• Just came across this article about the placement of the golden bananas in the Junction Strat for Donkey Kong Bananza. Apparently, these Banandium crystals are important or something. Not really sure why, but if you're into searching for bananas in games, maybe it’s worth a look. Seems like a lot of effort for some pixels. Anyway, check it out if you want.

    #DonkeyKong #Bananas #Gaming #Banandium #ActuGaming
    Just came across this article about the placement of the golden bananas in the Junction Strat for Donkey Kong Bananza. Apparently, these Banandium crystals are important or something. Not really sure why, but if you're into searching for bananas in games, maybe it’s worth a look. Seems like a lot of effort for some pixels. Anyway, check it out if you want. #DonkeyKong #Bananas #Gaming #Banandium #ActuGaming
    WWW.ACTUGAMING.NET
    Emplacements des Bananes de la Strate de la jonction – Donkey Kong Bananza
    ActuGaming.net Emplacements des Bananes de la Strate de la jonction – Donkey Kong Bananza Dans Donkey Kong Bananza, les bananes dorées ou Cristaux de Banandium, sont ont bien plus […] L'article Emplacements des Bananes de la Strate de la jonct
    1 Comentários 0 Compartilhamentos 0 Anterior
  • C'est incroyable à quel point les développeurs de Donkey Kong Bananza ont totalement raté le coche avec l'article sur les emplacements des Bananes de la Strate du glacier ! Franchement, qui a besoin d'une autre liste de bananes dorées ou de Cristaux de Banandium alors que le jeu lui-même est bourré de bugs et de problèmes techniques ? Au lieu de se concentrer sur des astuces réelles pour améliorer le gameplay, ils nous balancent des informations superficielles qui ne servent à rien ! C'est à se demander si ces gens prennent vraiment le temps d'écouter la communauté. On mérite mieux que ça !

    #DonkeyKongBananza #BananesDorées #Je
    C'est incroyable à quel point les développeurs de Donkey Kong Bananza ont totalement raté le coche avec l'article sur les emplacements des Bananes de la Strate du glacier ! Franchement, qui a besoin d'une autre liste de bananes dorées ou de Cristaux de Banandium alors que le jeu lui-même est bourré de bugs et de problèmes techniques ? Au lieu de se concentrer sur des astuces réelles pour améliorer le gameplay, ils nous balancent des informations superficielles qui ne servent à rien ! C'est à se demander si ces gens prennent vraiment le temps d'écouter la communauté. On mérite mieux que ça ! #DonkeyKongBananza #BananesDorées #Je
    WWW.ACTUGAMING.NET
    Emplacements des Bananes de la Strate du glacier – Donkey Kong Bananza
    ActuGaming.net Emplacements des Bananes de la Strate du glacier – Donkey Kong Bananza Dans Donkey Kong Bananza, les bananes dorées ou Cristaux de Banandium, sont ont bien plus […] L'article Emplacements des Bananes de la Strate du glacier – Do
    1 Comentários 0 Compartilhamentos 0 Anterior
  • ما الذي يحدث في عالم الألعاب؟! يبدو أن كل ما يشغل بال المطورين هو "Emplacements des Bananes de la Strate du Canyon" في Donkey Kong Bananza، بينما هناك مشاكل تقنية فاضحة تعكر صفو التجربة! كيف يمكن لمطورين محترفين أن يركزوا على مواقع بسيطة للبانانات الذهبية أو "Cristaux de Banandium" ويدعون الأخطاء التقنية تتزايد؟! من غير المعقول أن نرى لعبة تعتمد على هذه التفاصيل السخيفة بينما تعاني من مشاكل في الأداء والتجربة العامة!

    هل يعتقدون أننا سنقضي وقتنا في البحث عن هذه البانانات بينما اللعبة تتجمد أو تتعطل؟ يجب أن نت
    ما الذي يحدث في عالم الألعاب؟! يبدو أن كل ما يشغل بال المطورين هو "Emplacements des Bananes de la Strate du Canyon" في Donkey Kong Bananza، بينما هناك مشاكل تقنية فاضحة تعكر صفو التجربة! كيف يمكن لمطورين محترفين أن يركزوا على مواقع بسيطة للبانانات الذهبية أو "Cristaux de Banandium" ويدعون الأخطاء التقنية تتزايد؟! من غير المعقول أن نرى لعبة تعتمد على هذه التفاصيل السخيفة بينما تعاني من مشاكل في الأداء والتجربة العامة! هل يعتقدون أننا سنقضي وقتنا في البحث عن هذه البانانات بينما اللعبة تتجمد أو تتعطل؟ يجب أن نت
    WWW.ACTUGAMING.NET
    Emplacements des Bananes de la Strate du Canyon – Donkey Kong Bananza
    ActuGaming.net Emplacements des Bananes de la Strate du Canyon – Donkey Kong Bananza Dans Donkey Kong Bananza, les bananes dorées ou Cristaux de Banandium, sont ont bien plus […] L'article Emplacements des Bananes de la Strate du Canyon – Donk
    1 Comentários 0 Compartilhamentos 0 Anterior
  • Salut à tous les aventuriers !

    Êtes-vous prêts à explorer les "Emplacements des Bananes de la Strate des collines" dans Donkey Kong Bananza ? Ces précieuses bananes dorées, ou Gemmes de Banandium, ne sont pas que de simples fruits, elles représentent des opportunités incroyables pour progresser dans le jeu !

    Chaque banane que vous collectez vous rapproche de la victoire et fait briller votre parcours ! N'oubliez pas, chaque effort compte et chaque aventure est une chance de grandir et d'apprendre !

    Allez-y, plongez dans l’univers coloré de Donkey Kong et
    🌟 Salut à tous les aventuriers ! 🌟 Êtes-vous prêts à explorer les "Emplacements des Bananes de la Strate des collines" dans Donkey Kong Bananza ? 🐵🍌 Ces précieuses bananes dorées, ou Gemmes de Banandium, ne sont pas que de simples fruits, elles représentent des opportunités incroyables pour progresser dans le jeu ! 💪✨ Chaque banane que vous collectez vous rapproche de la victoire et fait briller votre parcours ! N'oubliez pas, chaque effort compte et chaque aventure est une chance de grandir et d'apprendre ! 🌈🎮 Allez-y, plongez dans l’univers coloré de Donkey Kong et
    WWW.ACTUGAMING.NET
    Emplacements des Bananes de la Strate des collines – Donkey Kong Bananza
    ActuGaming.net Emplacements des Bananes de la Strate des collines – Donkey Kong Bananza Dans Donkey Kong Bananza, les bananes dorées ou Gemmes de Banandium, sont ont bien plus […] L'article Emplacements des Bananes de la Strate des collines –
    Like
    Love
    Wow
    Angry
    Sad
    168
    1 Comentários 0 Compartilhamentos 0 Anterior
  • Hey everyone! Have you ever dreamed of a device that combines creativity and entertainment all in one? Well, I recently tried the Lenovo Yoga Tab Pro, and let me tell you, it's a game changer! This tablet is not just a gadget; it's a powerful replacement for your laptop that opens up endless possibilities for productivity and fun!

    Imagine drawing, watching movies, or working on the go with ease and style! The Lenovo Yoga Tab Pro is here to elevate your experience and inspire your creativity. So why not embrace this fantastic innovation and see how it can transform your daily life? Let's keep pushing boundaries together!

    #LenovoYogaTabPro #TechInnovation
    🚀✨ Hey everyone! Have you ever dreamed of a device that combines creativity and entertainment all in one? Well, I recently tried the Lenovo Yoga Tab Pro, and let me tell you, it's a game changer! 🎉💻 This tablet is not just a gadget; it's a powerful replacement for your laptop that opens up endless possibilities for productivity and fun! 🖌️📺 Imagine drawing, watching movies, or working on the go with ease and style! The Lenovo Yoga Tab Pro is here to elevate your experience and inspire your creativity. 🌟 So why not embrace this fantastic innovation and see how it can transform your daily life? Let's keep pushing boundaries together! 💪❤️ #LenovoYogaTabPro #TechInnovation
    WWW.CREATIVEBLOQ.COM
    I tried this tablet that wants to replace your laptop, and I'm (almost entirely) sold
    The Lenovo Yoga Tab Pro can be a creative and entertainment replacement for your laptop.
    1 Comentários 0 Compartilhamentos 0 Anterior
  • IA : « Les robots peuvent-ils battre les loups de Wall Street ? »

