• At last, physicists at the University of Liège have cracked the code: water landscapes created with 3D printing! Because why enjoy a simple drink when you can have a miniature ocean on your table? Forget about the days of just swimming in water; now we can marvel at the aesthetic pleasure of tiny, printed spines dancing on the surface. Who knew physics could be so… artistic? Next up, they'll probably figure out how to print clouds into our living rooms. Get ready for some very confused houseplants.

    #3DPrinting #WaterLandscapes #PhysicsArt #UniversityOfLiege #InnovativeScience
    At last, physicists at the University of Liège have cracked the code: water landscapes created with 3D printing! Because why enjoy a simple drink when you can have a miniature ocean on your table? Forget about the days of just swimming in water; now we can marvel at the aesthetic pleasure of tiny, printed spines dancing on the surface. Who knew physics could be so… artistic? Next up, they'll probably figure out how to print clouds into our living rooms. Get ready for some very confused houseplants. #3DPrinting #WaterLandscapes #PhysicsArt #UniversityOfLiege #InnovativeScience
    Físicos de la Universidad de Lieja crean paisajes líquidos gracias a la impresión 3D
    ¿Y si pudiéramos convertir el agua en un paisaje? Físicos de la Universidad de Lieja, en Bélgica, en colaboración la Universidad Brown (EE.UU.), lo han logrado. A partir de espinas milimétricas impresas en 3D, consiguieron manipular la superficie del
    1 Commenti 0 condivisioni
  • Well, folks, it’s finally happened: Microsoft has teamed up with Asus to bless us with the “ROG Xbox Ally range” — yes, that’s right, the first Xbox handhelds have arrived! Because clearly, we were all just waiting for the day when we could play Halo on a device that fits in our pockets. Who needs a console at home when you can have a mini Xbox that can barely fit alongside your keys and loose change?

    Let’s take a moment to appreciate the sheer brilliance of this innovation. After years of gaming on a screen that’s bigger than your average coffee table, now you can squint at a miniature version of the Xbox screen while sitting on the bus. Who needs comfort and relaxation when you can sacrifice your eyesight for the sake of portability? Forget about the stress of lugging around your gaming setup; now you can just carry a glorified remote control!

    And how about that collaboration with Asus? Because when I think of epic gaming experiences, I definitely think of a partnership that sounds like it was cooked up in a boardroom over a cold cup of coffee. “What if we took the weight of a console and squeezed it into a device that feels like a brick?” Genius! The name “ROG Xbox Ally” even sounds like it was generated by an AI trying too hard to sound cool. “ROG” is obviously for “Really Over-the-Top Gaming,” and “Ally” is just the polite way of saying, “We’re in this mess together.”

    Let’s not overlook the fact that the last thing we needed in our lives was another device to charge. Who doesn’t love the thrill of realizing you forgot to plug in your handheld Xbox after a long day at work? Nothing screams “gaming freedom” quite like being tethered to a wall outlet while your friends are enjoying epic multiplayer sessions. Who wouldn’t want to take their gaming experience to the next level of inconvenience?

    Speaking of multiplayer, you can bet that those intense gaming sessions will be even more fun when you’re all huddled together, squinting at these tiny screens, trying to figure out how to communicate when half your friends can’t even see the action happening. It’s a whole new level of bonding, folks! “Did I just shoot you, or was that the guy on my left? Let’s argue about it while we all strain our necks to see the screen.”

    In conclusion, as we welcome the ROG Xbox Ally range into our lives, let’s take a moment to appreciate the madness of this handheld revolution. If you’ve ever dreamed of playing your favorite Xbox games on a device that feels like a high-tech paperweight, then congratulations! The future is here, and it’s as absurd as it sounds. Remember, gaming isn’t just about playing; it’s about how creatively we can inconvenience ourselves while doing so.

    #ROGXboxAlly #XboxHandheld #GamingInnovation #PortableGaming #TechHumor
    Well, folks, it’s finally happened: Microsoft has teamed up with Asus to bless us with the “ROG Xbox Ally range” — yes, that’s right, the first Xbox handhelds have arrived! Because clearly, we were all just waiting for the day when we could play Halo on a device that fits in our pockets. Who needs a console at home when you can have a mini Xbox that can barely fit alongside your keys and loose change? Let’s take a moment to appreciate the sheer brilliance of this innovation. After years of gaming on a screen that’s bigger than your average coffee table, now you can squint at a miniature version of the Xbox screen while sitting on the bus. Who needs comfort and relaxation when you can sacrifice your eyesight for the sake of portability? Forget about the stress of lugging around your gaming setup; now you can just carry a glorified remote control! And how about that collaboration with Asus? Because when I think of epic gaming experiences, I definitely think of a partnership that sounds like it was cooked up in a boardroom over a cold cup of coffee. “What if we took the weight of a console and squeezed it into a device that feels like a brick?” Genius! The name “ROG Xbox Ally” even sounds like it was generated by an AI trying too hard to sound cool. “ROG” is obviously for “Really Over-the-Top Gaming,” and “Ally” is just the polite way of saying, “We’re in this mess together.” Let’s not overlook the fact that the last thing we needed in our lives was another device to charge. Who doesn’t love the thrill of realizing you forgot to plug in your handheld Xbox after a long day at work? Nothing screams “gaming freedom” quite like being tethered to a wall outlet while your friends are enjoying epic multiplayer sessions. Who wouldn’t want to take their gaming experience to the next level of inconvenience? Speaking of multiplayer, you can bet that those intense gaming sessions will be even more fun when you’re all huddled together, squinting at these tiny screens, trying to figure out how to communicate when half your friends can’t even see the action happening. It’s a whole new level of bonding, folks! “Did I just shoot you, or was that the guy on my left? Let’s argue about it while we all strain our necks to see the screen.” In conclusion, as we welcome the ROG Xbox Ally range into our lives, let’s take a moment to appreciate the madness of this handheld revolution. If you’ve ever dreamed of playing your favorite Xbox games on a device that feels like a high-tech paperweight, then congratulations! The future is here, and it’s as absurd as it sounds. Remember, gaming isn’t just about playing; it’s about how creatively we can inconvenience ourselves while doing so. #ROGXboxAlly #XboxHandheld #GamingInnovation #PortableGaming #TechHumor
    The first Xbox handhelds have finally arrived
    The ROG Xbox Ally range has been developed by Microsoft in collaboration with Asus.
    Like
    Love
    Wow
    Sad
    Angry
    562
    1 Commenti 0 condivisioni
  • Temuera Morrison Says He's 'Sad' Not to Have Played Boba Fett Since the Divisive Disney+ show The Book of Boba Fett: 'I've Been Preserved for a Later Date'

    What’s happening with Boba Fett? The last time we saw the legendary Star Wars character was at the end of his own show, The Book of Boba Fett, in February 2022. Yes, the Disney+ spin-off series was divisive, with some Star Wars fans feeling it went too far in softening the iconic villain's character. But that can’t be it for Boba Fett, can it?Over three years later, it feels like The Book of Boba Fett Season 2 is stuck in a galaxy far, far away. Lucasfilm has given no indication that the show will return, with next year’s The Mandalorian & Grogu movie perhaps the best chance of a live-action reprisal. Will there be a The Mandalorian Season 4? Lucasfilm has yet to say, but if it does happen, perhaps Boba Fett would pop up there.In truth, the future of Boba Fett and Temuera Morrison, the actor who plays him, in the Star Wars franchise remains uncertain. And based on recent comments from Morrison himself, there is little reason to deviate from that position.PlaySpeaking in an interview with Collider to promote his new film, Ka Whawhai Tonu, the 64-year-old New Zealander said he felt "sad" not to have reprised the role since the end of The Book of Boba Fett.“WhereThe Book of Boba Fett Season 2? Where the hell is Season 2?" Morrison said. "I know they're doing Ahsoka Season 2. I'm going, 'Ah, where's my Season 2?'"According to Collider, Morrison revealed he actually pitched Lucasfilm on Boba Fett appearing in Ahsoka Season 2, pointing out that he plays not just Boba Fett but all the clones based upon the character.He also bumped into Star Wars stewards Dave Filoni and Jon Favreau recently, and reminded them Boba Fett still exists. Apparently “they kind of said, 'Well, well,' they didn't want to say too much, put it that way. There was a few whispers of — they didn't want to say too much — but they just left it at that."That exchange left Morrison feeling like "I've been preserved for a later date, and I'm going to be tastier." He compared his feeling following the encounter to going to grandma’s house and seeing “that preservative jar of peaches up on the shelf.”Every Upcoming Star Wars Movie and TV Show“That's what I think,” he continued. “I'm one of those peaches, and I've been put up on the shelf. I've been preserved for a later date, and I'm going to be tastier.”Morrison could be playing coy, knowing full well he’s coming back to Star Wars in some form. After all, Rosario Dawson had no idea Mark Hamill was returning as Luke Skywalker in The Mandalorian until he walked on set. Lucasfilm has a history of holding its cards close to its chest.But it does sound to me like nothing is in the works for Boba Fett, unfortunately, and indeed last year Morrison offered a reason for why that might be the case. Speaking at the From Clone Troopers to Bounty Hunters panel at Fan Expo Chicago, Morrison cited The Book of Boba Fett's poor reception as the reason for the once beloved character not returning in Star Wars: The Mandalorian & Grogu. He added that Star Wars owner Disney hadn’t asked him to appear in the incoming film or a second season of The Book of Boba Fett.The show, which told the story of Boba Fett as he escaped from the Sarlacc Pit and acted as a miniature season of The Mandalorian, was among the worst received Star Wars shows. "This show's reception does seem to have impacted the future of the character in the franchise," Morrison said at the time. That was in August 2024. Has something changed in the year since? I'm not sure.Morrison originally played Jango Fett in Star Wars: Episode 2 – Attack of the Clones but years later rejoined Star Wars as Jango's son and clone Boba Fett. He's made clear his desire to return to Star Wars, saying he wants a chunk of The Mandalorian's time just as The Mandalorian led an episode of his show.Photo by Jun Sato/WireImage.Wesley is Director, News at IGN. Find him on Twitter at @wyp100. You can reach Wesley at wesley_yinpoole@ign.com or confidentially at wyp100@proton.me.
    #temuera #morrison #says #he039s #039sad039
    Temuera Morrison Says He's 'Sad' Not to Have Played Boba Fett Since the Divisive Disney+ show The Book of Boba Fett: 'I've Been Preserved for a Later Date'
    What’s happening with Boba Fett? The last time we saw the legendary Star Wars character was at the end of his own show, The Book of Boba Fett, in February 2022. Yes, the Disney+ spin-off series was divisive, with some Star Wars fans feeling it went too far in softening the iconic villain's character. But that can’t be it for Boba Fett, can it?Over three years later, it feels like The Book of Boba Fett Season 2 is stuck in a galaxy far, far away. Lucasfilm has given no indication that the show will return, with next year’s The Mandalorian & Grogu movie perhaps the best chance of a live-action reprisal. Will there be a The Mandalorian Season 4? Lucasfilm has yet to say, but if it does happen, perhaps Boba Fett would pop up there.In truth, the future of Boba Fett and Temuera Morrison, the actor who plays him, in the Star Wars franchise remains uncertain. And based on recent comments from Morrison himself, there is little reason to deviate from that position.PlaySpeaking in an interview with Collider to promote his new film, Ka Whawhai Tonu, the 64-year-old New Zealander said he felt "sad" not to have reprised the role since the end of The Book of Boba Fett.“WhereThe Book of Boba Fett Season 2? Where the hell is Season 2?" Morrison said. "I know they're doing Ahsoka Season 2. I'm going, 'Ah, where's my Season 2?'"According to Collider, Morrison revealed he actually pitched Lucasfilm on Boba Fett appearing in Ahsoka Season 2, pointing out that he plays not just Boba Fett but all the clones based upon the character.He also bumped into Star Wars stewards Dave Filoni and Jon Favreau recently, and reminded them Boba Fett still exists. Apparently “they kind of said, 'Well, well,' they didn't want to say too much, put it that way. There was a few whispers of — they didn't want to say too much — but they just left it at that."That exchange left Morrison feeling like "I've been preserved for a later date, and I'm going to be tastier." He compared his feeling following the encounter to going to grandma’s house and seeing “that preservative jar of peaches up on the shelf.”Every Upcoming Star Wars Movie and TV Show“That's what I think,” he continued. “I'm one of those peaches, and I've been put up on the shelf. I've been preserved for a later date, and I'm going to be tastier.”Morrison could be playing coy, knowing full well he’s coming back to Star Wars in some form. After all, Rosario Dawson had no idea Mark Hamill was returning as Luke Skywalker in The Mandalorian until he walked on set. Lucasfilm has a history of holding its cards close to its chest.But it does sound to me like nothing is in the works for Boba Fett, unfortunately, and indeed last year Morrison offered a reason for why that might be the case. Speaking at the From Clone Troopers to Bounty Hunters panel at Fan Expo Chicago, Morrison cited The Book of Boba Fett's poor reception as the reason for the once beloved character not returning in Star Wars: The Mandalorian & Grogu. He added that Star Wars owner Disney hadn’t asked him to appear in the incoming film or a second season of The Book of Boba Fett.The show, which told the story of Boba Fett as he escaped from the Sarlacc Pit and acted as a miniature season of The Mandalorian, was among the worst received Star Wars shows. "This show's reception does seem to have impacted the future of the character in the franchise," Morrison said at the time. That was in August 2024. Has something changed in the year since? I'm not sure.Morrison originally played Jango Fett in Star Wars: Episode 2 – Attack of the Clones but years later rejoined Star Wars as Jango's son and clone Boba Fett. He's made clear his desire to return to Star Wars, saying he wants a chunk of The Mandalorian's time just as The Mandalorian led an episode of his show.Photo by Jun Sato/WireImage.Wesley is Director, News at IGN. Find him on Twitter at @wyp100. You can reach Wesley at wesley_yinpoole@ign.com or confidentially at wyp100@proton.me. #temuera #morrison #says #he039s #039sad039
    WWW.IGN.COM
    Temuera Morrison Says He's 'Sad' Not to Have Played Boba Fett Since the Divisive Disney+ show The Book of Boba Fett: 'I've Been Preserved for a Later Date'
    What’s happening with Boba Fett? The last time we saw the legendary Star Wars character was at the end of his own show, The Book of Boba Fett, in February 2022. Yes, the Disney+ spin-off series was divisive, with some Star Wars fans feeling it went too far in softening the iconic villain's character. But that can’t be it for Boba Fett, can it?Over three years later, it feels like The Book of Boba Fett Season 2 is stuck in a galaxy far, far away. Lucasfilm has given no indication that the show will return, with next year’s The Mandalorian & Grogu movie perhaps the best chance of a live-action reprisal. Will there be a The Mandalorian Season 4? Lucasfilm has yet to say, but if it does happen, perhaps Boba Fett would pop up there.In truth, the future of Boba Fett and Temuera Morrison, the actor who plays him, in the Star Wars franchise remains uncertain. And based on recent comments from Morrison himself, there is little reason to deviate from that position.PlaySpeaking in an interview with Collider to promote his new film, Ka Whawhai Tonu (In The Fire of War), the 64-year-old New Zealander said he felt "sad" not to have reprised the role since the end of The Book of Boba Fett.“Where [sic] The Book of Boba Fett Season 2? Where the hell is Season 2?" Morrison said. "I know they're doing Ahsoka Season 2. I'm going, 'Ah, where's my Season 2?'"According to Collider, Morrison revealed he actually pitched Lucasfilm on Boba Fett appearing in Ahsoka Season 2 ("can I be Rex and take his helmet off, please?"), pointing out that he plays not just Boba Fett but all the clones based upon the character.He also bumped into Star Wars stewards Dave Filoni and Jon Favreau recently, and reminded them Boba Fett still exists. Apparently “they kind of said, 'Well, well,' they didn't want to say too much, put it that way. There was a few whispers of — they didn't want to say too much — but they just left it at that."That exchange left Morrison feeling like "I've been preserved for a later date, and I'm going to be tastier." He compared his feeling following the encounter to going to grandma’s house and seeing “that preservative jar of peaches up on the shelf.”Every Upcoming Star Wars Movie and TV Show“That's what I think,” he continued. “I'm one of those peaches, and I've been put up on the shelf. I've been preserved for a later date, and I'm going to be tastier.”Morrison could be playing coy, knowing full well he’s coming back to Star Wars in some form. After all, Rosario Dawson had no idea Mark Hamill was returning as Luke Skywalker in The Mandalorian until he walked on set. Lucasfilm has a history of holding its cards close to its chest.But it does sound to me like nothing is in the works for Boba Fett, unfortunately, and indeed last year Morrison offered a reason for why that might be the case. Speaking at the From Clone Troopers to Bounty Hunters panel at Fan Expo Chicago, Morrison cited The Book of Boba Fett's poor reception as the reason for the once beloved character not returning in Star Wars: The Mandalorian & Grogu. He added that Star Wars owner Disney hadn’t asked him to appear in the incoming film or a second season of The Book of Boba Fett.The show, which told the story of Boba Fett as he escaped from the Sarlacc Pit and acted as a miniature season of The Mandalorian, was among the worst received Star Wars shows. "This show's reception does seem to have impacted the future of the character in the franchise," Morrison said at the time. That was in August 2024. Has something changed in the year since? I'm not sure.Morrison originally played Jango Fett in Star Wars: Episode 2 – Attack of the Clones but years later rejoined Star Wars as Jango's son and clone Boba Fett. He's made clear his desire to return to Star Wars, saying he wants a chunk of The Mandalorian's time just as The Mandalorian led an episode of his show.Photo by Jun Sato/WireImage.Wesley is Director, News at IGN. Find him on Twitter at @wyp100. You can reach Wesley at wesley_yinpoole@ign.com or confidentially at wyp100@proton.me.
    0 Commenti 0 condivisioni
  • Looking Back at Two Classics: ILM Deploys the Fleet in ‘Star Trek: First Contact’ and ‘Rogue One: A Star Wars Story’

