Fresh off a $6.6 billion share sale that cemented its $500 billion valuation, OpenAI is viral with Sora 2, its first feed-driven video app.

Animatronic, performer in open and closed mask, posable doll, CG, face replacements (and all of the above).In director Gerard Johnstones M3GAN 2.0, from Blumhouse Productions and Atomic Monster, the rampageous titular robot is resurrected to defeat a new military-grade robot called AMELIA. Like the first film, a number of different techniques were utilized to bring M3GAN to life, ranging from an animatronic, to the main performer with an open and closed face, a posable doll, stunt performance, and then all manner of face replacements and CG character effects (often combined in one shot).In this new installment, the stakes are raised and M3GAN appears in many shapes and formsfrom a Johnny 5-like abomination to a sleek robotic underbody, a wingsuit and even an outrageous Cyberpunk outfit destined to become a halloween favorite.Here at befores & afters, we take a look at the different filming techniques and the different M3GANs with Fin Design + Effects visual effects supervisor Rick van de Schootbrugge. Fin was responsible for around 800 visual effects in the film, including approximately 350 full-CG shots. Visual effects studio Fathom also partnered with Fin on the film to complete a range of VFX, especially for the car chase sequence.van de Schootbrugge recently shared all these details with the author in a Sydney SIGGRAPH Chapter live session.The different ways M3GAN was capturedCentral to the creation of the character was an animatronic M3GAN built by Morot FX Studio, led by make-up effects designer Adrien Morot, that could be remote controlled and puppeteered on set. The animatronic was basically a very advanced robot, advises van de Schootbrugge. Shooting as much as possible with the animatronic was always our preference because she is what M3GAN is built around as far as her looks and her robotic characteristics are concerned.Of course, the animatronic brought with it several built-in shooting limitations, in that it could not be relied upon for shots of M3GAN walking, running or doing big movements. Certainly, notes van de Schootbrugge, that was a key part of robot character. Shes quite mute in her expressions. Its all, in a sense, very Terminator-y. Its a lot of little eye movements, sassy looks, but not a lot of big reactions.Then, for bigger movements, actress Amie Donald reprised her role as M3GAN in a variety of ways. She was able to wear a M3GAN outfit, a wig and a mask. In fact, there were two types of face masks used. One was a closed mask with a M3GAN face that closely resembled the animatronic. The other was an open-faced mask. This massively increased the time that Amie could wear the mask, states van de Schootbrugge, which is a big deal on a film set, where time is always short. Plus, shes also a child actress, we get a limited amount of time with her.Fin would then augment the performance of Donald using a combination of face replacements and completely CG take-overs. In the case of the closed face mask, that provided the visual effects with more real estate to blend their CG and the live-action. For the open-faced mask, a fuller digital face replacement was necessary. Stunt performers similarly wore both types of masks and would go through the same treatment from Fin, which then also had to deal with different body proportions and heights.On set, van de Schootbrugge took advantage of capturing traditional lighting references, such as gray balls and HDRIs, but in addition also made use of practical M3GAN heads. From our experience on the first film we were looking for ways to get more accurate lighting information back to our studio in Sydney. Ideally after each take with Amie we would roll in the animatronic. That would give you the best 1-on-1, apples to apples comparison of what M3GAN is supposed to look like in that shot. Unfortunately, it became very clear that keeping the animatronic on stand-by was not an option. Not only would it be too slow to roll the animatronic in and out of frame every time, she was simply too busy being programmed and too precious an asset to get access to.Fortunately, says van de Schootbrugge, MOROT did create these poseable heads of M3GAN, same proportions, same silicone, that we could use besides our mirrored ball. Every time we had a shot with Amie, a stunt double, or where we knew we had to do a face replacement or digi-double, we would pick the right head and repeat M3GANs motion and got very accurate data that would save us many hours of work in post.Further capture methods included photogrammetry and LiDAR scanning of the animatronic, Amie and stunt double in different configurations and costume set-ups. In the film we get pretty close to the CG versions of our characters, so we had to capture every little pore and other details, explains van de Schootbrugge. M3GANs skin is made out of silicone, so that comes with all sorts of interesting properties. Theres some stickiness and flakiness to the silicone. It also scatters the light in a particular way. From a distance, it looks quite smooth, but then you get closer and closer, and you see it picks up all these little pieces of dirt and lint. It was quite important for us to try and capture as much of those imperfections as well, because otherwise, youre very quickly getting into a realm of things looking too smooth and too