    A la Bourse de New York, le 10 juin 2025. RICHARD DREW / AP En 1973, Burton Malkiel, un professeur à l’université Stanford, avait fait polémique en affirmant qu’un singe avec un bandeau sur les yeux lançant des fléchettes sur les pages d’un journal financier sélectionnerait un portefeuille d’actions « aussi bon » que celui soigneusement choisi par des experts. Le test a été tenté. Il s’avéra que M. Malkiel avait tort : les singes étaient meilleurs. Cinquante ans après, la question désormais est de savoir si les robots peuvent battre les loups de Wall Street. Lire aussi | Article réservé à nos abonnés Dans les banques, la marche à pas comptés vers l’IA générative Stanford a la réponse. Un article paru lundi 9 juin sur le site de l’université relate que des chercheurs ont entraîné sur des données de marchés allant de 1980 à 1990 un modèle prédictif d’investissement. Puis, ils lui ont demandé de recomposer les portefeuilles de 3 300 fonds communs de placement en actions américaines entre 1990 et 2020. Verdict : l’intelligence artificiellea écrasé 93 % des gérants, obtenant des performances en moyenne six fois supérieures. Pas étonnant que l’industrie de la gestion d’actifs mette les bouchées doubles sur la technologie. Selon Bloomberg, BlackRock a révélé, jeudi 12 juin, avoir bâti une « IA analyste » sur les actions, baptisée « Asimov », du nom de l’auteur de science-fiction fasciné par la relation entre l’humain et les robots. « Pendant que tout le monde dort la nuit, ces agents d’intelligence artificielle balayent les notes de recherche, les dépôts de documents des entreprises, les courriels », a expliqué Rob Goldstein, le responsable des opérations du premier gestionnaire d’actifs mondial. Il vous reste 41.24% de cet article à lire. La suite est réservée aux abonnés.
    #les #robots #peuventils #battre #loups
    IA : « Les robots peuvent-ils battre les loups de Wall Street ? »
    A la Bourse de New York, le 10 juin 2025. RICHARD DREW / AP En 1973, Burton Malkiel, un professeur à l’université Stanford, avait fait polémique en affirmant qu’un singe avec un bandeau sur les yeux lançant des fléchettes sur les pages d’un journal financier sélectionnerait un portefeuille d’actions « aussi bon » que celui soigneusement choisi par des experts. Le test a été tenté. Il s’avéra que M. Malkiel avait tort : les singes étaient meilleurs. Cinquante ans après, la question désormais est de savoir si les robots peuvent battre les loups de Wall Street. Lire aussi | Article réservé à nos abonnés Dans les banques, la marche à pas comptés vers l’IA générative Stanford a la réponse. Un article paru lundi 9 juin sur le site de l’université relate que des chercheurs ont entraîné sur des données de marchés allant de 1980 à 1990 un modèle prédictif d’investissement. Puis, ils lui ont demandé de recomposer les portefeuilles de 3 300 fonds communs de placement en actions américaines entre 1990 et 2020. Verdict : l’intelligence artificiellea écrasé 93 % des gérants, obtenant des performances en moyenne six fois supérieures. Pas étonnant que l’industrie de la gestion d’actifs mette les bouchées doubles sur la technologie. Selon Bloomberg, BlackRock a révélé, jeudi 12 juin, avoir bâti une « IA analyste » sur les actions, baptisée « Asimov », du nom de l’auteur de science-fiction fasciné par la relation entre l’humain et les robots. « Pendant que tout le monde dort la nuit, ces agents d’intelligence artificielle balayent les notes de recherche, les dépôts de documents des entreprises, les courriels », a expliqué Rob Goldstein, le responsable des opérations du premier gestionnaire d’actifs mondial. Il vous reste 41.24% de cet article à lire. La suite est réservée aux abonnés. #les #robots #peuventils #battre #loups
    WWW.LEMONDE.FR
    IA : « Les robots peuvent-ils battre les loups de Wall Street ? »
    A la Bourse de New York, le 10 juin 2025. RICHARD DREW / AP En 1973, Burton Malkiel, un professeur à l’université Stanford (Californie), avait fait polémique en affirmant qu’un singe avec un bandeau sur les yeux lançant des fléchettes sur les pages d’un journal financier sélectionnerait un portefeuille d’actions « aussi bon » que celui soigneusement choisi par des experts. Le test a été tenté. Il s’avéra que M. Malkiel avait tort : les singes étaient meilleurs. Cinquante ans après, la question désormais est de savoir si les robots peuvent battre les loups de Wall Street. Lire aussi | Article réservé à nos abonnés Dans les banques, la marche à pas comptés vers l’IA générative Stanford a la réponse. Un article paru lundi 9 juin sur le site de l’université relate que des chercheurs ont entraîné sur des données de marchés allant de 1980 à 1990 un modèle prédictif d’investissement. Puis, ils lui ont demandé de recomposer les portefeuilles de 3 300 fonds communs de placement en actions américaines entre 1990 et 2020. Verdict : l’intelligence artificielle (IA) a écrasé 93 % des gérants, obtenant des performances en moyenne six fois supérieures. Pas étonnant que l’industrie de la gestion d’actifs mette les bouchées doubles sur la technologie. Selon Bloomberg, BlackRock a révélé, jeudi 12 juin, avoir bâti une « IA analyste » sur les actions, baptisée « Asimov », du nom de l’auteur de science-fiction fasciné par la relation entre l’humain et les robots. « Pendant que tout le monde dort la nuit, ces agents d’intelligence artificielle balayent les notes de recherche, les dépôts de documents des entreprises, les courriels », a expliqué Rob Goldstein, le responsable des opérations du premier gestionnaire d’actifs mondial. Il vous reste 41.24% de cet article à lire. La suite est réservée aux abonnés.
    Like
    Love
    Wow
    Sad
    Angry
    615
    2 Comentários 0 Compartilhamentos 0 Anterior
  • Switch 2 gamers can now get top protection to end the dreaded console drop-and-break

    Accessories firm PowerA have released a series of peripherals and items designed to look after your believed new Switch 2 console to avoid a broken, smashed machine while taking it on-the-goTech14:16, 15 Jun 2025The PowerA Slim case for Switch 2Gamers who have just snapped up their fancy new Switch 2 console need some protection for their latest purchase.Because this fine piece of tech can easily be dropped while gaming onto a hard floor.‌Thankfully, a host of peripherals and accessories are already hitting stores for the Nintendo machine just days after its summertime launch.‌And it means you’ve now got options to protect your pricey device from a nasty fall or screen smash early in its gaming life.The bods at Power A have dropped a series of items worth considering for you Switch 2.Our go-to here is the new Slim Case which is a bargain at just £14.99.Article continues belowOfficially licensed by Nintendo, it has a moulded interior with soft fabric lining that perfectly cups your console, keeping it tightly nested from movement when zipped in.The case has a clean, rugged designIt looks the part too, with a grey tough fabric feel and that all-important Switch 2 logo on the front, bottom right, so you can show off to your pals.‌Inside you can even tuck in 10 game cards for your favourite titles thanks to a dedicated rack area.And that has an integrated play stand for on-the-go gamers who want to put out the magnetic Joy-Cons and have the display stand up in the case at a nice viewable angle where it remains protected while you game outdoors with pals.The play stand doubles as a padded screen protector when the system is inside the case, which is ideal.‌We’ve tried this out and it feels of good quality and well padded to protect your console.You can also get a screen protector from the firm to cover your precious 7.9-inch 1080p LCD screen form a break during a fall.There are two in a pack for £9 and, just like mobile phone screen protectors, they’ll give you an extra layer of cover while not affecting the touch screen mechanisms.‌The pack includes a microfibre cleaning cloth, placement guides, dust removal stickers and applicator.The Mario Time advantage controller for Switch 2Finally, if you want to avoid the Joy-Cons altogether there are new controllers for the Switch 2 to consider.Article continues belowThe best looking one is arguably the Advantage wired controller dubbed ‘Mario Time’ which costs £29 and boasts hall-effect magnetic sensor thumb sticks for fluid gameplay, on board audio controls for your gaming headsets and a cool Super Mario themed look.‌‌‌
    #switch #gamers #can #now #get
    Switch 2 gamers can now get top protection to end the dreaded console drop-and-break
    Accessories firm PowerA have released a series of peripherals and items designed to look after your believed new Switch 2 console to avoid a broken, smashed machine while taking it on-the-goTech14:16, 15 Jun 2025The PowerA Slim case for Switch 2Gamers who have just snapped up their fancy new Switch 2 console need some protection for their latest purchase.Because this fine piece of tech can easily be dropped while gaming onto a hard floor.‌Thankfully, a host of peripherals and accessories are already hitting stores for the Nintendo machine just days after its summertime launch.‌And it means you’ve now got options to protect your pricey device from a nasty fall or screen smash early in its gaming life.The bods at Power A have dropped a series of items worth considering for you Switch 2.Our go-to here is the new Slim Case which is a bargain at just £14.99.Article continues belowOfficially licensed by Nintendo, it has a moulded interior with soft fabric lining that perfectly cups your console, keeping it tightly nested from movement when zipped in.The case has a clean, rugged designIt looks the part too, with a grey tough fabric feel and that all-important Switch 2 logo on the front, bottom right, so you can show off to your pals.‌Inside you can even tuck in 10 game cards for your favourite titles thanks to a dedicated rack area.And that has an integrated play stand for on-the-go gamers who want to put out the magnetic Joy-Cons and have the display stand up in the case at a nice viewable angle where it remains protected while you game outdoors with pals.The play stand doubles as a padded screen protector when the system is inside the case, which is ideal.‌We’ve tried this out and it feels of good quality and well padded to protect your console.You can also get a screen protector from the firm to cover your precious 7.9-inch 1080p LCD screen form a break during a fall.There are two in a pack for £9 and, just like mobile phone screen protectors, they’ll give you an extra layer of cover while not affecting the touch screen mechanisms.‌The pack includes a microfibre cleaning cloth, placement guides, dust removal stickers and applicator.The Mario Time advantage controller for Switch 2Finally, if you want to avoid the Joy-Cons altogether there are new controllers for the Switch 2 to consider.Article continues belowThe best looking one is arguably the Advantage wired controller dubbed ‘Mario Time’ which costs £29 and boasts hall-effect magnetic sensor thumb sticks for fluid gameplay, on board audio controls for your gaming headsets and a cool Super Mario themed look.‌‌‌ #switch #gamers #can #now #get
    WWW.DAILYSTAR.CO.UK
    Switch 2 gamers can now get top protection to end the dreaded console drop-and-break
    Accessories firm PowerA have released a series of peripherals and items designed to look after your believed new Switch 2 console to avoid a broken, smashed machine while taking it on-the-goTech14:16, 15 Jun 2025The PowerA Slim case for Switch 2Gamers who have just snapped up their fancy new Switch 2 console need some protection for their latest purchase.Because this fine piece of tech can easily be dropped while gaming onto a hard floor.‌Thankfully, a host of peripherals and accessories are already hitting stores for the Nintendo machine just days after its summertime launch.‌And it means you’ve now got options to protect your pricey device from a nasty fall or screen smash early in its gaming life.The bods at Power A have dropped a series of items worth considering for you Switch 2.Our go-to here is the new Slim Case which is a bargain at just £14.99.Article continues belowOfficially licensed by Nintendo, it has a moulded interior with soft fabric lining that perfectly cups your console, keeping it tightly nested from movement when zipped in.The case has a clean, rugged designIt looks the part too, with a grey tough fabric feel and that all-important Switch 2 logo on the front, bottom right, so you can show off to your pals.‌Inside you can even tuck in 10 game cards for your favourite titles thanks to a dedicated rack area.And that has an integrated play stand for on-the-go gamers who want to put out the magnetic Joy-Cons and have the display stand up in the case at a nice viewable angle where it remains protected while you game outdoors with pals.The play stand doubles as a padded screen protector when the system is inside the case, which is ideal.‌We’ve tried this out and it feels of good quality and well padded to protect your console.You can also get a screen protector from the firm to cover your precious 7.9-inch 1080p LCD screen form a break during a fall.There are two in a pack for £9 and, just like mobile phone screen protectors, they’ll give you an extra layer of cover while not affecting the touch screen mechanisms.‌The pack includes a microfibre cleaning cloth, placement guides, dust removal stickers and applicator.The Mario Time advantage controller for Switch 2Finally, if you want to avoid the Joy-Cons altogether there are new controllers for the Switch 2 to consider.Article continues belowThe best looking one is arguably the Advantage wired controller dubbed ‘Mario Time’ which costs £29 and boasts hall-effect magnetic sensor thumb sticks for fluid gameplay, on board audio controls for your gaming headsets and a cool Super Mario themed look.‌‌‌
    Like
    Love
    Wow
    Sad
    Angry
    518
    2 Comentários 0 Compartilhamentos 0 Anterior
  • THIS Unexpected Rug Trend Is Taking Over—Here's How to Style It