    Guided by visual effects supervisor John Knoll, ILM embraced continually evolving methodologies to craft breathtaking visual effects for the iconic space battles in First Contact and Rogue One.
    By Jay Stobie
    Visual effects supervisor John Knollconfers with modelmakers Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact.
    Bolstered by visual effects from Industrial Light & Magic, Star Trek: First Contactand Rogue One: A Star Wars Storypropelled their respective franchises to new heights. While Star Trek Generationswelcomed Captain Jean-Luc Picard’screw to the big screen, First Contact stood as the first Star Trek feature that did not focus on its original captain, the legendary James T. Kirk. Similarly, though Rogue One immediately preceded the events of Star Wars: A New Hope, it was set apart from the episodic Star Wars films and launched an era of storytelling outside of the main Skywalker saga that has gone on to include Solo: A Star Wars Story, The Mandalorian, Andor, Ahsoka, The Acolyte, and more.
    The two films also shared a key ILM contributor, John Knoll, who served as visual effects supervisor on both projects, as well as an executive producer on Rogue One. Currently, ILM’s executive creative director and senior visual effects supervisor, Knoll – who also conceived the initial framework for Rogue One’s story – guided ILM as it brought its talents to bear on these sci-fi and fantasy epics. The work involved crafting two spectacular starship-packed space clashes – First Contact’s Battle of Sector 001 and Rogue One’s Battle of Scarif. Although these iconic installments were released roughly two decades apart, they represent a captivating case study of how ILM’s approach to visual effects has evolved over time. With this in mind, let’s examine the films’ unforgettable space battles through the lens of fascinating in-universe parallels and the ILM-produced fleets that face off near Earth and Scarif.
    A final frame from the Battle of Scarif in Rogue One: A Star Wars Story.
    A Context for Conflict
    In First Contact, the United Federation of Planets – a 200-year-old interstellar government consisting of more than 150 member worlds – braces itself for an invasion by the Borg – an overwhelmingly powerful collective composed of cybernetic beings who devastate entire planets by assimilating their biological populations and technological innovations. The Borg only send a single vessel, a massive cube containing thousands of hive-minded drones and their queen, pushing the Federation’s Starfleet defenders to Earth’s doorstep. Conversely, in Rogue One, the Rebel Alliance – a fledgling coalition of freedom fighters – seeks to undermine and overthrow the stalwart Galactic Empire – a totalitarian regime preparing to tighten its grip on the galaxy by revealing a horrifying superweapon. A rebel team infiltrates a top-secret vault on Scarif in a bid to steal plans to that battle station, the dreaded Death Star, with hopes of exploiting a vulnerability in its design.
    On the surface, the situations could not seem to be more disparate, particularly in terms of the Federation’s well-established prestige and the Rebel Alliance’s haphazardly organized factions. Yet, upon closer inspection, the spaceborne conflicts at Earth and Scarif are linked by a vital commonality. The threat posed by the Borg is well-known to the Federation, but the sudden intrusion upon their space takes its defenses by surprise. Starfleet assembles any vessel within range – including antiquated Oberth-class science ships – to intercept the Borg cube in the Typhon Sector, only to be forced back to Earth on the edge of defeat. The unsanctioned mission to Scarif with Jyn Ersoand Cassian Andorand the sudden need to take down the planet’s shield gate propels the Rebel Alliance fleet into rushing to their rescue with everything from their flagship Profundity to GR-75 medium transports. Whether Federation or Rebel Alliance, these fleets gather in last-ditch efforts to oppose enemies who would embrace their eradication – the Battles of Sector 001 and Scarif are fights for survival.
    From Physical to Digital
    By the time Jonathan Frakes was selected to direct First Contact, Star Trek’s reliance on constructing traditional physical modelsfor its features was gradually giving way to innovative computer graphicsmodels, resulting in the film’s use of both techniques. “If one of the ships was to be seen full-screen and at length,” associate visual effects supervisor George Murphy told Cinefex’s Kevin H. Martin, “we knew it would be done as a stage model. Ships that would be doing a lot of elaborate maneuvers in space battle scenes would be created digitally.” In fact, physical and CG versions of the U.S.S. Enterprise-E appear in the film, with the latter being harnessed in shots involving the vessel’s entry into a temporal vortex at the conclusion of the Battle of Sector 001.
    Despite the technological leaps that ILM pioneered in the decades between First Contact and Rogue One, they considered filming physical miniatures for certain ship-related shots in the latter film. ILM considered filming physical miniatures for certain ship-related shots in Rogue One. The feature’s fleets were ultimately created digitally to allow for changes throughout post-production. “If it’s a photographed miniature element, it’s not possible to go back and make adjustments. So it’s the additional flexibility that comes with the computer graphics models that’s very attractive to many people,” John Knoll relayed to writer Jon Witmer at American Cinematographer’s TheASC.com.
    However, Knoll aimed to develop computer graphics that retained the same high-quality details as their physical counterparts, leading ILM to employ a modern approach to a time-honored modelmaking tactic. “I also wanted to emulate the kit-bashing aesthetic that had been part of Star Wars from the very beginning, where a lot of mechanical detail had been added onto the ships by using little pieces from plastic model kits,” explained Knoll in his chat with TheASC.com. For Rogue One, ILM replicated the process by obtaining such kits, scanning their parts, building a computer graphics library, and applying the CG parts to digitally modeled ships. “I’m very happy to say it was super-successful,” concluded Knoll. “I think a lot of our digital models look like they are motion-control models.”
    John Knollconfers with Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact.
    Legendary Lineages
    In First Contact, Captain Picard commanded a brand-new vessel, the Sovereign-class U.S.S. Enterprise-E, continuing the celebrated starship’s legacy in terms of its famous name and design aesthetic. Designed by John Eaves and developed into blueprints by Rick Sternbach, the Enterprise-E was built into a 10-foot physical model by ILM model project supervisor John Goodson and his shop’s talented team. ILM infused the ship with extraordinary detail, including viewports equipped with backlit set images from the craft’s predecessor, the U.S.S. Enterprise-D. For the vessel’s larger windows, namely those associated with the observation lounge and arboretum, ILM took a painstakingly practical approach to match the interiors shown with the real-world set pieces. “We filled that area of the model with tiny, micro-scale furniture,” Goodson informed Cinefex, “including tables and chairs.”
    Rogue One’s rebel team initially traversed the galaxy in a U-wing transport/gunship, which, much like the Enterprise-E, was a unique vessel that nonetheless channeled a certain degree of inspiration from a classic design. Lucasfilm’s Doug Chiang, a co-production designer for Rogue One, referred to the U-wing as the film’s “Huey helicopter version of an X-wing” in the Designing Rogue One bonus featurette on Disney+ before revealing that, “Towards the end of the design cycle, we actually decided that maybe we should put in more X-wing features. And so we took the X-wing engines and literally mounted them onto the configuration that we had going.” Modeled by ILM digital artist Colie Wertz, the U-wing’s final computer graphics design subtly incorporated these X-wing influences to give the transport a distinctive feel without making the craft seem out of place within the rebel fleet.
    While ILM’s work on the Enterprise-E’s viewports offered a compelling view toward the ship’s interior, a breakthrough LED setup for Rogue One permitted ILM to obtain realistic lighting on actors as they looked out from their ships and into the space around them. “All of our major spaceship cockpit scenes were done that way, with the gimbal in this giant horseshoe of LED panels we got fromVER, and we prepared graphics that went on the screens,” John Knoll shared with American Cinematographer’s Benjamin B and Jon D. Witmer. Furthermore, in Disney+’s Rogue One: Digital Storytelling bonus featurette, visual effects producer Janet Lewin noted, “For the actors, I think, in the space battle cockpits, for them to be able to see what was happening in the battle brought a higher level of accuracy to their performance.”
    The U.S.S. Enterprise-E in Star Trek: First Contact.
    Familiar Foes
    To transport First Contact’s Borg invaders, John Goodson’s team at ILM resurrected the Borg cube design previously seen in Star Trek: The Next Generationand Star Trek: Deep Space Nine, creating a nearly three-foot physical model to replace the one from the series. Art consultant and ILM veteran Bill George proposed that the cube’s seemingly straightforward layout be augmented with a complex network of photo-etched brass, a suggestion which produced a jagged surface and offered a visual that was both intricate and menacing. ILM also developed a two-foot motion-control model for a Borg sphere, a brand-new auxiliary vessel that emerged from the cube. “We vacuformed about 15 different patterns that conformed to this spherical curve and covered those with a lot of molded and cast pieces. Then we added tons of acid-etched brass over it, just like we had on the cube,” Goodson outlined to Cinefex’s Kevin H. Martin.
    As for Rogue One’s villainous fleet, reproducing the original trilogy’s Death Star and Imperial Star Destroyers centered upon translating physical models into digital assets. Although ILM no longer possessed A New Hope’s three-foot Death Star shooting model, John Knoll recreated the station’s surface paneling by gathering archival images, and as he spelled out to writer Joe Fordham in Cinefex, “I pieced all the images together. I unwrapped them into texture space and projected them onto a sphere with a trench. By doing that with enough pictures, I got pretty complete coverage of the original model, and that became a template upon which to redraw very high-resolution texture maps. Every panel, every vertical striped line, I matched from a photograph. It was as accurate as it was possible to be as a reproduction of the original model.”
    Knoll’s investigative eye continued to pay dividends when analyzing the three-foot and eight-foot Star Destroyer motion-control models, which had been built for A New Hope and Star Wars: The Empire Strikes Back, respectively. “Our general mantra was, ‘Match your memory of it more than the reality,’ because sometimes you go look at the actual prop in the archive building or you look back at the actual shot from the movie, and you go, ‘Oh, I remember it being a little better than that,’” Knoll conveyed to TheASC.com. This philosophy motivated ILM to combine elements from those two physical models into a single digital design. “Generally, we copied the three-footer for details like the superstructure on the top of the bridge, but then we copied the internal lighting plan from the eight-footer,” Knoll explained. “And then the upper surface of the three-footer was relatively undetailed because there were no shots that saw it closely, so we took a lot of the high-detail upper surface from the eight-footer. So it’s this amalgam of the two models, but the goal was to try to make it look like you remember it from A New Hope.”
    A final frame from Rogue One: A Star Wars Story.
    Forming Up the Fleets
    In addition to the U.S.S. Enterprise-E, the Battle of Sector 001 debuted numerous vessels representing four new Starfleet ship classes – the Akira, Steamrunner, Saber, and Norway – all designed by ILM visual effects art director Alex Jaeger. “Since we figured a lot of the background action in the space battle would be done with computer graphics ships that needed to be built from scratch anyway, I realized that there was no reason not to do some new designs,” John Knoll told American Cinematographer writer Ron Magid. Used in previous Star Trek projects, older physical models for the Oberth and Nebula classes were mixed into the fleet for good measure, though the vast majority of the armada originated as computer graphics.
    Over at Scarif, ILM portrayed the Rebel Alliance forces with computer graphics models of fresh designs, live-action versions of Star Wars Rebels’ VCX-100 light freighter Ghost and Hammerhead corvettes, and Star Wars staples. These ships face off against two Imperial Star Destroyers and squadrons of TIE fighters, and – upon their late arrival to the battle – Darth Vader’s Star Destroyer and the Death Star. The Tantive IV, a CR90 corvette more popularly referred to as a blockade runner, made its own special cameo at the tail end of the fight. As Princess Leia Organa’spersonal ship, the Tantive IV received the Death Star plans and fled the scene, destined to be captured by Vader’s Star Destroyer at the beginning of A New Hope. And, while we’re on the subject of intricate starship maneuvers and space-based choreography…
    Although the First Contact team could plan visual effects shots with animated storyboards, ILM supplied Gareth Edwards with a next-level virtual viewfinder that allowed the director to select his shots by immersing himself among Rogue One’s ships in real time. “What we wanted to do is give Gareth the opportunity to shoot his space battles and other all-digital scenes the same way he shoots his live-action. Then he could go in with this sort of virtual viewfinder and view the space battle going on, and figure out what the best angle was to shoot those ships from,” senior animation supervisor Hal Hickel described in the Rogue One: Digital Storytelling featurette. Hickel divulged that the sequence involving the dish array docking with the Death Star was an example of the “spontaneous discovery of great angles,” as the scene was never storyboarded or previsualized.
    Visual effects supervisor John Knoll with director Gareth Edwards during production of Rogue One: A Star Wars Story.
    Tough Little Ships
    The Federation and Rebel Alliance each deployed “tough little ships”in their respective conflicts, namely the U.S.S. Defiant from Deep Space Nine and the Tantive IV from A New Hope. VisionArt had already built a CG Defiant for the Deep Space Nine series, but ILM upgraded the model with images gathered from the ship’s three-foot physical model. A similar tactic was taken to bring the Tantive IV into the digital realm for Rogue One. “This was the Blockade Runner. This was the most accurate 1:1 reproduction we could possibly have made,” model supervisor Russell Paul declared to Cinefex’s Joe Fordham. “We did an extensive photo reference shoot and photogrammetry re-creation of the miniature. From there, we built it out as accurately as possible.” Speaking of sturdy ships, if you look very closely, you can spot a model of the Millennium Falcon flashing across the background as the U.S.S. Defiant makes an attack run on the Borg cube at the Battle of Sector 001!
    Exploration and Hope
    The in-universe ramifications that materialize from the Battles of Sector 001 and Scarif are monumental. The destruction of the Borg cube compels the Borg Queen to travel back in time in an attempt to vanquish Earth before the Federation can even be formed, but Captain Picard and the Enterprise-E foil the plot and end up helping their 21st century ancestors make “first contact” with another species, the logic-revering Vulcans. The post-Scarif benefits take longer to play out for the Rebel Alliance, but the theft of the Death Star plans eventually leads to the superweapon’s destruction. The Galactic Civil War is far from over, but Scarif is a significant step in the Alliance’s effort to overthrow the Empire.
    The visual effects ILM provided for First Contact and Rogue One contributed significantly to the critical and commercial acclaim both pictures enjoyed, a victory reflecting the relentless dedication, tireless work ethic, and innovative spirit embodied by visual effects supervisor John Knoll and ILM’s entire staff. While being interviewed for The Making of Star Trek: First Contact, actor Patrick Stewart praised ILM’s invaluable influence, emphasizing, “ILM was with us, on this movie, almost every day on set. There is so much that they are involved in.” And, regardless of your personal preferences – phasers or lasers, photon torpedoes or proton torpedoes, warp speed or hyperspace – perhaps Industrial Light & Magic’s ability to infuse excitement into both franchises demonstrates that Star Trek and Star Wars encompass themes that are not competitive, but compatible. After all, what goes together better than exploration and hope?

