Corsair Overhauls Prebuilt, 3-Chamber Airflow Case, & Transparent PSUJune 5, 2025Last Updated: 2025-06-05We take a look at Corsair’s upcoming i600 pre-built PC, Air 5400 case, Frame 4000D prototype, and moreThe HighlightsCorsair’s i600 pre-built PC is a new revision on the company’s i500 and overhauls its GPU cooler and CPU radiatorThe Corsair Air 5400 is an airflow-targeted case that has air ducts on the top and bottom of its chassisCorsair has partnered with Singularity to develop the Frame 4000D prototype, which has an interesting power board that handles cable managementTable of ContentsAutoTOC Grab a GN Tear-Down Toolkit to support our AD-FREE reviews and IN-DEPTH testing while also getting a high-quality, highly portable 10-piece toolkit that was custom designed for use with video cards for repasting and water block installation. Includes a portable roll bag, hook hangers for pegboards, a storage compartment, and instructional GPU disassembly cards.IntroWe visited Corsair’s suite at Computex 2025 and liked some of the stuff the company had to show. Editor's note: This was originally published on May 21, 2025 as a video. This content has been adapted to written format for this article and is unchanged from the original publication.CreditsHostSteve BurkeCamera, Video EditingMike GaglioneVitalii MakhnovetsWriting, Web EditingJimmy ThangCorsair Air 5400Corsair will release its Air 5400, which is an airflow-targeted case. On the back side of the case is a giant hole, which couples with a front-mounted radiator that will allow the case to shove air straight out of it. This design allows it to focus air flow for the GPU entirely from its own set of fans at the bottom of the case. This is probably the most interesting case from Corsair we saw at Computex this year. It should be around $220, though that’s dependent on the everchanging tariff situation. Internally, the Air 5400 has a duct at the bottom where the case has 3x120mm fans (the entire case is actually set up to support all 120mm fans, which simplifies things). The duct is there to guide air into the GPU. Corsair claims that the case is getting about a 1-2 degree improvement with the duct in a like-for-like test. If you do end up with a front radiator, then a potential area that gets abandoned in terms of airflow might be around the VRM area and some of the board components like system memory.  There are mounts for fans up on top of the case along with an additional duct. Looking at the back of the case, there are 2 holes on the back, which is surprising for a 120mm fan. The spacing doesn’t look like it would fit a 120mm fan, but Corsair’s plan is to include a bracket that would adapt a 120mm fan here and would actually cut out into the glass area on the back, which would make you lose about 40% of the fan. This should help but raises some questions about whether it may cause acoustic issues when you partially blast air into a glass wall. Speaking of glass, the Air 5400’s glass is laminated. A couple companies are doing this now. Corsair says this helps the glass stay more put together to prevent shattering. Looking at the back side panel, there’s a big acrylic sheet coupled with an area where air can escape. Opening up the back panel, there’s a huge amount of cable-management depth. You can also see that the motherboard tray is punctured all of the way through. This causes concerns around structural rigidity, but Corsair is using a .8mm thick steel, which helps a little bit here. The company has also strengthened the case’s top panel compared to Corsair’s 4000D case, which received negative feedback in that area. The Air 5400 is set to be priced at $220 with 3x120mm fans included. i600 Grab a GN15 Large Anti-Static Modmat to celebrate our 15th Anniversary and for a high-quality PC building work surface. The Modmat features useful PC building diagrams and is anti-static conductive. Purchases directly fund our work! (or consider a direct donation or a Patreon contribution!)Corsair is updating its i500 pre-built PC, which we hated, with its upcoming i600, and the company has improved it a lot. The i500’s GPU cooling solution had basically no contact with any of the power components. The i600, on the other hand, has massive overhauls here. The case itself has only slightly changed, but the changes made accommodate larger radiators. The block for the video card, including the power components, is totally different in a way that looks promising. The stuff that jumped out to us right away about the i600 is the fin stacks for the VRM, which is connected to a shared copper nickel-plated base plate for the GPU and memory. Everything is connected to the same base plate, which is connected to the liquid cooler. This means all of the heat gets dumped into the liquid cooler. There’s pros and cons to this design. The pro is that all of the other components get cooled better. The downside is that the GPU itself is sharing the heat dissipation capacity with all of the other components in the cooler. This means you typically see some increase in the GPU temperature as a result. There’s ups and downs to this approach. It doesn’t necessarily mean one solution is better than the other as long as it’s all cooled. The i600 has copper bars, which contact the MOSFETs. Otherwise, it’s very similar to the i500. Corsair has also modified its CPU cooler radiator, where the company has moved its tanks off to the side. The tubes are also running in a different direction. Corsair is also moving to 25mm thick fans, where previously they had the slimmer 15mm fans. That extra 10mm will help with pressure and performance a lot. We plan on doing a review of the PC as soon as we buy one.Corsair Frame 4000DWe saw a prototype of Corsair’s Frame 4000D, where the company changed a few things. Corsair partnered with Singularity for its powerboard. It’s somewhat similar to Elmore’s BENCHLAB, with the exception of it not logging power. With the case, you basically run all of the power cables into the power board and then route them to their final locations. We count 10 fan headers here along with a bunch of RGB headers. There’s a lot of possibilities with this. Currently, it’s mostly being used as a cable-management tool, but you could, in theory, expand this to include more switches, like fan-control switches. We would really like to see current monitoring. It would make it more expensive but that could be a potentially useful direction to go in where you could monitor on the 12VHPWR, for instance, which would become a great marketing point for Corsair and would be very useful for end users. The front panel is also different as it has a die-cut edge now.  The power supply setup is also different here with Corsair doing an acrylic wall for the PSU instead of steel. The challenge here is that plastic is an incredibly good insulator. This could raise some ESD (electrostatic discharge) concerns and may cause the PSU to lose some of the shielding that steel provides. As a part of this design, Corsair has customized the caps and PCBs so that they get nice color matching. It looks pretty nice. 3D PrintingCorsair was telling us how for its upcoming 4000D and its Frame series cases, it was getting into 3D printable panels and pieces. They showed us how one Corsair employee 3D printed a shroud-like duct, which takes air in through the bottom and shoves it up into where the pump and reservoir are in the image above. These 3D print files are available on Corsair’s account on Printables.  