Researchers from the National University of Singaporehave developed a 3D printed, self-powered mechanoluminescentphotonic skin designed for communication and safety monitoring in underwater environments. The stretchable device emits light in response to mechanical deformation, requires no external power source, and remains functional under conditions such as high salinity and extreme temperatures. The findings were published in Advanced Materials by Xiaolu Sun, Shaohua Ling, Zhihang Qin, Jinrun Zhou, Quangang Shi, Zhuangjian Liu, and Yu Jun Tan. The research was conducted at NUS and Singapore’s Agency for Science, Technology and Research. Schematic of the 3D printed mechanoluminescent photonic skin showing fabrication steps and light emission under deformation. Image via Sun et al., Advanced Materials. 3D printing stretchable light-emitting skins with auxetic geometry The photonic skin was produced using a 3D printing method called direct-ink-writing, which involves extruding a specially formulated ink through a fine nozzle to build up complex structures layer by layer. In this case, the ink was made by mixing tiny particles of zinc sulfide doped with copper, a material that glows when stretched, with a flexible silicone rubber. These particles serve as the active ingredient that lights up when the material is deformed, while the silicone acts as a soft, stretchable support structure. To make the device more adaptable to movement and curved surfaces, like human skin or underwater equipment, the researchers printed it using auxetic designs. Auxetic structures have a rare mechanical property known as a negative Poisson’s ratio. Unlike most materials, which become thinner when stretched, auxetic designs expand laterally under tension. This makes them ideal for conforming to curved or irregular surfaces, such as joints, flexible robots, or underwater gear, without wrinkling or detaching. Encapsulating the printed skin in a clear silicone layer further improves performance by distributing mechanical stress evenly. This prevents localized tearing and ensures that the light emission remains bright and uniform, even after 10,000 cycles of stretching and relaxing. In previous stretchable light-emitting devices, uneven stress often led to dimming, flickering, or early material failure. Mechanical and optical performance of encapsulated photonic skin across 10,000 stretch cycles. Image via Sun et al., Advanced Materials. Underwater signaling, robotics, and gas leak detection The team demonstrated multiple applications for the photonic skin. When integrated into wearable gloves, the skin enabled light-based Morse code communication through simple finger gestures. Bending one or more fingers activated the mechanoluminescence, emitting visible flashes that corresponded to messages such as “UP,” “OK,” or “SOS.” The system remained fully functional when submerged in cold water, simulating deep-sea conditions. In a separate test, the skin was applied to a gas tank mock-up to monitor for leaks. A pinhole defect was covered with the printed skin and sealed using stretchable tape. When pressurized air escaped through the leak, the localized mechanical force caused a bright cyan glow at the exact leak site, offering a passive, electronics-free alternative to conventional gas sensors. To test performance on soft and mobile platforms, the researchers also mounted the photonic skin onto a robotic fish. As the robot swam through water tanks at different temperatures, the skin continued to light up reliably, demonstrating its resilience and utility for marine robotics. Comparison of printed photonic skin structures with different geometries and their conformability to complex surfaces. Image via Sun et al., Advanced Materials. Toward electronics-free underwater communication While LEDs and optical fibers are widely used in underwater lighting systems, their dependence on rigid form factors and external power makes them unsuitable for dynamic, flexible applications. In contrast, the stretchable ML photonic skin developed by NUS researchers provides a self-powered, adaptable alternative for diver signaling, robotic inspection, and leak detection, potentially transforming the toolkit for underwater communication and safety systems. Future directions include enhanced sensory integration and robotic applications, as the team continues exploring robust photonic systems for extreme environments. Photonic skin integrated into gloves for Morse code signaling and applied to robotic fish and gas tanks for underwater safety monitoring. Image via Sun et al., Advanced Materials. The rise of 3D printed multifunctional materials The development of the photonic skin reflects a broader trend in additive manufacturing toward multifunctional materials, structures that serve more than a structural role. Researchers are increasingly using multimaterial 3D printing to embed sensing, actuation, and signaling functions directly into devices. For example, recent work by SUSTech and City University of Hong Kong on thick-panel origami structures showed how multimaterial printing can enable large, foldable systems with high strength and motion control. These and other advances, including conductive FDM processes and Lithoz’s multimaterial ceramic tools, mark a shift toward printing entire systems. The NUS photonic skin fits squarely within this movement, combining mechanical adaptability, environmental durability, and real-time optical output into a single printable form. Read the full article in Advanced Materials Subscribe to the 3D Printing Industry newsletter to keep up with the latest 3D printing news. You can also follow us onLinkedIn and subscribe to the 3D Printing Industry YouTube channel to access more exclusive content. At 3DPI, our mission is to deliver high-quality journalism, technical insight, and industry intelligence to professionals across the AM ecosystem.Help us shape the future of 3D printing industry news with our2025 reader survey. Featured image shows a schematic of the 3D printed mechanoluminescent photonic skin showing fabrication steps and light emission under deformation. Image via Sun et al., Advanced Materials. #nus #researchers #print #selfpowered #photonic

Mario Kart World comes at you fastAfter a dozen hours with the biggest game on Nintendo Switch 2, GameCentral tries to evaluate the surprisingly controversial new Mario Kart game. It’s very obvious why Mario Kart World is the main launch title for the Nintendo Switch 2: it’s been over a decade since the last one and Mario Kart 8 is one of the best-selling video games of all-time. Much of that success is due to the innate simplicity of the concept and the easy accessibility of its controls, so it’s surprising that Mario Kart World has been so difficult for people to get their heads around. We’ve played it three times now, for increasingly long lengths of time, the previous time being at a press event with a host of other journos. But now that we have a Nintendo Switch 2 of our own, we’ve been able to spend even longer exploring the game at our leisure and we’ve come to the conclusion that Nintendo’s marketing for the game is doing it a disservice. It emphasises the fact that the game has a massive open world but as soon as you start playing, it becomes obvious that the designers must consider that to be a relatively minor part of the game. Or at least the idea that you can roam around at will, looking for secrets. You can do that, but despite what we and many others assumed it’s very much a side activity. This is made obvious by the fact that the option to free roam is not part of the main menu for the game, instead there’s an easily missed prompt to press the ‘+’ button and explore the open world at will. This is a lot of fun, because the open world is phenomenally well designed – full of secret pathways and tempting scenery to jump off and grind on – but what’s putting people off is there’s very little structured gameplay for it. There are a variety of objects to look out for – such as P-switches, ? panels, and special medallions – but all they do is unlock small stickers you can customise your vehicle with. The P-switches activate missions, which are the most complex activity, but most of the time they involve