn resident who stood on the curb opposite the protesters, said she isn’t typically someone who comes out to actions like this: before the No Kings event, she had only ever been to one protest, the Women’s March. (Jane asked that The Verge use her first name only.) Prospect Park, Brooklyn. Image: Mia Sato“I’m deeply concerned about our country,” Jane said, pausing as a long stream of trucks and cars honked continuously in support of the protesters in the background. “I think Trump is behaving as an authoritarian. We’ve seen in Russia, in Hungary, in Hong Kong, that the slide from freedom to not freedom is very fast and very quick if people do not make their voices heard,” Jane said. “I’m concerned that that’s what’s happening in the United States.” Jane also cited cuts to Medicaid and funding for academic research as well as tariffs as being “unacceptable.”Prospect Park, Brooklyn. Image: Mia SatoThe event was peaceful — there were lots of kids present — and people were in good spirits despite the rain. Protest signs ran the gamut from general anti-Trump slogans (“I trust light tampons more than this administration”) to New York City-specific causes like “Andrew Cuomo can’t read” (there is a contenious mayoral election this month). One sign read, “Fix your hearts or die,” an iconic line from the late director, David Lynch’s, Twin Peaks: The Return. And of course, amid nationwide immigration raids that have been escalated by the involvement of the federal government, ICE was top of mind: one sign simply read, “Melt ICE,” and another protester held a large “NO ICE IN NYC” sign. Though it was smaller and more contained than other events, the protest didn’t lack conviction: attendees of all ages stood in the cold rain, chanting and blowing into vuvuzela, banging the lids of pots and pans. At one point a man stood on the median on the street, leading the group in chants of “No justice, no peace.” Cars laid on the horn as they drove by.— Mia SatoAkron, OhioIt’s been raining pretty hard the last few days in Akron, OH, so much that I didn’t think there’d be a large turnout for our chapter of the No Kings protest. But I was emphatically proven wrong as the crowds I saw dwarfed the Tesla Takedown protests last month. Officially, the protest was to take place in front of the John F. Seiberling Federal Building on Main Street in Downtown Akron. But the concentration of people spilled over from that small space down Main Street and up Market Street. All told, though there were no official counts, I estimate somewhere between 500 to 900 people in this blue enclave in Northeast Ohio.The mood was exuberant, buoyed by supporters who honked their horns as they passed. The chorus of horns was nonstop, and when a sanitation truck honked as it went by, cheers got louder. The chants the crowds were singing took on a local flare. Ohio is the home of the Ohio State Buckeyes and anywhere you go, shout “O-H” and you’ll invariably get an “I-O” response. The crowds used that convention to make their own chant, “OH-IO, Donald Trump has got to go.”There was no police presence here and the crowd was very good at policing itself. Ostensibly out of concern for the incidents where people have rammed their cars into protestor crowds, the people here have taken up crossing guard duties, aiding folks who wish to cross Main or Market Streets. Toward the end of my time at the protest, I saw an older gentleman wearing Kent State gear and holding a sign that read, “Remember another time the National Guard was called in?” His sign featured a drawing of the famous photo from the event in which four Kent State students during a protest of the Vietnam War were killed by National Guard troops. I caught up with him to ask him some questions and he told me his name was Chuck Ayers, a professional cartoonist, and was present at the shooting. Akron, OH. Image: Ash Parrish“When I saw the National Guard in front of the federal building in LA,” he told me, “It was just another flashback.”He did not tell me this at the time, but Ayers is a nationally recognized cartoonist, noted for co-creating the comic strip Crankshaft. He’s lived in Ohio his entire life and of course, drew that sign himself. As he was telling me about how seeing news of the National Guard being deployed in LA, I could see him strain to hold back his emotions. He said it still hurts to see this 55 years later, but that he was heartened to see so many people standing here in community and solidarity. He also said that given his pain and trauma he almost didn’t come. When I asked why he showed up when it so obviously causes him pain he said simply, “Because I have to.”— Ash ParrishOneonta, New YorkOn a northward drive to Oneonta — population roughly 15,000, the largest city in New York’s mainly rural Otsego County — one of the most prominent landmarks is a sprawling barn splashed in huge, painted block letters with TRUMP 2024. (The final digits have been faithfully updated every election since 2016.) It’s Trump country, but not uniformly Trumpy country, as evidenced by what I estimated as a hundreds-strong crowd gathered in a field just below Main Street that came together with a friendly county-fair atmosphere. Kids sat on their parents’ shoulders; American flags fluttered next to signs with slogans like SHADE NEVER MADE ANYONE LESS GAY, and attendees grumbled persistently about the event’s feeble sound system, set up on the bed of a pickup truck. It was the kind of conspicuously patriotic, far-from-urban protest that the Trump administration has all but insisted doesn’t exist.Image: Adi RobertsonBeyond a general condemnation of Trump, protest signs repped the same issues being denounced across the country. The wars in Gaza and Ukraine made an appearance, as did Elon Musk and Tesla. A couple of people called out funding cuts for organizations like NPR, one neatly lettered sign reminded us that WEATHER FORECASTING SAVES LIVES, another warned “Keep your nasty little hands off Social Security,” and a lot — unsurprisingly, given the past week’s events — attacked mass deportations and ICE. An attendee who identified himself as Bill, standing behind a placard that blocked most of him from sight, laid out his anger at the administration’s gutting of the Environmental Protection Agency. “I think if it was not for protests, there would be no change,” he told me.The event itself, supported by a coalition including the local chapter of Indivisible, highlighted topics like reproductive justice and LGBTQ rights alongside issues for groups often stereotyped as Republican blocs — there was a speech about Department of Veterans Affairs cuts and a representative from the local Office for the Aging (whose words were mostly lost to the sound system’s whims). Rules for a march around the modest downtown were laid out: no blocking pedestrians or vehicles, and for the sake of families doing weekend shopping, watch the language. “Fuck!” one person yelled indistinctly from the audience. “No, no,” the event’s emcee chided gently. The philosophy, as she put it, was one of persuasion. “We want to build the resistance, not make people angry at us.”Image: Adi RobertsonBut even in a place that will almost certainly never see a National Guard deployment or the ire of a Truth Social post, the Trump administration’s brutal deportation program had just hit close to home. Only hours before the protest commenced, ICE agents were recorded handcuffing a man and removing him in an unmarked black car — detaining what was reportedly a legal resident seeking asylum from Venezuela. The mayor of Oneonta, Mark Drnek, relayed the news to the crowd. “ICE! We see you!” boomed Drnek from the truckbed. “We recognize you for what you are, and we understand, and we reject your vile purpose.”The crowd cheered furiously. The stars and stripes waved.- Adi RobertsonSee More: Policy
    0 Comentários 0 Compartilhamentos
  • New Bambu Labs Update after Reported Problems

    3D printer manufacturer Bambu Lab has issued a new update after an early fix was withdrawn. Termed a critical calibration bug, the company has acted swiftly to deliver new code to its many users.