Corsair 5000DWe didn’t care too much about it but Corsair also showed off its new 5000D that has a screen on it, which is a thing companies are doing now. They also had a 5000D case without the screen, which is a larger variant of the Frame 4000D case. Corsair says that it should be priced around $180, but that’s in flux with the tariffs situation.  Corsair Open Concept Visit our Patreon page to contribute a few dollars toward this website's operation (or consider a direct donation or buying something from our GN Store!) Additionally, when you purchase through links to retailers on our site, we may earn a small affiliate commission.Corsair’s open concept at Computex is using some of the same Frame components, where the company is trying to make the Frame series modular and represents an open frame. There’s also an option for fan mounts as well. The company showed a gigantic radiator tower at the show, which is pretty cool to see.

Nailing cross-channel marketing for your app is crucial in today’s ecosystem. This isn’t just a speculation, it’s a hard fact: the average mobile marketer uses 5 or fewer media sources, but CPIs tend to be much higher for marketers using 6 or more media sources, according to a report by Singular and ironSource Aura.It’s time to start looking elsewhere for users. Something to consider is returning to old-school, tried-and-true strategies that have taken a backseat as the industry has advanced, such as web acquisition campaigns. There are two clicks in these campaigns - the first click directs users from an ad to a web landing page and the second click directs users from the web page to the app store. While the funnel to get to your app is longer, it’s actually an opportunity. Let’s dive into why and how you should be running web-to-app acquisition campaigns.3 benefits of web-to-app campaignsWeb acquisition campaigns became tried-and-true for a reason and many apps are beginning to take advantage of the strategy to reduce costs, get better visibility, and expand their reach.Reduce costsWhile the cost of app acquisition campaigns is increasing as the space becomes more saturated, web campaigns have been underutilized in recent years. This means many advertisers are finding that the cost of web campaigns are less than app store acquisitions. Much of these higher costs comes from high app store fees - Apple takes a 30% cut from large developers and a 15% cut from smaller developers. The web remains a relatively low-cost, accessible channel.Get better visibilityWith the ability to direct users to your owned mobile site before they click to download your app, you get better visibility into new users and where they came from - the app store is a black box where it’s nearly impossible to match the user who clicked an ad to the user who downloaded your app. On top of that, longer funnels give you more control and insight into each step users take to get to your app - allowing you to better optimize your campaigns. For example, you can try out different web landing pages to find the most effective way to increase users’ understanding of your app before they download it. This increases your likelihood of, first, motivating users to download your app, and second, encouraging them to stick around.Expand your reachInternet users worldwide spent 415.5 minutes a day online in 2021 according to Oberlo. App users spend at most 300 mins a day in apps according to TechCrunch. The internet is still more prevalent than apps because, let’s face it, the web predates the app store. Even more so, users have become especially savvy on the web, visiting the search bar to research a brand, fact check a friend, or dive deeper into a news headline. This means that by running web campaigns, you’re reaching a massive audience - nearly the entire world population.Andre Kempe, Founder and CEO of Admiral Media says, “marketers consider web acquisition important because they’re reaching a different type of audience that may convert to becoming an active app user, even though they were surfing on a news website… When you start advertising for the web, you reach an audience you haven’t reached before. This is definitely a growth opportunity." Listen to the full podcast.Web campaigns are a tried and true strategy, which is what makes them so effective in today’s ecosystem. Realizing that you should be considering this acquisition channel, let’s discuss how web onboarding can help you maximize success.Maximize success with web onboardingTypically, users complete onboarding directly on your app. Web onboarding, however, means letting users register, subscribe, and sometimes pay on the web, before heading to your app. This way, users are fully prepared to start using your app before even clicking download, ensuring they can engage at full capacity as soon as download is complete.When users onboard through the app, they may not immediately decide to engage but at least the app is still on their phones reminding them everyday of its value - they’re likely to open it again at some point in time. When a user onboards on the web and decides your app isn’t valuable, they’ll never end up actually downloading it - it’s gone and forgotten before it even started. That said, with web onboarding, the users who end up downloading your app will do so with high-intent to actively engage. Plus, you don’t have to pay for users that download without ever engaging. Whatever category your app is - fitness, food delivery, dating, reading, learning, etc. - you can use the web touchpoint to drive quality users to your app.Ensure the transition is seamlessFirst, ensure the web experience mimics the app experience enough that users don’t feel jipped when they actually start using your app. The transition from the web to the app should be seamless. If you’re offering users a taste of your app, the web touchpoint should look exactly like your app or, at least, include all of the same features. If the buttons to adjust settings are on the right side of the page during onboarding, they should be on the right side in the app as well. To ensure users stick around, you have to give them what they signed up for.Give users a sneak peakYou should also determine your main selling point and give users a sneak peak. For example, if you’re a reading app that allows users to adjust the settings of the page, you could give users premium access to the first chapter of a book allowing them to adjust font size or brightness. Readers will not want to leave the experience behind, encouraging them to set up their subscription and input their credit card information on the web before heading to the app to continue reading the book. The best part - when they open your app for the first time they’ll be able to jump right into the app experience.Learn more about how to improve your app’s onboarding experienceWeb-to-app campaigns should not be ignored in this competitive landscape - lower costs, more visibility, better optimization, and strong reach. Going even further to onboard users through the web, you’re improving the quality of the users entering your app for the first time.