simply collecting blue coins or competing in a mini-race. There are a few more unusual examples but most barely last 60 seconds, when you beat them, and that’s as complicated as the open world gameplay ever gets. It is enjoyable, and we’ve spent many happy hours already searching for secrets, but there’s no question that the open world feels underutilised – an afterthought almost. Expert, exclusive gaming analysis Sign up to the GameCentral newsletter for a unique take on the week in gaming, alongside the latest reviews and more. Delivered to your inbox every Saturday morning. Although other AI racers can occasionally be seen driving around you can’t interact with them, there’s no story or dialogue, and no complex mission scenarios. What’s more, you can’t meet random online players in the open world and even if you invite friends all you can do is take photos with them. You can choose to start one of the other modes from within the open world but we’re very surprised that you can’t set up your own point-to-point races. Instead, all you can do is create a custom Grand Prix by choosing which track to go to once each one ends. We point all this out because these details weren’t clear beforehand and because it’s almost certainly going to be the main complaint against the game. But while it is certainly a missed opportunity, it doesn’t negatively affect the actual focus of the game. It seems that the ability to free roam is intended as essentially a bonus. The real changes to the game are in terms of the nature of the tracks, which rather than being a succession of completely unconnected circuits all flow from one to another. Often they’re not circuits at all, but linear races from one point to another, as you work your way across the world map. Since they’re all in the same corner of the world, a Grand Prix often has a consistent theme, such as snowy or desert levels, and specific elements, like dinosaurs or boos, can appear at the beginning and end of adjoining tracks, reinforcing the impression that it’s all one giant race. The graphics are very impressiveThat concept seems to have come first and the open world followed, even though technically it’s not needed – or at least not to the level of detail that Nintendo has gone with. But either way, the courses in Mario Kart World are excellent, with wildly different designs even for returning tracks. The new ones are especially good though, with Boo Cinema, where you travel through the screen and into the film itself, being our current favourite. Although the ones with Wave Race 64 style water physics are also all uniformly excellent. The action may seem similar in video clips but it’s really quite different to Mario Kart 8. And not just because of the wider roads, new enemies, and the fact that there’s now 24 racers on every track. There’s now far more shortcuts and alternate routes, which seems like it should end up making races feel disjointed and unbalanced but it doesn’t, thanks to the levelling effect of items and the fact that sooner or later everyone is still being funnelled down the same path. The abundance of point-to-point races is a significant change to the Mario Kart norm and not only does it spice up Grand Prix mode but it allows for the superb Knockout Tour. This is a far more significant addition than free roam, even though it’s a simple sudden death mode, where you have to reach a certain position by the end of a track or you’re out of the game. In Grand Prix you can try and make up for a bad performance in the next race but with Knockout the tension is sky high throughout, and it works brilliantly, especially online. When we started playing the game, on Wednesday afternoon, there were only a handful online, but over the course of Thursday morning the matches became full and everything came alive. Playing against 23 other humans also helps to emphasise the fact that while Mario Kart World does make certain things easier – like automatically holding items behind you as a shield or allowing for a little more leeway when escaping shells – this is absolutely still a game of skill. Playing online, we could see the same names consistently doing well and ourselves… enjoying the mid-table mediocrity that we usually do, when faced with talented opposition. Not that that ever put us off. On the contrary, we spent almost every match grinning inanely at the sheer Mario Kart-ness of it all. We will still need to play more to do a full review though – we haven’t played a lot on 150cc yet and we only got an hour or two with the online. However, at this point we do feel we’ve seen the basics of what the game is. More Trending It’s a strange one to be sure, in what is usually one of Nintendo’s most straightforward franchises, but while anyone can look at the open world and think of a dozen other things that could’ve been done with it, the actual racing is top notch. Mechanically it’s not significantly different from Mario Kart 8 but then the series is not a very malleable one, and this does as much as it can to mix things up – and all without resorting to gimmicks. In terms of a score, we’re not looking at a 10/10. Mario Kart World is many things but it’s not perfect, not like Mario Kart 8 Deluxe. We’ll have to spend more time with it to determine if it suits an 8 or 9/10 but longevity has never been a problem for the series, so we imagine it’ll be the higher of the two. Given how late Nintendo was in sending out consoles that’s all we can say for now but while this is not quite the game many will have been expecting, and it does leave a lot on the table, it’s still an excellent game and a great introduction to the Switch 2. Formats: Nintendo Switch 2Price: £74.99or £66.99Publisher: NintendoDeveloper: Nintendo EPDRelease Date: 5th June 2025Age Rating: 3 There’s unlockable costumes for all the named charactersEmail gamecentral@metro.co.uk, leave a comment below, follow us on Twitter. To submit Inbox letters and Reader’s Features more easily, without the need to send an email, just use our Submit Stuff page here. For more stories like this, check our Gaming page. GameCentral Sign up for exclusive analysis, latest releases, and bonus community content. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply. Your information will be used in line with our Privacy Policy #mario #kart #world #review #progress

After detailing the VFX work on The Last of Us Season 1 in 2023, Alex Wang returns to reflect on how the scope and complexity have evolved in Season 2. With close to 30 years of experience in the visual effects industry, Fiona Campbell Westgate has contributed to major productions such as Ghost in the Shell, Avatar: The Way of Water, Ant-Man and the Wasp: Quantumania, and Nyad. Her work on Nyad earned her a VES Award for Outstanding Supporting Visual Effects in a Photoreal Feature. Collaboration with Craig Mazin and Neil Druckmann is key to shaping the visual universe of The Last of Us. Can you share with us how you work with them and how they influence the visual direction of the series? Alex Wang // Craig visualizes the shot or scene before putting words on the page. His writing is always exceptionally detailed and descriptive, ultimately helping us to imagine the shot. Of course, no one understands The Last of Us better than Neil, who knows all aspects of the lore very well. He’s done much research and design work with the Naughty Dog team, so he gives us good guidance regarding creature and environment designs. I always try to begin with concept art to get the ball rolling with Craig and Neil’s ideas. This season, we collaborated with Chromatic Studios for concept art. They also contributed to the games, so I felt that continuity was beneficial for our show. Fiona Campbell Westgate // From the outset, it was clear that collaborating with Craig would be an exceptional experience. Early meetings revealed just how personable and invested Craig is. He works closely with every department to ensure that each episode is done to the highest level. Craig places unwavering trust in our VFX Supervisor, Alex Wang. They have an understanding between them that lends to an exceptional partnership. As the VFX Producer, I know how vital the dynamic between the Showrunner and VFX Supervisor is; working with these two has made for one of the best professional experiences of my career.  