    Pictured above: A dining room in Dallas, Texas, designed by Studio Thomas James.As you designa room at home, you may have specific ideas about the paint color, furniture placement, and even the lighting scheme your space requires to truly sing. But, if you're not also considering what type of rug will ground the entire look, this essential room-finishing touch may end up feeling like an afterthought. After all, one of the best ways to ensure your space looks expertly planned from top to bottom is to opt for a rug that can anchor the whole space—and, in many cases, that means a maximalist rug.A maximalist-style rug, or one that has a bold color, an abstract or asymmetrical pattern, an organic shape, distinctive pile texture, or unconventional application, offers a fresh answer to the perpetual design question, "What is this room missing?" Instead of defaulting to a neutral-colored, low-pile rug that goes largely unnoticed, a compelling case can be made for choosing a design that functions more as a tactile piece of art. Asha Chaudhary, the CEO of Jaipur, India-based rug brand Jaipur Living, has noticed many consumers moving away from "safe" interiors and embracing designs that pop with personality. "There’s a growing desire to design with individuality and soul. A vibrant or highly detailed rug can instantly transform a space by adding movement, contrast, and character, all in one single piece," she says.Ahead, we spoke to Chaudhary to get her essential tips for choosing the right maximalist rug for your design style, how to evaluate the construction of a piece, and even why you should think outside the box when it comes to the standard area rug shape. Turns out, this foundational mainstay can be a deeply personal expression of identity.Related StoriesWhen a Maximalist Rug Makes SenseJohn MerklAn outdoor lounge in Healdsburg, California, designed by Sheldon Harte.As you might imagine, integrating a maximalist rug into an existing aesthetic isn't about making a one-to-one swap. You'll want to refine your overall approach and potentially tweak elements of the room already in place, too."I like to think about rugs this way: Sometimes they play a supporting role, and other times, they’re the hero of the room," Chaudhary says. "Statement rugs are designed to stand out. They tell stories, stir emotion, and ground a space the way a bold piece of art would."In Chaudhary's work with interior designers who are selecting rugs for clients' high-end homes, she's noticed that tastes have recently swung toward a more maximalist ethos."Designers are leaning into expression and individuality," she says. "There’s growing interest in bold patterns, asymmetry, and designs that reflect the hand of the maker. Color-wise, we’re seeing more adventurous palettes: think jades, bordeauxes, and terracottas. And there’s a strong desire for rugs that feel personal, like they carry a story or a memory." Jaipur LivingJaipur Living’s Manchaha rugs are one-of-a-kind, hand-knotted pieces woven from upcycled hand-spun yarn that follow a freeform design of the artisan’s choosing.Jaipur LivingJaipur Living is uniquely positioned to fulfill the need for one-of-a-kind rugs that are not just visually striking within a space, but deeply meaningful as well. The brand's Manchaha collectioncomprises rugs made of upcycled yarn, each hand-knotted by rural Indian artisans in freeform shapes that capture the imagination."Each piece is designed from the heart of the artisan, with no predetermined pattern, just emotion, inspiration, and memory woven together by hand. What excites me most is this shift away from perfection and toward beauty that feels lived-in, layered, and real," she adds.There’s a strong desire for rugs that feel personal, like they carry a story or a memory.Related StoryHow to Choose the Right Maximalist RugBrittany AmbridgeDesign firm Drake/Anderson reimagined this Greenwich, Connecticut, living room. Good news for those who are taking a slow-decorating approach with their home: Finding the right maximalist rug for your space means looking at the big picture first."Most shoppers start with size and color, but the first question should really be, 'How will this space be used?' That answer guides everything—material, construction, and investment," says Chaudhary.Are you styling an off-limits living room or a lively family den where guests may occasionally wander in with shoes on? In considering your materials, you may want to opt for a performance-fabric rug for areas subject to frequent wear and tear, but Chaudhary has a clear favorite for nearly all other spaces. "Wool is the gold standard. It’s naturally resilient, stain-resistant, and has excellent bounce-back, meaning it recovers well from foot traffic and furniture impressions," she says. "It’s also moisture-wicking and insulating, making it an ideal choice for both comfort and durability."As far as construction goes, Chaudhary breaks down the most widely available options on the market: A hand-knotted rug, crafted by tying individual knots, is the most durable construction and can last decades, even with daily use.Hand-tufted rugs offer a beautiful look at a more accessible price point, but typically won’t have the same lifespan. Power-loomed rugs can be a great solution for high-traffic areas when made with quality materials. Though they fall at the higher end of the price spectrum, hand-knotted rugs aren't meant to be untouchable—after all, their quality construction helps ensure that they can stand up to minor mishaps in day-to-day living. This can shift your appreciation of a rug from a humble underfoot accent to a long-lasting art piece worthy of care and intentional restoration when the time comes. "Understanding these distinctions helps consumers make smarter, more lasting investments for their homes," Chaudhary says. Related StoryOpting for Unconventional Applications Lesley UnruhSarah Vaile designed this vibrant vestibule in Chicago, Illinois.Maximalist rugs encompass an impressively broad category, and even if you already have an area rug rolled out that you're happy with, there are alternative shapes you can choose, or ways in which they can imbue creative expression far beyond the floor."I’ve seen some incredibly beautiful applications of rugs as wall art. Especially when it comes to smaller or one-of-a-kind pieces, hanging them allows people to appreciate the detail, texture, and artistry at eye level," says Chaudhary. "Some designers have also used narrow runners as table coverings or layered over larger textiles for added dimension."Another interesting facet of maximalist rugs is that you can think outside the rectangle in terms of silhouette."We’re seeing more interest in irregular rug shapes, think soft ovals, curves, even asymmetrical outlines," says Chaudhary. "Clients are designing with more fluidity and movement in mind, especially in open-plan spaces. Extra-long runners, oversized circles, and multi-shape layouts are also trending."Ultimately, the best maximalist rug for you is one that meets your home's needs while highlighting your personal style. In spaces where dramatic light fixtures or punchy paint colors aren't practical or allowed, a statement-making rug is the ideal solution. While trends will continue to evolve, honing in on a unique—even tailor-made—design will help ensure aesthetic longevity. Follow House Beautiful on Instagram and TikTok.
    #this #unexpected #rug #trend #taking
    THIS Unexpected Rug Trend Is Taking Over—Here's How to Style It
    Pictured above: A dining room in Dallas, Texas, designed by Studio Thomas James.As you designa room at home, you may have specific ideas about the paint color, furniture placement, and even the lighting scheme your space requires to truly sing. But, if you're not also considering what type of rug will ground the entire look, this essential room-finishing touch may end up feeling like an afterthought. After all, one of the best ways to ensure your space looks expertly planned from top to bottom is to opt for a rug that can anchor the whole space—and, in many cases, that means a maximalist rug.A maximalist-style rug, or one that has a bold color, an abstract or asymmetrical pattern, an organic shape, distinctive pile texture, or unconventional application, offers a fresh answer to the perpetual design question, "What is this room missing?" Instead of defaulting to a neutral-colored, low-pile rug that goes largely unnoticed, a compelling case can be made for choosing a design that functions more as a tactile piece of art. Asha Chaudhary, the CEO of Jaipur, India-based rug brand Jaipur Living, has noticed many consumers moving away from "safe" interiors and embracing designs that pop with personality. "There’s a growing desire to design with individuality and soul. A vibrant or highly detailed rug can instantly transform a space by adding movement, contrast, and character, all in one single piece," she says.Ahead, we spoke to Chaudhary to get her essential tips for choosing the right maximalist rug for your design style, how to evaluate the construction of a piece, and even why you should think outside the box when it comes to the standard area rug shape. Turns out, this foundational mainstay can be a deeply personal expression of identity.Related StoriesWhen a Maximalist Rug Makes SenseJohn MerklAn outdoor lounge in Healdsburg, California, designed by Sheldon Harte.As you might imagine, integrating a maximalist rug into an existing aesthetic isn't about making a one-to-one swap. You'll want to refine your overall approach and potentially tweak elements of the room already in place, too."I like to think about rugs this way: Sometimes they play a supporting role, and other times, they’re the hero of the room," Chaudhary says. "Statement rugs are designed to stand out. They tell stories, stir emotion, and ground a space the way a bold piece of art would."In Chaudhary's work with interior designers who are selecting rugs for clients' high-end homes, she's noticed that tastes have recently swung toward a more maximalist ethos."Designers are leaning into expression and individuality," she says. "There’s growing interest in bold patterns, asymmetry, and designs that reflect the hand of the maker. Color-wise, we’re seeing more adventurous palettes: think jades, bordeauxes, and terracottas. And there’s a strong desire for rugs that feel personal, like they carry a story or a memory." Jaipur LivingJaipur Living’s Manchaha rugs are one-of-a-kind, hand-knotted pieces woven from upcycled hand-spun yarn that follow a freeform design of the artisan’s choosing.Jaipur LivingJaipur Living is uniquely positioned to fulfill the need for one-of-a-kind rugs that are not just visually striking within a space, but deeply meaningful as well. The brand's Manchaha collectioncomprises rugs made of upcycled yarn, each hand-knotted by rural Indian artisans in freeform shapes that capture the imagination."Each piece is designed from the heart of the artisan, with no predetermined pattern, just emotion, inspiration, and memory woven together by hand. What excites me most is this shift away from perfection and toward beauty that feels lived-in, layered, and real," she adds.There’s a strong desire for rugs that feel personal, like they carry a story or a memory.Related StoryHow to Choose the Right Maximalist RugBrittany AmbridgeDesign firm Drake/Anderson reimagined this Greenwich, Connecticut, living room. Good news for those who are taking a slow-decorating approach with their home: Finding the right maximalist rug for your space means looking at the big picture first."Most shoppers start with size and color, but the first question should really be, 'How will this space be used?' That answer guides everything—material, construction, and investment," says Chaudhary.Are you styling an off-limits living room or a lively family den where guests may occasionally wander in with shoes on? In considering your materials, you may want to opt for a performance-fabric rug for areas subject to frequent wear and tear, but Chaudhary has a clear favorite for nearly all other spaces. "Wool is the gold standard. It’s naturally resilient, stain-resistant, and has excellent bounce-back, meaning it recovers well from foot traffic and furniture impressions," she says. "It’s also moisture-wicking and insulating, making it an ideal choice for both comfort and durability."As far as construction goes, Chaudhary breaks down the most widely available options on the market: A hand-knotted rug, crafted by tying individual knots, is the most durable construction and can last decades, even with daily use.Hand-tufted rugs offer a beautiful look at a more accessible price point, but typically won’t have the same lifespan. Power-loomed rugs can be a great solution for high-traffic areas when made with quality materials. Though they fall at the higher end of the price spectrum, hand-knotted rugs aren't meant to be untouchable—after all, their quality construction helps ensure that they can stand up to minor mishaps in day-to-day living. This can shift your appreciation of a rug from a humble underfoot accent to a long-lasting art piece worthy of care and intentional restoration when the time comes. "Understanding these distinctions helps consumers make smarter, more lasting investments for their homes," Chaudhary says. Related StoryOpting for Unconventional Applications Lesley UnruhSarah Vaile designed this vibrant vestibule in Chicago, Illinois.Maximalist rugs encompass an impressively broad category, and even if you already have an area rug rolled out that you're happy with, there are alternative shapes you can choose, or ways in which they can imbue creative expression far beyond the floor."I’ve seen some incredibly beautiful applications of rugs as wall art. Especially when it comes to smaller or one-of-a-kind pieces, hanging them allows people to appreciate the detail, texture, and artistry at eye level," says Chaudhary. "Some designers have also used narrow runners as table coverings or layered over larger textiles for added dimension."Another interesting facet of maximalist rugs is that you can think outside the rectangle in terms of silhouette."We’re seeing more interest in irregular rug shapes, think soft ovals, curves, even asymmetrical outlines," says Chaudhary. "Clients are designing with more fluidity and movement in mind, especially in open-plan spaces. Extra-long runners, oversized circles, and multi-shape layouts are also trending."Ultimately, the best maximalist rug for you is one that meets your home's needs while highlighting your personal style. In spaces where dramatic light fixtures or punchy paint colors aren't practical or allowed, a statement-making rug is the ideal solution. While trends will continue to evolve, honing in on a unique—even tailor-made—design will help ensure aesthetic longevity. Follow House Beautiful on Instagram and TikTok. #this #unexpected #rug #trend #taking
    WWW.HOUSEBEAUTIFUL.COM
    THIS Unexpected Rug Trend Is Taking Over—Here's How to Style It
    Pictured above: A dining room in Dallas, Texas, designed by Studio Thomas James.As you design (or redesign) a room at home, you may have specific ideas about the paint color, furniture placement, and even the lighting scheme your space requires to truly sing. But, if you're not also considering what type of rug will ground the entire look, this essential room-finishing touch may end up feeling like an afterthought. After all, one of the best ways to ensure your space looks expertly planned from top to bottom is to opt for a rug that can anchor the whole space—and, in many cases, that means a maximalist rug.A maximalist-style rug, or one that has a bold color, an abstract or asymmetrical pattern, an organic shape, distinctive pile texture, or unconventional application (such as functioning as a wall mural), offers a fresh answer to the perpetual design question, "What is this room missing?" Instead of defaulting to a neutral-colored, low-pile rug that goes largely unnoticed, a compelling case can be made for choosing a design that functions more as a tactile piece of art. Asha Chaudhary, the CEO of Jaipur, India-based rug brand Jaipur Living, has noticed many consumers moving away from "safe" interiors and embracing designs that pop with personality. "There’s a growing desire to design with individuality and soul. A vibrant or highly detailed rug can instantly transform a space by adding movement, contrast, and character, all in one single piece," she says.Ahead, we spoke to Chaudhary to get her essential tips for choosing the right maximalist rug for your design style, how to evaluate the construction of a piece, and even why you should think outside the box when it comes to the standard area rug shape. Turns out, this foundational mainstay can be a deeply personal expression of identity.Related StoriesWhen a Maximalist Rug Makes SenseJohn MerklAn outdoor lounge in Healdsburg, California, designed by Sheldon Harte.As you might imagine, integrating a maximalist rug into an existing aesthetic isn't about making a one-to-one swap. You'll want to refine your overall approach and potentially tweak elements of the room already in place, too."I like to think about rugs this way: Sometimes they play a supporting role, and other times, they’re the hero of the room," Chaudhary says. "Statement rugs are designed to stand out. They tell stories, stir emotion, and ground a space the way a bold piece of art would."In Chaudhary's work with interior designers who are selecting rugs for clients' high-end homes, she's noticed that tastes have recently swung toward a more maximalist ethos."Designers are leaning into expression and individuality," she says. "There’s growing interest in bold patterns, asymmetry, and designs that reflect the hand of the maker. Color-wise, we’re seeing more adventurous palettes: think jades, bordeauxes, and terracottas. And there’s a strong desire for rugs that feel personal, like they carry a story or a memory." Jaipur LivingJaipur Living’s Manchaha rugs are one-of-a-kind, hand-knotted pieces woven from upcycled hand-spun yarn that follow a freeform design of the artisan’s choosing.Jaipur LivingJaipur Living is uniquely positioned to fulfill the need for one-of-a-kind rugs that are not just visually striking within a space, but deeply meaningful as well. The brand's Manchaha collection (meaning “expression of my heart” in Hindi) comprises rugs made of upcycled yarn, each hand-knotted by rural Indian artisans in freeform shapes that capture the imagination."Each piece is designed from the heart of the artisan, with no predetermined pattern, just emotion, inspiration, and memory woven together by hand. What excites me most is this shift away from perfection and toward beauty that feels lived-in, layered, and real," she adds.There’s a strong desire for rugs that feel personal, like they carry a story or a memory.Related StoryHow to Choose the Right Maximalist RugBrittany AmbridgeDesign firm Drake/Anderson reimagined this Greenwich, Connecticut, living room. Good news for those who are taking a slow-decorating approach with their home: Finding the right maximalist rug for your space means looking at the big picture first."Most shoppers start with size and color, but the first question should really be, 'How will this space be used?' That answer guides everything—material, construction, and investment," says Chaudhary.Are you styling an off-limits living room or a lively family den where guests may occasionally wander in with shoes on? In considering your materials, you may want to opt for a performance-fabric rug for areas subject to frequent wear and tear, but Chaudhary has a clear favorite for nearly all other spaces. "Wool is the gold standard. It’s naturally resilient, stain-resistant, and has excellent bounce-back, meaning it recovers well from foot traffic and furniture impressions," she says. "It’s also moisture-wicking and insulating, making it an ideal choice for both comfort and durability."As far as construction goes, Chaudhary breaks down the most widely available options on the market: A hand-knotted rug, crafted by tying individual knots, is the most durable construction and can last decades, even with daily use.Hand-tufted rugs offer a beautiful look at a more accessible price point, but typically won’t have the same lifespan. Power-loomed rugs can be a great solution for high-traffic areas when made with quality materials. Though they fall at the higher end of the price spectrum, hand-knotted rugs aren't meant to be untouchable—after all, their quality construction helps ensure that they can stand up to minor mishaps in day-to-day living. This can shift your appreciation of a rug from a humble underfoot accent to a long-lasting art piece worthy of care and intentional restoration when the time comes. "Understanding these distinctions helps consumers make smarter, more lasting investments for their homes," Chaudhary says. Related StoryOpting for Unconventional Applications Lesley UnruhSarah Vaile designed this vibrant vestibule in Chicago, Illinois.Maximalist rugs encompass an impressively broad category, and even if you already have an area rug rolled out that you're happy with, there are alternative shapes you can choose, or ways in which they can imbue creative expression far beyond the floor."I’ve seen some incredibly beautiful applications of rugs as wall art. Especially when it comes to smaller or one-of-a-kind pieces, hanging them allows people to appreciate the detail, texture, and artistry at eye level," says Chaudhary. "Some designers have also used narrow runners as table coverings or layered over larger textiles for added dimension."Another interesting facet of maximalist rugs is that you can think outside the rectangle in terms of silhouette."We’re seeing more interest in irregular rug shapes, think soft ovals, curves, even asymmetrical outlines," says Chaudhary. "Clients are designing with more fluidity and movement in mind, especially in open-plan spaces. Extra-long runners, oversized circles, and multi-shape layouts are also trending."Ultimately, the best maximalist rug for you is one that meets your home's needs while highlighting your personal style. In spaces where dramatic light fixtures or punchy paint colors aren't practical or allowed (in the case of renters), a statement-making rug is the ideal solution. While trends will continue to evolve, honing in on a unique—even tailor-made—design will help ensure aesthetic longevity. Follow House Beautiful on Instagram and TikTok.
    Like
    Love
    Wow
    Sad
    Angry
    465
    2 Comentários 0 Compartilhamentos 0 Anterior
  • Why Designers Get Stuck In The Details And How To Stop

