“This is a piss-poor excuse for a controller.” That’s how repair-focused YouTube channel iFixit starts its negative review of the Nintendo Switch 2 Pro Controller. The repair and tech experts suggest the pricey controller is a “nightmare” to repair a

Key Takeaways New EU rules take effect June 20, 2025, requiring mobile phones and tablets to be easier and cheaper to repair, including mandatory access to spare parts for up to seven years. Devices must meet durability standards, such as resistance to drops, water, and dust, and batteries must retain 80% capacity after 800 cycles. Manufacturers must offer 5 years of software updates and grant repair professionals access to firmware and repair tools to ensure long-term device usability. Energy consumption is expected to drop, with households projected to save €98 over five years due to longer-lasting, more repairable devices. In a win for the right to repair, the European Union (EU) has released its new energy labeling and ecodesign requirements for mobile phones, tablets, and even cordless phones.  Once implemented, this would help extend the product lifetime of these devices by making them cheaper and easier to repair. Up Ahead: Long-Lasting and Easy-to-Repair Devices The new ecodesign and energy labeling regulations will apply to devices sold in the EU effective June 20, 2025. One key area is the availability of spare parts. Once the regulations take effect, critical spare parts for a device must remain available for seven years from the last day the producer stops selling it. These parts must also be available to repairers within 5–10 working days. Mobile phones, cordless phones, and tablets under the ecodesign regulations must also be resistant to scratches and accidental drops, and be protected from dust and water.  The EU also specified that batteries must withstand at least 800 charge and discharge cycles while holding 80% of their initial capacity. These measures could help ensure devices last longer, thus reducing the need to replace them and lowering their cost of ownership. The requirements go beyond just the hardware. On the software side, manufacturers must also provide at least 5 years of operating system upgrades and give professional repairers access to software or firmware.  These would allow devices to continue to run smoothly and protect them from security vulnerabilities. On top of the ecodesign requirements, the EU also specified energy labeling requirements on the applicable devices. The labels would provide information about the device’s repairability score, energy efficiency, battery longevity, dust and water protection, and resistance to accidental drops. Having clear and easy-to-understand labels can help consumers in the EU make better choices when buying phones and tablets. They’ll know at a glance whether a device can withstand drops or if the batteries will remain reliable for as long as possible. The Projected Impact of the Ecodesign and Energy Labeling Requirements With the new requirements, the EU expects a significant reduction in the energy consumption of the applicable devices. Regarding charging time, this should go down from 2.5 to 1.75 hours per day.  Also, the annual electrical consumption of high-end smartphones is projected to decrease by 25%, while it’s 23% for tablets by 2030. Making devices easier to repair is also seen to reduce the acquisition costs of devices by € 98 per household in five years. A Win for the Right to Repair, But Obstacles Lie Ahead While the EU has already made significant progress in the area of the right to repair, many countries remain well behind. In the US, for instance, only a handful of states like California and Colorado have already enacted right-to-repair laws, while most of the country has yet to catch up. Without laws like these, most manufacturers won’t have the incentive to make their devices easier to repair.  A quick look at iFixit’s smartphone repairability scores shows that only Fairphone, which scored a perfect 10, HMD (9), and Nokia (8) had high scores among current phones. At the same time, Apple’s iPhone 16 line received a respectable 7. The Fairphone 5, launched in 2023, is especially notable for its repairability. According to iFixit, it’s easy to disassemble with common tools, the battery can be replaced quickly, and manuals and replacement parts are available to DIYers. As for the others, Ifixit gave Google’s Pixel 9 series a 5 for making it difficult to remove the battery and the USB-C port and requiring a replacement adhesive to secure the screen or back glass instead of using clips or fasteners. Meanwhile, the Samsung Galaxy S23 Ultra received a 4 because the battery is attached with a strong adhesive, and repairing the screen needs a lot of disassembly. All in all, we remain hopeful that with the EU’s lead, manufacturers can finally be encouraged to make repairing their devices easier than ever before. As technology continues to evolve—from the return of 'dumbphones' to faster and sleeker computers—seasoned tech journalist, Cedric Solidon, continues to dedicate himself to writing stories that inform, empower, and connect with readers across all levels of digital literacy. With 20 years of professional writing experience, this University of the Philippines Journalism graduate has carved out a niche as a trusted voice in tech media. Whether he's breaking down the latest advancements in cybersecurity or explaining how silicon-carbon batteries can extend your phone’s battery life, his writing remains rooted in clarity, curiosity, and utility. Long before he was writing for Techreport, HP, Citrix, SAP, Globe Telecom, CyberGhost VPN, and ExpressVPN, Cedric's love for technology began at home courtesy of a Nintendo Family Computer and a stack of tech magazines. Growing up, his days were often filled with sessions of Contra, Bomberman, Red Alert 2, and the criminally underrated Crusader: No Regret. But gaming wasn't his only gateway to tech.  