perfect.In some ways, however, Fin did lean into that particular look for their CG robot and for face replacements. She is a doll and by design, points out van de Schootbrugge, has an uncanny, unnatural, slightly plasticky look to her. It was a constant push and pull to have her look not quite human, but also not CG or fake and to push it too far into the other direction where you lose connection with reality.To help match the robot look for M3GAN, which originated with the animatronic, van de Schootbrugge had the puppeteers run the puppet through all its motor functions. We would look at, how far can her mouth open, or what does it look like when she says, O, or B. Wed run through a whole bunch of words, and through blinking. How far does the eye actually close when she blinks? That was about capturing information that was valuable later on.Making M3GAN danceFin then went through the process of building a M3GAN asset that could be tailored for all the different looks the character went through in the film. One was a cyberpunk look that is most prominent in a robot dance sequence at an AI/tech conference.The backstory here, recounts van de Schootbrugge, is that the first film went viral because of one of the dances in there. So, naturally, you could imagine that she would do another great dance in this film. And, M3GAN being a robot, well, they thought it would be quite fun if she did a robot dance at the AI convention.Amie Donald had rehearsed a dance to perform during principal photography, but when it was decided to lean even more into the robotic nature of the dance, the whole scene was re-thought with a professional robotic pop-and-lock dancer. This dancer, known as Barbin.ili, was then motion captured performing the new dance.Fin then ultimately rebuilt the entire sequence, dealing with reshoots shot against bluescreen, splicing in the new motion capture and animating their M3GAN asset to match. Says van de Schootbrugge: We were able to then translate Barbins mocap performance onto our 3D asset. We stayed pretty true to the mocap, but we would cut different portions of her dancing together and made some adjustments with the final framing in mind. We then also had to marry it back into shots that were filmed six months earlier where we had Amie standing on stage.Making M3GAN flyAt one point, M3GAN dons a tactical wingsuit in order to infiltrate a hidden facility where AMELIA, her rival android, is being housed and weaponized. Live-action moments and reference photography of the jump were largely captured against greenscreen, with the animatronic, Amie or a stunt performer wearing the wingsuit costume. Fin would then composite those plates into backgrounds, or utilize its CG wingsuit M3GAN.For the environments that M3GAN passes above and through, Fin leveraged Unreal Engine. Its a heavy CG sequence, details van de Schootbrugge. With just a fraction of a blockbuster budget we needed to come up with how to do this economically. If you budgeted this like a big movie, its not something that would fit in.Early on, we discussed shooting background plates by getting drone photography, but it quite quickly became apparent that that wasnt going to hold up. There was too much dynamicness to it that couldnt really be captured with a drone and get it to match the plates of M3GAN. For this scene we had done some work in Unreal Engine for our previs. The quality of Unreal has been going up every year significantly, so we actually thought that Unreal might be a really good candidate to create this type of environment that we were after.The environment included mountainous tree-covered areas. In Unreal, it was something Fin knew they could achieve with just a small team of people, and therefore within budget. Unreal has a lot of procedural tools in there and assets that we could use already. We built that environment with just two artists, shares van de Schootbrugge.The final fightEventually, M3GAN and AMELIA, played by Ivanna Sakhno, confront each other. Once again, all the tricks in the book were utilized for shooting the fight, and then used by Fin to replicate both M3GAN and AMELIA.There are stunt rig removals, set extensions, face replacements, digital doublesthe works! describes van de Schootbrugge. Were fully building AMELIA, and also M3GAN from top to bottom. I mean, for this scene M3GAN has a new groom, a damaged face, and then halfway throughout the scene, she gets her face zapped, so there was another version of M3GAN that we had to create. On top of that, we added electricity, we added sparks, glowing eyes, lots of wire removal, set extensions. To top it off we also re-created the Motherboard, a prop which caries an important story point, that the director wanted to make more impressive.For this fight, in particular, van de Schootbrugge admits he was nervous during the shoot about the wigs on the M3GAN and AMELIA characters. We were running out of shooting days. Things were happening fast and loose. There were a lot of strands and loose hairs. I was like, Oh my God, this is going to be a nightmare to comp all these faces in. But you know what? The things that youre worried about at the start are often not the ones that you actually have to worry about in post, and this was 100% one of those. It actually went really smoothly.The post Heres the many different ways the title character of M3GAN 2.0 was made, both practically and digitally appeared first on befores & afters.