    The Shenzhen-based company has now released firmware version V01.01.02.07 for its H2D 3D printer through its Public Beta Program. Rolled out on May 23, this update introduces a comprehensive set of new features, performance enhancements, and critical bug fixes designed to elevate print quality, expand hardware compatibility, and offer users greater control. The release builds on feedback gathered from earlier beta phases.
    The Bambu Lab H2D Laser Full Combo in a workshop. Image via Bambu Lab.
    Features and Improvements
    Firmware V01.01.02.07 adds native support for the CyberBrick time-lapse kit. It also expands the H2D’s onboard AI failure detection system, now giving users the ability to individually toggle detection functions for nozzle clumping, spaghetti printing, air printing, and purge chute pile-ups from the printer’s interface.
    Hardware compatibility has been further extended. The AMS 2 Pro and AMS HT systems now support RFID-based automatic matching of drying parameters and can perform drying operations without rotating spools. Additionally, the Laser & Cut module can now initiate tasks directly from USB drive files, improving workflow support.
    Performance updates include improved foreign object detection on the smooth PEI plate, better regulation of heatbed temperatures, enhanced first-layer quality, more reliable chamber temperature checks before printing begins, and improved accuracy of laser module flame detection. The update also enhances the accuracy of nozzle clumping and nozzle camera dirty detection, while optimizing the pre-purging strategy.
    A collision issue between the nozzle flow blocker and nozzle wiper—previously triggered during flow dynamics calibration—has been resolved. Calibration reliability for the liveview camera has also improved, and issues with pre-extrusion lines sticking to prints during layer transitions have been addressed.
    Bambu Lab H2D Launch. Image via Bambu Lab.
    However, two known issues remain in this beta release: detection of filament PTFE tube detachment is currently disabled, and users cannot adjust heatbed temperature via the Bambu Handy app. The latter is expected to be fixed in a future app update.
    This version replaces V01.01.02.04, which was briefly released on May 20 before being withdrawn due to a critical calibration bug. That earlier version caused the right nozzle to crash into the wiper during left-nozzle calibration, damaging the printer. The firmware also temporarily disabled filament detachment detection. Bambu Lab quickly pulled the update and advised users to revert to the previous stable firmware while working on a corrected release—now realized in version V01.01.02.07.
    Accessing the Firmware
    To access the beta firmware, users can opt into the Public Beta Program through the Bambu Handy app by navigating to the “Me” section and selecting “Beta Firmware Program.” Once enrolled, the update will be rolled out gradually. Participants can leave the program at any time and revert to the most recent stable firmware version. Bambu Lab recommends updating Bambu Studio Presets before installing the firmware to ensure full compatibility. Full technical documentation and the official changelog are available on Bambu Lab’s website.
    Bambu Lab Hardware Line: H2D and Beyond
    The new firmware update applies to the H2D 3D printer, Bambu Lab’s flagship desktop manufacturing system unveiled in March 2025. Designed for professional users, the H2D offers the company’s largest build volume to date—350 x 320 x 325 mm—and includes two new AMS systems with integrated filament drying. Dual-nozzle extrusion and servo-driven precision deliver high accuracy, while a 350°C hotend and 65°C heated chamber allow reliable printing with high-performance, fiber-reinforced materials. With a toolhead speed of up to 1000 mm/s and acceleration of 20,000 mm/s², the H2D is built for productivity without compromising quality.
    The Bambu Lab H2D’s digital cutter. Image via Bambu Lab.
    Bambu Lab’s broader portfolio also includes the X1E, released in 2023 as an enterprise-grade upgrade to its X1 series. Developed with professional and engineering applications in mind, the X1E features LAN-only connectivity for secure, offline operation, enhanced air filtration, and precise thermal regulation. An increased maximum nozzle temperature expands its material compatibility, making it suitable for demanding industrial applications. At its core, the X1E builds on the proven performance of the X1 Carbon, extending the system’s capabilities for use in sensitive or regulated environments.
    Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes.
    Who won the 2024 3D Printing Industry Awards?
    Subscribe to the3D Printing Industry newsletter to keep up with the latest 3D printing news.
    You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content.
    Featured image shows Bambu Lab H2D Launch. Image via Bambu Lab.

    Paloma Duran
    Paloma Duran holds a BA in International Relations and an MA in Journalism. Specializing in writing, podcasting, and content and event creation, she works across politics, energy, mining, and technology. With a passion for global trends, Paloma is particularly interested in the impact of technology like 3D printing on shaping our future.