A Peloton perched in the living room. A set of weights on the bedroom floor. Some wellness products have a way of making their presence known. But even the smaller things—think daily supplements, mushroom tinctures, herbal teas—can slowly start to sprawl out everywhere. With the rise and awareness of holistic health habits, wellness routines that rival your skincare shelf, and obsessions like ProteinTok—a whole corner of the internet dedicated to everything protein—you might find that wellness has taken over your kitchen. Suddenly, your blender is battling for space with the hydration powders, collagen tubs, and stacks of snack bars. If you don’t have a place to properly store it all, your kitchen can start to be more overwhelming than calming. But with thoughtful design, proper planning, and smart storage solutions, you can integrate it all into your home in a way that feels serene and seamless. We asked designers and wellness experts how they manage their ever-expanding collection of products and design their kitchens with well-being in mind.Consider An Appliance GarageTessa NeustadtGreen cabinet doors conceal the appliances in this kitchen by Interior Archaeology.“For things that need to be in reach and on the counter, we put everything in an appliance garage,” shares Lynn Kloythanomsup of Landed Interiors and Homes. By that she means is a built-in cabinet or nook—typically integrated into the cabinetry—that features a door that lifts, rolls, or swings open and shut to conceal bulky appliances. Designer Hollie Velten of Spaces by Hollie Velten is also a fan of this feature and notices more clients requesting it. “A custom appliance garage allows things like tea supplies to be accessible for entertaining but hidden for everyday use.”It’s not just designers who advocate for this intentional placement—wellness experts themselves are just as mindful of it. “Our juicer must be on the countertop to make juicing as effortless as possible but other appliances are fine tucked away,” says health coach and nutritionist Daphne Javtich of Doing Well. Kerrilynn Pamer of Cap Beauty echoes this: “I keep my juicer on the counter, I have a Nama, and it’s pretty discreet even though it's large. Everything else, I keep behind doors.”Think Beyond The Main KitchenStacy Zarin GoldbergThis auxiliary kitchen by Kate Abt Design makes a perfect spot for wellness essentials.One luxury feature on the rise? Auxiliary kitchens, also known as dirty kitchens. “When designing for clients, we almost always have the ‘family’ or ‘show’ kitchen and then a second kitchen where the real cooking happens,” says Eric Egan of Eric Egan Interior Design. “This is much like in a restaurant show kitchen, where you see them finishing the meals, but you don't see the prep work or the clean up, all of which happens in the background.” Designer Sarah Barnard of Sarah Barnard Design has also seen an increase in the request of auxiliary kitchens and loves them because they “provide concealed storage for juicers, blenders, dehydrators, and food processors.” While two kitchens might not be realistic for everyone, if you have access to a nice-sized pantry or closet nearby, that’s an ideal spot to corral it all, as well. Rethink Unused SpacesKEVIN MIYAZAKIRemove the booze, bring in the blender, and this liquor cabinet, in a library designed by Kate Marker, could be a wellness station.Speaking of ideal spots for wellness, consider transforming underutilized spaces like liquor cabinets or part of a mudroom into a wellness hub. “We don't find that too many of our clients have a liquor cabinet or use a bar anymore,” shares Kloythanomsup. “So that area can be repurposed as a wellness area.” While you're repurposing it, consider where you can plug in all those wellness appliances. “Clients are also asking us to design technology-stations, so they have multiple areas to hide their technology and free their view of cords and distractions,” Velten says. Get In The ZoneEmma Farrer//Getty ImagesA dedicated tea zone.If you are going to dedicate counter space to your wellness routine, whether it’s a juicing zone, smoothie station, a hydration corner—keep things arranged in groups or zones. “I keep the bulk of my supplements and remedies in a large, shallow pullout drawer in the kitchen,” Javitch shares. “I find this is the easiest way to organize and find products quickly. And you don't have to remove some to get to others.”