He devoured every T3, PCMag, and PC Gamer issue he could get his hands on, often reading them cover to cover. It wasn’t long before he explored the early web in IRC chatrooms, online forums, and fledgling tech blogs, soaking in every byte of knowledge from the late '90s and early 2000s internet boom. That fascination with tech didn’t just stick. It evolved into a full-blown calling. After graduating with a degree in Journalism, he began his writing career at the dawn of Web 2.0. What started with small editorial roles and freelance gigs soon grew into a full-fledged career. He has since collaborated with global tech leaders, lending his voice to content that bridges technical expertise with everyday usability. He’s also written annual reports for Globe Telecom and consumer-friendly guides for VPN companies like CyberGhost and ExpressVPN, empowering readers to understand the importance of digital privacy. His versatility spans not just tech journalism but also technical writing. He once worked with a local tech company developing web and mobile apps for logistics firms, crafting documentation and communication materials that brought together user-friendliness with deep technical understanding. That experience sharpened his ability to break down dense, often jargon-heavy material into content that speaks clearly to both developers and decision-makers. At the heart of his work lies a simple belief: technology should feel empowering, not intimidating. Even if the likes of smartphones and AI are now commonplace, he understands that there's still a knowledge gap, especially when it comes to hardware or the real-world benefits of new tools. His writing hopes to help close that gap. Cedric’s writing style reflects that mission. It’s friendly without being fluffy and informative without being overwhelming. Whether writing for seasoned IT professionals or casual readers curious about the latest gadgets, he focuses on how a piece of technology can improve our lives, boost our productivity, or make our work more efficient. That human-first approach makes his content feel more like a conversation than a technical manual. As his writing career progresses, his passion for tech journalism remains as strong as ever. With the growing need for accessible, responsible tech communication, he sees his role not just as a journalist but as a guide who helps readers navigate a digital world that’s often as confusing as it is exciting. From reviewing the latest devices to unpacking global tech trends, Cedric isn’t just reporting on the future; he’s helping to write it. View all articles by Cedric Solidon Our editorial process The Tech Report editorial policy is centered on providing helpful, accurate content that offers real value to our readers. We only work with experienced writers who have specific knowledge in the topics they cover, including latest developments in technology, online privacy, cryptocurrencies, software, and more. Our editorial policy ensures that each topic is researched and curated by our in-house editors. We maintain rigorous journalistic standards, and every article is 100% written by real authors.

Many of us want the right to repair our own devices, and at least with Apple products, things have been moving in the right direction on that front. Three years ago, Apple launched its self-service repair program, which finally gave people access to the tools and repair manuals needed to fix their broken Apple products for themselves. The program launched with support for iPhone repairs, and it later added some Macs, the Beats Pill speaker, and the Apple Studio Display to its roster as well. Now, Apple is expanding its self-service repair program to include some iPad models.Which iPads can I repair?Unfortunately, not all iPads are in the self-repair program at the moment. From May 29, 2025, Apple will add the following iPads to the program: iPad Air (M2 and later), iPad Pro (M4), iPad mini (A17 Pro), and iPad (A16). This matches the list of iPads Apple will currently accept for official mail-in or in-shop repairs. If you have a different iPad, then you'll instead have to try your luck with third-party repair shops such as iFixit.How to repair your broken iPadStart your self-repair journey by downloading the appropriate repair manual from Apple's website. Go through your manual to learn more about your device and how to repair it, and once you're ready, place an order for the necessary tools and parts. The good news here is that you can buy or rent Apple-approved iPad repair tools and replacement parts directly from the company. All available products are listed on Apple's Self Service Repair Store. Plus, authorized third-party repair shops also now have access to these tools, too, if you'd prefer to get some in-person help with your repair but can't make it to an Apple location. At time of writing, iPads still weren't listed on the site, so the exact pricing of different types of repair isn't available yet. In the meantime, let's take a look at repair costs for an iPhone 16 Pro Max to get an estimate of what the prices could be. As an example, repairing an iPhone 16 Pro Max's display costs a hefty $379, and repairing the battery costs $119. In some cases, you can return the replaced part to Apple and receive a credit, which should ease the burden on your wallet. For the aforementioned display repair, the credit offered is just $19, but it's $57 for the battery, which is quite good.iPads are bigger than any iPhone, so you can expect repair prices to be higher for them, too. Note, also, that you may sometimes have to enter the serial number of your iPad before placing your parts order, so don't expect to be able to keep a stockpile of parts on hand. Repairing iPads (and other Apple products) is a great idea for those who are comfortable tinkering with hardware, but even if you're not one of those people, this announcement is still good news, since programs like these allow your friendly neighborhood repair shop to stock genuine parts, too.