    Jay Stobieis a writer, author, and consultant who has contributed articles to ILM.com, Skysound.com, Star Wars Insider, StarWars.com, Star Trek Explorer, Star Trek Magazine, and StarTrek.com. Jay loves sci-fi, fantasy, and film, and you can learn more about him by visiting JayStobie.com or finding him on Twitter, Instagram, and other social media platforms at @StobiesGalaxy.
    #looking #back #two #classics #ilm
    Looking Back at Two Classics: ILM Deploys the Fleet in ‘Star Trek: First Contact’ and ‘Rogue One: A Star Wars Story’
    Guided by visual effects supervisor John Knoll, ILM embraced continually evolving methodologies to craft breathtaking visual effects for the iconic space battles in First Contact and Rogue One. By Jay Stobie Visual effects supervisor John Knollconfers with modelmakers Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact. Bolstered by visual effects from Industrial Light & Magic, Star Trek: First Contactand Rogue One: A Star Wars Storypropelled their respective franchises to new heights. While Star Trek Generationswelcomed Captain Jean-Luc Picard’screw to the big screen, First Contact stood as the first Star Trek feature that did not focus on its original captain, the legendary James T. Kirk. Similarly, though Rogue One immediately preceded the events of Star Wars: A New Hope, it was set apart from the episodic Star Wars films and launched an era of storytelling outside of the main Skywalker saga that has gone on to include Solo: A Star Wars Story, The Mandalorian, Andor, Ahsoka, The Acolyte, and more. The two films also shared a key ILM contributor, John Knoll, who served as visual effects supervisor on both projects, as well as an executive producer on Rogue One. Currently, ILM’s executive creative director and senior visual effects supervisor, Knoll – who also conceived the initial framework for Rogue One’s story – guided ILM as it brought its talents to bear on these sci-fi and fantasy epics. The work involved crafting two spectacular starship-packed space clashes – First Contact’s Battle of Sector 001 and Rogue One’s Battle of Scarif. Although these iconic installments were released roughly two decades apart, they represent a captivating case study of how ILM’s approach to visual effects has evolved over time. With this in mind, let’s examine the films’ unforgettable space battles through the lens of fascinating in-universe parallels and the ILM-produced fleets that face off near Earth and Scarif. A final frame from the Battle of Scarif in Rogue One: A Star Wars Story. A Context for Conflict In First Contact, the United Federation of Planets – a 200-year-old interstellar government consisting of more than 150 member worlds – braces itself for an invasion by the Borg – an overwhelmingly powerful collective composed of cybernetic beings who devastate entire planets by assimilating their biological populations and technological innovations. The Borg only send a single vessel, a massive cube containing thousands of hive-minded drones and their queen, pushing the Federation’s Starfleet defenders to Earth’s doorstep. Conversely, in Rogue One, the Rebel Alliance – a fledgling coalition of freedom fighters – seeks to undermine and overthrow the stalwart Galactic Empire – a totalitarian regime preparing to tighten its grip on the galaxy by revealing a horrifying superweapon. A rebel team infiltrates a top-secret vault on Scarif in a bid to steal plans to that battle station, the dreaded Death Star, with hopes of exploiting a vulnerability in its design. On the surface, the situations could not seem to be more disparate, particularly in terms of the Federation’s well-established prestige and the Rebel Alliance’s haphazardly organized factions. Yet, upon closer inspection, the spaceborne conflicts at Earth and Scarif are linked by a vital commonality. The threat posed by the Borg is well-known to the Federation, but the sudden intrusion upon their space takes its defenses by surprise. Starfleet assembles any vessel within range – including antiquated Oberth-class science ships – to intercept the Borg cube in the Typhon Sector, only to be forced back to Earth on the edge of defeat. The unsanctioned mission to Scarif with Jyn Ersoand Cassian Andorand the sudden need to take down the planet’s shield gate propels the Rebel Alliance fleet into rushing to their rescue with everything from their flagship Profundity to GR-75 medium transports. Whether Federation or Rebel Alliance, these fleets gather in last-ditch efforts to oppose enemies who would embrace their eradication – the Battles of Sector 001 and Scarif are fights for survival. From Physical to Digital By the time Jonathan Frakes was selected to direct First Contact, Star Trek’s reliance on constructing traditional physical modelsfor its features was gradually giving way to innovative computer graphicsmodels, resulting in the film’s use of both techniques. “If one of the ships was to be seen full-screen and at length,” associate visual effects supervisor George Murphy told Cinefex’s Kevin H. Martin, “we knew it would be done as a stage model. Ships that would be doing a lot of elaborate maneuvers in space battle scenes would be created digitally.” In fact, physical and CG versions of the U.S.S. Enterprise-E appear in the film, with the latter being harnessed in shots involving the vessel’s entry into a temporal vortex at the conclusion of the Battle of Sector 001. Despite the technological leaps that ILM pioneered in the decades between First Contact and Rogue One, they considered filming physical miniatures for certain ship-related shots in the latter film. ILM considered filming physical miniatures for certain ship-related shots in Rogue One. The feature’s fleets were ultimately created digitally to allow for changes throughout post-production. “If it’s a photographed miniature element, it’s not possible to go back and make adjustments. So it’s the additional flexibility that comes with the computer graphics models that’s very attractive to many people,” John Knoll relayed to writer Jon Witmer at American Cinematographer’s TheASC.com. However, Knoll aimed to develop computer graphics that retained the same high-quality details as their physical counterparts, leading ILM to employ a modern approach to a time-honored modelmaking tactic. “I also wanted to emulate the kit-bashing aesthetic that had been part of Star Wars from the very beginning, where a lot of mechanical detail had been added onto the ships by using little pieces from plastic model kits,” explained Knoll in his chat with TheASC.com. For Rogue One, ILM replicated the process by obtaining such kits, scanning their parts, building a computer graphics library, and applying the CG parts to digitally modeled ships. “I’m very happy to say it was super-successful,” concluded Knoll. “I think a lot of our digital models look like they are motion-control models.” John Knollconfers with Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact. Legendary Lineages In First Contact, Captain Picard commanded a brand-new vessel, the Sovereign-class U.S.S. Enterprise-E, continuing the celebrated starship’s legacy in terms of its famous name and design aesthetic. Designed by John Eaves and developed into blueprints by Rick Sternbach, the Enterprise-E was built into a 10-foot physical model by ILM model project supervisor John Goodson and his shop’s talented team. ILM infused the ship with extraordinary detail, including viewports equipped with backlit set images from the craft’s predecessor, the U.S.S. Enterprise-D. For the vessel’s larger windows, namely those associated with the observation lounge and arboretum, ILM took a painstakingly practical approach to match the interiors shown with the real-world set pieces. “We filled that area of the model with tiny, micro-scale furniture,” Goodson informed Cinefex, “including tables and chairs.” Rogue One’s rebel team initially traversed the galaxy in a U-wing transport/gunship, which, much like the Enterprise-E, was a unique vessel that nonetheless channeled a certain degree of inspiration from a classic design. Lucasfilm’s Doug Chiang, a co-production designer for Rogue One, referred to the U-wing as the film’s “Huey helicopter version of an X-wing” in the Designing Rogue One bonus featurette on Disney+ before revealing that, “Towards the end of the design cycle, we actually decided that maybe we should put in more X-wing features. And so we took the X-wing engines and literally mounted them onto the configuration that we had going.” Modeled by ILM digital artist Colie Wertz, the U-wing’s final computer graphics design subtly incorporated these X-wing influences to give the transport a distinctive feel without making the craft seem out of place within the rebel fleet. While ILM’s work on the Enterprise-E’s viewports offered a compelling view toward the ship’s interior, a breakthrough LED setup for Rogue One permitted ILM to obtain realistic lighting on actors as they looked out from their ships and into the space around them. “All of our major spaceship cockpit scenes were done that way, with the gimbal in this giant horseshoe of LED panels we got fromVER, and we prepared graphics that went on the screens,” John Knoll shared with American Cinematographer’s Benjamin B and Jon D. Witmer. Furthermore, in Disney+’s Rogue One: Digital Storytelling bonus featurette, visual effects producer Janet Lewin noted, “For the actors, I think, in the space battle cockpits, for them to be able to see what was happening in the battle brought a higher level of accuracy to their performance.” The U.S.S. Enterprise-E in Star Trek: First Contact. Familiar Foes To transport First Contact’s Borg invaders, John Goodson’s team at ILM resurrected the Borg cube design previously seen in Star Trek: The Next Generationand Star Trek: Deep Space Nine, creating a nearly three-foot physical model to replace the one from the series. Art consultant and ILM veteran Bill George proposed that the cube’s seemingly straightforward layout be augmented with a complex network of photo-etched brass, a suggestion which produced a jagged surface and offered a visual that was both intricate and menacing. ILM also developed a two-foot motion-control model for a Borg sphere, a brand-new auxiliary vessel that emerged from the cube. “We vacuformed about 15 different patterns that conformed to this spherical curve and covered those with a lot of molded and cast pieces. Then we added tons of acid-etched brass over it, just like we had on the cube,” Goodson outlined to Cinefex’s Kevin H. Martin. As for Rogue One’s villainous fleet, reproducing the original trilogy’s Death Star and Imperial Star Destroyers centered upon translating physical models into digital assets. Although ILM no longer possessed A New Hope’s three-foot Death Star shooting model, John Knoll recreated the station’s surface paneling by gathering archival images, and as he spelled out to writer Joe Fordham in Cinefex, “I pieced all the images together. I unwrapped them into texture space and projected them onto a sphere with a trench. By doing that with enough pictures, I got pretty complete coverage of the original model, and that became a template upon which to redraw very high-resolution texture maps. Every panel, every vertical striped line, I matched from a photograph. It was as accurate as it was possible to be as a reproduction of the original model.” Knoll’s investigative eye continued to pay dividends when analyzing the three-foot and eight-foot Star Destroyer motion-control models, which had been built for A New Hope and Star Wars: The Empire Strikes Back, respectively. “Our general mantra was, ‘Match your memory of it more than the reality,’ because sometimes you go look at the actual prop in the archive building or you look back at the actual shot from the movie, and you go, ‘Oh, I remember it being a little better than that,’” Knoll conveyed to TheASC.com. This philosophy motivated ILM to combine elements from those two physical models into a single digital design. “Generally, we copied the three-footer for details like the superstructure on the top of the bridge, but then we copied the internal lighting plan from the eight-footer,” Knoll explained. “And then the upper surface of the three-footer was relatively undetailed because there were no shots that saw it closely, so we took a lot of the high-detail upper surface from the eight-footer. So it’s this amalgam of the two models, but the goal was to try to make it look like you remember it from A New Hope.” A final frame from Rogue One: A Star Wars Story. Forming Up the Fleets In addition to the U.S.S. Enterprise-E, the Battle of Sector 001 debuted numerous vessels representing four new Starfleet ship classes – the Akira, Steamrunner, Saber, and Norway – all designed by ILM visual effects art director Alex Jaeger. “Since we figured a lot of the background action in the space battle would be done with computer graphics ships that needed to be built from scratch anyway, I realized that there was no reason not to do some new designs,” John Knoll told American Cinematographer writer Ron Magid. Used in previous Star Trek projects, older physical models for the Oberth and Nebula classes were mixed into the fleet for good measure, though the vast majority of the armada originated as computer graphics. Over at Scarif, ILM portrayed the Rebel Alliance forces with computer graphics models of fresh designs, live-action versions of Star Wars Rebels’ VCX-100 light freighter Ghost and Hammerhead corvettes, and Star Wars staples. These ships face off against two Imperial Star Destroyers and squadrons of TIE fighters, and – upon their late arrival to the battle – Darth Vader’s Star Destroyer and the Death Star. The Tantive IV, a CR90 corvette more popularly referred to as a blockade runner, made its own special cameo at the tail end of the fight. As Princess Leia Organa’spersonal ship, the Tantive IV received the Death Star plans and fled the scene, destined to be captured by Vader’s Star Destroyer at the beginning of A New Hope. And, while we’re on the subject of intricate starship maneuvers and space-based choreography… Although the First Contact team could plan visual effects shots with animated storyboards, ILM supplied Gareth Edwards with a next-level virtual viewfinder that allowed the director to select his shots by immersing himself among Rogue One’s ships in real time. “What we wanted to do is give Gareth the opportunity to shoot his space battles and other all-digital scenes the same way he shoots his live-action. Then he could go in with this sort of virtual viewfinder and view the space battle going on, and figure out what the best angle was to shoot those ships from,” senior animation supervisor Hal Hickel described in the Rogue One: Digital Storytelling featurette. Hickel divulged that the sequence involving the dish array docking with the Death Star was an example of the “spontaneous discovery of great angles,” as the scene was never storyboarded or previsualized. Visual effects supervisor John Knoll with director Gareth Edwards during production of Rogue One: A Star Wars Story. Tough Little Ships The Federation and Rebel Alliance each deployed “tough little ships”in their respective conflicts, namely the U.S.S. Defiant from Deep Space Nine and the Tantive IV from A New Hope. VisionArt had already built a CG Defiant for the Deep Space Nine series, but ILM upgraded the model with images gathered from the ship’s three-foot physical model. A similar tactic was taken to bring the Tantive IV into the digital realm for Rogue One. “This was the Blockade Runner. This was the most accurate 1:1 reproduction we could possibly have made,” model supervisor Russell Paul declared to Cinefex’s Joe Fordham. “We did an extensive photo reference shoot and photogrammetry re-creation of the miniature. From there, we built it out as accurately as possible.” Speaking of sturdy ships, if you look very closely, you can spot a model of the Millennium Falcon flashing across the background as the U.S.S. Defiant makes an attack run on the Borg cube at the Battle of Sector 001! Exploration and Hope The in-universe ramifications that materialize from the Battles of Sector 001 and Scarif are monumental. The destruction of the Borg cube compels the Borg Queen to travel back in time in an attempt to vanquish Earth before the Federation can even be formed, but Captain Picard and the Enterprise-E foil the plot and end up helping their 21st century ancestors make “first contact” with another species, the logic-revering Vulcans. The post-Scarif benefits take longer to play out for the Rebel Alliance, but the theft of the Death Star plans eventually leads to the superweapon’s destruction. The Galactic Civil War is far from over, but Scarif is a significant step in the Alliance’s effort to overthrow the Empire. The visual effects ILM provided for First Contact and Rogue One contributed significantly to the critical and commercial acclaim both pictures enjoyed, a victory reflecting the relentless dedication, tireless work ethic, and innovative spirit embodied by visual effects supervisor John Knoll and ILM’s entire staff. While being interviewed for The Making of Star Trek: First Contact, actor Patrick Stewart praised ILM’s invaluable influence, emphasizing, “ILM was with us, on this movie, almost every day on set. There is so much that they are involved in.” And, regardless of your personal preferences – phasers or lasers, photon torpedoes or proton torpedoes, warp speed or hyperspace – perhaps Industrial Light & Magic’s ability to infuse excitement into both franchises demonstrates that Star Trek and Star Wars encompass themes that are not competitive, but compatible. After all, what goes together better than exploration and hope? – Jay Stobieis a writer, author, and consultant who has contributed articles to ILM.com, Skysound.com, Star Wars Insider, StarWars.com, Star Trek Explorer, Star Trek Magazine, and StarTrek.com. Jay loves sci-fi, fantasy, and film, and you can learn more about him by visiting JayStobie.com or finding him on Twitter, Instagram, and other social media platforms at @StobiesGalaxy. #looking #back #two #classics #ilm
    WWW.ILM.COM
    Looking Back at Two Classics: ILM Deploys the Fleet in ‘Star Trek: First Contact’ and ‘Rogue One: A Star Wars Story’