    You’ve drawn fifty versions of the same screen — and you still hate every one of them. Begrudgingly, you pick three, show them to your product manager, and hear: “Looks cool, but the idea doesn’t work.” Sound familiar?
    In this article, I’ll unpack why designers fall into detail work at the wrong moment, examining both process pitfalls and the underlying psychological reasons, as understanding these traps is the first step to overcoming them. I’ll also share tactics I use to climb out of that trap.
    Reason #1 You’re Afraid To Show Rough Work
    We designers worship detail. We’re taught that true craft equals razor‑sharp typography, perfect grids, and pixel precision. So the minute a task arrives, we pop open Figma and start polishing long before polish is needed.
    I’ve skipped the sketch phase more times than I care to admit. I told myself it would be faster, yet I always ended up spending hours producing a tidy mock‑up when a scribbled thumbnail would have sparked a five‑minute chat with my product manager. Rough sketches felt “unprofessional,” so I hid them.
    The cost? Lost time, wasted energy — and, by the third redo, teammates were quietly wondering if I even understood the brief.
    The real problem here is the habit: we open Figma and start perfecting the UI before we’ve even solved the problem.
    So why do we hide these rough sketches? It’s not just a bad habit or plain silly. There are solid psychological reasons behind it. We often just call it perfectionism, but it’s deeper than wanting things neat. Digging into the psychologyshows there are a couple of flavors driving this:

    Socially prescribed perfectionismIt’s that nagging feeling that everyone else expects perfect work from you, which makes showing anything rough feel like walking into the lion’s den.
    Self-oriented perfectionismWhere you’re the one setting impossibly high standards for yourself, leading to brutal self-criticism if anything looks slightly off.

    Either way, the result’s the same: showing unfinished work feels wrong, and you miss out on that vital early feedback.
    Back to the design side, remember that clients rarely see architects’ first pencil sketches, but these sketches still exist; they guide structural choices before the 3D render. Treat your thumbnails the same way — artifacts meant to collapse uncertainty, not portfolio pieces. Once stakeholders see the upside, roughness becomes a badge of speed, not sloppiness. So, the key is to consciously make that shift:
    Treat early sketches as disposable tools for thinking and actively share them to get feedback faster.

    Reason #2: You Fix The Symptom, Not The Cause
    Before tackling any task, we need to understand what business outcome we’re aiming for. Product managers might come to us asking to enlarge the payment button in the shopping cart because users aren’t noticing it. The suggested solution itself isn’t necessarily bad, but before redesigning the button, we should ask, “What data suggests they aren’t noticing it?” Don’t get me wrong, I’m not saying you shouldn’t trust your product manager. On the contrary, these questions help ensure you’re on the same page and working with the same data.
    From my experience, here are several reasons why users might not be clicking that coveted button:

    Users don’t understand that this step is for payment.
    They understand it’s about payment but expect order confirmation first.
    Due to incorrect translation, users don’t understand what the button means.
    Lack of trust signals.
    Unexpected additional coststhat appear at this stage.
    Technical issues.