    #new #bambu #labs #update #after
    New Bambu Labs Update after Reported Problems
    3D printer manufacturer Bambu Lab has issued a new update after an early fix was withdrawn. Termed a critical calibration bug, the company has acted swiftly to deliver new code to its many users. The Shenzhen-based company has now released firmware version V01.01.02.07 for its H2D 3D printer through its Public Beta Program. Rolled out on May 23, this update introduces a comprehensive set of new features, performance enhancements, and critical bug fixes designed to elevate print quality, expand hardware compatibility, and offer users greater control. The release builds on feedback gathered from earlier beta phases. The Bambu Lab H2D Laser Full Combo in a workshop. Image via Bambu Lab. Features and Improvements Firmware V01.01.02.07 adds native support for the CyberBrick time-lapse kit. It also expands the H2D’s onboard AI failure detection system, now giving users the ability to individually toggle detection functions for nozzle clumping, spaghetti printing, air printing, and purge chute pile-ups from the printer’s interface. Hardware compatibility has been further extended. The AMS 2 Pro and AMS HT systems now support RFID-based automatic matching of drying parameters and can perform drying operations without rotating spools. Additionally, the Laser & Cut module can now initiate tasks directly from USB drive files, improving workflow support. Performance updates include improved foreign object detection on the smooth PEI plate, better regulation of heatbed temperatures, enhanced first-layer quality, more reliable chamber temperature checks before printing begins, and improved accuracy of laser module flame detection. The update also enhances the accuracy of nozzle clumping and nozzle camera dirty detection, while optimizing the pre-purging strategy. A collision issue between the nozzle flow blocker and nozzle wiper—previously triggered during flow dynamics calibration—has been resolved. Calibration reliability for the liveview camera has also improved, and issues with pre-extrusion lines sticking to prints during layer transitions have been addressed. Bambu Lab H2D Launch. Image via Bambu Lab. However, two known issues remain in this beta release: detection of filament PTFE tube detachment is currently disabled, and users cannot adjust heatbed temperature via the Bambu Handy app. The latter is expected to be fixed in a future app update. This version replaces V01.01.02.04, which was briefly released on May 20 before being withdrawn due to a critical calibration bug. That earlier version caused the right nozzle to crash into the wiper during left-nozzle calibration, damaging the printer. The firmware also temporarily disabled filament detachment detection. Bambu Lab quickly pulled the update and advised users to revert to the previous stable firmware while working on a corrected release—now realized in version V01.01.02.07. Accessing the Firmware To access the beta firmware, users can opt into the Public Beta Program through the Bambu Handy app by navigating to the “Me” section and selecting “Beta Firmware Program.” Once enrolled, the update will be rolled out gradually. Participants can leave the program at any time and revert to the most recent stable firmware version. Bambu Lab recommends updating Bambu Studio Presets before installing the firmware to ensure full compatibility. Full technical documentation and the official changelog are available on Bambu Lab’s website. Bambu Lab Hardware Line: H2D and Beyond The new firmware update applies to the H2D 3D printer, Bambu Lab’s flagship desktop manufacturing system unveiled in March 2025. Designed for professional users, the H2D offers the company’s largest build volume to date—350 x 320 x 325 mm—and includes two new AMS systems with integrated filament drying. Dual-nozzle extrusion and servo-driven precision deliver high accuracy, while a 350°C hotend and 65°C heated chamber allow reliable printing with high-performance, fiber-reinforced materials. With a toolhead speed of up to 1000 mm/s and acceleration of 20,000 mm/s², the H2D is built for productivity without compromising quality. The Bambu Lab H2D’s digital cutter. Image via Bambu Lab. Bambu Lab’s broader portfolio also includes the X1E, released in 2023 as an enterprise-grade upgrade to its X1 series. Developed with professional and engineering applications in mind, the X1E features LAN-only connectivity for secure, offline operation, enhanced air filtration, and precise thermal regulation. An increased maximum nozzle temperature expands its material compatibility, making it suitable for demanding industrial applications. At its core, the X1E builds on the proven performance of the X1 Carbon, extending the system’s capabilities for use in sensitive or regulated environments. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. Who won the 2024 3D Printing Industry Awards? Subscribe to the3D Printing Industry newsletter to keep up with the latest 3D printing news. You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content. Featured image shows Bambu Lab H2D Launch. Image via Bambu Lab. Paloma Duran Paloma Duran holds a BA in International Relations and an MA in Journalism. Specializing in writing, podcasting, and content and event creation, she works across politics, energy, mining, and technology. With a passion for global trends, Paloma is particularly interested in the impact of technology like 3D printing on shaping our future. #new #bambu #labs #update #after
    3DPRINTINGINDUSTRY.COM
    New Bambu Labs Update after Reported Problems
    3D printer manufacturer Bambu Lab has issued a new update after an early fix was withdrawn. Termed a critical calibration bug, the company has acted swiftly to deliver new code to its many users. The Shenzhen-based company has now released firmware version V01.01.02.07 for its H2D 3D printer through its Public Beta Program. Rolled out on May 23, this update introduces a comprehensive set of new features, performance enhancements, and critical bug fixes designed to elevate print quality, expand hardware compatibility, and offer users greater control. The release builds on feedback gathered from earlier beta phases. The Bambu Lab H2D Laser Full Combo in a workshop. Image via Bambu Lab. Features and Improvements Firmware V01.01.02.07 adds native support for the CyberBrick time-lapse kit. It also expands the H2D’s onboard AI failure detection system, now giving users the ability to individually toggle detection functions for nozzle clumping, spaghetti printing, air printing, and purge chute pile-ups from the printer’s interface. Hardware compatibility has been further extended. The AMS 2 Pro and AMS HT systems now support RFID-based automatic