Taxpayers in the Empire State will soon receive a refund to help offset rising living costs.Part of the 2025-2026 New York State budget allocates funds for inflation refund checks. The onetime payments offer relief to New Yorkers who have incurred increased sales tax costs due to inflation. According to the state, 8.2 million households will receive payments.Governor Kathy Hochul announced that as of September 26, inflation refund checks have started to be mailed to taxpayers. Checks will continue to be issued throughout October and November.Heres what to know about whether youre eligible, how much youll receive, and more.Am I eligible for an inflation refund check?Yes, if for tax year 2023 you:Filed Form IT-201, New York State Resident Income Tax ReturnReported income within the qualifying thresholdsWere not claimed as a dependent on another taxpayers returnTheres no need to apply to receive a refund check. Checks will be mailed out automatically to those who meet the above eligibility requirements.What are the income thresholds, and how much will I receive?Check amounts are being issued in the range of $150 to $400; amounts vary by tax filing status for the 2023 tax year and your 2023 New York Adjusted Gross Income (AGI), found on Form IT-201, line 33.For single filers:2023 AGI of $75,000 or less:Refund amount of $2002023 AGI of more than $75,000, but not more than $150,000:Refund amount of $150For married joint filers:2023 AGI of $150,000 or less:Refund amount of $4002023 AGI of more than $150,000, but not more than $300,000:Refund amount of $300For married separate filers:2023 AGI of $75,000 or less:Refund amount of $2002023 AGI of more than $75,000, but not more than $150,000:Refund amount of $150For head of household filers:2023 AGI of $75,000 or less:Refund amount of $2002023 AGI of more than $75,000, but not more than $150,000:Refund amount of $150For qualifying surviving spouse filers:2023 AGI of $150,000 or less:Refund amount of $4002023 AGI of more than $150,000, but not more than $300,000:Refund amount of $300How can I make sure I receive my check?Due to the high volume of checks being processed, it may take time to receive your refund. If youre eligible, your check will be mailed to the address associated with your most recently filed tax return.If youve moved since filing your 2024 return, or you havent yet filed a return for tax year 2024, you can update your address with the New York Department of Taxation and Finance through your Individual Online Services Account. (If you dont have an Individual Online Services Account, you can create one.)Watch out for scamsIf someone contacts you about your refund check, its likely a scam. Hochul cautioned New Yorkers to be alert to scammers who are sending voice messages, text messages, emails, and direct mail to taxpayers in an attempt to defraud them.New Yorkers do not have to do anything to receive an inflation refund check outside of meeting the eligibility requirements, Hochul said in a news release.With scams targeting the states inflation refund initiative, let me be clear, she continued. The Tax Department and the IRS do not call or text individuals for personal information. My administration urges New Yorkers to remain vigilant and report these scams to the Tax Department to protect yourself from being a victim.Scams can be reported to the New York State Department of Taxation and Finance.

In the mid-2000s, Joachim Fiedler was a professional cellist in Germany. A tinkerer by nature, he found himself frustrated by the bow holders inside the lid of a cello case: They were fiddly and required two hands to open, whereas Fiedler wanted to do it one-handed. He thus prototyped and refined a magnetic bow holder. Pressing against a latch released the bow. Despite having played with the Berlin Philharmonic and having toured the world with different orchestras, Fiedler became obsessed with magnetic connections rather than music. In 2007, he hung up the bow and started Fidlock, a company that makes magnetic buckles for bags, helmets, tents, clothes and more.For some examples of the actions, this SNAP pops open at the pull of a strap:This 3-point JUNIOR is for baby carriages:This magnetic ratcheting WINCH is for bags and outdoor gear:This COINTRAP is for bike helmets, and is designed to be easy to use in cold weather, when one is wearing gloves:You can see more of Fidlock's offerings here.