    Now, imagine you simply did what the manager suggested. Would you have solved the problem? Hardly.
    Moreover, the responsibility for the unresolved issue would fall on you, as the interface solution lies within the design domain. The product manager actually did their job correctly by identifying a problem: suspiciously, few users are clicking the button.
    Psychologically, taking on this bigger role isn’t easy. It means overcoming the fear of making mistakes and the discomfort of exploring unclear problems rather than just doing tasks. This shift means seeing ourselves as partners who create value — even if it means fighting a hesitation to question product managers— and understanding that using our product logic expertise proactively is crucial for modern designers.
    There’s another critical reason why we, designers, need to be a bit like product managers: the rise of AI. I deliberately used a simple example about enlarging a button, but I’m confident that in the near future, AI will easily handle routine design tasks. This worries me, but at the same time, I’m already gladly stepping into the product manager’s territory: understanding product and business metrics, formulating hypotheses, conducting research, and so on. It might sound like I’m taking work away from PMs, but believe me, they undoubtedly have enough on their plates and are usually more than happy to delegate some responsibilities to designers.
    Reason #3: You’re Solving The Wrong Problem
    Before solving anything, ask whether the problem even deserves your attention.
    During a major home‑screen redesign, our goal was to drive more users into paid services. The initial hypothesis — making service buttons bigger and brighter might help returning users — seemed reasonable enough to test. However, even when A/B testsshowed minimal impact, we continued to tweak those buttons.
    Only later did it click: the home screen isn’t the place to sell; visitors open the app to start, not to buy. We removed that promo block, and nothing broke. Contextual entry points deeper into the journey performed brilliantly. Lesson learned:
    Without the right context, any visual tweak is lipstick on a pig.

    Why did we get stuck polishing buttons instead of stopping sooner? It’s easy to get tunnel vision. Psychologically, it’s likely the good old sunk cost fallacy kicking in: we’d already invested time in the buttons, so stopping felt like wasting that effort, even though the data wasn’t promising.
    It’s just easier to keep fiddling with something familiar than to admit we need a new plan. Perhaps the simple question I should have asked myself when results stalled was: “Are we optimizing the right thing or just polishing something that fundamentally doesn’t fit the user’s primary goal here?” That alone might have saved hours.
    Reason #4: You’re Drowning In Unactionable Feedback
    We all discuss our work with colleagues. But here’s a crucial point: what kind of question do you pose to kick off that discussion? If your go-to is “What do you think?” well, that question might lead you down a rabbit hole of personal opinions rather than actionable insights. While experienced colleagues will cut through the noise, others, unsure what to evaluate, might comment on anything and everything — fonts, button colors, even when you desperately need to discuss a user flow.
    What matters here are two things:

    The question you ask,
    The context you give.

    That means clearly stating the problem, what you’ve learned, and how your idea aims to fix it.
    For instance:
    “The problem is our payment conversion rate has dropped by X%. I’ve interviewed users and found they abandon payment because they don’t understand how the total amount is calculated. My solution is to show a detailed cost breakdown. Do you think this actually solves the problem for them?”

    Here, you’ve stated the problem, shared your insight, explained your solution, and asked a direct question. It’s even better if you prepare a list of specific sub-questions. For instance: “Are all items in the cost breakdown clear?” or “Does the placement of this breakdown feel intuitive within the payment flow?”
    Another good habit is to keep your rough sketches and previous iterations handy. Some of your colleagues’ suggestions might be things you’ve already tried. It’s great if you can discuss them immediately to either revisit those ideas or definitively set them aside.
    I’m not a psychologist, but experience tells me that, psychologically, the reluctance to be this specific often stems from a fear of our solution being rejected. We tend to internalize feedback: a seemingly innocent comment like, “Have you considered other ways to organize this section?” or “Perhaps explore a different structure for this part?” can instantly morph in our minds into “You completely messed up the structure. You’re a bad designer.” Imposter syndrome, in all its glory.
    So, to wrap up this point, here are two recommendations:

    Prepare for every design discussion.A couple of focused questions will yield far more valuable input than a vague “So, what do you think?”.
    Actively work on separating feedback on your design from your self-worth.If a mistake is pointed out, acknowledge it, learn from it, and you’ll be less likely to repeat it. This is often easier said than done. For me, it took years of working with a psychotherapist. If you struggle with this, I sincerely wish you strength in overcoming it.

    Reason #5 You’re Just Tired
    Sometimes, the issue isn’t strategic at all — it’s fatigue. Fussing over icon corners can feel like a cozy bunker when your brain is fried. There’s a name for this: decision fatigue. Basically, your brain’s battery for hard thinking is low, so it hides out in the easy, comfy zone of pixel-pushing.
    A striking example comes from a New York Times article titled “Do You Suffer From Decision Fatigue?.” It described how judges deciding on release requests were far more likely to grant release early in the daycompared to late in the daysimply because their decision-making energy was depleted. Luckily, designers rarely hold someone’s freedom in their hands, but the example dramatically shows how fatigue can impact our judgment and productivity.
    What helps here:

    Swap tasks.Trade tickets with another designer; novelty resets your focus.
    Talk to another designer.If NDA permits, ask peers outside the team for a sanity check.
    Step away.Even a ten‑minute walk can do more than a double‑shot espresso.

    By the way, I came up with these ideas while walking around my office. I was lucky to work near a river, and those short walks quickly turned into a helpful habit.