matching of drying parameters and can perform drying operations without rotating spools. Additionally, the Laser & Cut module can now initiate tasks directly from USB drive files, improving workflow support. Performance updates include improved foreign object detection on the smooth PEI plate, better regulation of heatbed temperatures, enhanced first-layer quality, more reliable chamber temperature checks before printing begins, and improved accuracy of laser module flame detection. The update also enhances the accuracy of nozzle clumping and nozzle camera dirty detection, while optimizing the pre-purging strategy. A collision issue between the nozzle flow blocker and nozzle wiper—previously triggered during flow dynamics calibration—has been resolved. Calibration reliability for the liveview camera has also improved, and issues with pre-extrusion lines sticking to prints during layer transitions have been addressed. Bambu Lab H2D Launch. Image via Bambu Lab. However, two known issues remain in this beta release: detection of filament PTFE tube detachment is currently disabled, and users cannot adjust heatbed temperature via the Bambu Handy app. The latter is expected to be fixed in a future app update. This version replaces V01.01.02.04, which was briefly released on May 20 before being withdrawn due to a critical calibration bug. That earlier version caused the right nozzle to crash into the wiper during left-nozzle calibration, damaging the printer. The firmware also temporarily disabled filament detachment detection. Bambu Lab quickly pulled the update and advised users to revert to the previous stable firmware while working on a corrected release—now realized in version V01.01.02.07. Accessing the Firmware To access the beta firmware, users can opt into the Public Beta Program through the Bambu Handy app by navigating to the “Me” section and selecting “Beta Firmware Program.” Once enrolled, the update will be rolled out gradually. Participants can leave the program at any time and revert to the most recent stable firmware version. Bambu Lab recommends updating Bambu Studio Presets before installing the firmware to ensure full compatibility. Full technical documentation and the official changelog are available on Bambu Lab’s website. Bambu Lab Hardware Line: H2D and Beyond The new firmware update applies to the H2D 3D printer, Bambu Lab’s flagship desktop manufacturing system unveiled in March 2025. Designed for professional users, the H2D offers the company’s largest build volume to date—350 x 320 x 325 mm—and includes two new AMS systems with integrated filament drying. Dual-nozzle extrusion and servo-driven precision deliver high accuracy, while a 350°C hotend and 65°C heated chamber allow reliable printing with high-performance, fiber-reinforced materials. With a toolhead speed of up to 1000 mm/s and acceleration of 20,000 mm/s², the H2D is built for productivity without compromising quality. The Bambu Lab H2D’s digital cutter. Image via Bambu Lab. Bambu Lab’s broader portfolio also includes the X1E, released in 2023 as an enterprise-grade upgrade to its X1 series. Developed with professional and engineering applications in mind, the X1E features LAN-only connectivity for secure, offline operation, enhanced air filtration, and precise thermal regulation. An increased maximum nozzle temperature expands its material compatibility, making it suitable for demanding industrial applications. At its core, the X1E builds on the proven performance of the X1 Carbon, extending the system’s capabilities for use in sensitive or regulated environments. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. Who won the 2024 3D Printing Industry Awards? Subscribe to the3D Printing Industry newsletter to keep up with the latest 3D printing news. You can also follow us on LinkedIn, and subscribe to the 3D Printing Industry Youtube channel to access more exclusive content. Featured image shows Bambu Lab H2D Launch. Image via Bambu Lab. Paloma Duran Paloma Duran holds a BA in International Relations and an MA in Journalism. Specializing in writing, podcasting, and content and event creation, she works across politics, energy, mining, and technology. With a passion for global trends, Paloma is particularly interested in the impact of technology like 3D printing on shaping our future.
    0 Comentários 0 Compartilhamentos
  • Elegoo launches RFID ecosystem, invites user feedback for material authentication system

    Shenzhen-based 3D printer manufacturer Elegoo has introduced a new RFID Ecosystem for its upcoming printer line, including the upcoming Elegoo Saturn 4 Ultra. This system integrates RFID-tagged resin bottles, an Elegoo-designed scanner, and cloud-connected print profiles. Elegoo has opened a public feedback solicitation on its website and GitHub page to refine the implementation and encourage community input.
    The company is currently testing several use cases, such as automatic profile loading, material usage tracking, and batch traceability. Elegoo says these features aim to streamline workflow, reduce errors, and assist in quality assurance. However, in a GitHub post, the company emphasized that its RFID system is optional and will not lock users into proprietary materials.

    An open approach to a closed-loop trend?
    The Elegoo RFID Ecosystem enters a broader conversation in the additive manufacturingindustry regarding material-locking strategies and proprietary ecosystems. As discussed in a recent 3D Printing Industry analysis, the proliferation of closed systems has triggered renewed debate about interoperability, user autonomy, and long-term value for manufacturers and end-users alike.
    Elegoo appears to be taking a middle-ground approach: providing automation and traceability features via RFID while maintaining support for third-party materials. In the Elegoo RFID Tag Guide, developers are encouraged to create and test custom tags, with detailed instructions and example code provided to the open-source community.
    Developer-centric rollout
    The Elegoo Saturn 4 Ultra, which serves as the first testbed for the RFID system, uses a dedicated RFID reader to retrieve data from tags affixed to resin bottles. These tags store encoded information such as resin name, type, batch number, and print profile metadata. The printer’s firmware can automatically sync this information with cloud-hosted slicer settings for optimal prints.
    According to the company, future updates may include compatibility with other Elegoo printers and additional features like usage history logging, tamper detection, and resin validation for regulatory compliance.
    Color scheme guide possibly used for tag classification or UI indication in Elegoo’s RFID material system. Image via Elegoo.