    Guided by visual effects supervisor John Knoll, ILM embraced continually evolving methodologies to craft breathtaking visual effects for the iconic space battles in First Contact and Rogue One. By Jay Stobie Visual effects supervisor John Knoll (right) confers with modelmakers Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact (Credit: ILM). Bolstered by visual effects from Industrial Light & Magic, Star Trek: First Contact (1996) and Rogue One: A Star Wars Story (2016) propelled their respective franchises to new heights. While Star Trek Generations (1994) welcomed Captain Jean-Luc Picard’s (Patrick Stewart) crew to the big screen, First Contact stood as the first Star Trek feature that did not focus on its original captain, the legendary James T. Kirk (William Shatner). Similarly, though Rogue One immediately preceded the events of Star Wars: A New Hope (1977), it was set apart from the episodic Star Wars films and launched an era of storytelling outside of the main Skywalker saga that has gone on to include Solo: A Star Wars Story (2018), The Mandalorian (2019-23), Andor (2022-25), Ahsoka (2023), The Acolyte (2024), and more. The two films also shared a key ILM contributor, John Knoll, who served as visual effects supervisor on both projects, as well as an executive producer on Rogue One. Currently, ILM’s executive creative director and senior visual effects supervisor, Knoll – who also conceived the initial framework for Rogue One’s story – guided ILM as it brought its talents to bear on these sci-fi and fantasy epics. The work involved crafting two spectacular starship-packed space clashes – First Contact’s Battle of Sector 001 and Rogue One’s Battle of Scarif. Although these iconic installments were released roughly two decades apart, they represent a captivating case study of how ILM’s approach to visual effects has evolved over time. With this in mind, let’s examine the films’ unforgettable space battles through the lens of fascinating in-universe parallels and the ILM-produced fleets that face off near Earth and Scarif. A final frame from the Battle of Scarif in Rogue One: A Star Wars Story (Credit: ILM & Lucasfilm). A Context for Conflict In First Contact, the United Federation of Planets – a 200-year-old interstellar government consisting of more than 150 member worlds – braces itself for an invasion by the Borg – an overwhelmingly powerful collective composed of cybernetic beings who devastate entire planets by assimilating their biological populations and technological innovations. The Borg only send a single vessel, a massive cube containing thousands of hive-minded drones and their queen, pushing the Federation’s Starfleet defenders to Earth’s doorstep. Conversely, in Rogue One, the Rebel Alliance – a fledgling coalition of freedom fighters – seeks to undermine and overthrow the stalwart Galactic Empire – a totalitarian regime preparing to tighten its grip on the galaxy by revealing a horrifying superweapon. A rebel team infiltrates a top-secret vault on Scarif in a bid to steal plans to that battle station, the dreaded Death Star, with hopes of exploiting a vulnerability in its design. On the surface, the situations could not seem to be more disparate, particularly in terms of the Federation’s well-established prestige and the Rebel Alliance’s haphazardly organized factions. Yet, upon closer inspection, the spaceborne conflicts at Earth and Scarif are linked by a vital commonality. The threat posed by the Borg is well-known to the Federation, but the sudden intrusion upon their space takes its defenses by surprise. Starfleet assembles any vessel within range – including antiquated Oberth-class science ships – to intercept the Borg cube in the Typhon Sector, only to be forced back to Earth on the edge of defeat. The unsanctioned mission to Scarif with Jyn Erso (Felicity Jones) and Cassian Andor (Diego Luna) and the sudden need to take down the planet’s shield gate propels the Rebel Alliance fleet into rushing to their rescue with everything from their flagship Profundity to GR-75 medium transports. Whether Federation or Rebel Alliance, these fleets gather in last-ditch efforts to oppose enemies who would embrace their eradication – the Battles of Sector 001 and Scarif are fights for survival. From Physical to Digital By the time Jonathan Frakes was selected to direct First Contact, Star Trek’s reliance on constructing traditional physical models (many of which were built by ILM) for its features was gradually giving way to innovative computer graphics (CG) models, resulting in the film’s use of both techniques. “If one of the ships was to be seen full-screen and at length,” associate visual effects supervisor George Murphy told Cinefex’s Kevin H. Martin, “we knew it would be done as a stage model. Ships that would be doing a lot of elaborate maneuvers in space battle scenes would be created digitally.” In fact, physical and CG versions of the U.S.S. Enterprise-E appear in the film, with the latter being harnessed in shots involving the vessel’s entry into a temporal vortex at the conclusion of the Battle of Sector 001. Despite the technological leaps that ILM pioneered in the decades between First Contact and Rogue One, they considered filming physical miniatures for certain ship-related shots in the latter film. ILM considered filming physical miniatures for certain ship-related shots in Rogue One. The feature’s fleets were ultimately created digitally to allow for changes throughout post-production. “If it’s a photographed miniature element, it’s not possible to go back and make adjustments. So it’s the additional flexibility that comes with the computer graphics models that’s very attractive to many people,” John Knoll relayed to writer Jon Witmer at American Cinematographer’s TheASC.com. However, Knoll aimed to develop computer graphics that retained the same high-quality details as their physical counterparts, leading ILM to employ a modern approach to a time-honored modelmaking tactic. “I also wanted to emulate the kit-bashing aesthetic that had been part of Star Wars from the very beginning, where a lot of mechanical detail had been added onto the ships by using little pieces from plastic model kits,” explained Knoll in his chat with TheASC.com. For Rogue One, ILM replicated the process by obtaining such kits, scanning their parts, building a computer graphics library, and applying the CG parts to digitally modeled ships. “I’m very happy to say it was super-successful,” concluded Knoll. “I think a lot of our digital models look like they are motion-control models.” John Knoll (second from left) confers with Kim Smith and John Goodson with the miniature of the U.S.S. Enterprise-E during production of Star Trek: First Contact (Credit: ILM). Legendary Lineages In First Contact, Captain Picard commanded a brand-new vessel, the Sovereign-class U.S.S. Enterprise-E, continuing the celebrated starship’s legacy in terms of its famous name and design aesthetic. Designed by John Eaves and developed into blueprints by Rick Sternbach, the Enterprise-E was built into a 10-foot physical model by ILM model project supervisor John Goodson and his shop’s talented team. ILM infused the ship with extraordinary detail, including viewports equipped with backlit set images from the craft’s predecessor, the U.S.S. Enterprise-D. For the vessel’s larger windows, namely those associated with the observation lounge and arboretum, ILM took a painstakingly practical approach to match the interiors shown with the real-world set pieces. “We filled that area of the model with tiny, micro-scale furniture,” Goodson informed Cinefex, “including tables and chairs.” Rogue One’s rebel team initially traversed the galaxy in a U-wing transport/gunship, which, much like the Enterprise-E, was a unique vessel that nonetheless channeled a certain degree of inspiration from a classic design. Lucasfilm’s Doug Chiang, a co-production designer for Rogue One, referred to the U-wing as the film’s “Huey helicopter version of an X-wing” in the Designing Rogue One bonus featurette on Disney+ before revealing that, “Towards the end of the design cycle, we actually decided that maybe we should put in more X-wing features. And so we took the X-wing engines and literally mounted them onto the configuration that we had going.” Modeled by ILM digital artist Colie Wertz, the U-wing’s final computer graphics design subtly incorporated these X-wing influences to give the transport a distinctive feel without making the craft seem out of place within the rebel fleet. While ILM’s work on the Enterprise-E’s viewports offered a compelling view toward the ship’s interior, a breakthrough LED setup for Rogue One permitted ILM to obtain realistic lighting on actors as they looked out from their ships and into the space around them. “All of our major spaceship cockpit scenes were done that way, with the gimbal in this giant horseshoe of LED panels we got from [equipment vendor] VER, and we prepared graphics that went on the screens,” John Knoll shared with American Cinematographer’s Benjamin B and Jon D. Witmer. Furthermore, in Disney+’s Rogue One: Digital Storytelling bonus featurette, visual effects producer Janet Lewin noted, “For the actors, I think, in the space battle cockpits, for them to be able to see what was happening in the battle brought a higher level of accuracy to their performance.” The U.S.S. Enterprise-E in Star Trek: First Contact (Credit: Paramount). Familiar Foes To transport First Contact’s Borg invaders, John Goodson’s team at ILM resurrected the Borg cube design previously seen in Star Trek: The Next Generation (1987) and Star Trek: Deep Space Nine (1993), creating a nearly three-foot physical model to replace the one from the series. Art consultant and ILM veteran Bill George proposed that the cube’s seemingly straightforward layout be augmented with a complex network of photo-etched brass, a suggestion which produced a jagged surface and offered a visual that was both intricate and menacing. ILM also developed a two-foot motion-control model for a Borg sphere, a brand-new auxiliary vessel that emerged from the cube. “We vacuformed about 15 different patterns that conformed to this spherical curve and covered those with a lot of molded and cast pieces. Then we added tons of acid-etched brass over it, just like we had on the cube,” Goodson outlined to Cinefex’s Kevin H. Martin. As for Rogue One’s villainous fleet, reproducing the original trilogy’s Death Star and Imperial Star Destroyers centered upon translating physical models into digital assets. Although ILM no longer possessed A New Hope’s three-foot Death Star shooting model, John Knoll recreated the station’s surface paneling by gathering archival images, and as he spelled out to writer Joe Fordham in Cinefex, “I pieced all the images together. I unwrapped them into texture space and projected them onto a sphere with a trench. By doing that with enough pictures, I got pretty complete coverage of the original model, and that became a template upon which to redraw very high-resolution texture maps. Every panel, every vertical striped line, I matched from a photograph. It was as accurate as it was possible to be as a reproduction of the original model.” Knoll’s investigative eye continued to pay dividends when analyzing the three-foot and eight-foot Star Destroyer motion-control models, which had been built for A New Hope and Star Wars: The Empire Strikes Back (1980), respectively. “Our general mantra was, ‘Match your memory of it more than the reality,’ because sometimes you go look at the actual prop in the archive building or you look back at the actual shot from the movie, and you go, ‘Oh, I remember it being a little better than that,’” Knoll conveyed to TheASC.com. This philosophy motivated ILM to combine elements from those two physical models into a single digital design. “Generally, we copied the three-footer for details like the superstructure on the top of the bridge, but then we copied the internal lighting plan from the eight-footer,” Knoll explained. “And then the upper surface of the three-footer was relatively undetailed because there were no shots that saw it closely, so we took a lot of the high-detail upper surface from the eight-footer. So it’s this amalgam of the two models, but the goal was to try to make it look like you remember it from A New Hope.” A final frame from Rogue One: A Star Wars Story (Credit: ILM & Lucasfilm). Forming Up the Fleets In addition to the U.S.S. Enterprise-E, the Battle of Sector 001 debuted numerous vessels representing four new Starfleet ship classes – the Akira, Steamrunner, Saber, and Norway – all designed by ILM visual effects art director Alex Jaeger. “Since we figured a lot of the background action in the space battle would be done with computer graphics ships that needed to be built from scratch anyway, I realized that there was no reason not to do some new designs,” John Knoll told American Cinematographer writer Ron Magid. Used in previous Star Trek projects, older physical models for the Oberth and Nebula classes were mixed into the fleet for good measure, though the vast majority of the armada originated as computer graphics. Over at Scarif, ILM portrayed the Rebel Alliance forces with computer graphics models of fresh designs (the MC75 cruiser Profundity and U-wings), live-action versions of Star Wars Rebels’ VCX-100 light freighter Ghost and Hammerhead corvettes, and Star Wars staples (Nebulon-B frigates, X-wings, Y-wings, and more). These ships face off against two Imperial Star Destroyers and squadrons of TIE fighters, and – upon their late arrival to the battle – Darth Vader’s Star Destroyer and the Death Star. The Tantive IV, a CR90 corvette more popularly referred to as a blockade runner, made its own special cameo at the tail end of the fight. As Princess Leia Organa’s (Carrie Fisher and Ingvild Deila) personal ship, the Tantive IV received the Death Star plans and fled the scene, destined to be captured by Vader’s Star Destroyer at the beginning of A New Hope. And, while we’re on the subject of intricate starship maneuvers and space-based choreography… Although the First Contact team could plan visual effects shots with animated storyboards, ILM supplied Gareth Edwards with a next-level virtual viewfinder that allowed the director to select his shots by immersing himself among Rogue One’s ships in real time. “What we wanted to do is give Gareth the opportunity to shoot his space battles and other all-digital scenes the same way he shoots his live-action. Then he could go in with this sort of virtual viewfinder and view the space battle going on, and figure out what the best angle was to shoot those ships from,” senior animation supervisor Hal Hickel described in the Rogue One: Digital Storytelling featurette. Hickel divulged that the sequence involving the dish array docking with the Death Star was an example of the “spontaneous discovery of great angles,” as the scene was never storyboarded or previsualized. Visual effects supervisor John Knoll with director Gareth Edwards during production of Rogue One: A Star Wars Story (Credit: ILM & Lucasfilm). Tough Little Ships The Federation and Rebel Alliance each deployed “tough little ships” (an endearing description Commander William T. Riker [Jonathan Frakes] bestowed upon the U.S.S. Defiant in First Contact) in their respective conflicts, namely the U.S.S. Defiant from Deep Space Nine and the Tantive IV from A New Hope. VisionArt had already built a CG Defiant for the Deep Space Nine series, but ILM upgraded the model with images gathered from the ship’s three-foot physical model. A similar tactic was taken to bring the Tantive IV into the digital realm for Rogue One. “This was the Blockade Runner. This was the most accurate 1:1 reproduction we could possibly have made,” model supervisor Russell Paul declared to Cinefex’s Joe Fordham. “We did an extensive photo reference shoot and photogrammetry re-creation of the miniature. From there, we built it out as accurately as possible.” Speaking of sturdy ships, if you look very closely, you can spot a model of the Millennium Falcon flashing across the background as the U.S.S. Defiant makes an attack run on the Borg cube at the Battle of Sector 001! Exploration and Hope The in-universe ramifications that materialize from the Battles of Sector 001 and Scarif are monumental. The destruction of the Borg cube compels the Borg Queen to travel back in time in an attempt to vanquish Earth before the Federation can even be formed, but Captain Picard and the Enterprise-E foil the plot and end up helping their 21st century ancestors make “first contact” with another species, the logic-revering Vulcans. The post-Scarif benefits take longer to play out for the Rebel Alliance, but the theft of the Death Star plans eventually leads to the superweapon’s destruction. The Galactic Civil War is far from over, but Scarif is a significant step in the Alliance’s effort to overthrow the Empire. The visual effects ILM provided for First Contact and Rogue One contributed significantly to the critical and commercial acclaim both pictures enjoyed, a victory reflecting the relentless dedication, tireless work ethic, and innovative spirit embodied by visual effects supervisor John Knoll and ILM’s entire staff. While being interviewed for The Making of Star Trek: First Contact, actor Patrick Stewart praised ILM’s invaluable influence, emphasizing, “ILM was with us, on this movie, almost every day on set. There is so much that they are involved in.” And, regardless of your personal preferences – phasers or lasers, photon torpedoes or proton torpedoes, warp speed or hyperspace – perhaps Industrial Light & Magic’s ability to infuse excitement into both franchises demonstrates that Star Trek and Star Wars encompass themes that are not competitive, but compatible. After all, what goes together better than exploration and hope? – Jay Stobie (he/him) is a writer, author, and consultant who has contributed articles to ILM.com, Skysound.com, Star Wars Insider, StarWars.com, Star Trek Explorer, Star Trek Magazine, and StarTrek.com. Jay loves sci-fi, fantasy, and film, and you can learn more about him by visiting JayStobie.com or finding him on Twitter, Instagram, and other social media platforms at @StobiesGalaxy.
    0 Commenti 0 condivisioni
  • The art of two Mickeys