“I love setting up thoughtful, dedicated zones, like a wellness drawer with teas, vitamins, and tinctures all in one place, or a water station with a glass water pitcher, reusable bottles, and electrolytes,” shares Blakey. Keeping similar items together allows products to stay top of mind and prevents them from getting lost in the shuffle. Contain YourselfCourtesy Holly BlakeyA pantry organized by Holly Blakey of Breathing Room Home.While baskets are a no-brainer for kitchen organization, designers and experts say that’s for good reason, advising homeowners not to overlook them—and to keep the materials as natural as possible. “Wooden bins are another favorite way to add warmth and style while keeping items grouped,” Blakey says. Velten seconds the idea of rush baskets or wooden bins, “We try to push living finishes as much as we can because with proper care, material that came from the earth just vibrates differently.” No matter how many products you use or how dialed-in your routine may be, “wellness becomes part of the daily flow when your space helps you follow through on your intentions,” says Blakey. For that reason, says Javitch, “I always keep a few small baskets in our cabinets with products I often grab for like the kids' sunblock stick or their multivitamin gummies.”Show Off Your Stash Thomas LeonczikHollie Velten designed this kitchen to keep essentials on view. The alternative to hiding things away? Showing them off! “We worked with a client who described her kitchen goals as ‘California health kitchen,’” shares Velten. “We actually removed the upper cabinets to create an easy-to-access corner of shelving to hold glass jars and sustainable practices for her teas, herbs, spices, tinctures, and other food prep essentials.” After all, some items deserve to be seen—not only from an aesthetic perspective but also to prompt daily use and consistency. “I’ll usually keep my essential daily products on a pretty wood tray on the kitchen counter,” Javtich shares.If you are going to keep things out in the open, Bay Area-based organizer of Breathing Room Home Holly Blakey, says clarity is key. “I swear by glass containers for food storage, not just for sustainability, but because they help you know what you have and when you can clearly see your items, you’re more likely to use them before they expire.”Plus, this keep-it-all-out method a way to incorporate your personal preferences and add a little personality into your kitchen. “Sometimes well-kept essentials really only bring more joy and utility when out in the open,” Velten adds. Follow House Beautiful on Instagram and TikTok.

We’re delighted to reveal Monsters are Coming! Rock & Road, the next game from Ludogram, is being published by Raw Fury!  Just announced during The Mix Summer Game Showcase with a rip-roaring trailer, Monsters are Coming! Rock & Road is what we’re describing as a ‘Tower-Survivor’ game, mashing up tower defense with a horde survivor.   If you’re already liking what you’re seeing and hearing, you can sign up to the Closed Beta test which we’re aiming to start later this month. Just fill out the form here.  But let’s break this down and give you a grander overview of what the game is all about  Monsters are Coming: Rock & Road is an action rogue-lite where you begin each run controlling a peon, tasked with fighting back hordes and hordes (and hordes) of monsters attacking from all sides!  But the peon’s true objective is to protect a moving city – even at the expense of their own life – all while making sure its path isn’t obstructed by the environment, gathering enough resources to expand its potential. So where peons can respawn if they fall in battle, it’s only when the city is destroyed that your run is over!  Fortunately, the city can also protect itself through archery outposts, necromancy towers and even fire-breathing dragons. As long as you’ve got the coin, wood, gems and stone to fulfil the requirements, you can build a real fortress of destruction! Resources, by the way, you’ll have to gather while fighting and protecting the city, balancing risk versus reward.  Defeated monsters drop gems which you use to power up. And off the beaten path you can find even more, unexpected ways to give your Peon an edge in battle.   But despite the fast and furious pace of MaC: R&R, you will be able to find some respite at shelters. Here, you can take some time to decide what to spend your newfound wealth on and add even rarer buildings to your arsenal. Some of which affect your gold in-take or damage output, but you can also build towers that freeze monsters or spawn additional minions to repel the continued invasion.   Should you be defeated, at the end of each run you can also use your built up experience and resources to add permanent upgrades to your peon and city.   As you try to fight through four biomes, finding the right city build, selecting integral attributes to help you reach the Arch, you’ve definitely got your work cut out for you against some of the deadliest creatures you’ve had the misfortune to encounter.   Join the hordes BlueSky https://bsky.app/profile/monsterscoming.bsky.social Twitter https://x.com/_MonstersComing Discord https://discord.gg/mqnTkZBf The post Monsters are Coming! Rock & Road Announced at The Mix appeared first on Raw Fury.