    And one more trick that helps me snap out of detail mode early: if I catch myself making around 20 little tweaks — changing font weight, color, border radius — I just stop. Over time, it turned into a habit. I have a similar one with Instagram: by the third reel, my brain quietly asks, “Wait, weren’t we working?” Funny how that kind of nudge saves a ton of time.
    Four Steps I Use to Avoid Drowning In Detail
    Knowing these potential traps, here’s the practical process I use to stay on track:
    1. Define the Core Problem & Business Goal
    Before anything, dig deep: what’s the actual problem we’re solving, not just the requested task or a surface-level symptom? Ask ‘why’ repeatedly. What user pain or business need are we addressing? Then, state the clear business goal: “What metric am I moving, and do we have data to prove this is the right lever?” If retention is the goal, decide whether push reminders, gamification, or personalised content is the best route. The wrong lever, or tackling a symptom instead of the cause, dooms everything downstream.
    2. Choose the MechanicOnce the core problem and goal are clear, lock the solution principle or ‘mechanic’ first. Going with a game layer? Decide if it’s leaderboards, streaks, or badges. Write it down. Then move on. No UI yet. This keeps the focus high-level before diving into pixels.
    3. Wireframe the Flow & Get Focused Feedback
    Now open Figma. Map screens, layout, and transitions. Boxes and arrows are enough. Keep the fidelity low so the discussion stays on the flow, not colour. Crucially, when you share these early wires, ask specific questions and provide clear contextto get actionable feedback, not just vague opinions.
    4. Polish the VisualsI only let myself tweak grids, type scales, and shadows after the flow is validated. If progress stalls, or before a major polish effort, I surface the work in a design critique — again using targeted questions and clear context — instead of hiding in version 47. This ensures detailing serves the now-validated solution.
    Even for something as small as a single button, running these four checkpoints takes about ten minutes and saves hours of decorative dithering.
    Wrapping Up
    Next time you feel the pull to vanish into mock‑ups before the problem is nailed down, pause and ask what you might be avoiding. Yes, that can expose an uncomfortable truth. But pausing to ask what you might be avoiding — maybe the fuzzy core problem, or just asking for tough feedback — gives you the power to face the real issue head-on. It keeps the project focused on solving the right problem, not just perfecting a flawed solution.
    Attention to detail is a superpower when used at the right moment. Obsessing over pixels too soon, though, is a bad habit and a warning light telling us the process needs a rethink.
    #why #designers #get #stuck #details
    Why Designers Get Stuck In The Details And How To Stop
    You’ve drawn fifty versions of the same screen — and you still hate every one of them. Begrudgingly, you pick three, show them to your product manager, and hear: “Looks cool, but the idea doesn’t work.” Sound familiar? In this article, I’ll unpack why designers fall into detail work at the wrong moment, examining both process pitfalls and the underlying psychological reasons, as understanding these traps is the first step to overcoming them. I’ll also share tactics I use to climb out of that trap. Reason #1 You’re Afraid To Show Rough Work We designers worship detail. We’re taught that true craft equals razor‑sharp typography, perfect grids, and pixel precision. So the minute a task arrives, we pop open Figma and start polishing long before polish is needed. I’ve skipped the sketch phase more times than I care to admit. I told myself it would be faster, yet I always ended up spending hours producing a tidy mock‑up when a scribbled thumbnail would have sparked a five‑minute chat with my product manager. Rough sketches felt “unprofessional,” so I hid them. The cost? Lost time, wasted energy — and, by the third redo, teammates were quietly wondering if I even understood the brief. The real problem here is the habit: we open Figma and start perfecting the UI before we’ve even solved the problem. So why do we hide these rough sketches? It’s not just a bad habit or plain silly. There are solid psychological reasons behind it. We often just call it perfectionism, but it’s deeper than wanting things neat. Digging into the psychologyshows there are a couple of flavors driving this: Socially prescribed perfectionismIt’s that nagging feeling that everyone else expects perfect work from you, which makes showing anything rough feel like walking into the lion’s den. Self-oriented perfectionismWhere you’re the one setting impossibly high standards for yourself, leading to brutal self-criticism if anything looks slightly off. Either way, the result’s the same: showing unfinished work feels wrong, and you miss out on that vital early feedback. Back to the design side, remember that clients rarely see architects’ first pencil sketches, but these sketches still exist; they guide structural choices before the 3D render. Treat your thumbnails the same way — artifacts meant to collapse uncertainty, not portfolio pieces. Once stakeholders see the upside, roughness becomes a badge of speed, not sloppiness. So, the key is to consciously make that shift: Treat early sketches as disposable tools for thinking and actively share them to get feedback faster. Reason #2: You Fix The Symptom, Not The Cause Before tackling any task, we need to understand what business outcome we’re aiming for. Product managers might come to us asking to enlarge the payment button in the shopping cart because users aren’t noticing it. The suggested solution itself isn’t necessarily bad, but before redesigning the button, we should ask, “What data suggests they aren’t noticing it?” Don’t get me wrong, I’m not saying you shouldn’t trust your product manager. On the contrary, these questions help ensure you’re on the same page and working with the same data. From my experience, here are several reasons why users might not be clicking that coveted button: Users don’t understand that this step is for payment. They understand it’s about payment but expect order confirmation first. Due to incorrect translation, users don’t understand what the button means. Lack of trust signals. Unexpected additional coststhat appear at this stage. Technical issues. Now, imagine you simply did what the manager suggested. Would you have solved the problem? Hardly. Moreover, the responsibility for the unresolved issue would fall on you, as the interface solution lies within the design domain. The product manager actually did their job correctly by identifying a problem: suspiciously, few users are clicking the button. Psychologically, taking on this bigger role isn’t easy. It means overcoming the fear of making mistakes and the discomfort of exploring unclear problems rather than just doing tasks. This shift means seeing ourselves as partners who create value — even if it means fighting a hesitation to question product managers— and understanding that using our product logic expertise proactively is crucial for modern designers. There’s another critical reason why we, designers, need to be a bit like product managers: the rise of AI. I deliberately used a simple example about enlarging a button, but I’m confident that in the near future, AI will easily handle routine design tasks. This worries me, but at the same time, I’m already gladly stepping into the product manager’s territory: understanding product and business metrics, formulating hypotheses, conducting research, and so on. It might sound like I’m taking work away from PMs, but believe me, they undoubtedly have enough on their plates and are usually more than happy to delegate some responsibilities to designers. Reason #3: You’re Solving The Wrong Problem Before solving anything, ask whether the problem even deserves your attention. During a major home‑screen redesign, our goal was to drive more users into paid services. The initial hypothesis — making service buttons bigger and brighter might help returning users — seemed reasonable enough to test. However, even when A/B testsshowed minimal impact, we continued to tweak those buttons. Only later did it click: the home screen isn’t the place to sell; visitors open the app to start, not to buy. We removed that promo block, and nothing broke. Contextual entry points deeper into the journey performed brilliantly. Lesson learned: Without the right context, any visual tweak is lipstick on a pig. Why did we get stuck polishing buttons instead of stopping sooner? It’s easy to get tunnel vision. Psychologically, it’s likely the good old sunk cost fallacy kicking in: we’d already invested time in the buttons, so stopping felt like wasting that effort, even though the data wasn’t promising. It’s just easier to keep fiddling with something familiar than to admit we need a new plan. Perhaps the simple question I should have asked myself when results stalled was: “Are we optimizing the right thing or just polishing something that fundamentally doesn’t fit the user’s primary goal here?” That alone might have saved hours. Reason #4: You’re Drowning In Unactionable Feedback We all discuss our work with colleagues. But here’s a crucial point: what kind of question do you pose to kick off that discussion? If your go-to is “What do you think?” well, that question might lead you down a rabbit hole of personal opinions rather than actionable insights. While experienced colleagues will cut through the noise, others, unsure what to evaluate, might comment on anything and everything — fonts, button colors, even when you desperately need to discuss a user flow. What matters here are two things: The question you ask, The context you give. That means clearly stating the problem, what you’ve learned, and how your idea aims to fix it. For instance: “The problem is our payment conversion rate has dropped by X%. I’ve interviewed users and found they abandon payment because they don’t understand how the total amount is calculated. My solution is to show a detailed cost breakdown. Do you think this actually solves the problem for them?” Here, you’ve stated the problem, shared your insight, explained your solution, and asked a direct question. It’s even better if you prepare a list of specific sub-questions. For instance: “Are all items in the cost breakdown clear?” or “Does the placement of this breakdown feel intuitive within the payment flow?” Another good habit is to keep your rough sketches and previous iterations handy. Some of your colleagues’ suggestions might be things you’ve already tried. It’s great if you can discuss them immediately to either revisit those ideas or definitively set them aside. I’m not a psychologist, but experience tells me that, psychologically, the reluctance to be this specific often stems from a fear of our solution being rejected. We tend to internalize feedback: a seemingly innocent comment like, “Have you considered other ways to organize this section?” or “Perhaps explore a different structure for this part?” can instantly morph in our minds into “You completely messed up the structure. You’re a bad designer.” Imposter syndrome, in all its glory. So, to wrap up this point, here are two recommendations: Prepare for every design discussion.A couple of focused questions will yield far more valuable input than a vague “So, what do you think?”. Actively work on separating feedback on your design from your self-worth.If a mistake is pointed out, acknowledge it, learn from it, and you’ll be less likely to repeat it. This is often easier said than done. For me, it took years of working with a psychotherapist. If you struggle with this, I sincerely wish you strength in overcoming it. Reason #5 You’re Just Tired Sometimes, the issue isn’t strategic at all — it’s fatigue. Fussing over icon corners can feel like a cozy bunker when your brain is fried. There’s a name for this: decision fatigue. Basically, your brain’s battery for hard thinking is low, so it hides out in the easy, comfy zone of pixel-pushing. A striking example comes from a New York Times article titled “Do You Suffer From Decision Fatigue?.” It described how judges deciding on release requests were far more likely to grant release early in the daycompared to late in the daysimply because their decision-making energy was depleted. Luckily, designers rarely hold someone’s freedom in their hands, but the example dramatically shows how fatigue can impact our judgment and productivity. What helps here: Swap tasks.Trade tickets with another designer; novelty resets your focus. Talk to another designer.If NDA permits, ask peers outside the team for a sanity check. Step away.Even a ten‑minute walk can do more than a double‑shot espresso. By the way, I came up with these ideas while walking around my office. I was lucky to work near a river, and those short walks quickly turned into a helpful habit. And one more trick that helps me snap out of detail mode early: if I catch myself making around 20 little tweaks — changing font weight, color, border radius — I just stop. Over time, it turned into a habit. I have a similar one with Instagram: by the third reel, my brain quietly asks, “Wait, weren’t we working?” Funny how that kind of nudge saves a ton of time. Four Steps I Use to Avoid Drowning In Detail Knowing these potential traps, here’s the practical process I use to stay on track: 1. Define the Core Problem & Business Goal Before anything, dig deep: what’s the actual problem we’re solving, not just the requested task or a surface-level symptom? Ask ‘why’ repeatedly. What user pain or business need are we addressing? Then, state the clear business goal: “What metric am I moving, and do we have data to prove this is the right lever?” If retention is the goal, decide whether push reminders, gamification, or personalised content is the best route. The wrong lever, or tackling a symptom instead of the cause, dooms everything downstream. 2. Choose the MechanicOnce the core problem and goal are clear, lock the solution principle or ‘mechanic’ first. Going with a game layer? Decide if it’s leaderboards, streaks, or badges. Write it down. Then move on. No UI yet. This keeps the focus high-level before diving into pixels. 3. Wireframe the Flow & Get Focused Feedback Now open Figma. Map screens, layout, and transitions. Boxes and arrows are enough. Keep the fidelity low so the discussion stays on the flow, not colour. Crucially, when you share these early wires, ask specific questions and provide clear contextto get actionable feedback, not just vague opinions. 4. Polish the VisualsI only let myself tweak grids, type scales, and shadows after the flow is validated. If progress stalls, or before a major polish effort, I surface the work in a design critique — again using targeted questions and clear context — instead of hiding in version 47. This ensures detailing serves the now-validated solution. Even for something as small as a single button, running these four checkpoints takes about ten minutes and saves hours of decorative dithering. Wrapping Up Next time you feel the pull to vanish into mock‑ups before the problem is nailed down, pause and ask what you might be avoiding. Yes, that can expose an uncomfortable truth. But pausing to ask what you might be avoiding — maybe the fuzzy core problem, or just asking for tough feedback — gives you the power to face the real issue head-on. It keeps the project focused on solving the right problem, not just perfecting a flawed solution. Attention to detail is a superpower when used at the right moment. Obsessing over pixels too soon, though, is a bad habit and a warning light telling us the process needs a rethink. #why #designers #get #stuck #details