    A call for collaboration
    In its official blog post, Elegoo invited users, developers, and material manufacturers to contribute feedback and propose new applications. The company has not yet announced a formal launch date for the ecosystem or its associated hardware.
    Elegoo, known for its budget-friendly resin and FDM printers, has been expanding its R&D efforts in recent years. With the RFID ecosystem, it now joins other AM firms experimenting with embedded metadata and smart materials integration to support traceability, security, and ease of use.
    Interoperability and user autonomy
    The debate about open vs closed ecosystems has increasingly intensified in additive manufacturing discussions. For example, Bambu Lab’s controversial firmware update that introduced new authentication protocols, sparking concerns about third-party compatibility and user autonomy. Subsequent coverage highlighted pushback from the open-source community, including Orca Slicer developers, who rejected integration with Bambu Connect over transparency and access concerns. These cases underscore how interoperability is not only a technical issue, but a strategic and ideological one shaping the future of the AM sector.RFID in 3D printing
    While RFID integration is more common in logistics and supply chain management, researchers and companies are beginning to explore its potential in 3D printing. Scientists at Swinburne University developed biosensing RFID tags using 3D printed hybrid liquids, enabling applications in health diagnostics and environmental sensing. Meanwhile, materials firm Supernova unveiled a new resin cartridge system embedded with RFID to improve compatibility and process control in high-viscosity 3D printing platforms. These developments suggest that RFID could play a growing role in material authentication, traceability, and automated workflow management within additive manufacturing ecosystems.Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news.
    You can also follow us onLinkedIn and subscribe to the 3D Printing Industry YouTube channel to access more exclusive content. At 3DPI, our mission is to deliver high-quality journalism, technical insight, and industry intelligence to professionals across the AM ecosystem.Help us shape the future of 3D printing industry news with our2025 reader survey.
    Featured image shows Elegoo RFID system displayed on a resin bottle, designed to communicate encoded material data to the printer. Image via Elegoo.
    #elegoo #launches #rfid #ecosystem #invites
    Elegoo launches RFID ecosystem, invites user feedback for material authentication system
    Shenzhen-based 3D printer manufacturer Elegoo has introduced a new RFID Ecosystem for its upcoming printer line, including the upcoming Elegoo Saturn 4 Ultra. This system integrates RFID-tagged resin bottles, an Elegoo-designed scanner, and cloud-connected print profiles. Elegoo has opened a public feedback solicitation on its website and GitHub page to refine the implementation and encourage community input. The company is currently testing several use cases, such as automatic profile loading, material usage tracking, and batch traceability. Elegoo says these features aim to streamline workflow, reduce errors, and assist in quality assurance. However, in a GitHub post, the company emphasized that its RFID system is optional and will not lock users into proprietary materials. An open approach to a closed-loop trend? The Elegoo RFID Ecosystem enters a broader conversation in the additive manufacturingindustry regarding material-locking strategies and proprietary ecosystems. As discussed in a recent 3D Printing Industry analysis, the proliferation of closed systems has triggered renewed debate about interoperability, user autonomy, and long-term value for manufacturers and end-users alike. Elegoo appears to be taking a middle-ground approach: providing automation and traceability features via RFID while maintaining support for third-party materials. In the Elegoo RFID Tag Guide, developers are encouraged to create and test custom tags, with detailed instructions and example code provided to the open-source community. Developer-centric rollout The Elegoo Saturn 4 Ultra, which serves as the first testbed for the RFID system, uses a dedicated RFID reader to retrieve data from tags affixed to resin bottles. These tags store encoded information such as resin name, type, batch number, and print profile metadata. The printer’s firmware can automatically sync this information with cloud-hosted slicer settings for optimal prints. According to the company, future updates may include compatibility with other Elegoo printers and additional features like usage history logging, tamper detection, and resin validation for regulatory compliance. Color scheme guide possibly used for tag classification or UI indication in Elegoo’s RFID material system. Image via Elegoo. A call for collaboration In its official blog post, Elegoo invited users, developers, and material manufacturers to contribute feedback and propose new applications. The company has not yet announced a formal launch date for the ecosystem or its associated hardware. Elegoo, known for its budget-friendly resin and FDM printers, has been expanding its R&D efforts in recent years. With the RFID ecosystem, it now joins other AM firms experimenting with embedded metadata and smart materials integration to support traceability, security, and ease of use. Interoperability and user autonomy The debate about open vs closed ecosystems has increasingly intensified in additive manufacturing discussions. For example, Bambu Lab’s controversial firmware update that introduced new authentication protocols, sparking concerns about third-party compatibility and user autonomy. Subsequent coverage highlighted pushback from the open-source community, including Orca Slicer developers, who rejected integration with Bambu Connect over transparency and access concerns. These cases underscore how interoperability is not only a technical issue, but a strategic and ideological one shaping the future of the AM sector.RFID in 3D printing While RFID integration is more common in logistics and supply chain management, researchers and companies are beginning to explore its potential in 3D printing. Scientists at Swinburne University developed biosensing RFID tags using 3D printed hybrid liquids, enabling applications in health diagnostics and environmental sensing. Meanwhile, materials firm Supernova unveiled a new resin cartridge system embedded with RFID to improve compatibility and process control in high-viscosity 3D printing platforms. These developments suggest that RFID could play a growing role in material authentication, traceability, and automated workflow management within additive manufacturing ecosystems.Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news. You can also follow us onLinkedIn and subscribe to the 3D Printing Industry YouTube channel to access more exclusive content. At 3DPI, our mission is to deliver high-quality journalism, technical insight, and industry intelligence to professionals across the AM ecosystem.Help us shape the future of 3D printing industry news with our2025 reader survey. Featured image shows Elegoo RFID system displayed on a resin bottle, designed to communicate encoded material data to the printer. Image via Elegoo. #elegoo #launches #rfid #ecosystem #invites