Larry Fabbroni is an architect, strategic advisor, and Chief Innovation Officer for Practice of Architecture. Throughout his career, he has led efforts to reform studio culture and innovate practice. He earned his MBA from the University of Chicago’s Booth School of Business. In 2017, as leaders in the AIA’s Young Architects Forum (YAF), we led the launch of the Practice Innovation Lab (PIL) and hosted a symposium that imagined new architectural practice models. At that time, we already felt that practice innovation was overdue in a profession that has not seen scaled disruption to its business model in over a century. Today, we are confident that there has never been a more critical time for the profession to embrace innovation. Redefining Innovation Henley Hall: Institute for Energy Efficiency by KieranTimberlake, Santa Barbara, California | KieranTimberlake’s research expertise creates value beyond a baseline labor model.  Currently, artificial intelligence dominates strategy conversations, but just as we saw back in 2017, larger patterns prompt calls for innovation. Talent attraction is increasingly challenging, disruptive technology continues to emerge, and actors from outside our industry show growing interest in the space. While incremental innovation has long been a part of the profession, relatively few firms have adopted new practices that create value beyond a baseline labor model. Firms such as KieranTimberlake have shown that research expertise can do this. MASS Design has pioneered a mission-driven approach. BIG has taken on the role of architect-as-developer. Snøhetta houses a product design division. We could continue to list great firms that have pushed the boundaries of practice, but they represent exceptions that have yet to be recognized as new standards. Indeed, the confluence of those factors that led to the original PIL continues to make the case that the time for scaled innovation is now. A Melting Iceberg: Incremental Changes Depleting the Profession Powerhouse Telemark by Snøhetta, Vestfold og Telemark, Norway | Photo by Ivar Kvaal | Snøhetta houses a product design division, innovatively presenting a alternative business model for firms.  One of the dangers of operating in a slow-moving industry is that change is difficult to detect and even more challenging to comprehend. If an iceberg loses 1% of mass per year, it’s tough to take notice, but the end result is catastrophic. This is what is happening to our profession. For newcomers, if it feels like there are increasingly more attractive opportunities elsewhere, that’s because there are. For seasoned professionals, if it feels like it’s become more challenging to maintain the same levels of prosperity, that’s because it has. Less(er) Talent In some ways, the shift towards companies recognizing “talent” as their most excellent resource has bewildered architects: we have always relied on talent. However, the patterns of talent leaving our profession are concerning. We say “feel” because there is no significant data. We spoke to Kendall A. Nicholson, Senior Director of Research at the Association of Collegiate Schools of Architecture (ACSA), who confirmed that aggregated data on graduate placement does not exist. So we inquired about what placement looks like at several programs around the country. Omar Khan, Head of the Carnegie Mellon University School of Architecture, informed us that approximately 90% of students pursue a minor to expand their horizons, and that in 2022, nearly one in three graduates entered the tech sector. Khan stated that these opportunities aren’t just student-driven — large innovative companies increasingly seek the value that graduates of architecture schools will provide. This increasing difficulty in capturing the talent that architecture schools are producing results in a shrinking and diluted talent pool. For a profession so reliant on human resources, this presents extreme risk. Pay Gaps In an increasingly expensive world, we are not able to compete for the best talent with emerging industries. It’s easy to understand why a popular career pivot for architects has become UX design. Designing user experience for websites pays significantly better than designing the same for the built environment. According to Glassdoor, 2023 entry-level UX designers earned an average of $78K, while the AIA salary calculator suggests architecture grads can expect to earn an average of $59 K. The talent we do attract into the profession often loses interest when they experience low pay and long hours, all while most firms lack clear paths and criteria for advancement or compensation increases. A Smaller Piece of the Pie Examining data in isolation, one might conclude that the profession continues to grow; the number of architects has increased substantially over the last century, and this trend has persisted in recent years. The problem with this growth is that the estimated share of the US GDP for Architectural Services has shrunk over time. This is not a manageable number to measure before 1999, when NCARB first aggregated local jurisdictional data. Due to limitations in industry economic data, we’re only showing data since 2011 for the purposes of this article. In that time, the number of architects has grown, the market size for services has grown, but the share those services represent as a portion of the US GDP has declined — by 15% if we use US Census data to almost 30% if we use industry research data (we used IbisWorld.com, however we found data that suggested a worse and others that offered a slightly better picture). To put it another way, architecture is a stagnant industry with a shrinking share of the economy. It’s challenging to examine this data and emerge feeling confident about the profession, but there is a silver lining. The biggest impediment to innovation for architects is not a lack of talent, but rather the business model. Design thinking has been widely adopted throughout the world as a key component of innovation processes; however, the problem is that we operate in the realm of professional services, which inherently is not well-suited to promoting innovation. Reliance on that formula is causing our iceberg to melt. The Tsunami: The AI Tidal Wave is Here The Rwanda Institute for Conservation Agriculture by MASS Design Group, Rwanda | MASS Design has pioneered a mission-driven approach that creates value beyond a baseline labor model.  As we confront the exodus of talent, it is easy for both firm owners and clients to imagine AI bringing efficiencies and replacing “CAD-monkeys” with machines. However, any firm that wants to operate — and win — as anything more than a low-cost provider will need a strategy to increase value, not just cut costs. AI is merely part of the toolbox required to confront a perfect storm of forces. Jobs will Disappear Goldman Sachs predicts that as much as 37% of our industry tasks will be replaced by AI. Many see this as a pathway to lower costs and increased profits. However, that is short-sighted. Markets will adjust quickly and demand lower costs for services; additional new value will need to be articulated and proven, and this will only happen through innovation. New Jobs will Emerge (but fewer of them) AI prophets often emphasize that technological innovation has historically led to net employment gains. Previous World Economic Forum estimates predicted losses of up to 85 million existing jobs worldwide, with parallel gains of as many as 97 million new jobs. However, these estimates were revised in the WEF 2023 Economic Outlook, which now anticipates a net loss of 14 million jobs. This stark outlook signals an even greater need for architects to become more innovative. The 2024 RIBA AI Report indicates that 41% of architecture firms were already utilizing AI, though current tools are indeed just the beginning. Marketing, business development and content creation will be standard areas of AI deployment moving forward. Still, revolutionary changes will come in how we learn, not only to use new tools, but also to collaborate with digital agents. How will this happen? We can theorize, but it is not possible to know for sure until it arrives, so we need to have a plan before we can see the tidal wave from land. The Alien Invasion: Outsiders Are Entering Our Orbit VIA 57 West by BIG – Bjarke Ingels Group, New York City, New York | BIG has pioneered a new model for practice by taking on the role of architect-as-developer. For years, we’ve heard cries that “architects