    Classic splitscreens, traditional face replacements and new approaches to machine learning-assisted face swapping allowed for twinning shots in ‘Mickey 17’. An excerpt from issue #32 of befores & afters magazine.
    The art of representing two characters on screen at the same time has become known as ‘twinning’. For Mickey 17 visual effects supervisor Dan Glass, the effect of seeing both Mickey 17 and 18 together was one he looked to achieve with a variety of methodologies. “With a technique like that,” he says, “you always want to use a range of tricks, because you don’t want people to figure it out. You want to keep them like, ‘Oh, wait a minute. How did they…?”
    “Going back to the way that Director Bong is so prepared and organized,” adds Glass, “it again makes the world of difference with that kind of work, because he thumbnails every shot. Then, some of them are a bit more fleshed out in storyboards. You can look at it and go, ‘Okay, in this situation, this is what the camera’s doing, this is what the actor’s doing,’ which in itself is quite interesting, because he pre-thinks all of this. You’d think that the actors show up and basically just have to follow the steps like robots. It’s not like that. He gives them an environment to work in, but the shots do end up extraordinarily close to what he thumbnails, and it made it a lot simpler to go through.”

    Those different approaches to twinning ranged from simple splitscreens, to traditional face replacements, and then substantially with a machine learned AI approach, now usually termed ‘face swapping’. What made the twinning work a tougher task than usual, suggests Glass, was the fact that the two Pattinson characters are virtually identical.
    “Normally, when you’re doing some kind of face replacement, you’re comparing it to a memory of the face. But this was right in front of you as two Mickeys looking strikingly similar.”
    Here’s how a typical twinning shot was achieved, as described by Glass. “Because Mickey was mostly dressed the same, with only a slight hair change, we were able to have Robert play both roles and to do them one after another. Sometimes, you have to do these things where hair and makeup or costume has a significant variation, so you’re either waiting a long time, which slows production, or you’re coming back at another time to do the different roles, which always makes the process a lot more complicated to match, but we were able to do that immediately.”

    “Based on the design of the shot,” continues Glass, “I would recommend which of Robert’s parts should be shot first. This was most often determined by which role had more impact on the camera movement. A huge credit goes to Robert for his ability to flip between the roles so effortlessly.”
    In the film, Mickey 17 is more passive and Mickey 18 is more aggressive. Pattinson reflected the distinct characters in his actions, including for a moment in which they fight. This fight, overseen by stunt coordinator Paul Lowe, represented moments of close interaction between the two Mickeys. It was here that a body double was crucial in shooting. The body double was also relied upon for the classic twinning technique of shooting ‘dirty’ over-the- shoulder out of focus shots of the double—ie. 17 looking at 18. However, it was quickly determined that even these would need face replacement work. “Robert’s jawline is so distinct that even those had to be replaced or shot as split screens,” observes Glass.

    When the shot was a moving one, no motion control was employed. “I’ve never been a big advocate for motion control,” states Glass. “To me it’s applicable when you’re doing things like miniatures where you need many matching passes, but I think when performances are involved, it interferes too much. It slows down a production’s speed of movement, but it’s also restrictive. Performance and camera always benefit from more flexibility.”
    “It helped tremendously that Director Bong and DOP Darius Khondji shot quite classically with minimal crane and Steadicam moves,” says Glass. “So, a lot of the moves are pan and dolly. There are some Steadicams in there that we were sometimes able to do splitscreens on. I wasn’t always sure that we could get away with the splitscreen as we shot it, but since we were always shooting the two roles, we had the footage to assess the practicality later. We were always prepared to go down a CG or machine learning route, but where we could use the splitscreen, that was the preference.”
    The Hydralite rig, developed by Volucap. Source:
    Rising Sun Pictureshandled the majority of twinning visual effects, completing them as splitscreen composites, 2D face replacements, and most notably via their machine learning toolset REVIZE, which utilized facial and body capture of Pattinson to train a model of his face and torso to swap for the double’s. A custom capture rig, dubbed the ‘Crazy Rig’ and now officially, The Hydralite, was devised and configured by Volucap to capture multiple angles of Robert on set in each lighting environment in order to produce the best possible reference for the machine learning algorithm. “For me, it was a completely legitimate use of the technique,” attests Glass, in terms of the machine learning approach. “All of the footage that we used to go into that process was captured on our movie for our movie. There’s nothing historic, or going through past libraries of footage, and it was all with Robert’s approval. I think the results were tremendous.”
    “It’s staggering to me as I watch the movie that the performances of each character are so flawlessly consistent throughout the film, because I know how much we were jumping around,” notes Glass. “I did encourage that we rehearse scenes ahead. Let’s say 17 was going to be the first role we captured, I’d have them rehearse it the other way around so that the double knew what he was going to do. Therefore, eyelines, movement, pacing and in instances where we were basically replacing the likeness of his head or even torso, we were still able to use the double’s performance and then map to that.”