    3DPRINTINGINDUSTRY.COM
    Elegoo launches RFID ecosystem, invites user feedback for material authentication system
    Shenzhen-based 3D printer manufacturer Elegoo has introduced a new RFID Ecosystem for its upcoming printer line, including the upcoming Elegoo Saturn 4 Ultra. This system integrates RFID-tagged resin bottles, an Elegoo-designed scanner, and cloud-connected print profiles. Elegoo has opened a public feedback solicitation on its website and GitHub page to refine the implementation and encourage community input. The company is currently testing several use cases, such as automatic profile loading, material usage tracking, and batch traceability. Elegoo says these features aim to streamline workflow, reduce errors, and assist in quality assurance. However, in a GitHub post, the company emphasized that its RFID system is optional and will not lock users into proprietary materials. An open approach to a closed-loop trend? The Elegoo RFID Ecosystem enters a broader conversation in the additive manufacturing (AM) industry regarding material-locking strategies and proprietary ecosystems. As discussed in a recent 3D Printing Industry analysis, the proliferation of closed systems has triggered renewed debate about interoperability, user autonomy, and long-term value for manufacturers and end-users alike. Elegoo appears to be taking a middle-ground approach: providing automation and traceability features via RFID while maintaining support for third-party materials. In the Elegoo RFID Tag Guide, developers are encouraged to create and test custom tags, with detailed instructions and example code provided to the open-source community. Developer-centric rollout The Elegoo Saturn 4 Ultra, which serves as the first testbed for the RFID system, uses a dedicated RFID reader to retrieve data from tags affixed to resin bottles. These tags store encoded information such as resin name, type, batch number, and print profile metadata. The printer’s firmware can automatically sync this information with cloud-hosted slicer settings for optimal prints. According to the company, future updates may include compatibility with other Elegoo printers and additional features like usage history logging, tamper detection, and resin validation for regulatory compliance. Color scheme guide possibly used for tag classification or UI indication in Elegoo’s RFID material system. Image via Elegoo. A call for collaboration In its official blog post, Elegoo invited users, developers, and material manufacturers to contribute feedback and propose new applications. The company has not yet announced a formal launch date for the ecosystem or its associated hardware. Elegoo, known for its budget-friendly resin and FDM printers, has been expanding its R&D efforts in recent years. With the RFID ecosystem, it now joins other AM firms experimenting with embedded metadata and smart materials integration to support traceability, security, and ease of use. Interoperability and user autonomy The debate about open vs closed ecosystems has increasingly intensified in additive manufacturing discussions. For example, Bambu Lab’s controversial firmware update that introduced new authentication protocols, sparking concerns about third-party compatibility and user autonomy. Subsequent coverage highlighted pushback from the open-source community, including Orca Slicer developers, who rejected integration with Bambu Connect over transparency and access concerns. These cases underscore how interoperability is not only a technical issue, but a strategic and ideological one shaping the future of the AM sector.RFID in 3D printing While RFID integration is more common in logistics and supply chain management, researchers and companies are beginning to explore its potential in 3D printing. Scientists at Swinburne University developed biosensing RFID tags using 3D printed hybrid liquids, enabling applications in health diagnostics and environmental sensing. Meanwhile, materials firm Supernova unveiled a new resin cartridge system embedded with RFID to improve compatibility and process control in high-viscosity 3D printing platforms. These developments suggest that RFID could play a growing role in material authentication, traceability, and automated workflow management within additive manufacturing ecosystems.Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news. You can also follow us onLinkedIn and subscribe to the 3D Printing Industry YouTube channel to access more exclusive content. At 3DPI, our mission is to deliver high-quality journalism, technical insight, and industry intelligence to professionals across the AM ecosystem.Help us shape the future of 3D printing industry news with our2025 reader survey. Featured image shows Elegoo RFID system displayed on a resin bottle, designed to communicate encoded material data to the printer. Image via Elegoo.
    0 Comentários 0 Compartilhamentos
  • Nothing Phone 3D printing contest in new Prusa challenge

    A new contest is underway, inviting designers and 3D printing enthusiasts to create custom accessories for the CMF Phone 2 Pro, a modular smartphone from CMF by Nothing.
    Organized in partnership with Czech based 3D printer manufacturer Prusa Research, the contest focuses on designs that enhance the phone’s appearance, functionality, or usability. Open for another 22 days, the contest allows each participant to submit up to five entries. 
    At the time of writing, 225 submissions have been received. Designers are encouraged to develop back covers, attachments, or other accessories that align with the CMF Phone 2 Pro’s structure. The phone features visible screws and a universal adaptor, making it compatible with a range of physical modifications.
    “We’ve teamed up with our friends at Prusa to launch a design challenge built around CMF Phone 2 Pro and its all-new Universal Cover. The best of the best will be able to bring their design to life with a brand new CMF Phone 2 Pro and Original Prusa MK4S 3D printer. Plus more prizes up for grabs,” said the CMF team.
    Phone Stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables.
    “Make tech fun” with 3D printing
    Entries may focus on convenience, additional features, or purely visual elements, but only accessories tailored to the CMF Phone 2 Pro will be accepted. General-purpose phone stands or unrelated designs do not qualify. To ensure accessibility, CMF has provided all the necessary files, measurements, and design references for those who don’t own the device.
    Prizes for the Top Three Entries:

    1st Place: Original Prusa MK4S Kit and CMF Phone 2 Pro
    2nd Place: CMF Phone 2 Pro, CMF Buds Pro 2, and 1200 Prusameters
    3rd Place: CMF Phone 2 Pro and 800 Prusameters

    This isn’t the first time CMF by Nothing has involved the maker community. Last year, the brand collaborated with Chinese desktop 3D printer manufacturer Bambu Lab on a similar initiative focused on the CMF Phone 1. That contest, hosted on MakerWorld, asked designers to create custom components for the phone’s modular design. Participants had access to STEP files and technical specs to assist in the development of precise designs.