Photograph by Liane Hentscher/HBO How has your collaboration with Craig evolved between the first and second seasons? Were there any adjustments in the visual approach or narrative techniques you made this season? Alex Wang // Since everything was new in Season 1, we dedicated a lot of time and effort to exploring the show’s visual language, and we all learned a great deal about what worked and what didn’t for the show. In my initial conversations with Craig about Season 2, it was clear that he wanted to expand the show’s scope by utilizing what we established and learned in Season 1. He felt significantly more at ease fully committing to using VFX to help tell the story this season. The first season involved multiple VFX studios to handle the complexity of the effects. How did you divide the work among different studios for the second season? Alex Wang // Most of the vendors this season were also in Season 1, so we already had a shorthand. The VFX Producer, Fiona Campbell Westgate, and I work closely together to decide how to divide the work among our vendors. The type of work needs to be well-suited for the vendor and fit into our budget and schedule. We were extremely fortunate to have the vendors we did this season. I want to take this opportunity to thank Weta FX, DNEG, RISE, Distillery VFX, Storm Studios, Important Looking Pirates, Blackbird, Wylie Co., RVX, and VDK. We also had ILM for concept art and Digital Domain for previs. Fiona Campbell Westgate // Alex Wang and I were very aware of the tight delivery schedule, which added to the challenge of distributing the workload. We planned the work based on the individual studio’s capabilities, and tried not to burden them with back to back episodes wherever possible. Fortunately, there was shorthand with vendors from Season One, who were well-acquainted with the process and the quality of work the show required. The town of Jackson is a key location in The Last of Us. Could you explain how you approached creating and expanding this environment for the second season? Alex Wang // Since Season 1, this show has created incredible sets. However, the Jackson town set build is by far the most impressive in terms of scope. They constructed an 822 ft x 400 ft set in Minaty Bay that resembled a real town! I had early discussions with Production Designer Don MacAulay and his team about where they should concentrate their efforts and where VFX would make the most sense to take over. They focused on developing the town’s main street, where we believed most scenes would occur. There is a big reveal of Jackson in the first episode after Ellie comes out of the barn. Distillery VFX was responsible for the town’s extension, which appears seamless because the team took great pride in researching and ensuring the architecture aligned with the set while staying true to the tone of Jackson, Wyoming. Fiona Campbell Westgate // An impressive set was constructed in Minaty Bay, which served as the foundation for VFX to build upon. There is a beautiful establishing shot of Jackson in Episode 1 that was completed by Distillery, showing a safe and almost normal setting as Season Two starts. Across the episodes, Jackson set extensions were completed by our partners at RISE and Weta. Each had a different phase of Jackson to create, from almost idyllic to a town immersed in Battle.  What challenges did you face filming Jackson on both real and virtual sets? Was there a particular fusion between visual effects and live-action shots to make it feel realistic? Alex Wang // I always advocate for building exterior sets outdoors to take advantage of natural light. However, the drawback is that we cannot control the weather and lighting when filming over several days across two units. In Episode 2, there’s supposed to be a winter storm in Jackson, so maintaining consistency within the episode was essential. On sunny and rainy days, we used cranes to lift large 30x60ft screens to block the sun or rain. It was impossible to shield the entire set from the rain or sun, so we prioritized protecting the actors from sunlight or rain. Thus, you can imagine there was extensive weather cleanup for the episode to ensure consistency within the sequences. Fiona Campbell Westgate // We were fortunate that production built a large scale Jackson set. It provided a base for the full CG Jackson aerial shots and CG Set Extensions. The weather conditions at Minaty Bay presented a challenge during the filming of the end of the Battle sequence in Episode 2. While there were periods of bright sunshine, rainfall occurred during the filming of the end of the Battle sequence in Episode 2. In addition to the obvious visual effects work, it became necessary to replace the ground cover. Photograph by Liane Hentscher/HBO The attack on Jackson by the horde of infected in season 2 is a very intense moment. How did you approach the visual effects for this sequence? What techniques did you use to make the scale of the attack feel as impressive as it did? Alex Wang // We knew this would be a very complex sequence to shoot, and for it to be successful, we needed to start planning with the HODs from the very beginning. We began previs during prep with Weta FX and the episode’s director, Mark Mylod. The previs helped us understand Mark and the showrunner’s vision. This then served as a blueprint for all departments to follow, and in many instances, we filmed the previs. Fiona Campbell Westgate // The sheer size of the CG Infected Horde sets the tone for the scale of the Battle. It’s an intimidating moment when they are revealed through the blowing snow. The addition of CG explosions and atmospheric effects contributed in adding scale to the sequence.  Can you give us an insight into the technical challenges of capturing the infected horde? How much of the effect was done using CGI, and how much was achieved with practical effects? Alex Wang // Starting with a detailed previs that Mark and Craig approved was essential for planning the horde. We understood that we would never have enough stunt performers to fill a horde, nor could they carry out some stunts that would be too dangerous. I reviewed the previs with Stunt Coordinator Marny Eng numerous times to decide the best placements for her team’s stunt performers. We also collaborated with Barrie Gower from the Prosthetics team to determine the most effective allocation of his team’s efforts. Stunt performers positioned closest to the camera would receive the full prosthetic treatment, which can take hours. Weta FX was responsible for the incredible CG Infected horde work in the Jackson Battle. They have been a creative partner with HBO’s The Last of Us since Season 1, so they were brought on early for Season 2. I began discussions with Weta’s VFX supervisor, Nick Epstein, about how we could tackle these complex horde shots very early during the shoot. Typically, repetition in CG crowd scenes can be acceptable, such as armies with soldiers dressed in the same uniform or armour. However, for our Infected horde, Craig wanted to convey that the Infected didn’t come off an assembly line or all shop at the same clothing department store. Any repetition would feel artificial. These Infected were once civilians with families, or they were groups of raiders. We needed complex variations in height, body size, age, clothing, and hair. We built our base library of Infected, and then Nick and the Weta FX team developed a “mix and match” system, allowing the Infected to wear any costume and hair groom. A procedural texturing system was also developed for costumes, providing even greater variation. The most crucial aspect of the Infected horde was their motion. We had numerous shots cutting back-to-back with practical Infected, as well as shots where our CG Infected ran right alongside a stunt horde. It was incredibly unforgiving! Weta FX’s animation supervisor from Season 1, Dennis Yoo, returned for Season 2 to meet the challenge. Having been part of the first season, Dennis understood the expectations of Craig and Neil. Similar to issues of model repetition within a horde, it was relatively easy to perceive repetition, especially if they were