Silicon Valley nerds have been lonelier since Fry’s Electronics shut down in February 2021 in the midst of the pandemic. The electronics store chain was an embodiment of the valley’s tech roots. But Micro Center, an electronics retailer from Ohio, has opened its 29th store in Santa Clara, California. And so the nerd kingdom has returned. I see this as a big deal, following up on the opening of the Nintendo store — the second in the country after New York — in San Francisco earlier this month. After years of bad economic news, it’s nice to see signs that the Bay Area is coming back. No. To answer your question, nerds cannot live at the Micro Center store. But this isn’t just any store. It’s a symbol — a sign that shows tech still has a physical presence in Silicon Valley, in addition to places like the Buck’s Restaurant, the Denny’s where Nvidia started, the Intel Museum, the Computer History Museum, the California Academy of Sciences and the Tech Museum of Innovation. Other historic hangouts for techies like Walker’s Wagon Wheel, Atari’s headquarters, Lion & Compass — even Circuit City — have long since closed. But hey, we’ve got the Micro Center store, and the Apple spaceship is not that far away. The grand opening week has been going well and I got a tour of the superstore from Dan Ackerman, a veteran tech journalist who is editor-in-chief at Micro Center News. As I walked into the place, Ackerman was finishing a chat with iFixit, a tech repair publication which has its own space for podcasts inside the store. That was unexpected, as I’ve never seen a store embrace social media in such a way. Can you stump the geniuses at the Knowledge Bar at Micro Center? Nearby was the Knowledge Bar, where you can get all your tech questions answered — much like the Genius Bars in Apple Stores. And there were repair tables out in the open. There are a lot of things for tech enthusiasts can like about Micro Center. First, it’s not as sprawling as Fry’s, which had zany themes like ancient Egypt and a weird mix of electronics goods as well as household appliances, cosmetics, magazines and tons of snack foods. (The Egyptian-themed Campbell, California Fry’s store that I drove by often was 156,000 square feet, and now it’s home to a pickleball court complex). Fry’s was a store that stereotyped nerds and Silicon Valley, which also had its own HBO television show that carried on the stereotypes. Nvidia’s latest RTX 50 Series GPUs were in stock at Micro Center. The Micro Center store, by contrast, is smaller at 40,000 square feet and stocked with many more practical nerd items. For the grand opening, this store had the very practical product of more than 4,000 graphics processing units (GPUs) in stock from Nvidia (which just launched its 50 Series GPUs) and AMD, Ackerman told me. Some of those graphics cards cost as much as $4,000. Not to be outdone. AMD has a row of GPUs at Micro Center too. “There were people waiting to get to the GPUs,” Ackerman said. On display was a gold-plated graphics card that was being auctioned off for charity. It was signed by Jensen Huang, Nvidia CEO. Nvidia CEO Jensen Huang signed this GPU being auctioned for charity at Micro Center. “I joke that whoever wins the bid should get a Jensen leather jacket as well,” said Ackerman. And this Micro Center store has a good location (5201 Stevens Creek Boulevard in Santa Clara) that is just a six-minute drive from Apple’s worldwide headquarters and (perhaps better yet) a one-minute walk from the Korean Hair Salon. Micro Center had a previous store in Silicon Valley, near Intel’s headquarters in Santa Clara. But that store close in 2012 because the company couldn’t negotiate better terms with the landlord. For its return to the Bay Area, Micro Center bided its time and came back at a time when many other retail chains were failing. It proves that the once proud region — the birthplace of electronics — still merits its own electronics store. You can buy dyes for liquid-cooled tubes at Micro Center. Sure, we have Target, Best Buy and Walmart selling lots of electronics gear. But there’s nothing like the Akihabara electronics district in Japan, which is full of multi-story electronics stores and gaming arcades. But this store is loaded with today’s modern top gear, like AI PCs, Ubiquity home networking gear, and dyes for multi-colored water-cooling systems. Vendors like Razer and Logitech had their own sections. Ackerman was pleased to show me the USB-C to USB-A adapter in stock, among many obscure items. And he showed me the inventory machine that could rotate its stock of 3D-printing filaments and give you the exact SKU that you scanned with a bar code. Tech hobbyists can find their love at Micro Center. “That’s super fun. I call it Mr. Filaments,” Ackerman said of the inventory robot. There’s a section for hobbyists who like single-board computing and DIY projects. There’s a set of video, audio and digital content creation tools for content creators. All told, there are more than 20,000 products and over 100 tech experts who can help. It even has the numbered cashier locations where you can check out — the same kind of checkout stands that Fry’s had. The Mr. Filaments robot inventory system at Micro Center. Customers can receive authorized computer service for brands like Apple, Dell, and HP, benefiting from same-day diagnostics and repairs, thanks to over 3,000 parts on hand through partnerships with leading OEMs. I only wish it had a help desk for Comcast. Micro Center has gear to entertain geeks. Micro Center started in 1979 in Columbus, Ohio. It’s a surprise there aren’t more nerd stores, given how ubiquitous tech is around the world these days. But Ackerman said, “These guys are really doing it right, picking and choosing, finding the right cities, finding the right locations. That’s why Charlotte is great. Miami is a big tech hub, especially for health tech. And we’re literally five minutes away from Apple headquarters and plenty of other places. People from HP and Nvidia and other companies are coming in today to hang out.” “Even though this store is big, the CEO (Richard Mershad) is really into curation, making sure it’s the right mix of stuff. He’s making sure it doesn’t go too far afield. So you’re not going to come in here and find, you know, hair dryers or lawncare equipment,” Ackerman said. “You’re going to find computer and home entertainment stuff, and DIY gear. There are components, just like in a Radio Shack, that hobbyists care about.” Dan Ackerman knows how to install a TV on your wall. As for the Micro Center News, Ackerman told me he has around 10 regular contributors and 20 more freelancers writing gadget reviews and other stories about tech gear. It is a kind of refuge for that vanishing breed of professional tech journalists. No wonder I was so nostalgic visiting Micro Center.