Titaners No.1/1000 fractal vise doesnt just grip objects; it transforms the very act of clamping into something that feels almost ceremonial. This isnt hyperbole talking, its the inevitable result when aerospace-grade GR5 titanium meets two decades of specialized craftsmanship, creating something that makes you question whether youre looking at a precision instrument or a kinetic sculpture that happens to clamp things.Most people encounter vises as crude, utilitarian chunks of cast iron bolted to workbenches, designed to squeeze and hold without much thought to elegance or finesse. The Titaner No.1/1000 obliterates that expectation entirely. Machined from a single block of titanium and limited to exactly 1,000 numbered pieces worldwide, this instrument represents what happens when engineering perfectionism collides with genuine artistic vision.Designer: TitanerClick Here to Buy Now: $1099 $2461 (55% off). Hurry, only a few left! Raised over $162,000.What separates true innovation from mere iteration is the willingness to question foundational assumptions about what an object should be. Titaner does exactly this by asking, What if a vise wasnt just a vise? The result is a limited-edition precision instrument that challenges our very categorization of tools, art objects, and mechanical sculptures. Their marketing boldly states, Forget what you know. This is not a vise, and after examining its capabilities and construction, that claim feels less like hyperbole and more like an accurate redefinition.The 100mm travel range allows for versatile clamping capacity, while the four-layer, three-set stepped jaw system creates a fractal pattern that adapts to irregularly shaped objects with remarkable conformity. Unlike traditional vises that apply uneven pressure, potentially damaging delicate materials, the Titaners jaws distribute force with mathematical precision. This matters tremendously when working with expensive materials or intricate components where even slight marring isnt acceptable. Imagine clamping a handcrafted watch component, a custom guitar bridge, or a precisely machined firearm part, where uniformity of pressure can mean the difference between perfection and failure.The patented torque adjustment system represents another quantum leap forward. Traditional vises offer crude pressure control at best, typically through feel alone. The Titaner system allows for calibrated force application, giving users unprecedented control over exactly how much pressure is applied to the workpiece. For jewelers working with soft metals like 24k gold (Mohs hardness of 2.5-3), this precision prevents deformation while still securing the piece. Similarly, model makers working with delicate materials like balsa wood (with compressive strength of just 1.1 MPa parallel to grain) can work confidently knowing their medium wont be crushed.Titanium as a material choice itself lends some solid street cred to this device. With a density of 4.5 g/cm (compared to steels 7.75-8.05 g/cm), the vise maintains incredible strength while weighing 45% less than a steel equivalent. This material choice isnt merely practical; its symbolic of Titaners philosophy. Titanium represents human ingenuity, having only been isolated as an element in 1910 and not commercially refined until the 1950s. Despite its relative newness, its 880C melting point, 0.17 W/mK thermal conductivity, and exceptional corrosion resistance make it almost supernatural in its capabilities. The fact that each vise begins as a solid block of this remarkable metal, precision-milled into complex geometries with tolerances measured in micrometers, speaks volumes about both the engineering ambition and the artistic vision driving the product.The vise functions in multiple orientations, vertical, horizontal, or even inside-out, allowing it to grip items from the inside rather than just externally. This versatility multiplies its utility for specialized tasks like holding hollow cylinders from the inside for engraving work, or securing irregularly shaped objects that traditional vises simply cannot accommodate. A watchmaker could secure a delicate case while working on movement installation, a gunsmith could hold a receiver without marring finished surfaces, or a jewelry designer could secure complex three-dimensional forms that would otherwise require custom fixtures.Users report that the tactile experience of operating the Titaner transcends typical tool interactions. The smooth rotation of the brass adjustment handle (a deliberate material contrast to the titanium body), the precise click of the torque mechanism, and the perfectly balanced weight create what one reviewer called mechanical ASMR. This sensory aspect shouldnt be underestimated; tools that provide positive feedback loops encourage better craftsmanship simply by making precision work more intuitive and satisfying.Real-world applications for this vise span an impressive range. Electronics repair technicians working on modern smartphones need something that can secure tiny components without crushing them. Jewelry makers require precise grip on oddly-shaped pieces during intricate soldering or stone-setting work. Model makers building detailed scale aircraft or architectural miniatures need a vise that can handle delicate assemblies without leaving marks. Even