running toward the same target. It was essential to enhance the details of their performances with nuances such as tripping and falling, getting back up, and trampling over each other. There also needed to be a difference in the Infected’s running speed. To ensure we had enough complexity within the horde, Dennis motion-captured almost 600 unique motion cycles. We had over a hundred shots in episode 2 that required CG Infected horde. Fiona Campbell Westgate // Nick Epstein, Weta VFX Supervisor, and Dennis Yoo, Weta Animation Supervisor, were faced with having to add hero, close-up Horde that had to integrate with practical Stunt performers. They achieved this through over 60 motion capture sessions and running it through a deformation system they developed. Every detail was applied to allow for a seamless blend with our practical Stunt performances. The Weta team created a custom costume and hair system that provided individual looks to the CG Infected Horde. We were able to avoid the repetitive look of a CG crowd due to these efforts. The movement of the infected horde is crucial for the intensity of the scene. How did you manage the animation and simulation of the infected to ensure smooth and realistic interaction with the environment? Fiona Campbell Westgate // We worked closely with the Stunt department to plan out positioning and where VFX would be adding the CG Horde. Craig Mazin wanted the Infected Horde to move in a way that humans cannot. The deformation system kept the body shape anatomically correct and allowed us to push the limits from how a human physically moves.  The Bloater makes a terrifying return this season. What were the key challenges in designing and animating this creature? How did you work on the Bloater’s interaction with the environment and other characters? Alex Wang // In Season 1, the Kansas City cul-de-sac sequence featured only a handful of Bloater shots. This season, however, nearly forty shots showcase the Bloater in broad daylight during the Battle of Jackson. We needed to redesign the Bloater asset to ensure it looked good in close-up shots from head to toe. Weta FX designed the Bloater for Season 1 and revamped the design for this season. Starting with the Bloater’s silhouette, it had to appear large, intimidating, and menacing. We explored enlarging the cordyceps head shape to make it feel almost like a crown, enhancing the Bloater’s impressive and strong presence. During filming, a stunt double stood in for the Bloater. This was mainly for scale reference and composition. It also helped the Infected stunt performers understand the Bloater’s spatial position, allowing them to avoid running through his space. Once we had an edit, Dennis mocapped the Bloater’s performances with his team. It is always challenging to get the motion right for a creature that weighs 600 pounds. We don’t want the mocap to be overly exaggerated, but it does break the character if the Bloater feels too “light.” The brilliant animation team at Weta FX brought the Bloater character to life and nailed it! When Tommy goes head-to-head with the Bloater, Craig was quite specific during the prep days about how the Bloater would bubble, melt, and burn as Tommy torches him with the flamethrower. Important Looking Pirates took on the “Burning Bloater” sequence, led by VFX Supervisor Philip Engstrom. They began with extensive R&D to ensure the Bloater’s skin would start to bubble and burn. ILP took the final Bloater asset from Weta FX and had to resculpt and texture the asset for the Bloater’s final burn state. Craig felt it was important for the Bloater to appear maimed at the end. The layers of FX were so complex that the R&D continued almost to the end of the delivery schedule. Fiona Campbell Westgate // This season the Bloater had to be bigger, more intimidating. The CG Asset was recreated to withstand the scrutiny of close ups and in daylight. Both Craig Mazin and Neil Druckmann worked closely with us during the process of the build. We referenced the game and applied elements of that version with ours. You’ll notice that his head is in the shape of crown, this is to convey he’s a powerful force.  During the Burning Bloater sequence in Episode 2, we brainstormed with Philip Engström, ILP VFX Supervisor, on how this creature would react to the flamethrower and how it would affect the ground as it burns. When the Bloater finally falls to the ground and dies, the extraordinary detail of the embers burning, fluid draining and melting the surrounding snow really sells that the CG creature was in the terrain.  Given the Bloater’s imposing size, how did you approach its integration into scenes with the actors? What techniques did you use to create such a realistic and menacing appearance? Fiona Campbell Westgate // For the Bloater, a stunt performer wearing a motion capture suit was filmed on set. This provided interaction with the actors and the environment. VFX enhanced the intensity of his movements, incorporating simulations to the CG Bloater’s skin and muscles that would reflect the weight and force as this terrifying creature moves.  Seattle in The Last of Us is a completely devastated city. Can you talk about how you recreated this destruction? What were the most difficult visual aspects to realize for this post-apocalyptic city? Fiona Campbell Westgate // We were meticulous in blending the CG destruction with the practical environment. The flora’s ability to overtake the environment had to be believable, and we adhered to the principle of form follows function. Due to the vastness of the CG devastation it was crucial to avoid repetitive effects. Consequently, our vendors were tasked with creating bespoke designs that evoked a sense of awe and beauty. Was Seattle’s architecture a key element in how you designed the visual effects? How did you adapt the city’s real-life urban landscape to meet the needs of the story while maintaining a coherent aesthetic? Alex Wang // It’s always important to Craig and Neil that we remain true to the cities our characters are in. DNEG was one of our primary vendors for Boston in Season 1, so it was natural for them to return for Season 2, this time focusing on Seattle. DNEG’s VFX Supervisor, Stephen James, who played a crucial role in developing the visual language of Boston for Season 1, also returns for this season. Stephen and Melaina Maceled a team to Seattle to shoot plates and perform lidar scans of parts of the city. We identified the buildings unique to Seattle that would have existed in 2003, so we ensured these buildings were always included in our establishing shots. Overgrowth and destruction have significantly influenced the environments in The Last of Us. The environment functions almost as a character in both Season 1 and Season 2. In the last season, the building destruction in Boston was primarily caused by military bombings. During this season, destruction mainly arises from dilapidation. Living in the Pacific Northwest, I understand how damp it can get for most of the year. I imagined that, over 20 years, the integrity of the buildings would be compromised by natural forces. This abundant moisture creates an exceptionally lush and vibrant landscape for much of the year. Therefore, when designing Seattle, we ensured that the destruction and overgrowth appeared intentional and aesthetically distinct from those of Boston. Fiona Campbell Westgate // Led by Stephen James, DNEG VFX Supervisor, and Melaina Mace, DNEG DFX Supervisor, the team captured photography, drone footage and the Clear Angle team captured LiDAR data over a three-day period in Seattle. It was crucial to include recognizable Seattle landmarks that would resonate with people familiar with the game.  