The Sony WH-1000XM6 headphones are easier to repair than the Sony WH-1000XM5, according to iFixit.

You are the data center Where hyperscale hardware goes to retire: Ars visits a very big ITAD site Watching memory DIMMs get sorted like Wonka children inside SK TES' facility. Kevin Purdy – May 26, 2025 7:30 am | 9 A worker at SK TES' Fredericksburg, Va. facility, processing incoming gear. Credit: SK TES A worker at SK TES' Fredericksburg, Va. facility, processing incoming gear. Credit: SK TES Story text Size Small Standard Large Width * Standard Wide Links Standard Orange * Subscribers only   Learn more "The biggest risk is data escape." Eric Ingebretsen, chief commercial officer at SK TES, an IT asset disposition provider, tells me this early on during a tour of a 128,000-square-foot facility in Fredericksburg, Virginia. He will restate this a few times. A big part of this site's pitch to its clients, including the "hyperscale" customers with gigantic data centers nearby, is that each device is labeled, tracked, and inventoried for its drives—both obvious and hidden—and is either securely wiped or destroyed. The process, commonly called ITAD, is used by larger businesses, especially when they upgrade fleets of servers or workers' devices. ITAD providers ensure all the old gear is wiped clean, then resold, repurposed, recycled, or destroyed. In keeping with the spirit of client confidentiality, I could not take photos or videos during my visit, record our talks, or capture anything beyond what I could scribble in my notepad. (The images in this post are provided by SK TES and were not taken during my visit). I did, however, see some intriguing things and learn about what happens to all the drives and rack-mounted gear we call "the cloud" once anything gets more than a few years old. Undocumented drives: The tiny terror The loading docks at SK's facility are essentially divided into two: one section for the hyperscalers and one for everything else. SK is discreet about its clients, but given its northern Virginia location, you can make some guesses about some of the online-selling, search-result-providing, software-providing firms this site is servicing. Pallets arrive in big, shrink-wrapped squares, as tall as my shoulders, with break-once security seals. Each device has its serial number assigned to an asset tag, one that will follow that unit through the whole facility. Laptops and desktops head to a retail station on a long roller line. At that spot, workers—the kind exceedingly familiar with all the BIOS startup keys—run an automated Blancco system to reset them at the firmware level. Workers sometimes have to dig deeper, like getting into a switch or router with SSH or undoing a RAID setup to enable programmed wiping. Inside the laptop/desktop examination bay at SK TES's Fredericksburg, Va. site. Credit: SK tes Inside the laptop/desktop examination bay at SK TES's Fredericksburg, Va. site. Credit: SK tes The details of each unit—CPU, memory, HDD size—are taken down and added to the asset tag, and the device is sent on to be physically examined. This step is important because "many a concealed drive finds its way into this line," Kent Green, manager of this site, told me. Inside the machines coming from big firms, there are sometimes little USB, SD, SATA, or M.2 drives hiding out. Some were make-do solutions installed by IT and not documented, and others were put there by employees tired of waiting for more storage. "Some managers have been pretty surprised when they learn what we found," Green said. With everything wiped and with some sense of what they're made of, each device gets a rating. It's a three-character system, like "A-3-6," based on function, cosmetic condition, and component value. Based on needs, trends, and other data, devices that are cleared for resale go to either wholesale, retail, component harvesting, or scrap. Full-body laptop skins Wiping down and prepping a laptop, potentially for a full-cover adhesive skin. Credit: SK TES Wiping down and prepping a laptop, potentially for a full-cover adhesive skin. Credit: SK TES If a device has retail value, it heads into a section of this giant facility where workers do further checks. Automated software plays sounds on the speakers, checks that every keyboard key is sending signals, and checks that laptop batteries are at 80 percent capacity or better. At the end of the line is my favorite discovery: full-body laptop skins. Some laptops—certain Lenovo, Dell, and HP models—are so ubiquitous in corporate fleets that it's worth buying an adhesive laminating sticker in their exact shape. They're an uncanny match for the matte black, silver, and slightly less silver finishes of the laptops, covering up any blemishes and scratches. Watching one of the workers apply this made me jealous of their ability to essentially reset a laptop's condition (so one could apply whole new layers of swag stickers, of course). Once rated, tested, and stickered, laptops go into a clever "cradle" box, get the UN 3481 "battery inside" sticker, and can be sold through retail. 