vintage watch restoration, where components might be irreplaceable and worth thousands, benefits from the controlled pressure and adaptive jaw geometry.The limiting of production to 1,000 individually numbered units worldwide creates an interesting tension between the vises functionality and its collectibility. Some buyers will use their Titaner daily, accumulating a patina of work that tells the story of creation. Others will preserve it as an investment piece, recognizing that the intersection of limited availability, exceptional materials, and innovative design typically appreciates in value over time. Most fascinating will be those who manage to inhabit both spaces, using their vise while maintaining its condition, much like collectors of fine watches who wear their timepieces rather than simply vault them.Titaners heritage explains how they achieved this level of refinement. The company has spent 20 years pushing titanium into applications where other manufacturers stick with steel or aluminum. They created the worlds first titanium flashlight in 2005, followed by breakthrough titanium fountain pens, carabiners, rulers, and even toothpicks. Each product taught them something new about working with this notoriously difficult material. Titanium machines differently than other metals, requiring specialized tools, techniques, and an almost intimate understanding of how the material behaves under different conditions.For many workshop tools, perfection means invisibility, simply performing their function without calling attention to themselves. The Titaner fractal vise inverts this relationship, demanding appreciation both when static and in use, without sacrificing a molecule of functionality. It reminds us that humans create tools not merely to accomplish tasks but to express our highest understanding of materials, mechanics, and beauty. In a world increasingly dominated by disposable objects, the Titaner No.1/1000 makes a compelling case for investing in objects that can last generations while elevating daily work from mere productivity into something approaching ritual.The ritualistic approach extends to the products packaging. Each fractal vise comes in an aerospace aluminum vault, almost like something youd use to transport precious exhibits to museums. Inside, the vises parts are neatly laid out on a bed of EVA foam, allowing you to put the entire structure together like a watchmaker builds a mechanical timepiece. The Titaner No.1/1000 comes in 2 variants, a basic (which starts at $1099), and a slightly more detailed single model (priced at $1779) with a different lower clamping structure. The Titaner No.1/1000 ships globally, but given its limited-edition production run, you might want to order yours while its still up for grabs.Click Here to Buy Now: $1099 $2461 (55% off). Hurry, only a few left! Raised over $162,000.The post This Limited-Edition Titanium Fractal Vise Is a Functional Masterpiece That Actually Works first appeared on Yanko Design.

When it comes to storage, shelving is one of the most underrated design elements in a home. Done right, its not just functional,it can elevate an entire room, bringing in a sense of luxury while staying flexible enough to adapt to your changing needs. Whether youre styling a living room, bathroom, or even a garage, the right shelving can blend elegance with everyday practicality. Below are 20 ideas across different room types that strike that balance of luxe yet versatile.1. Minimalist Open Shelving in the KitchenImage Source: PinterestOpen shelving in kitchens has been a huge trend, and when styled well, it delivers a luxurious yet approachable vibe. Instead of bulky upper cabinets, slim wood or stone shelves keep the space feeling light and airy. Theyre perfect for displaying beautiful everyday items,think ceramic bowls, glass jars, or brass pepper mills,that double as dcor. The key to keeping open shelves luxe instead of cluttered is restraint: curate items that you use often but that also look attractive.2. Built-In Alcove ShelvingImage Source: PinterestFor rooms with niches or alcoves, custom built-in shelving feels timeless and indulgent. Think about those recessed walls in a living room or beside a fireplace, theyre perfect spots to tuck in shelving that looks intentional. By painting the shelves the same color as the wall, you keep the design cohesive, but you can also opt for a contrasting wood or lacquer finish for drama. This type of shelving is incredibly adaptable, it can house a TV, books, art, or even barware if you add mirrored panels to the back.3. Industrial Pipe Shelving for Home OfficesImage Source: PinterestHome offices need hardworking storage, but that doesnt mean they cant look chic. Industrial pipe shelving,wood planks supported by matte black or brushed brass pipes,offers a luxe-meets-functional aesthetic. The exposed structure feels modern and stylish, while the wood keeps things warm and versatile. These shelves can hold books, files, and plants, but they also double as a backdrop for video calls, adding instant design cred. The modular nature of pipe shelving makes it easy to reconfigure if your office needs change.4. Marble Slab Shelving in the BathroomImage Source: PinterestBathrooms might not be the first place you think of for luxury shelving, but marble shelves can