    The 2024 contest recognized winners in three categories: Best Functional, Best-Looking, and Most Unexpected. Judges included creators from the 3D printing space such as 3D Printing Nerd and Unnecessary Inventions, along with Nothing Co-Founder Akis Evangelidis, who emphasized the company’s commitment to co-creation with its user base.
    Building on that approach, the new contest continues CMF’s engagement with the design and 3D printing community, this time hosted on Printables.com, where users can find entry guidelines, design files, and current submissions.
    The Ultimate Magnetic Camera Cage for CMF Phone 2 PRO. Photo via user 3D Kimba/Printables.
    Shaping mobile accessories with 3D printing
    With 3D printing increasingly shaping how mobile accessories are developed, companies have started turning to open design challenges and in-house production to rethink both customization and manufacturing.
    Accessories company Incase and 3D printer manufacturer Carbon entered a multi-year R&D partnership to develop and mass-produce 3D printed mobile device protectors using Carbon’s Digital Light Synthesistechnology. As part of the deal, Incase gained access to 20 Carbon M2 printers, proprietary software, and exclusive rights to co-brand products made with the process. 
    The protectors were designed with complex lattice structures and new elastomers that offer enhanced impact protection in a lightweight form. This partnership also streamlined design and production, enabling faster iteration, reduced prototyping, and on-demand manufacturing
    Elsewhere, Netherlands-based 3D printer manufacturer Ultimaker kicked off a contest inviting users to design accessories for the OnePlus One smartphone and share them on Youmagine. In just a week, the platform saw a wave of submissions, with several downloadable designs quickly appearing online. 
    To make things interesting, Ultimaker offered participants a chance to win either an Ultimaker 2 or a OnePlus One. Once the entry period ended, the public helped narrow down the field by voting for their favorites. From those finalists, judges from both Ultimaker and OnePlus chose the top three winning designs.
    Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes.
    What 3D printing trends should you watch out for in 2025?
    How is the future of 3D printing shaping up?
    To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on Twitter, or like our page on Facebook.
    While you’re here, why not subscribe to our Youtube channel? Featuring discussion, debriefs, video shorts, and webinar replays.
    Featured image shows phone stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables.
    #nothing #phone #printing #contest #new
    Nothing Phone 3D printing contest in new Prusa challenge
    A new contest is underway, inviting designers and 3D printing enthusiasts to create custom accessories for the CMF Phone 2 Pro, a modular smartphone from CMF by Nothing. Organized in partnership with Czech based 3D printer manufacturer Prusa Research, the contest focuses on designs that enhance the phone’s appearance, functionality, or usability. Open for another 22 days, the contest allows each participant to submit up to five entries.  At the time of writing, 225 submissions have been received. Designers are encouraged to develop back covers, attachments, or other accessories that align with the CMF Phone 2 Pro’s structure. The phone features visible screws and a universal adaptor, making it compatible with a range of physical modifications. “We’ve teamed up with our friends at Prusa to launch a design challenge built around CMF Phone 2 Pro and its all-new Universal Cover. The best of the best will be able to bring their design to life with a brand new CMF Phone 2 Pro and Original Prusa MK4S 3D printer. Plus more prizes up for grabs,” said the CMF team. Phone Stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables. “Make tech fun” with 3D printing Entries may focus on convenience, additional features, or purely visual elements, but only accessories tailored to the CMF Phone 2 Pro will be accepted. General-purpose phone stands or unrelated designs do not qualify. To ensure accessibility, CMF has provided all the necessary files, measurements, and design references for those who don’t own the device. Prizes for the Top Three Entries: 1st Place: Original Prusa MK4S Kit and CMF Phone 2 Pro 2nd Place: CMF Phone 2 Pro, CMF Buds Pro 2, and 1200 Prusameters 3rd Place: CMF Phone 2 Pro and 800 Prusameters This isn’t the first time CMF by Nothing has involved the maker community. Last year, the brand collaborated with Chinese desktop 3D printer manufacturer Bambu Lab on a similar initiative focused on the CMF Phone 1. That contest, hosted on MakerWorld, asked designers to create custom components for the phone’s modular design. Participants had access to STEP files and technical specs to assist in the development of precise designs. The 2024 contest recognized winners in three categories: Best Functional, Best-Looking, and Most Unexpected. Judges included creators from the 3D printing space such as 3D Printing Nerd and Unnecessary Inventions, along with Nothing Co-Founder Akis Evangelidis, who emphasized the company’s commitment to co-creation with its user base. Building on that approach, the new contest continues CMF’s engagement with the design and 3D printing community, this time hosted on Printables.com, where users can find entry guidelines, design files, and current submissions. The Ultimate Magnetic Camera Cage for CMF Phone 2 PRO. Photo via user 3D Kimba/Printables. Shaping mobile accessories with 3D printing With 3D printing increasingly shaping how mobile accessories are developed, companies have started turning to open design challenges and in-house production to rethink both customization and manufacturing. Accessories company Incase and 3D printer manufacturer Carbon entered a multi-year R&D partnership to develop and mass-produce 3D printed mobile device protectors using Carbon’s Digital Light Synthesistechnology. As part of the deal, Incase gained access to 20 Carbon M2 printers, proprietary software, and exclusive rights to co-brand products made with the process.  The protectors were designed with complex lattice structures and new elastomers that offer enhanced impact protection in a lightweight form. This partnership also streamlined design and production, enabling faster iteration, reduced prototyping, and on-demand manufacturing Elsewhere, Netherlands-based 3D printer manufacturer Ultimaker kicked off a contest inviting users to design accessories for the OnePlus One smartphone and share them on Youmagine. In just a week, the platform saw a wave of submissions, with several downloadable designs quickly appearing online.  