    Read the full Mickey 17 issue of befores & afters magazine in PRINT from Amazon or as a DIGITAL EDITION on Patreon. Remember, you can also subscribe to the DIGITAL EDITION as a tier on the Patreon and get a new issue every time one is released.
    The post The art of two Mickeys appeared first on befores & afters.
    #art #two #mickeys
    The art of two Mickeys
    Classic splitscreens, traditional face replacements and new approaches to machine learning-assisted face swapping allowed for twinning shots in ‘Mickey 17’. An excerpt from issue #32 of befores & afters magazine. The art of representing two characters on screen at the same time has become known as ‘twinning’. For Mickey 17 visual effects supervisor Dan Glass, the effect of seeing both Mickey 17 and 18 together was one he looked to achieve with a variety of methodologies. “With a technique like that,” he says, “you always want to use a range of tricks, because you don’t want people to figure it out. You want to keep them like, ‘Oh, wait a minute. How did they…?” “Going back to the way that Director Bong is so prepared and organized,” adds Glass, “it again makes the world of difference with that kind of work, because he thumbnails every shot. Then, some of them are a bit more fleshed out in storyboards. You can look at it and go, ‘Okay, in this situation, this is what the camera’s doing, this is what the actor’s doing,’ which in itself is quite interesting, because he pre-thinks all of this. You’d think that the actors show up and basically just have to follow the steps like robots. It’s not like that. He gives them an environment to work in, but the shots do end up extraordinarily close to what he thumbnails, and it made it a lot simpler to go through.” Those different approaches to twinning ranged from simple splitscreens, to traditional face replacements, and then substantially with a machine learned AI approach, now usually termed ‘face swapping’. What made the twinning work a tougher task than usual, suggests Glass, was the fact that the two Pattinson characters are virtually identical. “Normally, when you’re doing some kind of face replacement, you’re comparing it to a memory of the face. But this was right in front of you as two Mickeys looking strikingly similar.” Here’s how a typical twinning shot was achieved, as described by Glass. “Because Mickey was mostly dressed the same, with only a slight hair change, we were able to have Robert play both roles and to do them one after another. Sometimes, you have to do these things where hair and makeup or costume has a significant variation, so you’re either waiting a long time, which slows production, or you’re coming back at another time to do the different roles, which always makes the process a lot more complicated to match, but we were able to do that immediately.” “Based on the design of the shot,” continues Glass, “I would recommend which of Robert’s parts should be shot first. This was most often determined by which role had more impact on the camera movement. A huge credit goes to Robert for his ability to flip between the roles so effortlessly.” In the film, Mickey 17 is more passive and Mickey 18 is more aggressive. Pattinson reflected the distinct characters in his actions, including for a moment in which they fight. This fight, overseen by stunt coordinator Paul Lowe, represented moments of close interaction between the two Mickeys. It was here that a body double was crucial in shooting. The body double was also relied upon for the classic twinning technique of shooting ‘dirty’ over-the- shoulder out of focus shots of the double—ie. 17 looking at 18. However, it was quickly determined that even these would need face replacement work. “Robert’s jawline is so distinct that even those had to be replaced or shot as split screens,” observes Glass. When the shot was a moving one, no motion control was employed. “I’ve never been a big advocate for motion control,” states Glass. “To me it’s applicable when you’re doing things like miniatures where you need many matching passes, but I think when performances are involved, it interferes too much. It slows down a production’s speed of movement, but it’s also restrictive. Performance and camera always benefit from more flexibility.” “It helped tremendously that Director Bong and DOP Darius Khondji shot quite classically with minimal crane and Steadicam moves,” says Glass. “So, a lot of the moves are pan and dolly. There are some Steadicams in there that we were sometimes able to do splitscreens on. I wasn’t always sure that we could get away with the splitscreen as we shot it, but since we were always shooting the two roles, we had the footage to assess the practicality later. We were always prepared to go down a CG or machine learning route, but where we could use the splitscreen, that was the preference.” The Hydralite rig, developed by Volucap. Source: Rising Sun Pictureshandled the majority of twinning visual effects, completing them as splitscreen composites, 2D face replacements, and most notably via their machine learning toolset REVIZE, which utilized facial and body capture of Pattinson to train a model of his face and torso to swap for the double’s. A custom capture rig, dubbed the ‘Crazy Rig’ and now officially, The Hydralite, was devised and configured by Volucap to capture multiple angles of Robert on set in each lighting environment in order to produce the best possible reference for the machine learning algorithm. “For me, it was a completely legitimate use of the technique,” attests Glass, in terms of the machine learning approach. “All of the footage that we used to go into that process was captured on our movie for our movie. There’s nothing historic, or going through past libraries of footage, and it was all with Robert’s approval. I think the results were tremendous.” “It’s staggering to me as I watch the movie that the performances of each character are so flawlessly consistent throughout the film, because I know how much we were jumping around,” notes Glass. “I did encourage that we rehearse scenes ahead. Let’s say 17 was going to be the first role we captured, I’d have them rehearse it the other way around so that the double knew what he was going to do. Therefore, eyelines, movement, pacing and in instances where we were basically replacing the likeness of his head or even torso, we were still able to use the double’s performance and then map to that.” Read the full Mickey 17 issue of befores & afters magazine in PRINT from Amazon or as a DIGITAL EDITION on Patreon. Remember, you can also subscribe to the DIGITAL EDITION as a tier on the Patreon and get a new issue every time one is released. The post The art of two Mickeys appeared first on befores & afters. #art #two #mickeys
    BEFORESANDAFTERS.COM
    The art of two Mickeys
    Classic splitscreens, traditional face replacements and new approaches to machine learning-assisted face swapping allowed for twinning shots in ‘Mickey 17’. An excerpt from issue #32 of befores & afters magazine. The art of representing two characters on screen at the same time has become known as ‘twinning’. For Mickey 17 visual effects supervisor Dan Glass, the effect of seeing both Mickey 17 and 18 together was one he looked to achieve with a variety of methodologies. “With a technique like that,” he says, “you always want to use a range of tricks, because you don’t want people to figure it out. You want to keep them like, ‘Oh, wait a minute. How did they…?” “Going back to the way that Director Bong is so prepared and organized,” adds Glass, “it again makes the world of difference with that kind of work, because he thumbnails every shot. Then, some of them are a bit more fleshed out in storyboards. You can look at it and go, ‘Okay, in this situation, this is what the camera’s doing, this is what the actor’s doing,’ which in itself is quite interesting, because he pre-thinks all of this. You’d think that the actors show up and basically just have to follow the steps like robots. It’s not like that. He gives them an environment to work in, but the shots do end up extraordinarily close to what he thumbnails, and it made it a lot simpler to go through.” Those different approaches to twinning ranged from simple splitscreens, to traditional face replacements, and then substantially with a machine learned AI approach, now usually termed ‘face swapping’. What made the twinning work a tougher task than usual, suggests Glass, was the fact that the two Pattinson characters are virtually identical. “Normally, when you’re doing some kind of face replacement, you’re comparing it to a memory of the face. But this was right in front of you as two Mickeys looking strikingly similar.” Here’s how a typical twinning shot was achieved, as described by Glass. “Because Mickey was mostly dressed the same, with only a slight hair change, we were able to have Robert play both roles and to do them one after another. Sometimes, you have to do these things where hair and makeup or costume has a significant variation, so you’re either waiting a long time, which slows production, or you’re coming back at another time to do the different roles, which always makes the process a lot more complicated to match, but we were able to do that immediately.” “Based on the design of the shot,” continues Glass, “I would recommend which of Robert’s parts should be shot first. This was most often determined by which role had more impact on the camera movement. A huge credit goes to Robert for his ability to flip between the roles so effortlessly.” In the film, Mickey 17 is more passive and Mickey 18 is more aggressive. Pattinson reflected the distinct characters in his actions, including for a moment in which they fight. This fight, overseen by stunt coordinator Paul Lowe, represented moments of close interaction between the two Mickeys. It was here that a body double was crucial in shooting. The body double was also relied upon for the classic twinning technique of shooting ‘dirty’ over-the- shoulder out of focus shots of the double—ie. 17 looking at 18. However, it was quickly determined that even these would need face replacement work. “Robert’s jawline is so distinct that even those had to be replaced or shot as split screens,” observes Glass. When the shot was a moving one, no motion control was employed. “I’ve never been a big advocate for motion control,” states Glass. “To me it’s applicable when you’re doing things like miniatures where you need many matching passes, but I think when performances are involved, it interferes too much. It slows down a production’s speed of movement, but it’s also restrictive. Performance and camera always benefit from more flexibility.” “It helped tremendously that Director Bong and DOP Darius Khondji shot quite classically with minimal crane and Steadicam moves,” says Glass. “So, a lot of the moves are pan and dolly. There are some Steadicams in there that we were sometimes able to do splitscreens on. I wasn’t always sure that we could get away with the splitscreen as we shot it, but since we were always shooting the two roles, we had the footage to assess the practicality later. We were always prepared to go down a CG or machine learning route, but where we could use the splitscreen, that was the preference.” The Hydralite rig, developed by Volucap. Source: https://volucap.com Rising Sun Pictures (visual effects supervisor Guido Wolter) handled the majority of twinning visual effects, completing them as splitscreen composites, 2D face replacements, and most notably via their machine learning toolset REVIZE, which utilized facial and body capture of Pattinson to train a model of his face and torso to swap for the double’s. A custom capture rig, dubbed the ‘Crazy Rig’ and now officially, The Hydralite, was devised and configured by Volucap to capture multiple angles of Robert on set in each lighting environment in order to produce the best possible reference for the machine learning algorithm. “For me, it was a completely legitimate use of the technique,” attests Glass, in terms of the machine learning approach. “All of the footage that we used to go into that process was captured on our movie for our movie. There’s nothing historic, or going through past libraries of footage, and it was all with Robert’s approval. I think the results were tremendous.” “It’s staggering to me as I watch the movie that the performances of each character are so flawlessly consistent throughout the film, because I know how much we were jumping around,” notes Glass. “I did encourage that we rehearse scenes ahead. Let’s say 17 was going to be the first role we captured, I’d have them rehearse it the other way around so that the double knew what he was going to do. Therefore, eyelines, movement, pacing and in instances where we were basically replacing the likeness of his head or even torso, we were still able to use the double’s performance and then map to that.” Read the full Mickey 17 issue of befores & afters magazine in PRINT from Amazon or as a DIGITAL EDITION on Patreon. Remember, you can also subscribe to the DIGITAL EDITION as a tier on the Patreon and get a new issue every time one is released. The post The art of two Mickeys appeared first on befores & afters.
    0 Commenti 0 condivisioni
  • DISCOVERING ELIO

    By TREVOR HOGG

    Images courtesy of Pixar.

    The character design of Glordon is based on a tardigrade, which is a microscopic water bear.

    Rather than look at the unknown as something to be feared, Pixar has decided to do some wish fulfillment with Elio, where a lonely adolescent astrophile gets abducted by aliens and is mistaken as the leader of Earth. Originally conceived and directed by Adrian Molina, the coming-of-age science fiction adventure was shepherded by Domee Shi and Madeline Sharafian, who had previously worked together on Turning Red.
    “Space is often seen as dark, mysterious and scary, but there is also so much hope, wonder and curiosity,” notes Shi, director of Elio. “It’s like anything is ‘out there.’ Elio captures how a lot of us feel at different points of our lives, when we were kids like him, or even now wanting to be off of this current planet because it’s just too much. For Elio, it’s a rescue. I feel that there’s something so universal about that feeling of wanting to be taken away and taken care of. To know that you’re not alone and somebody chose you and picked you up.”

    The character design of Glordon is based on a tardigrade, which is a microscopic water bear.

    There is a stark contrast between how Earth and the alien world, known as the Communiverse, are portrayed. “The more we worked with the animators on Glordon and Helix, they began to realize that Domee and I respond positively when thosecharacters are exaggerated, made cute, round and chubby,” states Sharafian, director of Elio. “That automatically started to differentiate the way the Earth and space feel.” A certain question had to be answered when designing the United Nations-inspired Communiverse. “It was coming from a place of this lonely kid who feels like no one wants him on Earth,” Shi explains. “What would be heaven and paradise for him? The Communiverse was built around that idea.” A sense of belonging is an important theme. “It’s also inspired by Adrian Molina’s backstory, and our backstories too, of going to animation college,” Sharafian remarks. “For the first time, we said, ‘This is where everybody like me is!’”

    Green is the thematic color for Elio.

    Visual effects are an important storytelling tool. “Especially, for our movie, which is about this boy going to this crazy incredible world of the Communiverse,” Shi observes. “It has to be dazzling and look spectacular on the big screen and feel like paradise. Elio is such a visual feast, and you do feel like, ‘I want to stay here no matter what. I can’t believe that this place even exists.’ Visual effects are a powerful tool to help you feel what the characters are feeling.” A wishlist became a reality for the directors. “Claudia Chung Saniigave Domee and me carte blanche for wish fulfillment for ourselves,” Sharafian remarks. “What do you want Elio’s outfit in space to look like? It was a difficult costume, but now when we watch the movie, we’re all so proud of it. Elio looks fabulous, and he’s so happy to be wearing that outfit. Who would want to take that off?”

    The Communiverse was meant to feel like a place that a child would love to visit and explore.