    SMASHINGMAGAZINE.COM
    Why Designers Get Stuck In The Details And How To Stop
    You’ve drawn fifty versions of the same screen — and you still hate every one of them. Begrudgingly, you pick three, show them to your product manager, and hear: “Looks cool, but the idea doesn’t work.” Sound familiar? In this article, I’ll unpack why designers fall into detail work at the wrong moment, examining both process pitfalls and the underlying psychological reasons, as understanding these traps is the first step to overcoming them. I’ll also share tactics I use to climb out of that trap. Reason #1 You’re Afraid To Show Rough Work We designers worship detail. We’re taught that true craft equals razor‑sharp typography, perfect grids, and pixel precision. So the minute a task arrives, we pop open Figma and start polishing long before polish is needed. I’ve skipped the sketch phase more times than I care to admit. I told myself it would be faster, yet I always ended up spending hours producing a tidy mock‑up when a scribbled thumbnail would have sparked a five‑minute chat with my product manager. Rough sketches felt “unprofessional,” so I hid them. The cost? Lost time, wasted energy — and, by the third redo, teammates were quietly wondering if I even understood the brief. The real problem here is the habit: we open Figma and start perfecting the UI before we’ve even solved the problem. So why do we hide these rough sketches? It’s not just a bad habit or plain silly. There are solid psychological reasons behind it. We often just call it perfectionism, but it’s deeper than wanting things neat. Digging into the psychology (like the research by Hewitt and Flett) shows there are a couple of flavors driving this: Socially prescribed perfectionismIt’s that nagging feeling that everyone else expects perfect work from you, which makes showing anything rough feel like walking into the lion’s den. Self-oriented perfectionismWhere you’re the one setting impossibly high standards for yourself, leading to brutal self-criticism if anything looks slightly off. Either way, the result’s the same: showing unfinished work feels wrong, and you miss out on that vital early feedback. Back to the design side, remember that clients rarely see architects’ first pencil sketches, but these sketches still exist; they guide structural choices before the 3D render. Treat your thumbnails the same way — artifacts meant to collapse uncertainty, not portfolio pieces. Once stakeholders see the upside, roughness becomes a badge of speed, not sloppiness. So, the key is to consciously make that shift: Treat early sketches as disposable tools for thinking and actively share them to get feedback faster. Reason #2: You Fix The Symptom, Not The Cause Before tackling any task, we need to understand what business outcome we’re aiming for. Product managers might come to us asking to enlarge the payment button in the shopping cart because users aren’t noticing it. The suggested solution itself isn’t necessarily bad, but before redesigning the button, we should ask, “What data suggests they aren’t noticing it?” Don’t get me wrong, I’m not saying you shouldn’t trust your product manager. On the contrary, these questions help ensure you’re on the same page and working with the same data. From my experience, here are several reasons why users might not be clicking that coveted button: Users don’t understand that this step is for payment. They understand it’s about payment but expect order confirmation first. Due to incorrect translation, users don’t understand what the button means. Lack of trust signals (no security icons, unclear seller information). Unexpected additional costs (hidden fees, shipping) that appear at this stage. Technical issues (inactive button, page freezing). Now, imagine you simply did what the manager suggested. Would you have solved the problem? Hardly. Moreover, the responsibility for the unresolved issue would fall on you, as the interface solution lies within the design domain. The product manager actually did their job correctly by identifying a problem: suspiciously, few users are clicking the button. Psychologically, taking on this bigger role isn’t easy. It means overcoming the fear of making mistakes and the discomfort of exploring unclear problems rather than just doing tasks. This shift means seeing ourselves as partners who create value — even if it means fighting a hesitation to question product managers (which might come from a fear of speaking up or a desire to avoid challenging authority) — and understanding that using our product logic expertise proactively is crucial for modern designers. There’s another critical reason why we, designers, need to be a bit like product managers: the rise of AI. I deliberately used a simple example about enlarging a button, but I’m confident that in the near future, AI will easily handle routine design tasks. This worries me, but at the same time, I’m already gladly stepping into the product manager’s territory: understanding product and business metrics, formulating hypotheses, conducting research, and so on. It might sound like I’m taking work away from PMs, but believe me, they undoubtedly have enough on their plates and are usually more than happy to delegate some responsibilities to designers. Reason #3: You’re Solving The Wrong Problem Before solving anything, ask whether the problem even deserves your attention. During a major home‑screen redesign, our goal was to drive more users into paid services. The initial hypothesis — making service buttons bigger and brighter might help returning users — seemed reasonable enough to test. However, even when A/B tests (a method of comparing two versions of a design to determine which performs better) showed minimal impact, we continued to tweak those buttons. Only later did it click: the home screen isn’t the place to sell; visitors open the app to start, not to buy. We removed that promo block, and nothing broke. Contextual entry points deeper into the journey performed brilliantly. Lesson learned: Without the right context, any visual tweak is lipstick on a pig. Why did we get stuck polishing buttons instead of stopping sooner? It’s easy to get tunnel vision. Psychologically, it’s likely the good old sunk cost fallacy kicking in: we’d already invested time in the buttons, so stopping felt like wasting that effort, even though the data wasn’t promising. It’s just easier to keep fiddling with something familiar than to admit we need a new plan. Perhaps the simple question I should have asked myself when results stalled was: “Are we optimizing the right thing or just polishing something that fundamentally doesn’t fit the user’s primary goal here?” That alone might have saved hours. Reason #4: You’re Drowning In Unactionable Feedback We all discuss our work with colleagues. But here’s a crucial point: what kind of question do you pose to kick off that discussion? If your go-to is “What do you think?” well, that question might lead you down a rabbit hole of personal opinions rather than actionable insights. While experienced colleagues will cut through the noise, others, unsure what to evaluate, might comment on anything and everything — fonts, button colors, even when you desperately need to discuss a user flow. What matters here are two things: The question you ask, The context you give. That means clearly stating the problem, what you’ve learned, and how your idea aims to fix it. For instance: “The problem is our payment conversion rate has dropped by X%. I’ve interviewed users and found they abandon payment because they don’t understand how the total amount is calculated. My solution is to show a detailed cost breakdown. Do you think this actually solves the problem for them?” Here, you’ve stated the problem (conversion drop), shared your insight (user confusion), explained your solution (cost breakdown), and asked a direct question. It’s even better if you prepare a list of specific sub-questions. For instance: “Are all items in the cost breakdown clear?” or “Does the placement of this breakdown feel intuitive within the payment flow?” Another good habit is to keep your rough sketches and previous iterations handy. Some of your colleagues’ suggestions might be things you’ve already tried. It’s great if you can discuss them immediately to either revisit those ideas or definitively set them aside. I’m not a psychologist, but experience tells me that, psychologically, the reluctance to be this specific often stems from a fear of our solution being rejected. We tend to internalize feedback: a seemingly innocent comment like, “Have you considered other ways to organize this section?” or “Perhaps explore a different structure for this part?” can instantly morph in our minds into “You completely messed up the structure. You’re a bad designer.” Imposter syndrome, in all its glory. So, to wrap up this point, here are two recommendations: Prepare for every design discussion.A couple of focused questions will yield far more valuable input than a vague “So, what do you think?”. Actively work on separating feedback on your design from your self-worth.If a mistake is pointed out, acknowledge it, learn from it, and you’ll be less likely to repeat it. This is often easier said than done. For me, it took years of working with a psychotherapist. If you struggle with this, I sincerely wish you strength in overcoming it. Reason #5 You’re Just Tired Sometimes, the issue isn’t strategic at all — it’s fatigue. Fussing over icon corners can feel like a cozy bunker when your brain is fried. There’s a name for this: decision fatigue. Basically, your brain’s battery for hard thinking is low, so it hides out in the easy, comfy zone of pixel-pushing. A striking example comes from a New York Times article titled “Do You Suffer From Decision Fatigue?.” It described how judges deciding on release requests were far more likely to grant release early in the day (about 70% of cases) compared to late in the day (less than 10%) simply because their decision-making energy was depleted. Luckily, designers rarely hold someone’s freedom in their hands, but the example dramatically shows how fatigue can impact our judgment and productivity. What helps here: Swap tasks.Trade tickets with another designer; novelty resets your focus. Talk to another designer.If NDA permits, ask peers outside the team for a sanity check. Step away.Even a ten‑minute walk can do more than a double‑shot espresso. By the way, I came up with these ideas while walking around my office. I was lucky to work near a river, and those short walks quickly turned into a helpful habit. And one more trick that helps me snap out of detail mode early: if I catch myself making around 20 little tweaks — changing font weight, color, border radius — I just stop. Over time, it turned into a habit. I have a similar one with Instagram: by the third reel, my brain quietly asks, “Wait, weren’t we working?” Funny how that kind of nudge saves a ton of time. Four Steps I Use to Avoid Drowning In Detail Knowing these potential traps, here’s the practical process I use to stay on track: 1. Define the Core Problem & Business Goal Before anything, dig deep: what’s the actual problem we’re solving, not just the requested task or a surface-level symptom? Ask ‘why’ repeatedly. What user pain or business need are we addressing? Then, state the clear business goal: “What metric am I moving, and do we have data to prove this is the right lever?” If retention is the goal, decide whether push reminders, gamification, or personalised content is the best route. The wrong lever, or tackling a symptom instead of the cause, dooms everything downstream. 2. Choose the Mechanic (Solution Principle) Once the core problem and goal are clear, lock the solution principle or ‘mechanic’ first. Going with a game layer? Decide if it’s leaderboards, streaks, or badges. Write it down. Then move on. No UI yet. This keeps the focus high-level before diving into pixels. 3. Wireframe the Flow & Get Focused Feedback Now open Figma. Map screens, layout, and transitions. Boxes and arrows are enough. Keep the fidelity low so the discussion stays on the flow, not colour. Crucially, when you share these early wires, ask specific questions and provide clear context (as discussed in ‘Reason #4’) to get actionable feedback, not just vague opinions. 4. Polish the Visuals (Mindfully) I only let myself tweak grids, type scales, and shadows after the flow is validated. If progress stalls, or before a major polish effort, I surface the work in a design critique — again using targeted questions and clear context — instead of hiding in version 47. This ensures detailing serves the now-validated solution. Even for something as small as a single button, running these four checkpoints takes about ten minutes and saves hours of decorative dithering. Wrapping Up Next time you feel the pull to vanish into mock‑ups before the problem is nailed down, pause and ask what you might be avoiding. Yes, that can expose an uncomfortable truth. But pausing to ask what you might be avoiding — maybe the fuzzy core problem, or just asking for tough feedback — gives you the power to face the real issue head-on. It keeps the project focused on solving the right problem, not just perfecting a flawed solution. Attention to detail is a superpower when used at the right moment. Obsessing over pixels too soon, though, is a bad habit and a warning light telling us the process needs a rethink.
    Like
    Love
    Wow
    Angry
    Sad
    596
    0 Comentários 0 Compartilhamentos 0 Anterior
  • Creating a Highly Detailed Tech-Inspired Scene with Blender