gave away the role of master builder.” But how much did architects actually give, and how much was taken by innovative competition? This distinction is critical because the wagons are circling, and the AEC space has become ever more attractive to investors. Venture Capital and Private Equity Investment The numbers are often difficult to parse because architecture can impact so many verticals and does not operate as its own sector in the investment realm; however, the trends suggest a groundswell is underway. A 2023 McKinsey report shows that construction tech deals nearly doubled from 2019 to 2022, growing by 85%. At the same period, the number of deals increased by 30%, indicating that interest continues to grow. An increasing size of deals also suggests a maturity of the market. As interest in infrastructure investments has declined from its high in 2020, and along with real estate, has been blunted by high interest rates, institutional investors continue to see opportunities in the AEC space. Firm Acquisitions AEC firms that deliver predictable returns have proven to be attractive targets for PE firms. In the second quarter of 2024, private equity firms accounted for over one-third of AEC firm mergers and acquisitions. For M&A deals, the industry has seen an increase in attractiveness with expanded infrastructure spending as a catalyst. However, this interest can also be tied to the lack of innovation that has resulted in an industry ripe for consolidation. M&A orchestrators generate large amounts of profit by streamlining operations, eliminating redundancies, and then stamping out competition. An entire community has been built around this, with AEC Advisors hosting an annual “Private Equity Summit” that brings together CEOs of AEC firms with PE investors. Startups As an extension of the growing interest from venture capital in the space, there is an upward trend in the AEC space being targeted for disruption by entrepreneurs who see an industry that represents a significant portion of the global GDP. AEC Works, a project of e-verse that catalogs AEC startups and investors, lists nearly 800 startups from around the world, with almost 200 identified as “architecture-focused.” The signal is clear: startups are looking to figure out how to do what you do cheaper, better, or perhaps both. Combining this environment with depleted talent pools, a declining share of GDP, and revolutionary technology, it is a correct response to be alarmed. Significant change is inevitable. It is time for architects to see the same opportunities that investors and entrepreneurs see, and learn to navigate within these spaces. The Great Opportunity Throughout history, new actors have enjoyed a “leap-frog” effect and been able to surpass established incumbents to reshape industries, markets and economies. From climate change to pandemic ripple effects, to the housing crisis, to generational shifts in the workforce, there are many forces that directly impact the work of architects and call for innovation. The need for new ways of designing and delivering different components of the built environment is ever-present and will be solved by teams that either include — and might be led by — architects, or those that do not. Most end users will only care if the resulting product is superior. This time of tension is indeed a time of great opportunity. Architects who embrace innovation in pursuing new iterations of our dated business models may actually achieve what many of us have dreamed of from the start: to leave a positive mark on the world. We think the future of the profession depends on it. Top image: Powerhouse Telemark by Snøhetta, Vestfold og Telemark, Norway The post Architects, Your Real Competition Isn’t AI — It’s Business Complacency appeared first on Journal.

When it comes to Apple, all eyes are on AI. Generative AI (genAI) is the most disruptive technology we’ve seen in years; it is weaving itself into all parts of life – so why should IT management be left unscathed? It won’t be, and the latest AI-powered IT management features within the Jamf platform will soon be the kind of tools IT expects. Jamf is a leading Apple-in-the-enterprise device management (and security vendor recently began offering enterprise support for Android devices). The company has been working away on AI features to support its solutions for some time, and has at last introduced some of these at its Jamf Nation Live event. The tools are designed to boost efficiency and support better decision-making when it comes to handling your fleets. Of course, you’d expect anyone fielding genAI solutions to say something like that, so what do these tools do? Introducing Jamf AI Assistant Available as a beta, AI Assistant is designed to support tech support! That means it will help IT admins find what they need and help them understand how and why devices they do find are configured. Jamf splits these two paths into two categories: Search skill and Explain skill. Search skill lets admins perform natural language inventory queries across their managed fleets, enabling them to quickly find devices within their flotilla that meet the search parameters. The goal is to make it quicker and easier to audit managed devices for compliance, and to troubleshoot when things go wrong. Explain skill caters to another facet of an IT admin’s daily challenges. As Jamf explains, it means the genAI can translate complex configurations and policies into clear, easy-to-understand language. This helps admins make informed decisions, streamline troubleshooting and manage policies more confidently, says Jamf. While these new Jamf tools don’t automate much of the workload facing IT, it’s not hard to see how once the AI can understand what’s happening on a Mac and identify those devices that meet a set of parameters, the only missing piece is to automate some of the workflow in between. This, of course, is the direction of travel and will likely ripple across IT and every platform. Who knows, it might even make the cost of supporting Windows fleets almost as affordable as that of managing fleets of Apple devices. (Though I doubt it.) Beyond AI Jamf also made a handful of announcements outside of AI, including the general availability of Blueprints, a set of tools the company announced at JNUC last year. Blueprints builds on Apple’s Declarative Device Management framework and is designed to simplify and accelerate device configuration by consolidating policies, profiles and restrictions into a single, unified workflow. This makes a lot of sense on a road map to further AI deployment, as well as for anyone attempting to manage and deploy large Apple fleets. I imagine admins preparing for mammoth college- or school-wide deployments will have some optimism that Blueprints could help save time. Don’t neglect that education tech is expected to deploy thousands of devices in a few weeks, so these tools should be significant to them. Jamf continues working on Blueprints, and has introduced a beta release of Configuration Profiles within Blueprints. This tech consists of a new dynamic framework designed to help teams manage devices at scale, thanks to the new dynamic framework for MDM key delivery. Ticket to ride Jamf has offered a Self Service+ portal since earlier this year. Aimed at end-users, the system lets users request, download and update apps, as well as monitor their device security. Those features have been expanded with identity management tools, so users can view their accounts change passwords, and request things like temporary admin access. The beauty of Self Service+ is that it enables users to do these things autonomously while keeping their devices fully auditable and compliant. The idea is that it’s a lot better to focus the expensive tech support teams on the big problems, rather than seeing them bogged down in small, transient (albeit important), challenges.  The company also introduced Compliance Benchmarks. Based on Apple’s macOS Security Compliance Project (mSCP), this system helps IT automate the process of securing their Apple devices. Jamf has also added malware detection to its App Installers module, which means every application made available through that system is scanned to maintain security confidence. That’s really important to companies attempting to provision apps to employees, particularly if they want to avoid accidental installs of hacked malware posing as the original app. You can follow me on social media! Join me on BlueSky,  LinkedIn, and Mastodon.