    Methodology rather than technology went through the biggest change for the production. “The Communiverse is super complex and has lots of moving pieces. But there’s not much CG can’t do anymore,” notes Claudia Chung Sanii. “Elemental did effects characters. We did long curly hair, dresses, capes, water and fire. What we hadn’t done before was be a part of that design process. How do we get lighting into layout? How do we see the shaders in animation in layout? The tools department was working on a software called Luna which does that. I went to the tools department and asked, ‘Can I play around with it?’ They were like, ‘Okay. But it’s not ready yet.’ Tools will basically be bringing RenderMan and an interactive lighting workflow to the pipeline across all of these DCCs. Because we light in Katana, you can’t get back upstream. The conceit that we were dipping our toe in on Elio was, ‘Whatever you do in lighting, anyone on the pipeline can see it.’”

    The influence of microscopic forms and macro photography grounded the Communiverse in natural phenomena.

    The variety in the Communiverse is a contrast to the regimented world on the military base.

    There were no departmental borders, in particular with cinematography. “We had our layout and lighting DPs start on the same day. Derek Williams wouldn’t shoot anything without Jordan Rempel, our lighting DP, seeing it,” Sanii states. “Jordan would drop in lighting and start doing key lighting as Derek’s team was laying out. It wasn’t like you had to hit the render button, wait for the render to come up and go, ‘Oh, my god, it’s dark! I didn’t know that it was nighttime.’” A new term was adopted. “Meredith Homand I pulled the entire crew and leadership into this mental concept that we called the ‘college project.’ For some of us, college was a time when we didn’t have titles and crafts. You begged, borrowed and stole to hit that deadline. So much of our world has become linear in our process that I wanted to break that down to, ‘No. We’re all working together. The scope of this film is too large for us to wait for each other to finish our piece. If this person is slammed, fine. Figure out a different idea to do it with what tools you have.’”

    Directors Domee Shi and Madeline Sharafian are drawn to chubby, exaggerated and cute characters.

    Forgoing the word ‘no’ led to the technology breaking down. “I remember times when crowdsis dressing all of the aliens and because of forgetting to constrain it to the Communiverse, they all show up at the origin, and you’re going, ‘Why is there a whole party going on over there?’” Sanii laughs. “On Elio, it was always forward. There were no rules about locking things down or not installing over the weekend. It was always like, ‘Put it all in, and we’ll deal with it on Monday.’ There would be some funny stuff. We never QC’d something before walking it into the room. Everyone saw how the sausage was made. It was fun and not fun for Harley Jessupbecause sometimes there would be a big thing in the middle screen, and he would say, ‘Is that finished?’ There was no way we could get through this film if we kept trying to fix the thing that broke.”

    An aerial image of Elio as he attempts to get abducted by aliens.

    Part of the design of the Coummuniverse was inspired by Chinese puzzle balls.

    A former visual effects art director at ILM, Harley Jessup found his previous experiences on projects like Innerspace to be helpful on Elio. “I liked that the directors wanted to build on the effects films from the 1980s and early 1990s,” reflects Jessup. “I was there and part of that. It was fun to look back. At the time, the techniques were all practical, matte paintings and miniatures, which are fun to work with, but without the safety net of CG. One thing Dennis Murenwas keen on, was how people see things like the natural phenomenon you might see in a microscopic or macro photography form. We were using that. I was looking at the mothership of Close Encounters of the Third Kind, which Dennis shot when he was a young artist. It was nice to be able to bring all of that history to this film.”
    Earth was impacted by a comment made by Pete Docter. “He said, ‘The military base should feel like a parking lot,” Jessup reveals. “You should know why Elio wants to be anywhere else. And the Communiverse needs to be inviting. We built a lot of contrast into those two worlds. The brutalist architecture on the military base, with its hard edges and heavy horizontal forms close to the earth, needed to be harsh but beautiful in its own way, so we tried for that. The Communiverse would be in contrast and be all curves, translucent surfaces and stained-glass backlit effects. Things were wide open about what it could be because each of the aliens are from a different climate and gravity. There are some buildings that are actually upside down on it, and the whole thing is rotating inside like clockwork. It is hopefully an appealing, fun world. It’s not a dystopian outer space.”

    Exploring various facial expressions for Elio.

    A tough character to get right was Aunt Olga, who struggles to be the guardian of her nephew.

    Character designs of Elio and Glordon. which shows them interacting with each other.

    Architecture was devised to reflect the desired tone for scenes. “In the Grand Assembly Hall where each alien has a desk and booth, the booth is shaped like an eyelid that can close or open,” Jessup explains. “It increases the feeling that they’re evaluating and observing Elio and each of the candidates that have come to join the Communiverse.” A couple of iconic cinematic franchises were avoided for aesthetic reasons. “As much as I love Star Wars and Star Trek, we wanted to be different from those kinds of aliens that are often more humanoid.” Ooooo was the first alien to be designed. “We did Ooooo in collaboration with the effects team, which was small at that time. She was described as a liquid supercomputer. We actually used the wireframe that was turning up and asked, what if it ended up being this network of little lights that are moving around and can express how much she was thinking? Ooooo is Elio’s guide to the Communiverse; her body would deform, so she could become a big screen or reach out and pluck things. Ooooo has an ability like an amoeba to stretch.”
    Flexibility is important when figuring out shot design. “On Elio, we provided the layout department with a rudimentary version of our environments,” states David Luoh, Sets Supervisor. “It might be simple geometry. We’re not worried necessarily about shading, color and material yet. Things are roughly in place but also built in a way that is flexible. As they’re sorting out the camera and testing out staging, they can move elements of the set around. Maybe this architectural piece needs to be shifted or larger or smaller. There was a variation on what was typically expected of set deliveries of environments to our layout department. That bar was lowered to give the layout department something to work with sooner and also with more flexibility. From their work we get context as to how we partner with our art and design department to build and finalize those environments.”