    IntroductionHello! My name is Denys. I was born and raised in Nigeria, where I'm currently based. I began my journey into 3D art in March 2022, teaching myself through online resources, starting, of course, with the iconic donut tutorial on YouTube. Since then, I've continued to grow my skills independently, and now I'm working toward a career in 3D generalism, with a particular interest in environment art.I originally got into Blender because SketchUp wasn't free, and I could not keep up with the subscriptions. While searching for alternatives, I came across Blender. That's when I realized I had installed it once years ago, but back then, the interface completely intimidated me, and I gave up on it. This time, though, I decided to stick with it – and I'm glad I did.I started out creating simple models. One of my first big projects was modeling the entire SpongeBob crew. That led to my first animation, and eventually, the first four episodes of a short animated series. As I grew more confident, I began participating in online 3D competitions, like cgandwe, where I focused on designing realistic environments. Those experiences have played a huge role in getting me to where I am today.Getting Started Before starting any scene, I always look for references. It might not be the most original approach, but it's what works best for me. One piece that inspired me was a beautiful artwork by Calder Moore. I bookmarked it as soon as I saw it back in 2023, and luckily, I finally found the time to bring it to life last month.BlockoutThe goal was to match the original camera angle and roughly model the main frame of the structures. It wasn't perfect, but modeling and placing the lower docks helped me get the perspective right. Then I moved on to modeling and positioning the major structures in the scene.I gave myself two weeks to complete this project. And as much as I enjoy modeling, I also enjoy not modeling, so I turned to asset kits and free models to help speed things up. I came across an awesome paid kit by Bigmediumsmall and instantly knew it would fit perfectly into my scene.I also downloaded a few models from Sketchfab, including a lamp, desk console, freighter controls, and a robotic arm, which I later took apart to add extra detail. Another incredibly helpful tool was the Random Flow add-on by BlenderGuppy, which made adding sci-fi elements much easier. Lastly, I pulled in some models from my older sci-fi and cyberpunk projects to round things out.Kitbashing Once I had the overall shape I was aiming for, I moved on to kitbashing to pack in as much detail as possible. There wasn't any strict method to the madness; I simply picked assets I liked, whether it was a set of pipes, vents, or even a random shape that just worked in the sci-fi context. I focused first on kitbashing the front structure, and used the Random Flow add-on to fill in areas where I didn't kitbash manually. Then I moved on to the other collections, following the same process.The freighter was the final piece of the puzzle, and I knew it was going to be a challenge. Part of me wanted to model it entirely from scratch, but the more practical side knew I could save a lot of time by sticking with my usual method. So I modeled the main shapes myself, then kitbashed the details to bring it to life. I also grabbed some crates from Sketchfab to fill out the scene.Texturing This part was easily my favorite, and there was no shortcut here. I had to meticulously create each material myself. Well, I did use PBR materials downloaded from CGAmbient as a base, but I spent a lot of time tweaking and editing them to get everything just right.Texturing has always been my favorite stage when building scenes like this. Many artists prefer external tools like Substance 3D Painter, but I've learned so much about procedural texturing, especially from RyanKingArt, that I couldn't let it go. It's such a flexible and rewarding approach, and I love pushing it as far as I can.I wanted most of the colors in the scene to be dark, but I did keep the original color of the pipes and the pillars, just to add a little bit of vibrance to the scene. I also wanted the overall texture to be very rough and grungy. One of the biggest helps in achieving this was using the Grunge Maps from Substance 3D Painter. I found a way to extract them into Blender, and it helped.A major tool during the texturing phase was Jsplacement, which I used to procedurally generate sci-fi grids and plates. This was the icing on the cake for adding intricate details. Whenever an area felt too flat, I applied bump maps with these grids and panels to bring the materials to life. For example, both the lamp pole and the entire black metal material feature these Jsplacement Maps.Lighting For this, I didn't do anything fancy. I knew the scene was in a high altitude, so I looked for HDRI with a cloudless sky, and I boosted the saturation up a little to give it that high altitude look.Post-Production The rendering phase was challenging since I was working on a low-end laptop. I couldn't render the entire scene all at once, so I broke it down by collections and rendered them as separate layers. Then, I composited the layers together in post-production. I'm not big on heavy post-work, so I kept it simple, mostly tweaking brightness and saturation on my phone. That's about it for the post-production process.Conclusion The entire project took me 10 days to complete, working at least four hours each day. Although I've expressed my love for texturing, my favorite part of this project was the detailing and kitbashing. I really enjoyed piecing all the small details together. The most challenging part was deciding which assets to use and where to place them. I had a lot of greebles to choose from, but I'm happy with the ones I selected; they felt like a perfect fit for the scene.I know kitbashing sometimes gets a negative reputation in the 3D community, but I found it incredibly relieving. Honestly, this project wouldn't have come together without it, so I fully embraced the process.I'm excited to keep making projects like this. The world of 3D art is truly an endless and vast realm, and I encourage every artist like me to keep exploring it, one project at a time.Denys Molokwu, 3D Artist
    #creating #highly #detailed #techinspired #scene
    Creating a Highly Detailed Tech-Inspired Scene with Blender
    IntroductionHello! My name is Denys. I was born and raised in Nigeria, where I'm currently based. I began my journey into 3D art in March 2022, teaching myself through online resources, starting, of course, with the iconic donut tutorial on YouTube. Since then, I've continued to grow my skills independently, and now I'm working toward a career in 3D generalism, with a particular interest in environment art.I originally got into Blender because SketchUp wasn't free, and I could not keep up with the subscriptions. While searching for alternatives, I came across Blender. That's when I realized I had installed it once years ago, but back then, the interface completely intimidated me, and I gave up on it. This time, though, I decided to stick with it – and I'm glad I did.I started out creating simple models. One of my first big projects was modeling the entire SpongeBob crew. That led to my first animation, and eventually, the first four episodes of a short animated series. As I grew more confident, I began participating in online 3D competitions, like cgandwe, where I focused on designing realistic environments. Those experiences have played a huge role in getting me to where I am today.Getting Started Before starting any scene, I always look for references. It might not be the most original approach, but it's what works best for me. One piece that inspired me was a beautiful artwork by Calder Moore. I bookmarked it as soon as I saw it back in 2023, and luckily, I finally found the time to bring it to life last month.BlockoutThe goal was to match the original camera angle and roughly model the main frame of the structures. It wasn't perfect, but modeling and placing the lower docks helped me get the perspective right. Then I moved on to modeling and positioning the major structures in the scene.I gave myself two weeks to complete this project. And as much as I enjoy modeling, I also enjoy not modeling, so I turned to asset kits and free models to help speed things up. I came across an awesome paid kit by Bigmediumsmall and instantly knew it would fit perfectly into my scene.I also downloaded a few models from Sketchfab, including a lamp, desk console, freighter controls, and a robotic arm, which I later took apart to add extra detail. Another incredibly helpful tool was the Random Flow add-on by BlenderGuppy, which made adding sci-fi elements much easier. Lastly, I pulled in some models from my older sci-fi and cyberpunk projects to round things out.Kitbashing Once I had the overall shape I was aiming for, I moved on to kitbashing to pack in as much detail as possible. There wasn't any strict method to the madness; I simply picked assets I liked, whether it was a set of pipes, vents, or even a random shape that just worked in the sci-fi context. I focused first on kitbashing the front structure, and used the Random Flow add-on to fill in areas where I didn't kitbash manually. Then I moved on to the other collections, following the same process.The freighter was the final piece of the puzzle, and I knew it was going to be a challenge. Part of me wanted to model it entirely from scratch, but the more practical side knew I could save a lot of time by sticking with my usual method. So I modeled the main shapes myself, then kitbashed the details to bring it to life. I also grabbed some crates from Sketchfab to fill out the scene.Texturing This part was easily my favorite, and there was no shortcut here. I had to meticulously create each material myself. Well, I did use PBR materials downloaded from CGAmbient as a base, but I spent a lot of time tweaking and editing them to get everything just right.Texturing has always been my favorite stage when building scenes like this. Many artists prefer external tools like Substance 3D Painter, but I've learned so much about procedural texturing, especially from RyanKingArt, that I couldn't let it go. It's such a flexible and rewarding approach, and I love pushing it as far as I can.I wanted most of the colors in the scene to be dark, but I did keep the original color of the pipes and the pillars, just to add a little bit of vibrance to the scene. I also wanted the overall texture to be very rough and grungy. One of the biggest helps in achieving this was using the Grunge Maps from Substance 3D Painter. I found a way to extract them into Blender, and it helped.A major tool during the texturing phase was Jsplacement, which I used to procedurally generate sci-fi grids and plates. This was the icing on the cake for adding intricate details. Whenever an area felt too flat, I applied bump maps with these grids and panels to bring the materials to life. For example, both the lamp pole and the entire black metal material feature these Jsplacement Maps.Lighting For this, I didn't do anything fancy. I knew the scene was in a high altitude, so I looked for HDRI with a cloudless sky, and I boosted the saturation up a little to give it that high altitude look.Post-Production The rendering phase was challenging since I was working on a low-end laptop. I couldn't render the entire scene all at once, so I broke it down by collections and rendered them as separate layers. Then, I composited the layers together in post-production. I'm not big on heavy post-work, so I kept it simple, mostly tweaking brightness and saturation on my phone. That's about it for the post-production process.Conclusion The entire project took me 10 days to complete, working at least four hours each day. Although I've expressed my love for texturing, my favorite part of this project was the detailing and kitbashing. I really enjoyed piecing all the small details together. The most challenging part was deciding which assets to use and where to place them. I had a lot of greebles to choose from, but I'm happy with the ones I selected; they felt like a perfect fit for the scene.I know kitbashing sometimes gets a negative reputation in the 3D community, but I found it incredibly relieving. Honestly, this project wouldn't have come together without it, so I fully embraced the process.I'm excited to keep making projects like this. The world of 3D art is truly an endless and vast realm, and I encourage every artist like me to keep exploring it, one project at a time.Denys Molokwu, 3D Artist #creating #highly #detailed #techinspired #scene
    80.LV
    Creating a Highly Detailed Tech-Inspired Scene with Blender
    IntroductionHello! My name is Denys. I was born and raised in Nigeria, where I'm currently based. I began my journey into 3D art in March 2022, teaching myself through online resources, starting, of course, with the iconic donut tutorial on YouTube. Since then, I've continued to grow my skills independently, and now I'm working toward a career in 3D generalism, with a particular interest in environment art.I originally got into Blender because SketchUp wasn't free, and I could not keep up with the subscriptions. While searching for alternatives, I came across Blender. That's when I realized I had installed it once years ago, but back then, the interface completely intimidated me, and I gave up on it. This time, though, I decided to stick with it – and I'm glad I did.I started out creating simple models. One of my first big projects was modeling the entire SpongeBob crew. That led to my first animation, and eventually, the first four episodes of a short animated series (though it's still incomplete). As I grew more confident, I began participating in online 3D competitions, like cgandwe, where I focused on designing realistic environments. Those experiences have played a huge role in getting me to where I am today.Getting Started Before starting any scene, I always look for references. It might not be the most original approach, but it's what works best for me. One piece that inspired me was a beautiful artwork by Calder Moore. I bookmarked it as soon as I saw it back in 2023, and luckily, I finally found the time to bring it to life last month.BlockoutThe goal was to match the original camera angle and roughly model the main frame of the structures. It wasn't perfect, but modeling and placing the lower docks helped me get the perspective right. Then I moved on to modeling and positioning the major structures in the scene.I gave myself two weeks to complete this project. And as much as I enjoy modeling, I also enjoy not modeling, so I turned to asset kits and free models to help speed things up. I came across an awesome paid kit by Bigmediumsmall and instantly knew it would fit perfectly into my scene.I also downloaded a few models from Sketchfab, including a lamp, desk console, freighter controls, and a robotic arm, which I later took apart to add extra detail. Another incredibly helpful tool was the Random Flow add-on by BlenderGuppy, which made adding sci-fi elements much easier. Lastly, I pulled in some models from my older sci-fi and cyberpunk projects to round things out.Kitbashing Once I had the overall shape I was aiming for, I moved on to kitbashing to pack in as much detail as possible. There wasn't any strict method to the madness; I simply picked assets I liked, whether it was a set of pipes, vents, or even a random shape that just worked in the sci-fi context. I focused first on kitbashing the front structure, and used the Random Flow add-on to fill in areas where I didn't kitbash manually. Then I moved on to the other collections, following the same process.The freighter was the final piece of the puzzle, and I knew it was going to be a challenge. Part of me wanted to model it entirely from scratch, but the more practical side knew I could save a lot of time by sticking with my usual method. So I modeled the main shapes myself, then kitbashed the details to bring it to life. I also grabbed some crates from Sketchfab to fill out the scene.Texturing This part was easily my favorite, and there was no shortcut here. I had to meticulously create each material myself. Well, I did use PBR materials downloaded from CGAmbient as a base, but I spent a lot of time tweaking and editing them to get everything just right.Texturing has always been my favorite stage when building scenes like this. Many artists prefer external tools like Substance 3D Painter (which I did use for some of the models), but I've learned so much about procedural texturing, especially from RyanKingArt, that I couldn't let it go. It's such a flexible and rewarding approach, and I love pushing it as far as I can.I wanted most of the colors in the scene to be dark, but I did keep the original color of the pipes and the pillars, just to add a little bit of vibrance to the scene. I also wanted the overall texture to be very rough and grungy. One of the biggest helps in achieving this was using the Grunge Maps from Substance 3D Painter. I found a way to extract them into Blender, and it helped.A major tool during the texturing phase was Jsplacement, which I used to procedurally generate sci-fi grids and plates. This was the icing on the cake for adding intricate details. Whenever an area felt too flat, I applied bump maps with these grids and panels to bring the materials to life. For example, both the lamp pole and the entire black metal material feature these Jsplacement Maps.Lighting For this, I didn't do anything fancy. I knew the scene was in a high altitude, so I looked for HDRI with a cloudless sky, and I boosted the saturation up a little to give it that high altitude look.Post-Production The rendering phase was challenging since I was working on a low-end laptop. I couldn't render the entire scene all at once, so I broke it down by collections and rendered them as separate layers. Then, I composited the layers together in post-production. I'm not big on heavy post-work, so I kept it simple, mostly tweaking brightness and saturation on my phone. That's about it for the post-production process.Conclusion The entire project took me 10 days to complete, working at least four hours each day. Although I've expressed my love for texturing, my favorite part of this project was the detailing and kitbashing. I really enjoyed piecing all the small details together. The most challenging part was deciding which assets to use and where to place them. I had a lot of greebles to choose from, but I'm happy with the ones I selected; they felt like a perfect fit for the scene.I know kitbashing sometimes gets a negative reputation in the 3D community, but I found it incredibly relieving. Honestly, this project wouldn't have come together without it, so I fully embraced the process.I'm excited to keep making projects like this. The world of 3D art is truly an endless and vast realm, and I encourage every artist like me to keep exploring it, one project at a time.Denys Molokwu, 3D Artist
    0 Comentários 0 Compartilhamentos 0 Anterior
Páginas Impulsionadas
CGShares https://cgshares.com