In my last Fast Company column, I shared my reasons for manufacturing my electric trucks in the U.S. I’m not alone. While near-shoring to North America has been underway for several years, the current tariff shifts and shipping complexities make U.S. manufacturing a higher priority still. However, there were 292,825 factories in the U.S. as of 2021. Of those, 846 employ 1,000 people or more. Some of these are my engineering firm’s clients, giving us a front row seat to the complexity of retrofitting an existing factory to full U.S. manufacturing. While building a new factory is expensive and lengthy, these companies’ tasks are more difficult still. There are good reasons for making the shift as quickly as possible. Moving to most or fully U.S. manufacturing brings higher visibility, faster response time, and higher resilience to supply chain disruption, as well as greater protection from tariff shifts and geopolitical change. But if you’re early in the process, here’s my advice for your transition: Determine a priority ranking for the refining and raw materials you shift to in-country and North American sourcing. Give highest ranking to categories including defense, high value items (such as steel, aluminum, and rare minerals, etc.), and consumer safety items (such as pharmaceutical components, etc.). Be more strategic in the offshore suppliers you continue using for non-advanced manufacturing by prioritizing closer and more geographic-friendly locations for production and shipment such as Mexico and Argentina. Utilize government-backed capital, where possible, for extracting/mining minerals and metals such as lithium, red mud, magnesium, etc. Beyond the high-ranking product categories, move to domestic suppliers for primary materials such as steel, aluminum, cement, and plastics. Likewise, reduce offshoring of technical staff as well as raw materials, where possible. Use all means possible to become power independent through solar production, micro-grids, and nuclear power production. Consider creating a 4-year completion bonus for military vets. Hire vets wherever possible, as they make great workers and entrepreneurs. Likewise, we can press for future policy changes that best support Made in America manufacturing, as follows: Encourage ship building in the U.S., as well as creating new means of automated freight transit. Work towards transformation plans for government-funded R&D to include more attractive loans, rebates, and grants, as well as programs for tax-free status for intellectual property during commercialization, to incent and support organizations making the shift. Consider energy rebates to U.S. manufacturers and distributors to make American manufacturing more cost-effective and viable.   Create policies to include the cost of offshore staff in tariff calculations. Expand trade relationships with Caribbean nations for products such as sugar, avocados, bananas, etc. Avoid or even ban foreign ownership of the food supply chain. Create fair competition for government contracting. Make health supplements and homeopathic medicines tax deductible, to promote a healthy workforce. While it may not be readily evident, these policy changes are related to successful reshoring. In all, we need larger scale, lower costs, and more automated and simplified mechanisms for product manufacturing. These issues, in my experience, are as equally important as the raw materials we require. We need increased support for niche manufacturing. In my opinion, we also need deregulation, and increased access to land (particularly in the west; the federal government owns great quantities of the available land, which is choking available supply). I believe we need better education, self-reliance, health, and incentive structures to get the capital, entrepreneurs, and workers for Made in America manufacturing. Who’s with me? Matthew Chang is the founding partner of Chang Robotics.