instantly elevate the space. Whether installed above a vanity or tucked into a shower niche, a marble slab shelf feels like a spa-worthy upgrade. Because marble comes in endless veining patterns, its easy to adapt the look to your style: crisp white Carrara for classic elegance, or deep green marble for drama. These shelves can hold rolled towels, bath salts, or candles, doubling as both functional storage and indulgent display.5. Over-the-Bed ShelvingImage Source: PinterestIn bedrooms, over-the-bed shelving creates both drama and utility. A built-in unit that frames the bed instantly feels luxe, almost like a boutique hotel suite. The shelves above can hold books, art, or decorative objects, while integrated lighting doubles as reading lamps. Versatility comes from how you style it: a minimalist might keep it sparse and sculptural, while a maximalist might fill it with photos and plants.The practical element is obvious,you maximize vertical space in a room where floor space is often at a premium.6. Utilize Unexpected SpacesImage Source: PinterestSome of the most luxe and versatile shelving ideas come from using spaces people usually overlook. Think about the awkward area under the stairs, the side of a kitchen island, or even the space above door frames. With a little imagination, these zones can be transformed into clever shelving that not only provides storage but also feels intentional. For example, slim shelving built into stair risers can display books or wine bottles, instantly giving off a boutique feel. A shelf above a doorway can hold framed art or decorative boxes, lending architectural interest.7. Style a Glass Display CabinetImage Source: PinterestA glass display cabinet might sound traditional, but styled well, it becomes a luxe focal point in modern homes. Think slim-framed black steel or brass with tempered glass shelves that feel light and architectural. In the living room, it can showcase ceramics and art books; in a dining room, it becomes a stylish home for glassware and decanters. What makes it versatile is how it transitions between functions,you can even place one in a bathroom to display rolled towels and perfume bottles, giving off a spa vibe.8. Install Room-Dividing ShelvesImage Source: PinterestShelving that doubles as a room divider is both practical and indulgent. Instead of putting up walls, freestanding open shelves can subtly separate a living area from a dining space or a home office corner from a bedroom. Luxe finishes,walnut, matte black metal, or lacquer,help it feel upscale, while the open design keeps sightlines airy. Styling both sides thoughtfully makes the divider work double-time, with one side holding books and art, the other showcasing plants or baskets.9. Create a Wall-to-Wall BookshelfImage Source: martha stewartFew things say luxe quite like a dramatic wall-to-wall bookshelf. Whether in a living room, study, or even a bedroom, this approach makes an architectural statement while offering endless storage. Built-in shelves painted in the same tone as the walls look seamless and sophisticated, while contrasting wood or lacquer makes them pop. The versatility here is unmatched: they can hold books, art, collectibles, or even baskets for everyday items. Add a rolling ladder for a library vibe, or integrate lighting for a gallery-like effect.10. Add a Floating MantelImage Source: PinterestA floating mantel is essentially a shelf with style, instantly elevating living rooms or bedrooms with fireplaces. Unlike traditional bulky mantels, floating versions with clean lines feel sleek and modern. In marble, stone, or solid wood, they exude luxury, yet theyre practical because they double as a display surface for art, candles, or seasonal dcor. In smaller spaces, a floating mantel can even act as a slim shelf for books or photo frames, blending function with beauty. Because the design is pared down, it adapts easily to both minimalist and more layered interiors.11. Niche Shelving in HallwaysImage Source: PinterestHallways are often dead spaces, but adding recessed niche shelving transforms them into design moments. Think of slim, built-in ledges where you can place art, sculptures, or even stacked books. Painted in the same color as the wall, they feel seamless; lined with a luxe material like travertine or brass, they become statement features. Their versatility lies in how they can be restyled endlessly,rotating collections of pottery, candles, or framed prints.12. Ladder Shelves in Guest RoomsImage Source: PinterestLadder shelves lean against the wall, combining casual charm with upscale potential depending on the materials. In a guest room, theyre the perfect versatile piece: they can hold books, plants, a basket of toiletries, or even extra towels. Choose a dark wood or metal finish, and suddenly the piece feels chic rather than rustic. Because theyre freestanding, ladder shelves are also practical,you can move them around when rearranging. Their luxe element comes from their minimal footprint and the way they layer height into a room without overwhelming it.13. Kitchen Island ShelvingImage Source: PinterestA kitchen island with built-in shelving offers the ultimate blend of luxury and practicality. On the luxe side, it gives your island a furniture-like feel, especially when paired with natural stone or rich wood