To make things interesting, Ultimaker offered participants a chance to win either an Ultimaker 2 or a OnePlus One. Once the entry period ended, the public helped narrow down the field by voting for their favorites. From those finalists, judges from both Ultimaker and OnePlus chose the top three winning designs. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. What 3D printing trends should you watch out for in 2025? How is the future of 3D printing shaping up? To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on Twitter, or like our page on Facebook. While you’re here, why not subscribe to our Youtube channel? Featuring discussion, debriefs, video shorts, and webinar replays. Featured image shows phone stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables. #nothing #phone #printing #contest #new
    3DPRINTINGINDUSTRY.COM
    Nothing Phone 3D printing contest in new Prusa challenge
    A new contest is underway, inviting designers and 3D printing enthusiasts to create custom accessories for the CMF Phone 2 Pro, a modular smartphone from CMF by Nothing. Organized in partnership with Czech based 3D printer manufacturer Prusa Research, the contest focuses on designs that enhance the phone’s appearance, functionality, or usability. Open for another 22 days, the contest allows each participant to submit up to five entries.  At the time of writing, 225 submissions have been received. Designers are encouraged to develop back covers, attachments, or other accessories that align with the CMF Phone 2 Pro’s structure. The phone features visible screws and a universal adaptor, making it compatible with a range of physical modifications. “We’ve teamed up with our friends at Prusa to launch a design challenge built around CMF Phone 2 Pro and its all-new Universal Cover. The best of the best will be able to bring their design to life with a brand new CMF Phone 2 Pro and Original Prusa MK4S 3D printer. Plus more prizes up for grabs,” said the CMF team. Phone Stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables. “Make tech fun” with 3D printing Entries may focus on convenience, additional features, or purely visual elements, but only accessories tailored to the CMF Phone 2 Pro will be accepted. General-purpose phone stands or unrelated designs do not qualify. To ensure accessibility, CMF has provided all the necessary files, measurements, and design references for those who don’t own the device. Prizes for the Top Three Entries: 1st Place: Original Prusa MK4S Kit and CMF Phone 2 Pro 2nd Place: CMF Phone 2 Pro, CMF Buds Pro 2, and 1200 Prusameters 3rd Place: CMF Phone 2 Pro and 800 Prusameters This isn’t the first time CMF by Nothing has involved the maker community. Last year, the brand collaborated with Chinese desktop 3D printer manufacturer Bambu Lab on a similar initiative focused on the CMF Phone 1. That contest, hosted on MakerWorld, asked designers to create custom components for the phone’s modular design. Participants had access to STEP files and technical specs to assist in the development of precise designs. The 2024 contest recognized winners in three categories: Best Functional, Best-Looking, and Most Unexpected. Judges included creators from the 3D printing space such as 3D Printing Nerd and Unnecessary Inventions, along with Nothing Co-Founder Akis Evangelidis, who emphasized the company’s commitment to co-creation with its user base. Building on that approach, the new contest continues CMF’s engagement with the design and 3D printing community, this time hosted on Printables.com, where users can find entry guidelines, design files, and current submissions. The Ultimate Magnetic Camera Cage for CMF Phone 2 PRO. Photo via user 3D Kimba/Printables. Shaping mobile accessories with 3D printing With 3D printing increasingly shaping how mobile accessories are developed, companies have started turning to open design challenges and in-house production to rethink both customization and manufacturing. Accessories company Incase and 3D printer manufacturer Carbon entered a multi-year R&D partnership to develop and mass-produce 3D printed mobile device protectors using Carbon’s Digital Light Synthesis (DLS) technology. As part of the deal, Incase gained access to 20 Carbon M2 printers, proprietary software, and exclusive rights to co-brand products made with the process.  The protectors were designed with complex lattice structures and new elastomers that offer enhanced impact protection in a lightweight form. This partnership also streamlined design and production, enabling faster iteration, reduced prototyping, and on-demand manufacturing Elsewhere, Netherlands-based 3D printer manufacturer Ultimaker kicked off a contest inviting users to design accessories for the OnePlus One smartphone and share them on Youmagine. In just a week, the platform saw a wave of submissions, with several downloadable designs quickly appearing online.  To make things interesting, Ultimaker offered participants a chance to win either an Ultimaker 2 or a OnePlus One. Once the entry period ended, the public helped narrow down the field by voting for their favorites. From those finalists, judges from both Ultimaker and OnePlus chose the top three winning designs. Take the 3DPI Reader Survey — shape the future of AM reporting in under 5 minutes. What 3D printing trends should you watch out for in 2025? How is the future of 3D printing shaping up? To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on Twitter, or like our page on Facebook. While you’re here, why not subscribe to our Youtube channel? Featuring discussion, debriefs, video shorts, and webinar replays. Featured image shows phone stand for CMF Phone 2 PRO. Photo via user GRZ Design/Printables.
    0 Comentários 0 Compartilhamentos
  • The brilliant 3D printer I used to print this Deadpool helmet is on sale

    I used the Bambu Lab X1C to print this Deadpool helmet – and now it's on sale
    #brilliant #printer #used #print #this
    The brilliant 3D printer I used to print this Deadpool helmet is on sale
    I used the Bambu Lab X1C to print this Deadpool helmet – and now it's on sale #brilliant #printer #used #print #this
    WWW.CREATIVEBLOQ.COM
    The brilliant 3D printer I used to print this Deadpool helmet is on sale
    I used the Bambu Lab X1C to print this Deadpool helmet – and now it's on sale
    0 Comentários 0 Compartilhamentos