The devastated city almost becomes a character in itself this season. What aspects of the visual effects did you have to enhance to increase the immersion of the viewer into this hostile and deteriorated environment? Fiona Campbell Westgate // It is indeed a character. Craig wanted it to be deteriorated but to have moments where it’s also beautiful in its devastation. For instance, in the Music Store in Episode 4 where Ellie is playing guitar for Dina, the deteriorated interior provides a beautiful backdrop to this intimate moment. The Set Decorating team dressed a specific section of the set, while VFX extended the destruction and overgrowth to encompass the entire environment, immersing the viewer in strange yet familiar surroundings. Photograph by Liane Hentscher/HBO The sequence where Ellie navigates a boat through a violent storm is stunning. What were the key challenges in creating this scene, especially with water simulation and the storm’s effects? Alex Wang // In the concluding episode of Season 2, Ellie is deep in Seattle, searching for Abby. The episode draws us closer to the Aquarium, where this area of Seattle is heavily flooded. Naturally, this brings challenges with CG water. In the scene where Ellie encounters Isaac and the W.L.F soldiers by the dock, we had a complex shoot involving multiple locations, including a water tank and a boat gimbal. There were also several full CG shots. For Isaac’s riverine boat, which was in a stormy ocean, I felt it was essential that the boat and the actors were given the appropriate motion. Weta FX assisted with tech-vis for all the boat gimbal work. We began with different ocean wave sizes caused by the storm, and once the filmmakers selected one, the boat’s motion in the tech-vis fed the special FX gimbal. When Ellie gets into the Jon boat, I didn’t want it on the same gimbal because I felt it would be too mechanical. Ellie’s weight needed to affect the boat as she got in, and that wouldn’t have happened with a mechanical gimbal. So, we opted to have her boat in a water tank for this scene. Special FX had wave makers that provided the boat with the appropriate movement. Instead of guessing what the ocean sim for the riverine boat should be, the tech- vis data enabled DNEG to get a head start on the water simulations in post-production. Craig wanted this sequence to appear convincingly dark, much like it looks out on the ocean at night. This allowed us to create dramatic visuals, using lightning strikes at moments to reveal depth. Were there any memorable moments or scenes from the series that you found particularly rewarding or challenging to work on from a visual effects standpoint? Alex Wang // The Last of Us tells the story of our characters’ journey. If you look at how season 2 begins in Jackson, it differs significantly from how we conclude the season in Seattle. We seldom return to the exact location in each episode, meaning every episode presents a unique challenge. The scope of work this season has been incredibly rewarding. We burned a Bloater, and we also introduced spores this season! Photograph by Liane Hentscher/HBO Looking back on the project, what aspects of the visual effects are you most proud of? Alex Wang // The Jackson Battle was incredibly complex, involving a grueling and lengthy shoot in quite challenging conditions, along with over 600 VFX shots in episode 2. It was truly inspiring to witness the determination of every department and vendor to give their all and create something remarkable. Fiona Campbell Westgate // I am immensely proud of the exceptional work accomplished by all of our vendors. During the VFX reviews, I found myself clapping with delight when the final shots were displayed; it was exciting to see remarkable results of the artists’ efforts come to light.  How long have you worked on this show? Alex Wang // I’ve been on this season for nearly two years. Fiona Campbell Westgate // A little over one year; I joined the show in April 2024. What’s the VFX shots count? Alex Wang // We had just over 2,500 shots this Season. Fiona Campbell Westgate // In Season 2, there were a total of 2656 visual effects shots. What is your next project? Fiona Campbell Westgate // Stay tuned… A big thanks for your time. WANT TO KNOW MORE?Blackbird: Dedicated page about The Last of Us – Season 2 website.DNEG: Dedicated page about The Last of Us – Season 2 on DNEG website.Important Looking Pirates: Dedicated page about The Last of Us – Season 2 website.RISE: Dedicated page about The Last of Us – Season 2 website.Weta FX: Dedicated page about The Last of Us – Season 2 website. © Vincent Frei – The Art of VFX – 2025 #last #season #alex #wang #production

Designing a girly bedroom is about so much more than picking a pretty color. It’s about creating a space that reflects personality, inspires creativity, and feels like a true escape, whether it’s for a little girl, a growing tween, or a style-loving teen. From playful wallpaper tricks to smart storage ideas and cozy reading nooks, the right design choices can turn a simple bedroom into something magical and meaningful. In this guide, we’re skipping over-the-top themes and diving into real, creative design tips that anyone can use. Whether you’re decorating from scratch or giving an existing space a fresh update, these 15 girly bedroom ideas will help you build a room that’s both beautiful and completely personal. Let’s get into the ideas that make a room not just look pretty,but feel like home. 1. Master the Mix-and-Match Look Image Source: House Beautiful Mixing and matching styles, textures, and prints can create a beautifully curated bedroom full of personality. Instead of sticking to one look, combine modern and vintage pieces or pair graphic prints with soft florals. You might match a velvet headboard with rattan nightstands, or polka dot bedding with a plaid throw.  The key is consistency in your color palette,stick to 2–3 dominant hues to make the mix feel intentional. Balance is essential: if you’re using a bold pattern on the bed, keep the walls subtle. This technique creates a room that feels playful, personal, and effortlessly stylish. 2. Be Creative with Wallpaper Image Source: Ghayda Nsour Wallpaper can completely transform a room,but don’t stop at the walls! Use it behind shelves, inside closets, on the ceiling, or even on drawer fronts. Choose designs that reflect your personality, like watercolor florals, animal prints, or dreamy clouds. For a modern look, try graphic shapes in soft pastels. Use peel-and-stick wallpaper if you’re renting or want a low-commitment option. Mix one bold feature wall with neutral paint elsewhere to keep the space grounded. Wallpaper isn’t just background,it’s a design statement that can define the whole vibe of the room. 3. Create a Magical Reading Nook Image Source: House Beautiful A cozy, magical reading nook makes a bedroom feel like a retreat. Pick a quiet corner by the window or even under a loft bed. Add a plush bean bag, floor cushions, or a hanging chair. Use soft lighting,think fairy lights or a mushroom-shaped lamp,and layer in blankets and pillows.  Install a small bookshelf or floating ledges for easy access to books. Add a canopy or sheer curtain for privacy and charm. This tiny space becomes a personal hideaway, perfect for getting lost in a book or daydreaming in comfort. 4. Keep Things Crisp with White and Neutrals Image Source: House Beautiful A white or neutral color scheme is timeless, clean, and chic. Use white walls as a canvas, then layer in soft greys, taupes, or blush accents for warmth. Choose bedding with subtle embroidery or ruffles, and use natural textures like linen, cotton, and jute to add depth.  Light-colored wood furniture adds to the serene vibe. This look works beautifully in both small and large spaces, as it keeps everything bright and airy. Add interest with small pops of color,like a lavender throw or gold-accented lamp,to keep it from feeling too sterile. 5. Design a Fairy Tale Hideaway Image Source: House Beautiful Bring fairy tale magic to life with soft, whimsical touches. Start with pastel or dusty-tone paint,think lilac, blush, or icy blue. Add a canopy over the bed with tulle or lace, and incorporate soft lighting like fairy lights or a tiny chandelier. Choose furniture with elegant curves, like a vintage-inspired vanity or a carved wood headboard.  Add elements like star-shaped pillows, storybook art prints, or a tiny dress-up corner. This style isn’t just for little girls,it can be adapted for any age with the right balance of enchantment and elegance. 6. Try an Unexpected Color Scheme Image Source: House Beautiful Go beyond typical “girly” colors and experiment with fresh combinations. Try pairing emerald green with blush pink, or mustard yellow with lavender. Using non-traditional combos instantly modernizes the space.  