5,632 HDDs at once Beyond these folks are some of the more than 5,000 HDD wiping bays (black, with all the wires running to them) at the SK TES facility. Credit: SK TES Beyond these folks are some of the more than 5,000 HDD wiping bays (black, with all the wires running to them) at the SK TES facility. Credit: SK TES That includes buyers of reconditioned hard drives, and boy, are there a lot of drives moving through this site. Once a drive is verified through its SMART data to be worth grading and refurbishing, it's put into one of more than two dozen wiping bays, each holding about 192 drives (with a special bay handling some M.2 and other non-HDD sizes). If the bays were completely full, 5,632 drives could be wiped concurrently. The month before I visited, the site had processed about 58,000 drives, according to Ingebretsen. There are also stacks and stacks of memory and CPUs in this non-retail corner of the site. I walked by one box labeled "SR1Y5" (i.e., Intel Xeon E5-2676 v3 chips), and he confirmed there were 3,600 units inside. The RoboFlex II. This baby weighs 35 pounds, has Good and Bad bins, and whips sticks around at remarkable speed. Credit: SimmTester The RoboFlex II. This baby weighs 35 pounds, has Good and Bad bins, and whips sticks around at remarkable speed. Credit: SimmTester Nearby, in the memory-testing section, I find the memory machine that will stick in my own memory the rest of my life: the RoboFlex-II Handler. You drop RAM DIMMs or SODIMMs into one of its two bays, and it tests the pins on each stick. Each stick is rated "Good" or "Bad" and kicked in the appropriate direction by a 90-PSI air blast. I asked the workers at this station if they think about the entirely relevant scene from Willy Wonka & the Chocolate Factory. They do, and quite often. Where does all this stuff go? SK TES sells retail devices like laptops, desktops, and mobile devices through its "Stock Must Go" brand on eBay and elsewhere. Chips and memory are typically bought up by laboratories, crypto miners, data centers, and a lot of high-volume overseas customers. There are steady enterprise customers for the drives, usually putting them back into datacenters. It's something like $2.5 million in sales each month, an SK TES representative told me. Big data, and only getting bigger The other business—the thing that makes ITAD "disposition" instead of just "refurbishing"—is dismantling and handing off devices for shredding. The Financial Times has reported that Amazon and Microsoft have 100 percent data shredding policies, with Google also shredding much of its drive turnover. The US National Renewable Energy Laboratory estimated in 2022 that by 2025, roughly 50 million end-of-life data center drives would be shredded every year. ITAD businesses like SK TES make the pitch that companies can create revenue to reinvest in operations through offering gear for refurbishment. SK TES representatives told me that most of the Virginia site's customers are "focused on reuse," while "a small portion" of equipment is shredded and sent off-site to be recycled. The site, built on the guts of a mattress factory, was put up specifically to handle the high volumes of server racks and HDDs coming in from data centers. It has a staff of 165, though it fluctuates a bit between big server hauls and downtime. The full-fledged site had been open one year when I visited. The biggest challenge, Ingebretsen told me, was getting power everywhere it needed to go inside the facility as volume fluctuated and needs expanded. Data centers are massive and growing, to the point of creating entire sub-industries that employ dozens of people to handle their tech turnover. The Northern Virginia Technology Council industry group puts this region's data center growth at 500 percent between 2015 and 2023, and it continues, though some pushback is happening. Many data centers were accessed to allow me to navigate to SK TES's site via Apple Maps and write this post, and for you to read it. It reminds me of the adage—made popular by the CEO of GPS maker TomTom—that you are not stuck in traffic, you are the traffic. After my tour, I got my phone back from security, talked a bit with Ingebretsen, then headed out to my car. I spent a few minutes jotting down the most notable things I'd seen inside, then looked up and out the windshield. There was a black tarp wrapped around a chain-link fence of the lot next door, with logos announcing the construction of a new data center. Data centers are everywhere—and nowhere in particular. Kevin Purdy Senior Technology Reporter Kevin Purdy Senior Technology Reporter Kevin is a senior technology reporter at Ars Technica, covering open-source software, PC gaming, home automation, repairability, e-bikes, and tech history. He has previously worked at Lifehacker, Wirecutter, iFixit, and Carbon Switch. 9 Comments