iOS 19—or is it iOS 26, as rumors suggest?—is nearly here. Apple will almost assuredly announce the latest version of the iPhone's OS next week at WWDC 2025. As such, rumors about iOS 26's features have been coming in fast, and only more so as we approach the big event. Although none of these rumors can be confirmed at the moment, they still give us a good idea about what Apple might be considering behind the scenes.Is Apple changing iOS' name?Seems that way. While we (logically) thought the next version of iOS would be called iOS 19, Apple reportedly has other plans in place. According to Bloomberg's Mark Gurman, iOS 19 will be iOS 26, taking the name of the following year. Apple is reportedly doing this with all of its OS titles, including iPadOS 26, macOS 26, watchOS 26, and visionOS 26. A fresh look for iOS 26While iOS has changed considerably in recent years, the overall design language still follows the last big UI overhaul: 2013's iOS 7. It's been nearly 12 years since Apple has mixed things up, leaving users to design their own Lock Screens and app icons. According to Gurman, however, that might change with iOS 26, as well as iPadOS 26 and macOS 26. The details are scarce, but Gurman reports sources within Apple say the company wants to better align the design languages across its various products, without merging those OSes entirely, while also simplifying the way you interact with these devices. That means iOS 26 could adopt the design of visionOS, which uses circles instead of squares for app icons, translucent window elements, and the adoption of 3D—though that latter element may be difficult to translate on a 2D display.You can see those elements on display in this concept video from Jon Prosser. If the rumors are correct, we could be looking at "one of the most dramatic software overhauls in the company’s history." In addition to a new look, iOS may be getting a little less buggy. Gurman says that stability is a big priority for Apple this year, which is music to my ears.Live translation for AirPodsGurman also says that Apple is working on a live translation feature for certain AirPods models. If you're having a conversation with someone who is speaking a language you don't know, your AirPods will translate and dictate those words in your target language automatically. When you speak, your words will be translated and dictated by your iPhone, via the Translate app. This feature isn't groundbreaking—Google's Pixel Buds have offered it for years. But it'd be a great addition to iOS 26, and to AirPods users. Accessibility featuresApple doesn't reveal much about its upcoming updates before officially announcing them, but accessibility features are an exception. Last month, the company unveiled a list of accessibility features coming to devices "later this year." While they don't name iOS 26 and other "26" updates, it's pretty obvious those are the updates we'll see them in. There's a new Accessibility Reader feature that makes text easier to read across iOS; Magnifier is coming to Mac; you'll see "Accessibility nutrition" labels on the App Store, to denote how accessible an app is; Apple Watch is getting Live Captions, and Vehicle Motion Cues are coming to the Mac. 'Desktop' modeRumor has it that Apple is working on a "Stage Manager-like" desktop mode for USB-C iPhones with iOS 26. The feature would let you plug your iPhone into an external monitor, so you can extend your iPhone's screen to the larger display.This might not be a true "desktop mode" experience, like Samsung DeX, in that you might not be able to use your iPhone as a portable computer this way. But it could make it easier to share your iPhone's display when you want to connect to a larger screen. You only need to sign into public wifi networks onceIf you use multiple devices on public wifi networks, it's a pain to connect each one manually. That might be changing with Apple's upcoming updates: Gurman says that once updated, you'll only need to log into the wifi with one Apple device (your iPhone, iPad, or Mac) and the rest will automatically connect.Battery upgradesHere's a great use for AI: optimizing battery life. Rumor has it iOS 26 will analyze your usage habits and determine the right times to lower performance in the name of preserving battery life. Extending the amount of time between charges is something we can all get behind. In addition, the company may add a charging indicator to the lock screen, so you know how long your battery has left to charge. This small feature has been sorely missing on iPhones for years. Apple offers it on MacBooks, but only in Activity Monitor. I hope its brings it back to the menu bar in a future update. Your iPhone will (probably) run iOS 26With any luck, your current iPhone should be compatible with iOS 26, assuming you're currently running the latest software. Citing a source within Apple, French website iPhoneSoft.fr reports that any phone that runs iOS 18 should be compatible with iOS 26 as well. However, the iPad 7 will supposedly not be so lucky, as the website says it will not be included in the iPadOS 26 update.However, a MacRumors source says that Apple plans to drop the iPhone XR, XS, and XS Max this year. We'll have to wait and see what Apple announces on Monday to find out which phones will still be supported.A new gaming appAccording to Gurman, Apple is working on a dedicated gaming app for iOS, iPadOS, macOS, and tvOS, meant to replace the existing Game Center. The app will both let you launch titles, as well as check leader boards, chat with friends, and see your achievements. If true, it'll be interesting timing, considering the announcement will come four days after the launch of the Nintendo Switch 2. I have my doubts that such an app could compete with a gaming titan like Nintendo, or that this will really expand beyond the traditional short and sweet mobile game experience, but who knows. Maybe Apple is about to become a serious gaming company. (I doubt it.)Shortcuts get Apple Intelligence integrationThe Shortcuts app lets you set up "shortcuts," which you can use to automate tasks across your Apple devices. Gurman says with iOS 26, Apple is integrating Apple Intelligence into the Shortcuts app, which might let you create shortcuts with natural language—or, in other words, describe the shortcuts you want and have the AI build them for you. Small updatesAccording to 9to5Mac, Apple has plans to add a new feature or two to a handful of apps. That includes:Messages: Automatic translation for incoming and outgoing messages, as well as polls.Music: Full-screen animated artwork on the lock screenNotes: Markdown support, a huge plus for pro-notes usersCarPlay: A redesigned UI to compliment iOS 26The merging of Siri and Apple IntelligenceAccording to Gurman, Apple plans to merge Siri with Apple Intelligence sometime during the iOS 26 patch cycle. Yes, the assistant is currently listed as being part of Apple Intelligence, but behind the scenes, it supposedly has a new LLM in the works that would unify its currently split architecture and allow it to more frequently handle complex requests. As of now, its AI features are much more limited, and most of Siri doesn't use this type of AI at all.Gurman says he expects the merger to be completed by spring of 2026 with the launch of iOS 26.4. His report states that, originally, Apple's plan was to launch a more conversational Siri in the same update, but that's been delayed and is not expected to be unveiled at WWDC 2025.Gurman also indicates that because Apple has not yet completed last year's Apple Intelligence feature rollout, any unannounced features shouldn't be expected for a while.