To keep it cohesive, let one color dominate while the other plays a supporting role. You can also anchor the palette with neutral base tones like white, grey, or wood textures. Use the fun color in accessories, pillows, rugs, art, and let the secondary color pop through bedding or an accent wall. This bold choice makes the room stand out and feel grown-up and creative. 7. Make a Statement with an Accent Wall Image Source: Samar Gamal A bold accent wall can completely elevate a girly bedroom without overwhelming the space. To create a showstopping backdrop, choose a rich color, velvet paneling, or wallpaper with texture or pattern. Framing the wall with architectural elements—like arches or built-in lighting, adds even more drama and depth. This technique works beautifully behind the bed, transforming it into a focal point. Keep the surrounding walls neutral so the accent shines, and tie the rest of the room’s palette into the wall’s tones through bedding, curtains, or rugs. Whether soft or striking, an accent wall sets the tone for the entire space. 8. Create a Personalized Gallery Wall Image Source: Samira Mahmudlu Turn a blank wall into a living collage of favorite things. Mix framed art prints, personal photos, inspirational quotes, and even fabric swatches or pressed flowers. Use a variety of frame shapes and sizes for an eclectic look, or keep them uniform for a cleaner style. Arrange everything on the floor first to find the perfect layout before you hang. This gallery wall becomes a rotating story of who she is,what she loves, what inspires her, and where she dreams of going. It’s an easy way to update the space regularly. 9. Add a Canopy or Curtain Accent Image Source: House Beautiful Canopies aren’t just for beds, use soft, sheer curtains to frame a reading corner, a vanity, or even an entire wall. Install ceiling hooks or curtain rods to drape the fabric, and layer with twinkle lights for added charm. Choose materials like tulle, gauze, or voile in light pastel tones to keep things dreamy. This instantly gives the room a soft, cozy vibe and creates that “fairy tale” feel without going over the top. 10. Make Storage Beautiful and Practical Image Source: House Beautiful Smart storage is essential, but it can also be part of the decor. Use decorative bins in woven, velvet, or metallic finishes. Floating wall cubes can hold books, plants, or collectibles.  Opt for under-bed storage drawers or a bed frame with built-in shelves. A cute coat rack, jewelry organizer, or peg rail keeps accessories tidy and stylish. When everything has its place, the room feels more peaceful and easier to enjoy. 11. Embrace Pink as a Primary Design Element Don’t just use pink as an accent, let it lead the entire design. Choose a range of tones like blush, rose, and dusty mauve, then layer them throughout the space: on walls, bedding, furniture, and décor. Vary the textures to prevent the room from feeling flat, think velvet upholstery, cotton bedding, matte finishes, and metallic accents.  Pair your pinks with soft neutrals like white, beige, or light wood to balance the color and keep the room light and breathable. Pink doesn’t have to be overly sweet; with the right shades and balance, it feels calm, modern, and elegant. This approach works beautifully for girls’ rooms that want to lean feminine without feeling too “theme-y.” 12. Use Architectural Curves and Built-In Shapes Image Source: Kaiwan Hamza Incorporating soft curves in your design instantly adds charm and sophistication. Instead of standard square furniture and sharp lines, opt for arched wall cutouts, rounded shelves, circular reading nooks, and oval mirrors. You can mimic architectural curves through painted arches, custom cabinetry, or even curved headboards.  These shapes soften the room’s feel and make it visually unique. For a truly cohesive look, repeat the curve motif across several areas, window treatments, lighting, or even rugs. This technique is especially powerful when paired with soft colors and layered textures, as it creates a space that feels whimsical yet mature. 13. Stick to the Classics Image Source: Sara Al Refai There’s a reason some design elements never go out of style,they work. Sticking to the classics means using timeless materials, shapes, and palettes that grow with the child. Think white furniture, soft pink or lavender walls, floral bedding, and elegant drapery.  Go for a tufted headboard, framed artwork, and crystal-inspired lighting for a touch of sophistication. These pieces can be updated with accessories as tastes change, but the core elements remain versatile and stylish. This approach also helps future-proof the room, saving time and money on constant redecoration. If you’re unsure where to start, lean into a classic French or vintage-inspired style, delicate moldings, soft patterns, and warm lighting are always a win. 14. Design with Symmetry for a Polished Look Image Source: Menna Hussien Symmetry creates balance, calm, and a naturally pleasing layout, especially in shared bedrooms. This image is a perfect example: identical beds, mirrored bedding, and a centered nightstand create harmony and order. To use this concept in a girly bedroom, start by repeating core pieces on each side, beds, lamps, pillows, or wall sconces.  Choose neutral tones like beige, blush, or ivory to maintain a serene vibe. You can also mirror wall decor or shelving to extend the symmetry across the space. It doesn’t need to be exact, balance can come from visual weight, not just identical pieces. This method works particularly well for siblings, guest rooms, or for a clean and elegant design that feels effortlessly organized. 15. Design a Minimalistic Girly Bedroom Image Source: Miral Tarek Minimal doesn’t mean boring, it means intentional. A minimal girly bedroom uses clean lines, soft pastels, and refined details to create a calm, elevated space. Stick to a restrained color palette like blush and powder blue, then let furniture and texture do the talking. Choose sleek pieces: a tufted headboard, elegant side tables, and delicate lighting. Avoid clutter by limiting accessories and keeping surfaces clean. One or two standout piecesadd character without overloading the room. The result is peaceful, polished, and perfect for a girl who prefers subtle over sparkly. Finishing Notes Designing a girly bedroom isn’t about following trends or sticking to one color—it’s about creating a space that reflects personality, sparks imagination, and grows with time. Whether you’re planning a soft pastel retreat, a bold and modern haven, or something whimsical in between, the ideas shared here are meant to inspire creativity and confidence in your design choices. At Home Designing, we believe that every corner of a home, especially a child’s bedroom, should be both beautiful and functional. Our mission is to help you transform everyday spaces into something extraordinary through smart layouts, thoughtful details, and timeless inspiration. #dreamy #girly #bedroom #ideas #youll

Imagine a world where your USB-C cable works seamlessly across all devices—no more guessing which port has which capabilities! Microsoft is championing a universal USB-C standard that would eliminate the frustrating inconsistencies we've all faced with different PCs. This initiative could revolutionize the way we connect our devices, making tech life simpler and more efficient. As a Machine Learning Specialist, I see a parallel with the push for interoperability in AI systems—just like we crave uniformity in hardware, we desire it in software too. What’s your experience with USB-C? Have you ever been caught off guard by its varying functionalities? Let’s discuss! #USBC #TechInnovation #Microsoft #Interoperability #MachineLearning