    Regional biomes known as disks are part of the Communiverse. “There are aquatic, lush forest, snow and ice, and hot lava disks,” Luoh remarks. “The hot disk is grounded in the desert, volcanic rock and lava, while for the lush disk we looked at interesting plant life found in the world around us.” The Communiverse is a complex geometric form. “We wanted these natural arrangements of alien districts, and that was all happening on this twisting and curving terrain in a way that made traditional dressing approaches clunky. Oftentimes, you’re putting something on the ground or mounted, and the ground is always facing upward. But if you have to dress the wall or ceiling, it becomes a lot more difficult to manipulate and place on something with that dynamic and shape. You have stuff that casts light, is see-through and shifting over time. Ooooo is a living character that looks like electronic circuitry that is constantly moving, and we also have that element in the walls, floors and bubble transport that carry the characters around.”
    Sets were adjusted throughout the production. “We try to anticipate situations that might come up,” Luoh states. “What if we have a series of shots where you’re getting closer and closer to the Communiverse and you have to bridge the distance between your hero and set extension background? There is a partnership with story, but certainly with our layout camera staging department. As we see shots come out of their work, we know where we need to spend the time to figure out, are we going to see the distant hills in this way? We’re not going to build it until we know because it can be labor-intensive. There is a responsiveness to what we are starting to see as shots get made.” Combining the familiar into something unfamiliar was a process. “There was this curation of being inspired by existing alien sci-fi depictions, but also reaching back into biological phenomena or interesting material because we wanted to ground a lot of those visual elements and ideas in something that people could intuitively grasp on to, even if they were combined or arranged in a way that is surprising, strange and delightful.”
    #discovering #elio
    DISCOVERING ELIO
    By TREVOR HOGG Images courtesy of Pixar. The character design of Glordon is based on a tardigrade, which is a microscopic water bear. Rather than look at the unknown as something to be feared, Pixar has decided to do some wish fulfillment with Elio, where a lonely adolescent astrophile gets abducted by aliens and is mistaken as the leader of Earth. Originally conceived and directed by Adrian Molina, the coming-of-age science fiction adventure was shepherded by Domee Shi and Madeline Sharafian, who had previously worked together on Turning Red. “Space is often seen as dark, mysterious and scary, but there is also so much hope, wonder and curiosity,” notes Shi, director of Elio. “It’s like anything is ‘out there.’ Elio captures how a lot of us feel at different points of our lives, when we were kids like him, or even now wanting to be off of this current planet because it’s just too much. For Elio, it’s a rescue. I feel that there’s something so universal about that feeling of wanting to be taken away and taken care of. To know that you’re not alone and somebody chose you and picked you up.” The character design of Glordon is based on a tardigrade, which is a microscopic water bear. There is a stark contrast between how Earth and the alien world, known as the Communiverse, are portrayed. “The more we worked with the animators on Glordon and Helix, they began to realize that Domee and I respond positively when thosecharacters are exaggerated, made cute, round and chubby,” states Sharafian, director of Elio. “That automatically started to differentiate the way the Earth and space feel.” A certain question had to be answered when designing the United Nations-inspired Communiverse. “It was coming from a place of this lonely kid who feels like no one wants him on Earth,” Shi explains. “What would be heaven and paradise for him? The Communiverse was built around that idea.” A sense of belonging is an important theme. “It’s also inspired by Adrian Molina’s backstory, and our backstories too, of going to animation college,” Sharafian remarks. “For the first time, we said, ‘This is where everybody like me is!’” Green is the thematic color for Elio. Visual effects are an important storytelling tool. “Especially, for our movie, which is about this boy going to this crazy incredible world of the Communiverse,” Shi observes. “It has to be dazzling and look spectacular on the big screen and feel like paradise. Elio is such a visual feast, and you do feel like, ‘I want to stay here no matter what. I can’t believe that this place even exists.’ Visual effects are a powerful tool to help you feel what the characters are feeling.” A wishlist became a reality for the directors. “Claudia Chung Saniigave Domee and me carte blanche for wish fulfillment for ourselves,” Sharafian remarks. “What do you want Elio’s outfit in space to look like? It was a difficult costume, but now when we watch the movie, we’re all so proud of it. Elio looks fabulous, and he’s so happy to be wearing that outfit. Who would want to take that off?” The Communiverse was meant to feel like a place that a child would love to visit and explore. Methodology rather than technology went through the biggest change for the production. “The Communiverse is super complex and has lots of moving pieces. But there’s not much CG can’t do anymore,” notes Claudia Chung Sanii. “Elemental did effects characters. We did long curly hair, dresses, capes, water and fire. What we hadn’t done before was be a part of that design process. How do we get lighting into layout? How do we see the shaders in animation in layout? The tools department was working on a software called Luna which does that. I went to the tools department and asked, ‘Can I play around with it?’ They were like, ‘Okay. But it’s not ready yet.’ Tools will basically be bringing RenderMan and an interactive lighting workflow to the pipeline across all of these DCCs. Because we light in Katana, you can’t get back upstream. The conceit that we were dipping our toe in on Elio was, ‘Whatever you do in lighting, anyone on the pipeline can see it.’” The influence of microscopic forms and macro photography grounded the Communiverse in natural phenomena. The variety in the Communiverse is a contrast to the regimented world on the military base. There were no departmental borders, in particular with cinematography. “We had our layout and lighting DPs start on the same day. Derek Williams wouldn’t shoot anything without Jordan Rempel, our lighting DP, seeing it,” Sanii states. “Jordan would drop in lighting and start doing key lighting as Derek’s team was laying out. It wasn’t like you had to hit the render button, wait for the render to come up and go, ‘Oh, my god, it’s dark! I didn’t know that it was nighttime.’” A new term was adopted. “Meredith Homand I pulled the entire crew and leadership into this mental concept that we called the ‘college project.’ For some of us, college was a time when we didn’t have titles and crafts. You begged, borrowed and stole to hit that deadline. So much of our world has become linear in our process that I wanted to break that down to, ‘No. We’re all working together. The scope of this film is too large for us to wait for each other to finish our piece. If this person is slammed, fine. Figure out a different idea to do it with what tools you have.’” Directors Domee Shi and Madeline Sharafian are drawn to chubby, exaggerated and cute characters. Forgoing the word ‘no’ led to the technology breaking down. “I remember times when crowdsis dressing all of the aliens and because of forgetting to constrain it to the Communiverse, they all show up at the origin, and you’re going, ‘Why is there a whole party going on over there?’” Sanii laughs. “On Elio, it was always forward. There were no rules about locking things down or not installing over the weekend. It was always like, ‘Put it all in, and we’ll deal with it on Monday.’ There would be some funny stuff. We never QC’d something before walking it into the room. Everyone saw how the sausage was made. It was fun and not fun for Harley Jessupbecause sometimes there would be a big thing in the middle screen, and he would say, ‘Is that finished?’ There was no way we could get through this film if we kept trying to fix the thing that broke.” An aerial image of Elio as he attempts to get abducted by aliens. Part of the design of the Coummuniverse was inspired by Chinese puzzle balls. A former visual effects art director at ILM, Harley Jessup found his previous experiences on projects like Innerspace to be helpful on Elio. “I liked that the directors wanted to build on the effects films from the 1980s and early 1990s,” reflects Jessup. “I was there and part of that. It was fun to look back. At the time, the techniques were all practical, matte paintings and miniatures, which are fun to work with, but without the safety net of CG. One thing Dennis Murenwas keen on, was how people see things like the natural phenomenon you might see in a microscopic or macro photography form. We were using that. I was looking at the mothership of Close Encounters of the Third Kind, which Dennis shot when he was a young artist. It was nice to be able to bring all of that history to this film.” Earth was impacted by a comment made by Pete Docter. “He said, ‘The military base should feel like a parking lot,” Jessup reveals. “You should know why Elio wants to be anywhere else. And the Communiverse needs to be inviting. We built a lot of contrast into those two worlds. The brutalist architecture on the military base, with its hard edges and heavy horizontal forms close to the earth, needed to be harsh but beautiful in its own way, so we tried for that. The Communiverse would be in contrast and be all curves, translucent surfaces and stained-glass backlit effects. Things were wide open about what it could be because each of the aliens are from a different climate and gravity. There are some buildings that are actually upside down on it, and the whole thing is rotating inside like clockwork. It is hopefully an appealing, fun world. It’s not a dystopian outer space.” Exploring various facial expressions for Elio. A tough character to get right was Aunt Olga, who struggles to be the guardian of her nephew. Character designs of Elio and Glordon. which shows them interacting with each other. Architecture was devised to reflect the desired tone for scenes. “In the Grand Assembly Hall where each alien has a desk and booth, the booth is shaped like an eyelid that can close or open,” Jessup explains. “It increases the feeling that they’re evaluating and observing Elio and each of the candidates that have come to join the Communiverse.” A couple of iconic cinematic franchises were avoided for aesthetic reasons. “As much as I love Star Wars and Star Trek, we wanted to be different from those kinds of aliens that are often more humanoid.” Ooooo was the first alien to be designed. “We did Ooooo in collaboration with the effects team, which was small at that time. She was described as a liquid supercomputer. We actually used the wireframe that was turning up and asked, what if it ended up being this network of little lights that are moving around and can express how much she was thinking? Ooooo is Elio’s guide to the Communiverse; her body would deform, so she could become a big screen or reach out and pluck things. Ooooo has an ability like an amoeba to stretch.” Flexibility is important when figuring out shot design. “On Elio, we provided the layout department with a rudimentary version of our environments,” states David Luoh, Sets Supervisor. “It might be simple geometry. We’re not worried necessarily about shading, color and material yet. Things are roughly in place but also built in a way that is flexible. As they’re sorting out the camera and testing out staging, they can move elements of the set around. Maybe this architectural piece needs to be shifted or larger or smaller. There was a variation on what was typically expected of set deliveries of environments to our layout department. That bar was lowered to give the layout department something to work with sooner and also with more flexibility. From their work we get context as to how we partner with our art and design department to build and finalize those environments.” Regional biomes known as disks are part of the Communiverse. “There are aquatic, lush forest, snow and ice, and hot lava disks,” Luoh remarks. “The hot disk is grounded in the desert, volcanic rock and lava, while for the lush disk we looked at interesting plant life found in the world around us.” The Communiverse is a complex geometric form. “We wanted these natural arrangements of alien districts, and that was all happening on this twisting and curving terrain in a way that made traditional dressing approaches clunky. Oftentimes, you’re putting something on the ground or mounted, and the ground is always facing upward. But if you have to dress the wall or ceiling, it becomes a lot more difficult to manipulate and place on something with that dynamic and shape. You have stuff that casts light, is see-through and shifting over time. Ooooo is a living character that looks like electronic circuitry that is constantly moving, and we also have that element in the walls, floors and bubble transport that carry the characters around.” Sets were adjusted throughout the production. “We try to anticipate situations that might come up,” Luoh states. “What if we have a series of shots where you’re getting closer and closer to the Communiverse and you have to bridge the distance between your hero and set extension background? There is a partnership with story, but certainly with our layout camera staging department. As we see shots come out of their work, we know where we need to spend the time to figure out, are we going to see the distant hills in this way? We’re not going to build it until we know because it can be labor-intensive. There is a responsiveness to what we are starting to see as shots get made.” Combining the familiar into something unfamiliar was a process. “There was this curation of being inspired by existing alien sci-fi depictions, but also reaching back into biological phenomena or interesting material because we wanted to ground a lot of those visual elements and ideas in something that people could intuitively grasp on to, even if they were combined or arranged in a way that is surprising, strange and delightful.” #discovering #elio
    WWW.VFXVOICE.COM
    DISCOVERING ELIO
    By TREVOR HOGG Images courtesy of Pixar. The character design of Glordon is based on a tardigrade, which is a microscopic water bear. Rather than look at the unknown as something to be feared, Pixar has decided to do some wish fulfillment with Elio, where a lonely adolescent astrophile gets abducted by aliens and is mistaken as the leader of Earth. Originally conceived and directed by Adrian Molina, the coming-of-age science fiction adventure was shepherded by Domee Shi and Madeline Sharafian, who had previously worked together on Turning Red. “Space is often seen as dark, mysterious and scary, but there is also so much hope, wonder and curiosity,” notes Shi, director of Elio. “It’s like anything is ‘out there.’ Elio captures how a lot of us feel at different points of our lives, when we were kids like him, or even now wanting to be off of this current planet because it’s just too much. For Elio, it’s a rescue. I feel that there’s something so universal about that feeling of wanting to be taken away and taken care of. To know that you’re not alone and somebody chose you and picked you up.” The character design of Glordon is based on a tardigrade, which is a microscopic water bear. There is a stark contrast between how Earth and the alien world, known as the Communiverse, are portrayed. “The more we worked with the animators on Glordon and Helix, they began to realize that Domee and I respond positively when those [alien] characters are exaggerated, made cute, round and chubby,” states Sharafian, director of Elio. “That automatically started to differentiate the way the Earth and space feel.” A certain question had to be answered when designing the United Nations-inspired Communiverse. “It was coming from a place of this lonely kid who feels like no one wants him on Earth,” Shi explains. “What would be heaven and paradise for him? The Communiverse was built around that idea.” A sense of belonging is an important theme. “It’s also inspired by Adrian Molina’s backstory, and our backstories too, of going to animation college,” Sharafian remarks. “For the first time, we said, ‘This is where everybody like me is!’” Green is the thematic color for Elio. Visual effects are an important storytelling tool. “Especially, for our movie, which is about this boy going to this crazy incredible world of the Communiverse,” Shi observes. “It has to be dazzling and look spectacular on the big screen and feel like paradise. Elio is such a visual feast, and you do feel like, ‘I want to stay here no matter what. I can’t believe that this place even exists.’ Visual effects are a powerful tool to help you feel what the characters are feeling.” A wishlist became a reality for the directors. “Claudia Chung Sanii [Visual Effects Supervisor] gave Domee and me carte blanche for wish fulfillment for ourselves,” Sharafian remarks. “What do you want Elio’s outfit in space to look like? It was a difficult costume, but now when we watch the movie, we’re all so proud of it. Elio looks fabulous, and he’s so happy to be wearing that outfit. Who would want to take that off?” The Communiverse was meant to feel like a place that a child would love to visit and explore. Methodology rather than technology went through the biggest change for the production. “The Communiverse is super complex and has lots of moving pieces. But there’s not much CG can’t do anymore,” notes Claudia Chung Sanii. “Elemental did effects characters. We did long curly hair, dresses, capes, water and fire. What we hadn’t done before was be a part of that design process. How do we get lighting into layout? How do we see the shaders in animation in layout? The tools department was working on a software called Luna which does that. I went to the tools department and asked, ‘Can I play around with it?’ They were like, ‘Okay. But it’s not ready yet.’ Tools will basically be bringing RenderMan and an interactive lighting workflow to the pipeline across all of these DCCs. Because we light in Katana, you can’t get back upstream. The conceit that we were dipping our toe in on Elio was, ‘Whatever you do in lighting, anyone on the pipeline can see it.’” The influence of microscopic forms and macro photography grounded the Communiverse in natural phenomena. The variety in the Communiverse is a contrast to the regimented world on the military base. There were no departmental borders, in particular with cinematography. “We had our layout and lighting DPs start on the same day. Derek Williams wouldn’t shoot anything without Jordan Rempel, our lighting DP, seeing it,” Sanii states. “Jordan would drop in lighting and start doing key lighting as Derek’s team was laying out. It wasn’t like you had to hit the render button, wait for the render to come up and go, ‘Oh, my god, it’s dark! I didn’t know that it was nighttime.’” A new term was adopted. “Meredith Hom [Production Manager] and I pulled the entire crew and leadership into this mental concept that we called the ‘college project.’ For some of us, college was a time when we didn’t have titles and crafts. You begged, borrowed and stole to hit that deadline. So much of our world has become linear in our process that I wanted to break that down to, ‘No. We’re all working together. The scope of this film is too large for us to wait for each other to finish our piece. If this person is slammed, fine. Figure out a different idea to do it with what tools you have.’” Directors Domee Shi and Madeline Sharafian are drawn to chubby, exaggerated and cute characters. Forgoing the word ‘no’ led to the technology breaking down. “I remember times when crowds [department] is dressing all of the aliens and because of forgetting to constrain it to the Communiverse, they all show up at the origin, and you’re going, ‘Why is there a whole party going on over there?’” Sanii laughs. “On Elio, it was always forward. There were no rules about locking things down or not installing over the weekend. It was always like, ‘Put it all in, and we’ll deal with it on Monday.’ There would be some funny stuff. We never QC’d something before walking it into the room. Everyone saw how the sausage was made. It was fun and not fun for Harley Jessup [Production Designer] because sometimes there would be a big thing in the middle screen, and he would say, ‘Is that finished?’ There was no way we could get through this film if we kept trying to fix the thing that broke.” An aerial image of Elio as he attempts to get abducted by aliens. Part of the design of the Coummuniverse was inspired by Chinese puzzle balls. A former visual effects art director at ILM, Harley Jessup found his previous experiences on projects like Innerspace to be helpful on Elio. “I liked that the directors wanted to build on the effects films from the 1980s and early 1990s,” reflects Jessup. “I was there and part of that. It was fun to look back. At the time, the techniques were all practical, matte paintings and miniatures, which are fun to work with, but without the safety net of CG. One thing Dennis Muren [VES] was keen on, was how people see things like the natural phenomenon you might see in a microscopic or macro photography form. We were using that. I was looking at the mothership of Close Encounters of the Third Kind, which Dennis shot when he was a young artist. It was nice to be able to bring all of that history to this film.” Earth was impacted by a comment made by Pete Docter (CCO, Pixar). “He said, ‘The military base should feel like a parking lot,” Jessup reveals. “You should know why Elio wants to be anywhere else. And the Communiverse needs to be inviting. We built a lot of contrast into those two worlds. The brutalist architecture on the military base, with its hard edges and heavy horizontal forms close to the earth, needed to be harsh but beautiful in its own way, so we tried for that. The Communiverse would be in contrast and be all curves, translucent surfaces and stained-glass backlit effects. Things were wide open about what it could be because each of the aliens are from a different climate and gravity. There are some buildings that are actually upside down on it, and the whole thing is rotating inside like clockwork. It is hopefully an appealing, fun world. It’s not a dystopian outer space.” Exploring various facial expressions for Elio. A tough character to get right was Aunt Olga, who struggles to be the guardian of her nephew. Character designs of Elio and Glordon. which shows them interacting with each other. Architecture was devised to reflect the desired tone for scenes. “In the Grand Assembly Hall where each alien has a desk and booth, the booth is shaped like an eyelid that can close or open,” Jessup explains. “It increases the feeling that they’re evaluating and observing Elio and each of the candidates that have come to join the Communiverse.” A couple of iconic cinematic franchises were avoided for aesthetic reasons. “As much as I love Star Wars and Star Trek, we wanted to be different from those kinds of aliens that are often more humanoid.” Ooooo was the first alien to be designed. “We did Ooooo in collaboration with the effects team, which was small at that time. She was described as a liquid supercomputer. We actually used the wireframe that was turning up and asked, what if it ended up being this network of little lights that are moving around and can express how much she was thinking? Ooooo is Elio’s guide to the Communiverse; her body would deform, so she could become a big screen or reach out and pluck things. Ooooo has an ability like an amoeba to stretch.” Flexibility is important when figuring out shot design. “On Elio, we provided the layout department with a rudimentary version of our environments,” states David Luoh, Sets Supervisor. “It might be simple geometry. We’re not worried necessarily about shading, color and material yet. Things are roughly in place but also built in a way that is flexible. As they’re sorting out the camera and testing out staging, they can move elements of the set around. Maybe this architectural piece needs to be shifted or larger or smaller. There was a variation on what was typically expected of set deliveries of environments to our layout department. That bar was lowered to give the layout department something to work with sooner and also with more flexibility. From their work we get context as to how we partner with our art and design department to build and finalize those environments.” Regional biomes known as disks are part of the Communiverse. “There are aquatic, lush forest, snow and ice, and hot lava disks,” Luoh remarks. “The hot disk is grounded in the desert, volcanic rock and lava, while for the lush disk we looked at interesting plant life found in the world around us.” The Communiverse is a complex geometric form. “We wanted these natural arrangements of alien districts, and that was all happening on this twisting and curving terrain in a way that made traditional dressing approaches clunky. Oftentimes, you’re putting something on the ground or mounted, and the ground is always facing upward. But if you have to dress the wall or ceiling, it becomes a lot more difficult to manipulate and place on something with that dynamic and shape. You have stuff that casts light, is see-through and shifting over time. Ooooo is a living character that looks like electronic circuitry that is constantly moving, and we also have that element in the walls, floors and bubble transport that carry the characters around.” Sets were adjusted throughout the production. “We try to anticipate situations that might come up,” Luoh states. “What if we have a series of shots where you’re getting closer and closer to the Communiverse and you have to bridge the distance between your hero and set extension background? There is a partnership with story, but certainly with our layout camera staging department. As we see shots come out of their work, we know where we need to spend the time to figure out, are we going to see the distant hills in this way? We’re not going to build it until we know because it can be labor-intensive. There is a responsiveness to what we are starting to see as shots get made.” Combining the familiar into something unfamiliar was a process. “There was this curation of being inspired by existing alien sci-fi depictions, but also reaching back into biological phenomena or interesting material because we wanted to ground a lot of those visual elements and ideas in something that people could intuitively grasp on to, even if they were combined or arranged in a way that is surprising, strange and delightful.”
    0 Commenti 0 condivisioni