Save the date Mozilla is killing its Pocket and Fakespot services to focus on Firefox Browser maker shifts resources to "new Firefox features that people need most." Kevin Purdy – May 22, 2025 2:58 pm | 63 Credit: Mozilla/Pocket Credit: Mozilla/Pocket Story text Size Small Standard Large Width * Standard Wide Links Standard Orange * Subscribers only   Learn more When web services shut down and have time to put up a blog post about it, there's typically some real understatement in their explanation of "why." Bookmarking service Pocket's goodbye post truly delivers on this front, noting almost off-handedly that "the way people use the web has evolved." Yes, you might just say that. Both Pocket and another browser add-on, Fakespot, are being shut down by Firefox maker Mozilla in early July. In a post about the closures, Mozilla cites the need to "invest our time and resources so we can make the biggest impact." Pocket's saving and curation powers will be implemented into Firefox, while Fakespot's analysis of online shopping reviews "didn't fit a model we could sustain." Pocket started in 2007 as Read It Later, a way to bookmark web articles for later reading. It's not just the focus on published text articles that now seems quaint but also the idea that there was a finite amount of web material you would get back to and would have the time to do so. Those who do want that nice-sounding media experience can cobble it together in most modern browsers, which have built-in tools for managing bookmarks, distinct "reading lists," and even creating stripped-down "readable" versions of articles. Pocket did more than this and leaned into longform journalism and literary writing. The site's "Best of 2020" won a Webby award, and it regularly curated collections on a range of topics. Pocket is already used to curate recommendations on Firefox's new tab page (if you choose that version of it) and will likely see some features filter into the wider app. Fakespot, acquired by Mozilla in mid-2023, was described by Mozilla then as fitting its "work around ethical AI and responsible advertising." Mozilla has less to say about Fakespot's potentially altered future. "We’re grateful to the communities that made Pocket and Fakespot meaningful," Mozilla's post reads. "As we wind them down, we’re looking ahead to focusing on new Firefox features that people need most. This shift allows us to shape the next era of the internet—with tools like vertical tabs, smart search and more AI-powered features on the way." Pocket users can use the service until July 8. After that, the service will be in "export-only mode," with exports of bookmarks and metadata available until October 8, 2025. Premium monthly subscriptions will be canceled immediately, and annual subscribers will get prorated refunds dated to July 8. The mobile apps are no longer available for new installs but can be kept until October 8. Fakespot's extensions for other browsers will stop working on July 1. Its Firefox implementation, Review Checker, will shut down June 10. Kevin Purdy Senior Technology Reporter Kevin Purdy Senior Technology Reporter Kevin is a senior technology reporter at Ars Technica, covering open-source software, PC gaming, home automation, repairability, e-bikes, and tech history. He has previously worked at Lifehacker, Wirecutter, iFixit, and Carbon Switch. 63 Comments

Harvest, pack, ride Gouach wants you to insert and pluck the cells from its Infinite e-bike battery Tiny French firm wants to keep a few bad cells from spoiling a lot of e-bikes. Kevin Purdy – May 22, 2025 4:12 pm | 11 Credit: Gouach Credit: Gouach Story text Size Small Standard Large Width * Standard Wide Links Standard Orange * Subscribers only   Learn more E-bike batteries are, for the most part, a collection of 18650 batteries, packaged together and welded in series and parallel, attached to a battery management system (BMS). A "dead" e-bike battery may only have two or three truly dead cells inside, while the remainder work fine. This is useful knowledge that, for the most part, very few e-bike owners can really use. Arc welders are not a common tool to own, and most e-bike batteries are not designed to be opened, safely or otherwise. French firm Gouach, essentially a three-person company, is pitching its Infinite Battery as the opposite of this status quo. It's a durable, fireproof casing into which you can place and replace 18650 batteries using only a screwdriver. It keeps you updated on the status of cell performance and heat through a Bluetooth-connected app. And it's designed for compatibility with "90% of existing e-bike brands," or you can upgrade an existing "acoustic" model. Circuit boards, bent to riders’ will Alexandre Vallette, CEO of Gouach, told Ars that developing a system for no-weld battery wiring involved "a lot of trial and error" over four years. A typical "spring" contact for an 18650—the kind used by most devices that take AA or AAA batteries—doesn't work, because bike rides can knock them loose with vibration. What emerged were custom-printed circuit boards (PCBs), with just-flexible-enough contacts cut into the board to carry the current from each battery to the BMS, allowing for thermal monitoring across numerous points on the package. The Infinite Battery's case, too, was born of hard-won experimentation. Gouach provided early versions of its refillable batteries early on for a European bike-share company, using an off-the-shelf "shark"-style casing. Like anyone who lives in a city with dockless bike-sharing, they