If it seems like every tech company is trying shove AI into all of their products and services, that's because they are. And as someone who rarelyuses AI, it's a lot: I don't need AI to write my emails, nor do I want it to generate realistic videos that might trick viewers into thinking they're human-made. I certainly don't need it to serve up incorrect information when I try to search the internet.But Firefox's latest AI feature seems genuinely useful, likely because it isn't "making" anything for me. Instead its new AI-powered link previews simply show a small summary of the content on a webpage hidden behind a URL, so you'll have a better idea whether or not it's worth clicking on. Mozilla first announced these AI-generated link previews last month, before rolling them out as part of Firefox 139. The feature is currently in the "experimental" phase, and Mozilla is open to user feedback on how to adjust it. Here's how it works in its current iteration: When you hover your cursor over a URL and hit the corresponding keyboard shortcut, Firefox retrieves and analyzes the webpage's HTML without actually loading the page. It then looks for metadata that can help inform the page's title, description, and cover image. Once it has the data it needs, it displays whatever it has pulled up in a pop-out window.Like what you see? Go ahead and click through to see the full page. Not what you're looking for? Move on to the next link. Assuming the summaries are accurate, I can actually see this being something I rely on to give me an idea of whether or not a particular link is relevant to my current query—especially once Mozilla irons out some of the bugs. How to test out Firefox's AI-generated link previewsIn order to try AI link previews for yourself, you need to be running Firefox 139.That accomplished, head back to Settings, then select Firefox Labs. Under "Customize your browsing," click the checkmark next to "Link previews." Credit: Lifehacker Now, open any website, hover over any link on your screen, and hit Shift + Altor Shift + Option. A small pop-up window should open immediately, along with the webpage's title and a brief description. Soon, you should also see the cover image for the page, then, after a few moments, Firefox will generate the page's "Key points." Credit: Lifehacker Are Firefox's AI link previews worth using?So far, the feature has been a bit hit-or-miss for me. Sometimes the key points it offers up are three well-summarized takeaways from the article. Other times, they are quotes lifted straight out of the article. Plagiarism aside, it's tough to get a sense of the scope of an article if the "key points" are just listing the first few ideas in the text. I suspect part of the problem is that what the AI sees as most important will vary based on how each site is configured: I found the previews frequently copied the text on Lifehacker articles verbatim, for example, while summarizing articles found on other sites. Again, this feature is in development, so Mozilla may need to figure out how to accommodate the variations in in websites design to make it uniformly useful. But as AI features go, I don't hate it, and in 2025, that's saying something. #firefoxs #new #link #previews #are

How Deepfakes Are Created Generative AI models enable the creation of highly realistic fake media. Most deepfakes today are produced by training deep neural networks on real images, video or audio of a target person. The two predominant AI architectures are generative adversarial networksand autoencoders. A GAN consists of a generator network that produces synthetic images and a discriminator network that tries to distinguish fakes from real data. Through iterative training, the generator learns to produce outputs that increasingly fool the discriminator¹. Autoencoder-based tools similarly learn to encode a target face and then decode it onto a source video. In practice, deepfake creators use accessible software: open-source tools like DeepFaceLab and FaceSwap dominate video face-swapping². Voice-cloning toolscan mimic a person’s speech from minutes of audio. Commercial platforms like Synthesia allow text-to-video avatars, which have already been misused in disinformation campaigns³. Even mobile appslet users do basic face swaps in minutes⁴. In short, advances in GANs and related models make deepfakes cheaper and easier to generate than ever. Diagram of a generative adversarial network: A generator network creates fake images from random input and a discriminator network distinguishes fakes from real examples. Over time the generator improves until its outputs “fool” the discriminator⁵ During creation, a deepfake algorithm is typically trained on a large dataset of real images or audio from the target. The more varied and high-quality the training data, the more realistic the deepfake. The output often then undergoes post-processingto enhance believability¹. Technical defenses focus on two fronts: detection and authentication. Detection uses AI models to spot inconsistenciesthat betray a synthetic origin⁵. Authentication embeds markers before dissemination – for example, invisible watermarks or cryptographically signed metadata indicating authenticity⁶. The EU AI Act will soon mandate that major AI content providers embed machine-readable “watermark” signals in synthetic media⁷. However, as GAO notes, detection is an arms race – even a marked deepfake can sometimes evade notice – and labels alone don’t stop false narratives from spreading⁸⁹. Deepfakes in Recent Elections: Examples Deepfakes and AI-generated imagery already have made headlines in election cycles around the world. In the 2024 U.S. primary season, a digitally-altered audio robocall mimicked President Biden’s voice urging Democrats not to vote in the New Hampshire primary. The callerwas later fined million by the FCC and indicted under existing telemarketing laws¹⁰¹¹.Also in 2024, former President Trump posted on social media a collage implying that pop singer Taylor Swift endorsed his campaign, using AI-generated images of Swift in “Swifties for Trump” shirts¹². The posts sparked media uproar, though analysts noted the same effect could have been achieved without AI¹². Similarly, Elon Musk’s X platform carried AI-generated clips, including a parody “Ad” depicting Vice-President Harris’s voice via an AI clone¹³. Beyond the U.S., deepfake-like content has appeared globally. In Indonesia’s 2024 presidential election, a video surfaced on social media in which a convincingly generated image of the late President Suharto appeared to endorse the candidate of the Golkar Party. Days later, the endorsed candidatewon the presidency¹⁴. In Bangladesh, a viral deepfake video superimposed the face of opposition leader Rumeen Farhana onto a bikini-clad body – an incendiary fabrication designed to discredit her in the conservative Muslim-majority society¹⁵. Moldova’s pro-Western President Maia Sandu has been repeatedly targeted by AI-driven disinformation; one deepfake video falsely showed her resigning and endorsing a Russian-friendly party, apparently to sow distrust in the electoral process¹⁶. Even in Taiwan, a TikTok clip circulated that synthetically portrayed a U.S. politician making foreign-policy statements – stoking confusion ahead of Taiwanese elections¹⁷. In Slovakia’s recent campaign, AI-generated audio mimicking the liberal party leader suggested he plotted vote-rigging and beer-price hikes – instantly spreading on social media just days before the election¹⁸. These examples show that deepfakes have touched diverse polities, often aiming to undermine candidates or confuse voters¹⁵¹⁸. Notably, many of the most viral “deepfakes” in 2024 were actually circulated as obvious memes or claims, rather than subtle deceptions. Experts observed that outright undetectable AI deepfakes were relatively rare; more common were AI-generated memes plainly shared by partisans, or cheaply doctored “cheapfakes” made with basic editing tools¹³¹⁹. For instance, social media was awash with memes of Kamala Harris in Soviet garb or of Black Americans holding Trump signs¹³, but these were typically used satirically, not meant to be secretly believed. Nonetheless, even unsophisticated fakes can sway opinion: a U.S. study found that false presidential adsdid change voter attitudes in swing states. In sum, deepfakes are a real and growing phenomenon in election campaigns²⁰²¹ worldwide – a trend taken seriously by voters and regulators alike. U.S. Legal Framework and Accountability In the U.S., deepfake creators and distributors of election misinformation face a patchwork of tools, but no single comprehensive federal “deepfake law.” Existing laws relevant