finishes. On the practical side, those shelves are perfect for cookbooks, decorative bowls, or baskets of linens. Because the shelving is open, it invites you to curate beautiful displays that can be swapped seasonally, perhaps fresh produce in summer or rustic pottery in fall.14. Stainless Steel Shelving in PantriesImage Source: PinterestPantries benefit from durability, but stainless steel shelving can also feel luxe when styled right. Industrial-grade shelves might conjure images of restaurants, but in a home pantry, they bring a clean, high-end utility look. Line them with glass jars of staples, wicker baskets, and labeled containers, and suddenly they feel less industrial and more like a chefs dream. The versatility lies in their adjustability, you can reconfigure shelf heights depending on what youre storing.15. Tiered Wall Shelving in EntrywaysImage Source: Happy HomesAn entryway sets the tone for the home, and tiered shelving makes it both welcoming and organized. Wall-mounted tiers can hold keys, mail, baskets for scarves, or even small decorative pieces. Luxe touches like brass brackets, walnut finishes, or marble ledges elevate the look beyond utility. Because its the first impression guests see, having styled shelves makes your home feel curated right from the door. The versatility here is huge, you can adjust whats on display depending on the season or your households needs16. Glass and Brass Shelving in the Dining RoomImage Source: PinterestGlass and brass shelving instantly elevates a dining room, offering both elegance and utility. The glass keeps the shelves airy and light, while brass accents add warmth and luxury. Use them to showcase glassware, wine bottles, or curated dish sets, almost like a boutique display. Their open design makes them versatile, blending seamlessly with both modern and traditional dcor. Add subtle lighting, and suddenly your dining essentials double as dcor, turning everyday meals into experiences that feel polished and refined.17. Modular Cube Shelving for Kids RoomImage Source: PinterestModular cube shelving is ideal for childrens rooms because it grows with them. The simple grid design makes it easy to mix open cubes with baskets or bins, keeping toys and books neatly organized. As kids get older, the same shelving can transition to hold school supplies, art projects, or even dcor. Luxe finishes like painted wood, lacquer, or rounded edges add polish while keeping things safe and stylish. Versatile, timeless, and endlessly customizable, modular cube shelving is a storage solution that adapts to every stage of childhood.18. Macram Hanging ShelvesImage Source: PinterestMacram shelving brings a soft, artisanal touch to any space while still being practical. Suspended by knotted cords, these shelves feel bohemian yet can look luxe when styled with plants, candles, or small dcor pieces. Theyre especially effective in bedrooms, nurseries, or living rooms where you want storage that doubles as wall art. Whether holding bedtime reads or greenery, macram shelves feel whimsical, stylish, and unique.19. Corner Shelving In BedroomImage Source: PinterestCorners often get wasted, but floating or built-in corner shelves turn them into functional highlights. In living rooms, they make space for books and plants; in kitchens, theyre perfect for spices or mugs; and in bathrooms, they neatly hold toiletries. Done in luxe finishes like marble, walnut, or lacquer, corner shelving feels intentional rather than filler. Their biggest strength is versatility, they save space in small rooms while adding character to larger ones.20. Weatherproof Patio ShelvesImage Source: PinterestOutdoor shelving can be both stylish and practical when built from weather-resistant materials like teak, powder-coated steel, or stone. These shelves elevate patios and balconies by holding plants, lanterns, or outdoor dining essentials while withstanding the elements. Their luxe feel comes from the finishes, sleek metal frames or warm natural wood, while their versatility shines in how easily they adapt through the seasons. In summer, they can host cocktail setups and potted herbs; in cooler months, they can display cozy lanterns or blankets.Finishing NotesShelving is far more than storage, its a design choice that can transform every corner of your home. From sleek floating shelves to playful cube systems, the right solution brings both elegance and adaptability. Each idea here proves that luxury doesnt have to sacrifice practicality; its about thoughtful details and versatile styling. At Home Designing, we believe even the simplest elements, like shelving, can redefine how a room feels and functions. Explore these ideas, reimagine your spaces, and let your shelves become more than utility: let them be part of the story your home tells.

Creatives are spoilt for choice with tech, so what will this iPad Pro bring to the party?

High speed trains have proved their worth across the world over the past 50 years.

As Luigi Mangione is being tried legally and in the court of public opinion, tensions are growing between his supporters pushing health care reform and those who believe he is innocent.

Trump administration officials have issued several legal threats over ICEBlock, a popular app that allows users to alert others to the presence of nearby immigration agents.