discovered the variety of places and angles at which people will leave a shared bike. Water ingress killed a number of bike batteries. "It was really a setback for the company [Gouach] at the time," Vallette said. "But we knew that the technology itself was good, so we designed our own casing." Gouach's casing is now rated IP67, Vallette said, and meets UL 2271 standards. Gouach's video demonstrating its battery case's fire resistance. Unexpected resistance There are three avenues for selling the Infinite Battery, as Vallette sees it. One is working with e-bike makers to incorporate Gouach's tech. Another is targeting e-bike owners and small bike shops who, this far into e-bikes' history, might be dealing with dead batteries. And then there are folks looking to build their own e-bikes. The Infinite Battery will be made available in 36 V and 48 V builds, and Gouach's app promises to help owners connect it to a wide variety of bikes. Actually fitting the battery case onto your bike is a different matter. Some bikes can accommodate the Gouach kit where their current battery sits, while others may end up mounting to a rack, or through creative, but hopefully secure, frame attachments. One of the biggest compatibility challenges, Vallette said, was finding a way to work with Bosch's mid-drive motors. The communications between a Bosch motor and battery are encrypted; after "a serious effort," Gouach's app and battery should work with them, Vallette said. Gouach, having raised more than $220,000 on crowdfunding platform Indiegogo from about 500 backers, and $3.5 million in venture funding, is getting close to offering the batteries through its own storefront. Gouach's roadmap puts them in mass production at the moment, with assorted bugs, certifications, and other matters to clear. EU-based backers should get their kits in June, with the US, and an open online store, to follow, barring whatever happens next in international trade. Vallette said in mid-May that the US's momentary 145 percent tariffs on Chinese imports disrupted their plans, but work was underway. If nothing else, Gouach's DIY kit shows that a different way of thinking about e-bike batteries—as assemblages, not huge all-in-one consumables—is possible. Kevin Purdy Senior Technology Reporter Kevin Purdy Senior Technology Reporter Kevin is a senior technology reporter at Ars Technica, covering open-source software, PC gaming, home automation, repairability, e-bikes, and tech history. He has previously worked at Lifehacker, Wirecutter, iFixit, and Carbon Switch. 11 Comments

A successful game of fetch I helped a lost dog’s AirTag ping its owner: An ode to replaceable batteries The most repair-friendly device Apple makes needs to stick with coin batteries. Kevin Purdy – May 21, 2025 5:31 pm | 24 This is Serene, a 7-year-old pitbull mix available for adoption at the Humane Rescue Alliance in Washington, DC. Credit: Humane Rescue Alliance This is Serene, a 7-year-old pitbull mix available for adoption at the Humane Rescue Alliance in Washington, DC. Credit: Humane Rescue Alliance Story text Size Small Standard Large Width * Standard Wide Links Standard Orange * Subscribers only   Learn more Out of all the books I read for my formal education, one bit, from one slim paperback, has lodged the deepest into my brain. William Blundell's The Art and Craft of Feature Writing offers a "selective list of what readers like." It starts with a definitive No. 1: "Dogs, followed by other cute animals and well-behaved small children." People, Blundell writes, are your second-best option, providing they are doing or saying something interesting. I have failed to provide Ars Technica readers with a dog story during nearly three years here. Today, I intend to fix that. This is a story about a dog, but also a rare optimistic take on a ubiquitous "smart" product, one that helped out a very good girl. Note: The images in this post are not of the aforementioned dog, so as to protect their owner's privacy. The Humane Rescue Alliance of Washington, DC, provided photos of adoptable dogs with some resemblance to that dog. Hello, stranger My wife and I were sitting with our dog on our front porch on a recent weekend morning. We were drinking coffee, reading, and enjoying DC's tiny window for temperate spring weather. I went inside for a moment; when I came back, my dog was inside, but my wife was not. Confused, I cracked open the door to look out. A dog, not my own, stuck its nose into the door gap, eager to sniff me out. "There's a dog here?" my wife said, partly to herself. "She just ran up on the porch. I have no idea where she came from." Rexi, a nearly 3-year-old mixed breed, is being fostered and ready for adoption at the Humane Rescue Alliance. The author's wife thinks Rexi looks the most like their unexpected dog visitor. Credit: Humane Rescue Alliance Rexi, a nearly 3-year-old mixed breed, is being fostered and ready for adoption at the Humane Rescue Alliance. The author's wife thinks Rexi looks the most like their unexpected dog visitor. Credit: Humane Rescue Alliance I secured my dog inside, then headed out to meet this fast-moving but friendly interloper. She