to disinformation include statutes against impersonating government officials, electioneering, and targeted statutes like criminal electioneering communications. In some cases ordinary laws have been stretched: the NH robocall used the Telephone Consumer Protection Act and mail/telemarketing fraud provisions, resulting in the M fine and a criminal charge. Similarly, voice impostors can potentially violate laws against “false advertising” or “unlawful corporate communications.” However, these laws were enacted before AI, and litigators have warned they often do not fit neatly. For example, deceptive deepfake claims not tied to a specific victim do not easily fit into defamation or privacy torts. Voter intimidation lawsalso leave a gap for non-threatening falsehoods about voting logistics or endorsements. Recognizing these gaps, some courts and agencies are invoking other theories. The U.S. Department of Justice has recently charged individuals under broad fraud statutes, and state attorneys general have considered deepfake misinformation as interference with voting rights. Notably, the Federal Election Commissionis preparing to enforce new rules: in April 2024 it issued an advisory opinion limiting “non-candidate electioneering communications” that use falsified media, effectively requiring that political ads use only real images of the candidate. If finalized, that would make it unlawful for campaigns to pay for ads depicting a candidate saying things they never did. Similarly, the Federal Trade Commissionand Department of Justicehave signaled that purely commercial deepfakes could violate consumer protection or election laws. U.S. Legislation and Proposals Federal lawmakers have proposed new statutes. The DEEPFAKES Accountability Actwould, among other things, impose a disclosure requirement: political ads featuring a manipulated media likeness would need clear disclaimers identifying the content as synthetic. It also increases penalties for producing false election videos or audio intended to influence the vote. While not yet enacted, supporters argue it would provide a uniform rule for all federal and state campaigns. The Brennan Center supports transparency requirements over outright bans, suggesting laws should narrowly target deceptive deepfakes in paid ads or certain categorieswhile carving out parody and news coverage. At the state level, over 20 states have passed deepfake laws specifically for elections. For example, Florida and California forbid distributing falsified audio/visual media of candidates with intent to deceive voters. Some statesdefine “deepfake” in statutes and allow candidates to sue or revoke candidacies of violators. These measures have had mixed success: courts have struck down overly broad provisions that acted as prior restraints. Critically, these state laws raise First Amendment issues: political speech is highly protected, so any restriction must be tightly tailored. Already, Texas and Virginia statutes are under legal review, and Elon Musk’s company has sued under California’s lawas unconstitutional. In practice, most lawsuits have so far centered on defamation or intellectual property, rather than election-focused statutes. Policy Recommendations: Balancing Integrity and Speech Given the rapidly evolving technology, experts recommend a multi-pronged approach. Most stress transparency and disclosure as core principles. For example, the Brennan Center urges requiring any political communication that uses AI-synthesized images or voice to include a clear label. This could be a digital watermark or a visible disclaimer. Transparency has two advantages: it forces campaigns and platforms to “own” the use of AI, and it alerts audiences to treat the content with skepticism. Outright bans on all deepfakes would likely violate free speech, but targeted bans on specific harmsmay be defensible. Indeed, Florida already penalizes misuse of recordings in voter suppression. Another recommendation is limited liability: tying penalties to demonstrable intent to mislead, not to the mere act of content creation. Both U.S. federal proposals and EU law generally condition fines on the “appearance of fraud” or deception. Technical solutions can complement laws. Watermarking original mediacould deter the reuse of authentic images in doctored fakes. Open tools for deepfake detection – some supported by government research grants – should be deployed by fact-checkers and social platforms. Making detection datasets publicly availablehelps improve AI models to spot fakes. International cooperation is also urged: cross-border agreements on information-sharing could help trace and halt disinformation campaigns. The G7 and APEC have all recently committed to fighting election interference via AI, which may lead to joint norms or rapid response teams. Ultimately, many analysts believe the strongest “cure” is a well-informed public: education campaigns to teach voters to question sensational media, and a robust independent press to debunk falsehoods swiftly. While the law can penalize the worst offenders, awareness and resilience in the electorate are crucial buffers against influence operations. As Georgia Tech’s Sean Parker quipped in 2019, “the real question is not if deepfakes will influence elections, but who will be empowered by the first effective one.” Thus policies should aim to deter malicious use without unduly chilling innovation or satire. References: /. /. . . . . . . . /. . . /. /. . The post The Legal Accountability of AI-Generated Deepfakes in Election Misinformation appeared first on MarkTechPost. #legal #accountability #aigenerated #deepfakes #election

Smart speakers have swiftly transitioned from futuristic gadgets to indispensable components of the modern home. Their convenience is undeniable, offering voice-controlled access to information, entertainment, and smart home functions. However, when it comes to their visual appeal, the majority of manufacturers tend to adhere to a rather uniform aesthetic. We’re often presented with devices clad in neutral-toned meshes and grills, prioritizing a minimalist design intended to blend seamlessly into any environment. While this understated approach can be appreciated for its subtlety, it often leaves those with a penchant for more expressive decor wanting. Tokyo-based Metal Goat Studio has come up with a smart speaker holder called Kogani. Basically, it looks like a crab that is seemingly formed out of origami and its main function is to house smart speakers and add a bit of style to your space. It is compatible with devices like Google Nest Mini, Echo Dot, and the HomePod Mini. It’s part of the brand’s Capsule Animals series, which is a line of interior elements that are integrated with smart technologies but uses compact geometries, zoomorphic references. Designer: Metal Goat Studio Kogani, derived from the Japanese word for “small crab”, is more than just a holder for your small smart speaker; it’s a piece of art. Crafted in a stunning origami style, this crab-shaped stand brings a unique touch of elegance to any space. The intricate folds and lines of the origami-inspired design create a visually captivating piece that elevates the charm of your device. It is also sustainably made, using synthetic washi paper, warm brass joints, and an acrylic structure that makes your smart speaker into “an object of calm and intention.” Aside from making your smart speaker look more interesting, it of course has other functions. It is able to prevent spills or clutter buildups in your space by lifting the speaker off your surfaces. It’s also a conversation piece when people see that your speaker is anchored in this aesthetic holder. Kogani allows you to bring a touch of the artistic and unique into your home or office. Metal Goat Studio’s dedication to combining craftsmanship and innovation is evident in every fold of this exquisite speaker holder. It’s a simple yet impactful way to personalize your space and showcase your smart speaker. As they say “This crab is ready to crawl into your life — and hold your speaker with pride.” The post Origami and crab inspired speaker holder adds a simple beauty to your space first appeared on Yanko Design. #origami #crab #inspired #speaker #holder