had a collar, but no leash, and looked well-groomed, healthy, and lightly frantic. The collar had a silicone band on it, holding one of Apple's AirTags underneath. I pulled out the AirTag, tapped it against my phone, and nothing happened. While my wife posted on our neighborhood's various social outlets (Facebook, Nextdoor, and a WhatsApp group for immediate neighbors), I went into the garage and grabbed a CR2032 battery. That's not something everyone has, but I have a few AirTags, along with a bit of a home automation habit. After some pressing, twisting, and replacing, the AirTag beeped and returned to service. I tapped the AirTag against my phone, this time receiving a link to a webpage with the tag's serial number and the last four digits of its owner's phone number. I had not yet needed to actually find something truly lost with an AirTag, so I looked up how it worked. Once you set an AirTag in your Apple account to "Lost" status, you can then choose to have a full phone number and message appear to anybody who taps it with their device (iOS or Android). If you don't know that your AirTag or Find-My-compatible item is missing and mark it that way, you can't preemptively have it offer up details. Maybe Apple should change that, for certain kinds of tracking. Noma, a 1-year-old pit bull mix, at the Humane Rescue Alliance. Credit: Humane Rescue Alliance Noma, a 1-year-old pit bull mix, at the Humane Rescue Alliance. Credit: Humane Rescue Alliance I had to leave the house, leaving my wife to negotiate space and sight lines between our concerned, confused dog and this excited newcomer. The local animal control encouraged my wife to monitor social channels before dropping the dog off at their facility. After two hours of unexpected fostering, we were anxiously texting one another. We were glad to have gotten this dog off the street and into a home with leashes and a crate available, but we had to make a decision before the animal shelter closed for the day. Then the doorbell rang. The dog's owner, led by the AirTag, asked if we had her dog. She explained how the dog got loose and pledged to keep a fresh battery in there from now on. My wife said goodbye to her temporary charge, and I came home to find both her and my dog far more relaxed. Maybe the dog's owner would have seen postings on Facebook or Nextdoor, though I cannot blame anybody who doesn't want those networks in their life. Perhaps a neighborhood phone chain would have come through, or the shelter could have connected us. But Apple's coin battery-powered nub came through in the nick of time, and I'm grateful. That’s a good AirTag—now, stay Cresha, a 3-year-old mixed-breed dog, is available for adoption. Credit: Humane Rescue Alliance Cresha, a 3-year-old mixed-breed dog, is available for adoption. Credit: Humane Rescue Alliance I was working at iFixit when rumors circulated about Apple developing a "Tile-like" item tracker in early 2019. The teardown and communications teams at iFixit were largely expecting Apple to release another tiny product that was impossible to fix or have its batteries swapped, filling the gaps in landfills alongside AirPods. Tile, one of the first in the Bluetooth tracking market, had introduced replaceable batteries a few months prior. But Apple, at that point still defending its butterfly MacBook keyboards and holding tight to Lightning ports, seemed unlikely to go the way of the common denominator. But Apple chose wisely. After addressing some of the early concerns about their potential misuses (though others remain), AirTags have become very handy devices. Some dog owners go for GPS tracker collars, which might fare better in rural areas. But it's a good bet that somebody with an iPhone will get close enough to your dog—or wallet, or keys—to update its location. Even if they don't have an iPhone to provide a location ping, they can get some information on who owns this tag. Apple is seemingly gearing up to offer a new AirTag, one with purportedly greater range and fewer avenues for privacy-invading misuse. I humbly request that the new model continue to be powered by a coin cell battery. When something important goes missing—especially something that likes ear scritches and pumpkin treats—it is best not to have to find a charging cable or magnetic charging pad, or discover the cells inside are dead. Coin cells are not perfectly recyclable, because nothing really is, but they're generally much easier to handle than lithium-ion waste. I have AirTags on my family's bikes, keys, wallets, and a couple other things. Depending on what the next AirTag looks like, I'm keen to get one on my dog's collar, too. Take the battery warnings seriously, and they can help some wayward good boys and girls. And I hope they made this human, telling a story about coin batteries, momentarily interesting. Kevin Purdy Senior Technology Reporter Kevin Purdy Senior Technology Reporter Kevin is a senior technology reporter at Ars Technica, covering open-source software, PC gaming, home automation, repairability, e-bikes, and tech history. He has previously worked at Lifehacker, Wirecutter, iFixit, and Carbon Switch. 24 Comments